Accreditation and Approval of Intertek USA, Inc., Savannah, GA, as a Commercial Gauger and Laboratory, 42826-42827 [2017-19265]
Download as PDF
42826
Federal Register / Vol. 82, No. 175 / Tuesday, September 12, 2017 / Notices
hours), Cohort 2 (316.8 hours) and
Cohort 3 (1,742.4 hours) combined
comes to a total estimated burden for
the emailed biannual survey of 3,801.6
hours.
TABLE 1—DATA COLLECTION BURDEN FOR BIANNUAL INFRASTRUCTURE DEVELOPMENT MEASURE FOR COHORTS 1, 2,
AND 3
Number of
respondents
Responses
per
respondent
Total
responses
Hours per
response
Total annual
hour burden
Cohort
Respondent type
1 .....................
2 .....................
3 .....................
Project Director a .....................................
Project Director a .....................................
Project Director a .....................................
11
2
11
2
2
2
22
4
22
12.0
12.0
12.0
264
28
264
Total ........
..................................................................
24
........................
48
........................
556
a Total
PD/PM and total other staff member cost are calculated as hourly wage × time spent on progress report × number of participants.
TABLE 2—ANNUALIZED BURDEN FOR BIANNUAL INFRASTRUCTURE DEVELOPMENT
Respondent type
Number of
respondents
Responses
per
respondent
Total
responses
Hours per
response
Total annual
hour burden
Project Director ....................................................................
11
2
22
12.0
264
Written comments and
recommendations concerning the
proposed information collection should
be sent by October 12, 2017 to the
SAMHSA Desk Officer at the Office of
Information and Regulatory Affairs,
Office of Management and Budget
(OMB). To ensure timely receipt of
comments, and to avoid potential delays
in OMB’s receipt and processing of mail
sent through the U.S. Postal Service,
commenters are encouraged to submit
their comments to OMB via email to:
OIRA_Submission@omb.eop.gov.
Although commenters are encouraged to
send their comments via email,
commenters may also fax their
comments to: 202–395–7285.
Commenters may also mail them to:
Office of Management and Budget,
Office of Information and Regulatory
Affairs, New Executive Office Building,
Room 10102, Washington, DC 20503.
Summer King,
Statistician.
[FR Doc. 2017–19251 Filed 9–11–17; 8:45 am]
BILLING CODE 4162–20–P
pmangrum on DSK3GDR082PROD with NOTICES1
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Approval of Intertek USA, Inc.,
Baytown, TX, as a Commercial Gauger
U.S. Customs and Border
Protection, Department of Homeland
Security.
AGENCY:
VerDate Sep<11>2014
15:19 Sep 11, 2017
Jkt 241001
Notice of approval of Intertek
USA, Inc., Baytown, TX, as a
commercial gauger.
ACTION:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., Baytown, TX, has
been approved to gauge petroleum and
petroleum products for customs
purposes for the next three years as of
September 29, 2014.
DATES: As of September 29, 2014,
Intertek USA, Inc., Baytown, TX, was
reapproved as a Customs-approved
commercial gauger. The next triennial
inspection date will be scheduled for
September 2017.
FOR FURTHER INFORMATION CONTACT: Mr.
Stephen Cassata, Laboratories and
Scientific Services, U.S. Customs and
Border Protection, 1300 Pennsylvania
Avenue NW., Suite 1500N, Washington,
DC 20229, tel. 202–344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.13,
that Intertek USA, Inc., 2612 West Main
St., Baytown, TX 77520, has been
approved to gauge and accredited to test
petroleum and petroleum products in
accordance with the provisions of 19
CFR 151.13. Intertek USA, Inc., is
approved for the following gauging
procedures for petroleum and certain
petroleum products set forth by the
American Petroleum Institute (API):
SUMMARY:
API chapters
Title
3 .....................
7 .....................
8 .....................
12 ...................
Gauging.
Temperature Determination.
Sampling.
Calculation of Petroleum
Quantities.
PO 00000
Frm 00046
Fmt 4703
Sfmt 4703
API chapters
17 ...................
Title
Marine Measurements.
