Foreign-Trade Zone (FTZ) 39-Dallas-Fort Worth, Texas; Authorization of Production Activity, Valeo North America, Inc., d/b/a Valeo Compressor North America (Motor Vehicle Air-Conditioner Compressors), Dallas, Texas, 41208 [2017-18440]

Download as PDF 41208 Federal Register / Vol. 82, No. 167 / Wednesday, August 30, 2017 / Notices public comment (82 FR 26433, June 7, 2017). On August 15, 2017, the applicant was notified of the FTZ Board’s decision that no further review of the activity is warranted at this time. The production activity described in the notification was authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: August 24, 2017. Andrew McGilvray, Executive Secretary. [FR Doc. 2017–18439 Filed 8–29–17; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [S–102–2017] Approval of Expanded Subzone Status, 5.11, Inc.; Modesto, Lathrop and Manteca, California On June 29, 2017, the Executive Secretary of the Foreign-Trade Zones (FTZ) Board docketed an application submitted by the Port of Stockton, grantee of FTZ 231, requesting expanded subzone status subject to the existing activation limit of FTZ 231, on behalf of 5.11, Inc., in Manteca, California. The application was processed in accordance with the FTZ Act and Regulations, including notice in the Federal Register inviting public comment (82 FR 31291, July 6, 2017). The FTZ staff examiner reviewed the application and determined that it meets the criteria for approval. Pursuant to the authority delegated to the FTZ Board Executive Secretary (15 CFR Sec. 400.36(f)), the application to expand Subzone 231B was approved on August 17, 2017, subject to the FTZ Act and the Board’s regulations, including Section 400.13, and further subject to FTZ 231’s 2,000-acre activation limit. Dated: August 24, 2017. Andrew McGilvray, Executive Secretary. [FR Doc. 2017–18435 Filed 8–29–17; 8:45 am] mstockstill on DSK30JT082PROD with NOTICES BILLING CODE 3510–DS–P VerDate Sep<11>2014 17:40 Aug 29, 2017 Jkt 241001 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–25–2017] Foreign-Trade Zone (FTZ) 39—DallasFort Worth, Texas; Authorization of Production Activity, Valeo North America, Inc., d/b/a Valeo Compressor North America (Motor Vehicle AirConditioner Compressors), Dallas, Texas On April 12, 2017, Valeo North America, Inc. d/b/a Valeo Compressor North America, submitted a notification of proposed production activity to the FTZ Board within FTZ 39—Site 1, in Dallas, Texas. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (82 FR 26435, June 7, 2017). On August 15, 2017, the applicant was notified of the FTZ Board’s decision that no further review of the activity is warranted at this time. The production activity described in the notification was authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: August 24, 2017. Andrew McGilvray, Executive Secretary. [FR Doc. 2017–18440 Filed 8–29–17; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–053–2017] Foreign-Trade Zone (FTZ) 26—Atlanta, Georgia; Notification of Proposed Production Activity; Nisshinbo Automotive Manufacturing, Inc. (Automotive Brake Linings, Pads, and Disc Pads Assembly and Production); Covington, Georgia The Georgia Foreign Trade Zone, Inc., grantee of FTZ 26, submitted a notification of proposed production activity to the FTZ Board on behalf of Nisshinbo Automotive Manufacturing, Inc. (Nisshinbo), located in Covington, Georgia. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on August 10, 2017. The Nisshinbo facility is located within Site 33 of FTZ 26. The facility will be used to assemble and produce automotive brake pads. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Nisshinbo from customs duty payments on the foreign-status components used in export production. On its domestic sales, for the foreignstatus materials/components noted below, Nisshinbo would be able to choose the duty rates during customs entry procedures that apply to: Brake linings and pads, and brake disc pads (duty rate ranging from free to 2.5%). Nisshinbo would be able to avoid duty on foreign-status components which become scrap/waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Natural graphite powder; natural graphite; kaolinite clay; magnesium oxide; slaked lime; mica powder; vermiculite; synthetic zeolite; antimony trisulfide; carbon black; carbon fiber; crystalline silica, quartz; spherical silica powder; zinc powder; white fused alumina; aluminum oxide; black iron oxide; zirconium oxide; antimony trioxide; calcium fluoride; zinc sulfide; barium sulfate; calcium carbonate; rubber with calcium carbonate; sepiolite; calcium silicate; potassium titanate; salts of inorganic acids; calcium hydride; dicumyl peroxide with calcium carbonate; stearic acid from saturated acyclic monocarboxylic acids (zinc stearic acid); paints and varnishes (including enamels and lacquers) based on synthetic polymers in a non-aqueous medium hematite; artificial graphite plates, rods, powder and other forms for manufacturing pitch cokes; artificial graphite powder; silicone rubber coated cashew particle; phenolic resin; synthetic-amorphous silica; black silicon carbide; silicone rubber; cashew dust from cashew nut shell; friction dust from manufacturing grinding process; cellulose fiber; acrylonitrile/butadiene; tire rubber crumb—ground tires through a special milling procedure; rubber powder; styrene-butadiene rubber; rock wool fiber; brake linings (not mounted); ceramic fiber; microblast of other mineral substances; glass chopped strand; chopped stainless steel wire fiber; copper powder; copper fiber; bronze fiber; aluminum grain; alumina powder; atomized tin powder; tin sulfide powder; zirconium silicate; zircon flour; and, backing plates/disc pads (duty rate ranges from free to 6.5%). E:\FR\FM\30AUN1.SGM 30AUN1

Agencies

[Federal Register Volume 82, Number 167 (Wednesday, August 30, 2017)]
[Notices]
[Page 41208]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-18440]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-25-2017]


Foreign-Trade Zone (FTZ) 39--Dallas-Fort Worth, Texas; 
Authorization of Production Activity, Valeo North America, Inc., d/b/a 
Valeo Compressor North America (Motor Vehicle Air-Conditioner 
Compressors), Dallas, Texas

    On April 12, 2017, Valeo North America, Inc. d/b/a Valeo Compressor 
North America, submitted a notification of proposed production activity 
to the FTZ Board within FTZ 39--Site 1, in Dallas, Texas.
    The notification was processed in accordance with the regulations 
of the FTZ Board (15 CFR part 400), including notice in the Federal 
Register inviting public comment (82 FR 26435, June 7, 2017). On August 
15, 2017, the applicant was notified of the FTZ Board's decision that 
no further review of the activity is warranted at this time. The 
production activity described in the notification was authorized, 
subject to the FTZ Act and the FTZ Board's regulations, including 
Section 400.14.

    Dated: August 24, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017-18440 Filed 8-29-17; 8:45 am]
 BILLING CODE 3510-DS-P