Accreditation and Approval of Intertek USA, Inc., as a Commercial Gauger and Laboratory, 34685 [2017-15638]
Download as PDF
34685
Federal Register / Vol. 82, No. 142 / Wednesday, July 26, 2017 / Notices
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc., as a Commercial Gauger
and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Intertek USA, Inc., as a
commercial gauger and laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes for the
next three years as of February 8, 2017.
SUMMARY:
CBPL No.
ASTM
..............
..............
..............
..............
..............
D287
D473
D86
D445
D4294
27–14
27–48
27–50
27–53
27–54
27–57
..............
..............
..............
..............
..............
..............
D2622
D4052
D93
D2709
D1796
D7039
27–58 ..............
mstockstill on DSK30JT082PROD with NOTICES
27–01
27–06
27–08
27–11
27–13
D5191
API chapters
1 .....................
3 .....................
7 .....................
8 .....................
12 ...................
17 ...................
Title
Vocabulary.
Tank gauging.
Temperature determination.
Sampling.
Calculations.
Maritime measurement.
Intertek USA, Inc., is accredited for
the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Distillation of Petroleum Products.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
Spectrometry.
Standard Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Methods).
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method.
Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-Ray Fluorescence Spectrometry.
Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method).
Dated: July 18, 2017.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2017–15638 Filed 7–25–17; 8:45 am]
BILLING CODE 9111–14–P
17:49 Jul 25, 2017
CFR 151.12 and 19 CFR 151.13. Intertek
USA, Inc., is approved for the following
gauging procedures for petroleum and
certain petroleum products from the
American Petroleum Institute (API):
Title
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the Web site listed below for
a complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
VerDate Sep<11>2014
The accreditation and approval
of Intertek USA, Inc., as commercial
gauger and laboratory became effective
on February 8, 2017. The next triennial
inspection date will be scheduled for
February 2020.
FOR FURTHER INFORMATION CONTACT:
Christopher J. Mocella, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202–
344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 481A East Shore Parkway, New
Haven, CT 06512, has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
DATES:
DEPARTMENT OF HOMELAND
SECURITY
Jkt 241001
DEPARTMENT OF HOUSING AND
URBAN DEVELOPMENT
[Docket No. FR–6015–N–02]
Mortgage and Loan Insurance
Programs Under the National Housing
Act—Debenture Interest Rates
Office of the Assistant
Secretary for Housing, HUD.
ACTION: Notice.
AGENCY:
This Notice announces
changes in the interest rates to be paid
on debentures issued with respect to a
loan or mortgage insured by the Federal
Housing Administration under the
provisions of the National Housing Act
(the Act). The interest rate for
debentures issued under Section
221(g)(4) of the Act during the 6-month
period beginning July 1, 2017, is 21⁄4
percent. The interest rate for debentures
issued under any other provision of the
Act is the rate in effect on the date that
the commitment to insure the loan or
mortgage was issued, or the date that the
loan or mortgage was endorsed (or
SUMMARY:
PO 00000
Frm 00063
Fmt 4703
Sfmt 4703
initially endorsed if there are two or
more endorsements) for insurance,
whichever rate is higher. The interest
rate for debentures issued under these
other provisions with respect to a loan
or mortgage committed or endorsed
during the 6-month period beginning
July 1, 2017, is 27⁄8 percent.
FOR FURTHER INFORMATION CONTACT:
Yong Sun, Department of Housing and
Urban Development, 451 Seventh Street
SW., Room 5148, Washington, DC
20410–8000; telephone (202) 402–4778
(this is not a toll-free number).
Individuals with speech or hearing
impairments may access this number
through TTY by calling the toll-free
Federal Information Relay Service at
(800) 877–8339.
SUPPLEMENTARY INFORMATION: Section
224 of the National Housing Act (12
U.S.C. 1715o) provides that debentures
issued under the Act with respect to an
insured loan or mortgage (except for
debentures issued pursuant to Section
221(g)(4) of the Act) will bear interest at
the rate in effect on the date the
E:\FR\FM\26JYN1.SGM
26JYN1
Agencies
[Federal Register Volume 82, Number 142 (Wednesday, July 26, 2017)]
[Notices]
[Page 34685]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-15638]
[[Page 34685]]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc., as a Commercial
Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Intertek USA, Inc., as
a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc., has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes for the next three years as of
February 8, 2017.
DATES: The accreditation and approval of Intertek USA, Inc., as
commercial gauger and laboratory became effective on February 8, 2017.
The next triennial inspection date will be scheduled for February 2020.
FOR FURTHER INFORMATION CONTACT: Christopher J. Mocella, Laboratories
and Scientific Services Directorate, U.S. Customs and Border
Protection, 1300 Pennsylvania Avenue NW., Suite 1500N, Washington, DC
20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 481A East Shore
Parkway, New Haven, CT 06512, has been approved to gauge petroleum and
certain petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13. Intertek USA, Inc., is
approved for the following gauging procedures for petroleum and certain
petroleum products from the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
1......................................... Vocabulary.
3......................................... Tank gauging.
7......................................... Temperature determination.
8......................................... Sampling.
12........................................ Calculations.
17........................................ Maritime measurement.
------------------------------------------------------------------------
Intertek USA, Inc., is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-01................... D287 Standard Test Method for
API Gravity of Crude
Petroleum and Petroleum
Products (Hydrometer
Method).
27-06................... D473 Standard Test Method for
Sediment in Crude Oils
and Fuel Oils by the
Extraction Method.
27-08................... D86 Standard Test Method for
Distillation of Petroleum
Products.
27-11................... D445 Standard Test Method for
Kinematic Viscosity of
Transparent and Opaque
Liquids.
27-13................... D4294 Standard Test Method for
Sulfur in Petroleum and
Petroleum Products by
Energy-Dispersive X-ray
Fluorescence
Spectrometry.
27-14................... D2622 Standard Test Method for
Sulfur in Petroleum
Products (X-Ray
Spectrographic Methods).
27-48................... D4052 Standard Test Method for
Density and Relative
Density of Liquids by
Digital Density Meter.
27-50................... D93 Standard Test Methods for
Flash-Point by Pensky-
Martens Closed Cup
Tester.
27-53................... D2709 Standard Test Method for
Water and Sediment in
Middle Distillate Fuels
by Centrifuge.
27-54................... D1796 Standard Test Method for
Water and Sediment in
Fuel Oils by the
Centrifuge Method.
27-57................... D7039 Standard Test Method for
Sulfur in Gasoline and
Diesel Fuel by
Monochromatic Wavelength
Dispersive X-Ray
Fluorescence
Spectrometry.
27-58................... D5191 Standard Test Method For
Vapor Pressure of
Petroleum Products (Mini
Method).
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov.
Please reference the Web site listed below for a complete listing of
CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
Dated: July 18, 2017.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2017-15638 Filed 7-25-17; 8:45 am]
BILLING CODE 9111-14-P