Anyone wishing to employ this entity
to conduct gauger services should
request and receive written assurances
from the entity that it is approved by the
U.S. Customs and Border Protection to
conduct the specific gauger service
requested. Alternatively, inquiries
regarding the specific gauger service this
entity is approved to perform may be
directed to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
cbp.labhq@dhs.gov. Please reference the
Web site listed below for a complete
listing of CBP approved gaugers and
accredited laboratories: https://
www.cbp.gov/about/labs-scientific/
commercial-gaugers-and-laboratories.
Dated: August 31, 2017.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services.
[FR Doc. 2017–19264 Filed 9–11–17; 8:45 am]
BILLING CODE 9111–14–P
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc., Savannah, GA, as a
Commercial Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
AGENCY:
E:\FR\FM\12SEN1.SGM
12SEN1
42827
Federal Register / Vol. 82, No. 175 / Tuesday, September 12, 2017 / Notices
Notice of accreditation and
approval of Intertek USA, Inc.,
Savannah, GA, as a commercial gauger
and laboratory.
ACTION:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., Savannah, GA, has
been approved to gauge and accredited
to test petroleum and petroleum
products for customs purposes for the
next three years as of September 22,
2016.
DATES: As of September 22, 2016,
Intertek USA, Inc., Savannah, GA, was
reapproved as a Customs-approved
commercial gauger and reaccredited as
a Customs-accredited laboratory. The
next triennial inspection date will be
scheduled for September 2019.
SUMMARY:
CBPL No.
27–03
27–04
27–06
27–08
27–11
27–13
ASTM
ASTM
ASTM
ASTM
D445
ASTM
27–48 ................
27–57 ................
D5191
D4006
D95
D473
D86
D4294
Dated: September 5, 2017.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services.
3 .....................
7 .....................
8 .....................
11 ...................
12 ...................
Gauging.
Temperature Determination.
Sampling.
Density Determination.
Calculation of Petroleum
Quantities.
Marine Measurements.
17 ...................
Intertek USA, Inc., is accredited for
the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
DEPARTMENT OF HOMELAND
SECURITY
triennial inspection date will be
scheduled for July 2019.
U.S. Customs and Border Protection
FOR FURTHER INFORMATION CONTACT:
Accreditation of Intertek USA, Inc.,
Yabucoa, PR, as a Commercial
Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
AGENCY:
Notice of accreditation of
Intertek USA, Inc., Yabucoa, PR, as a
commercial laboratory.
ACTION:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., Yabucoa, PR, has
been accredited to test petroleum and
petroleum products for customs
purposes for the next three years as of
July 7, 2016.
SUMMARY:
As of July 7, 2016, Intertek USA,
Inc., Yabucoa, PR, was reaccredited as a
Customs-accredited laboratory. The next
DATES:
[FR Doc. 2017–19265 Filed 9–11–17; 8:45 am]
BILLING CODE 9111–14–P
Method
Mr.
Stephen Cassata, Laboratories and
Scientific Services, U.S. Customs and
Border Protection, 1300 Pennsylvania
Avenue NW., Suite 1500N, Washington,
DC 20229, tel. 202–344–1060.
Notice is
hereby given pursuant to 19 CFR 151.12,
that Intertek USA, Inc., Road #901, Km.
2.7, Bo. Camino Nuevo, Yabucoa, PR
00767–0186, has been accredited to test
petroleum and petroleum products in
accordance with the provisions of 19
CFR 151.12. Intertek USA, Inc., is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
SUPPLEMENTARY INFORMATION:
Title
27–01 ................
27–02 ................
ASTM D287
ASTM D1298
27–08 ................
ASTM D86
15:19 Sep 11, 2017
Title
Standard Test Method for Water in Crude Oil by Distillation.
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Standard test method for sulfur in petroleum and petroleum products by energy-dispersive x-ray fluorescence spectrometry.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive XRay Fluorescence Spectrometry.
Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method).
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
cbp.labhq@dhs.gov. Please reference the
Web site listed below for a complete
listing of CBP approved gaugers and
accredited laboratories: https://
www.cbp.gov/about/labs-scientific/
commercial-gaugers-and-laboratories.
