Forging Machines; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 48119-48121 [2017-22269]

Agencies

• DEPARTMENT OF LABOR
• Occupational Safety and Health Administration

[Federal Register Volume 82, Number 198 (Monday, October 16, 2017)]
[Notices]
[Pages 48119-48121]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-22269]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0064]


Forging Machines; Extension of the Office of Management and 
Budget's (OMB) Approval of Information Collection (Paperwork) 
Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comment.

-----------------------------------------------------------------------

SUMMARY: OSHA is soliciting public comments concerning its proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements contained in the Forging Machines 
Standard.

DATES: Comments must be submitted (postmarked, sent, or received) by 
December 15, 2017.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at https://www.regulations.gov, the Federal eRulemaking 
Portal. Follow the instructions online for submitting comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using these methods, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0064, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW., Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Docket Office's normal business hours, 10:00 a.m. 
to 3:00 p.m., ET.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the ICR (OSHA-2011-0064). All comments, including any 
personal information you provide, are placed in the public docket 
without change, and may be made available online at https://www.regulations.gov. For further information on submitting comments, 
see the ``Public Participation'' heading in the section of this notice 
titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other materials in the 
docket, go to https://www.regulations.gov

[[Page 48120]]

or the OSHA Docket Office at the address above. All documents in the 
docket (including this Federal Register notice) are listed in the 
https://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection and copying at the OSHA Docket Office. You 
may also contact Theda Kenney at the address below to obtain a copy of 
the ICR.

FOR FURTHER INFORMATION CONTACT:  Theda Kenney, Kenney.Theda@dol.gov or 
Todd Owen, Owen.Todd@dol.gov; telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the Act or for developing information 
regarding the causes and prevention of occupational injuries, 
illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires 
that OSHA obtain such information with minimum burden upon employers, 
especially those operating small businesses, and to reduce to the 
maximum extent feasible unnecessary duplication of efforts in obtaining 
information (29 U.S.C. 657).
    The following sections describe who uses the information collected 
under each requirement, as well as how they use it. The purpose of 
these requirements is to reduce employees' risk of death or serious 
injury by ensuring that forging machines used by them are in safe 
operating condition, and that employees are able to clearly and 
properly identify manually operated valves and switches.
    Inspection of Forging Machines, Guards, and Point-of-Operation 
Protection Devices (paragraphs (a)(2)(i) and (a)(2)(ii)). Paragraph 
(a)(2)(i) requires employers to establish periodic and regular 
maintenance safety checks, and to develop and maintain a certification 
record of each inspection. The certification record must include the 
date of inspection, the signature of the person who performed the 
inspection, and the serial number (or other identifier) of the forging 
machine inspected. Under paragraph (a)(2)(ii), employers are to 
schedule regular and frequent inspections of guards and point-of-
operation protection devices, and prepare a certification record of 
each inspection that contains the date of the inspection, the signature 
of the person who performed the inspection, and the serial number (or 
other identifier) of the equipment inspected. These inspection 
certification records provide assurance to employers, employees, and 
OSHA compliance officers that forging machines, guards, and point-of-
operation protection devices have been inspected, and will operate 
properly and safely, to prevent impact injury and death to employees 
during forging operations. These records also provide the most 
efficient means for the compliance officers to determine that an 
employer is complying with the Standard.
    Identification of Manually Controlled Valves and Switches 
(paragraphs (c), (h)(3), (i)(1) and (i)(2)). These paragraphs require 
proper and clear identification of manually operated valves and 
switches on presses, upsetters, boltheading equipment, and rivet-making 
machines, respectively. Marking valves and switches provide information 
to employees to ensure that they operate the forging machines correctly 
and safely.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply. 
For example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirements contained in the Forging Machines Standard (29 
CFR 1910.218). The Agency is requesting an increase in its current 
burden hours from 187,264 hours to 192,053 hours, a total increase of 
4,789 hours. The adjustment is primarily due to minor modifications in 
calculating burden hours. The Agency will summarize the comments 
submitted in response to this notice and will include this summary in 
the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Forging Machines (29 CFR 1910.218).
    OMB Number: 1218-0228.
    Affected Public: Business or other for-profits.
    Number of Respondents: 27,700.
    Total Responses: 1,440,400.
    Frequency of Responses: Biweekly.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 192,053.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other materials must identify the Agency 
name and the OSHA docket number for the ICR (Docket No. OSHA-2011-
0064). You may supplement submissions by uploading documents 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
and your name, date, and the docket number so the Agency can attach 
them to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627).
    Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth.

[[Page 48121]]

Although all submissions are listed in the https://www.regulations.gov 
index, some information (e.g., copyrighted material) is not publicly 
available to read or download through this Web site.
    All submissions, including copyrighted material, are available for 
inspection and copying at the OSHA Docket Office. Information on using 
the https://www.regulations.gov Web site to submit comments and access 
the docket is available at the Web site's ``User Tips'' link. Contact 
the OSHA Docket Office for information about materials not available 
through the Web site, and for assistance in using the Internet to 
locate docket submissions.

V. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, directed the preparation of this notice. The 
authority for this notice is the Paperwork Reduction Act of 1995 (44 
U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 5-2007 (72 FR 
31159).

    Signed at Washington, DC, on October 10, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-22269 Filed 10-13-17; 8:45 am]
 BILLING CODE 4510-26-P