August 1, 2017 – Federal Register Recent Federal Regulation Documents

Results 101 - 114 of 114
Certain Seamless Carbon and Alloy Steel Standard, Line, and Pressure Pipe From Germany; Institution of a Five-Year Review
Document Number: 2017-15935
Type: Notice
Date: 2017-08-01
Agency: International Trade Commission, Agencies and Commissions
The Commission hereby gives notice that it has instituted a review pursuant to the Tariff Act of 1930 (``the Act''), as amended, to determine whether revocation of the antidumping duty order on certain seamless carbon and alloy steel standard, line, and pressure pipe (``certain seamless pipe'') from Germany would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission.
Freedom of Information Act Regulations
Document Number: 2017-15887
Type: Proposed Rule
Date: 2017-08-01
Agency: National Capital Planning Commission, Agencies and Commissions
The National Capital Planning Commission (NCPC or Commission) proposes to revise its current Freedom of Information Act (FOIA) Regulations. NCPC must comply with the requirements of FOIA when it process requests for Information submitted pursuant to FOIA.
Privacy Act Regulations
Document Number: 2017-15882
Type: Proposed Rule
Date: 2017-08-01
Agency: National Capital Planning Commission, Agencies and Commissions
The National Capital Planning Commission (NCPC or Commission) proposes to adopt new regulations governing NCPC's implementation of the Privacy Act, as amended and the privacy provisions of the E- Government Act of 2002. NCPC must comply with the requirements of the Privacy Act and the privacy provisions of the E-Government Act of 2002 for records maintained on individuals and personal information stored as a hard copy or electronically.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-15808
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-600R series airplanes, Model A300 C4-605R Variant F airplanes, and Model A300 F4-600R series airplanes. This AD was prompted by the results of a full stress analysis of the lower area of a certain frame that revealed that a crack could occur in this area after a certain number of flight cycles. This AD requires an inspection of the lower area of a certain frame radius for cracking, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (Embraer)
Document Number: 2017-15807
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (Embraer) Model EMB-135ER, - 135KE, -135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This AD was prompted by a report of airplanes with modified gust lock levers that prevented the thrust lever's full excursion, thus limiting the engine power. This AD requires replacing a certain gust lock lever. We are issuing this AD to address the unsafe condition on these products.
Schedule for Rating Disabilities; Musculoskeletal System and Muscle Injuries
Document Number: 2017-15766
Type: Proposed Rule
Date: 2017-08-01
Agency: Department of Veterans Affairs
The Department of Veterans Affairs (VA) proposes to revise the regulations that involve the Musculoskeletal System within the VA Schedule for Rating Disabilities (``VASRD'' or ``Rating Schedule''). VA proposes to rename certain diagnostic codes, revise rating criteria, give new rating guidance, add new codes, and remove obsolete codes. These revisions would incorporate medical terminology more recent than the last comprehensive review, as well as simplify the rating process.
Requirements for Insurance; National Credit Union Share Insurance Fund Equity Distributions
Document Number: 2017-15687
Type: Proposed Rule
Date: 2017-08-01
Agency: National Credit Union Administration, Agencies and Commissions
The NCUA Board (Board) proposes to amend its share insurance requirements rule to provide federally insured credit unions (FICUs) with greater transparency regarding the calculation of a FICU's proportionate share of a declared equity distribution from the National Credit Union Share Insurance Fund (NCUSIF) and to add a temporary provision to govern NCUSIF equity distributions resulting from the Corporate System Resolution Program. The Board also proposes to prohibit a FICU that terminates federal share insurance coverage during a particular calendar year from receiving an NCUSIF equity distribution for that calendar year to provide greater fairness to FICUs that remain federally insured. The Board proposes to make technical and conforming amendments to other aspects of the share insurance requirements rule in light of these proposed changes.
Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes
Document Number: 2017-15669
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Diamond Aircraft Industries GmbH Model DA 42 airplanes. This AD requires installing engine exhaust pipe clamps with spring washers, repetitively inspecting the engine exhaust pipe clamps for cracks, and replacing the clamps if found cracked. This AD was prompted by cracks in the affected engine exhaust pipes, which could cause failure of the propeller regulating valve because of hot exhaust gases coming from the fractured pipes. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. (Type Certificate Previously Held by Canadair Limited) Airplanes
Document Number: 2017-15555
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-215-6B11 (CL-415 Variant) airplanes. This AD was prompted by a report indicating that an oxygen bottle was found loose while the clamp strap was in the locked position. This AD requires modification of the clamp strap and installation of additional shims, as applicable, to the flight crew's oxygen bottles' retaining structures. We are issuing this AD to address the unsafe condition on these products.
Cross-Media Electronic Reporting: Authorized Program Revision Approval, State of Wisconsin
Document Number: 2017-15544
Type: Notice
Date: 2017-08-01
Agency: Environmental Protection Agency
This notice announces EPA's approval of the State of Wisconsin's request to revise/modify certain of its EPA-authorized programs to allow electronic reporting.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15486
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 airplanes. This AD was prompted by a determination that the shoulder bolt used on the outboard clevis of the forward support fitting of the ram air turbine (RAT) might not be long enough to allow for proper installation of the RAT; therefore, the clevis of the joint could be clamped together, resulting in reduced fatigue life and possible fracture of the clevis. This AD requires inspecting for cracking of the clevis of the forward support fitting of the RAT, installing a longer shoulder bolt, and replacing the forward support fitting if any cracking is found. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15477
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the lower skin at the skin lap splice lower fastener row is subject to widespread fatigue damage (WFD). This AD requires repetitive inspections for cracking in the skin lap splice at the lower fastener row, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-15476
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes. This AD was prompted by reports of undamped main landing gear (MLG) extension in-service. This AD requires replacement of the MLG retraction actuator rod-ends on both MLG assemblies. We are issuing this AD to address the unsafe condition on these products.
Privacy Act of 1974; Implementation
Document Number: 2017-15423
Type: Rule
Date: 2017-08-01
Agency: Department of Justice
The Federal Bureau of Investigation (FBI), a component of the United States Department of Justice (DOJ or Department), is issuing a final rule to amend its Privacy Act exemption regulations for the system of records titled, ``Next Generation Identification (NGI) System,'' JUSTICE/FBI-009, last published in full on May 5, 2016. Specifically, the FBI exempts the records maintained in JUSTICE/FBI-009 from one or more provisions of the Privacy Act. The listed exemptions are necessary to avoid interference with the Department's law enforcement and national security functions and responsibilities of the FBI. This document addresses public comments on the proposed rule.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.