Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting, 30822 [2017-13870]

Download as PDF 30822 Federal Register / Vol. 82, No. 126 / Monday, July 3, 2017 / Notices stationary oil/gas drilling rigs and related subassemblies within Site 1 of FTZ 265. The current request would add a foreign status material/component to the scope of authority. Pursuant to 15 CFR 400.14(b), additional FTZ authority would be limited to the specific foreignstatus material/component described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Bauer from customs duty payments on the foreign-status material/ component used in export production. On its domestic sales, for the foreignstatus material/component noted below Bauer would be able to choose the duty rates during customs entry procedures that apply to the company’s finished products previously approved by the FTZ Board (duty rate ranges from dutyfree to 5%). Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The material/component sourced from abroad is: Hydraulic roughneck (duty-free). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is August 14, 2017. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: June 27, 2017. Elizabeth Whiteman, Acting Executive Secretary. [FR Doc. 2017–13945 Filed 6–30–17; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE sradovich on DSK3GMQ082PROD with NOTICES Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on July 25, 2017, 9:30 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., VerDate Sep<11>2014 17:53 Jun 30, 2017 Jkt 241001 Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to sensors and instrumentation equipment and technology. DEPARTMENT OF COMMERCE Agenda The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on August 8, 2017, 9:00 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. Public Session 1. Welcome and Introductions 2. Remarks From the Bureau of Industry and Security Management 3. Industry Presentations 4. New Business Closed Session 5. Discussion of Matters Determined to be Exempt From the Provisions Relating to Public Meetings Found in 5 U.S.C. App. 2 §§ 10(a)(1) and 10(a)(3) The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov no later than July 18, 2017. A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to the Committee members, the Committee suggests that the materials be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the General Counsel, formally determined on January 12, 2017 pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d), that the portion of this meeting dealing with pre-decisional changes to the Commerce Control List and U.S. export control policies shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information contact Yvette Springer on (202) 482–2813. Yvette Springer, Committee Liaison Officer. [FR Doc. 2017–13870 Filed 6–30–17; 8:45 am] BILLING CODE P PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting Agenda Open Session: 1. Opening remarks and introductions. 2. Presentation of papers and comments by the Public. 3. Discussions on results from last, and proposals from last Wassenaar meeting. 4. Report on proposed and recently issued changes to the Export Administration Regulations. 5. Other business. Closed Session: 6. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov, no later than August 1, 2017. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate the distribution of public presentation materials to the Committee members, the Committee suggests that presenters forward the public presentation materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on February 15, 2017, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d)), that the portion of the meeting dealing with E:\FR\FM\03JYN1.SGM 03JYN1

Agencies

[Federal Register Volume 82, Number 126 (Monday, July 3, 2017)]
[Notices]
[Page 30822]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-13870]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Bureau of Industry and Security


Sensors and Instrumentation Technical Advisory Committee; Notice 
of Partially Closed Meeting

    The Sensors and Instrumentation Technical Advisory Committee 
(SITAC) will meet on July 25, 2017, 9:30 a.m., in the Herbert C. Hoover 
Building, Room 3884, 14th Street between Constitution and Pennsylvania 
Avenues NW., Washington, DC. The Committee advises the Office of the 
Assistant Secretary for Export Administration on technical questions 
that affect the level of export controls applicable to sensors and 
instrumentation equipment and technology.

Agenda

Public Session

1. Welcome and Introductions
2. Remarks From the Bureau of Industry and Security Management
3. Industry Presentations
4. New Business

Closed Session

5. Discussion of Matters Determined to be Exempt From the Provisions 
Relating to Public Meetings Found in 5 U.S.C. App. 2 Sec. Sec.  
10(a)(1) and 10(a)(3)

    The open session will be accessible via teleconference to 20 
participants on a first come, first serve basis. To join the 
conference, submit inquiries to Ms. Yvette Springer at 
Yvette.Springer@bis.doc.gov no later than July 18, 2017.
    A limited number of seats will be available during the public 
session of the meeting. Reservations are not accepted. To the extent 
that time permits, members of the public may present oral statements to 
the Committee. The public may submit written statements at any time 
before or after the meeting. However, to facilitate distribution of 
public presentation materials to the Committee members, the Committee 
suggests that the materials be forwarded before the meeting to Ms. 
Springer.
    The Assistant Secretary for Administration, with the concurrence of 
the General Counsel, formally determined on January 12, 2017 pursuant 
to Section 10(d) of the Federal Advisory Committee Act, as amended (5 
U.S.C. app. 2 Sec.  10(d), that the portion of this meeting dealing 
with pre-decisional changes to the Commerce Control List and U.S. 
export control policies shall be exempt from the provisions relating to 
public meetings found in 5 U.S.C. app. 2 Sec. Sec.  10(a)(1) and 
10(a)(3). The remaining portions of the meeting will be open to the 
public.
    For more information contact Yvette Springer on (202) 482-2813.

Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2017-13870 Filed 6-30-17; 8:45 am]
 BILLING CODE P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.