CBPL No.
API chapters
Title
D4052
D7039
27–58 ................
pmangrum on DSK3GDR082PROD with NOTICES1
Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 312 Carolan St., Savannah, GA
31415, has been approved to gauge and
accredited to test petroleum and
petroleum products in accordance with
the provisions of 19 CFR 151.12 and 19
CFR 151.13. Intertek USA, Inc., is
approved for the following gauging
procedures for petroleum and certain
petroleum products set forth by the
American Petroleum Institute (API):
SUPPLEMENTARY INFORMATION:
Method
................
................
................
................
................
................
VerDate Sep<11>2014
Mr.
Stephen Cassata, Laboratories and
Scientific Services, U.S. Customs and
Border Protection, 1300 Pennsylvania
Avenue NW., Suite 1500N, Washington,
DC 20229, tel. 202–344–1060.
FOR FURTHER INFORMATION CONTACT:
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum
and Liquid Petroleum Products by Hydrometer Method.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Jkt 241001
PO 00000
Frm 00047
Fmt 4703
Sfmt 4703
E:\FR\FM\12SEN1.SGM
12SEN1
Agencies
[Federal Register Volume 82, Number 175 (Tuesday, September 12, 2017)]
[Notices]
[Pages 42826-42827]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-19265]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc., Savannah, GA,
as a Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
[[Page 42827]]
ACTION: Notice of accreditation and approval of Intertek USA, Inc.,
Savannah, GA, as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc., Savannah, GA, has been approved to gauge and
accredited to test petroleum and petroleum products for customs
purposes for the next three years as of September 22, 2016.
DATES: As of September 22, 2016, Intertek USA, Inc., Savannah, GA, was
reapproved as a Customs-approved commercial gauger and reaccredited as
a Customs-accredited laboratory. The next triennial inspection date
will be scheduled for September 2019.
FOR FURTHER INFORMATION CONTACT: Mr. Stephen Cassata, Laboratories and
Scientific Services, U.S. Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202-
344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 312 Carolan St.,
Savannah, GA 31415, has been approved to gauge and accredited to test
petroleum and petroleum products in accordance with the provisions of
19 CFR 151.12 and 19 CFR 151.13. Intertek USA, Inc., is approved for
the following gauging procedures for petroleum and certain petroleum
products set forth by the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................. Gauging.
7................................. Temperature Determination.
8................................. Sampling.
11................................ Density Determination.
12................................ Calculation of Petroleum Quantities.
17................................ Marine Measurements.
------------------------------------------------------------------------
Intertek USA, Inc., is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
------------------------------------------------------------------------
CBPL No. Method Title
------------------------------------------------------------------------
27-03................... ASTM D4006 Standard Test Method
for Water in Crude Oil
by Distillation.
27-04................... ASTM D95 Standard Test Method
for Water in Petroleum
Products and
Bituminous Materials
by Distillation.
27-06................... ASTM D473 Standard Test Method
for Sediment in Crude
Oils and Fuel Oils by
the Extraction Method.
27-08................... ASTM D86 Standard Test Method
for Distillation of
Petroleum Products at
Atmospheric Pressure.
27-11................... D445 Standard Test Method
for Kinematic
Viscosity of
Transparent and Opaque
Liquids.
27-13................... ASTM D4294 Standard test method
for sulfur in
petroleum and
petroleum products by
energy-dispersive x-
ray fluorescence
spectrometry.
27-48................... D4052 Standard Test Method
for Density and
Relative Density of
Liquids by Digital
Density Meter.
27-57................... D7039 Standard Test Method
for Sulfur in Gasoline
and Diesel Fuel by
Monochromatic
Wavelength Dispersive
X-Ray Fluorescence
Spectrometry.
27-58................... D5191 Standard Test Method
For Vapor Pressure of
Petroleum Products
(Mini Method).
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please
reference the Web site listed below for a complete listing of CBP
approved gaugers and accredited laboratories: https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
Dated: September 5, 2017.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services.
[FR Doc. 2017-19265 Filed 9-11-17; 8:45 am]
BILLING CODE 9111-14-P