Foreign-Trade Zone 19-Omaha, Nebraska, Application for Reorganization Under Alternative Site Framework, 26435 [2017-11834]
Download as PDF
Federal Register / Vol. 82, No. 108 / Wednesday, June 7, 2017 / Notices
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–31–2017]
sradovich on DSK3GMQ082PROD with NOTICES
Foreign-Trade Zone 19—Omaha,
Nebraska, Application for
Reorganization Under Alternative Site
Framework
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Greater Omaha Chamber of
Commerce, grantee of FTZ 19,
requesting authority to reorganize the
zone under the alternative site
framework (ASF) adopted by the FTZ
Board (15 CFR Sec. 400.2(c)). The ASF
is an option for grantees for the
establishment or reorganization of zones
and can permit significantly greater
flexibility in the designation of new
subzones or ‘‘usage-driven’’ FTZ sites
for operators/users located within a
grantee’s ‘‘service area’’ in the context of
the FTZ Board’s standard 2,000-acre
activation limit for a zone. The
application was submitted pursuant to
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the Board (15 CFR part
400). It was formally docketed on May
15, 2017.
FTZ 19 was approved by the FTZ
Board on January 27, 1983 (Board Order
204, 48 FR 5772, February 8, 1983). The
current zone includes the following
sites: Site 1 (17 acres)—Cargo Zone,
LLC, 6200 North 16th Street, Omaha;
and, Site 2 (38 acres)—Riverfront
Industrial Park, Abbott Drive and Crown
Point Avenue, Omaha.
The grantee’s proposed service area
under the ASF would be Burt, Cass,
Dodge, Douglas, Sarpy, Saunders and
Washington Counties, Nebraska, as
described in the application. If
approved, the grantee would be able to
serve sites throughout the service area
based on companies’ needs for FTZ
designation. The application indicates
that the proposed service area is within
and adjacent to the Omaha, Nebraska
U.S. Customs and Border Protection
port of entry.
The applicant is requesting authority
to reorganize its existing zone to include
both sites as ‘‘magnet’’ sites. The ASF
allows for the possible exemption of one
magnet site from the ‘‘sunset’’ time
limits that generally apply to sites under
the ASF, and the applicant proposes
that Site 1 be so exempted. No
subzones/usage-driven sites are being
requested at this time. The application
would have no impact on FTZ 19’s
previously authorized subzone.
In accordance with the FTZ Board’s
regulations, Christopher Kemp of the
VerDate Sep<11>2014
16:37 Jun 06, 2017
Jkt 241001
FTZ Staff is designated examiner to
evaluate and analyze the facts and
information presented in the application
and case record and to report findings
and recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is August
7, 2017. Rebuttal comments in response
to material submitted during the
foregoing period may be submitted
during the subsequent 15-day period to
August 21, 2017.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Christopher Kemp at
Christopher.Kemp@trade.gov or (202)
482–0862.
Dated: June 2, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017–11834 Filed 6–6–17; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–25–2017]
Foreign-Trade Zone (FTZ) 39—DallasFort Worth, Texas, Notification of
Proposed Production Activity, Valeo
North America, Inc., d/b/a Valeo
Compressor North America, (Motor
Vehicle Air-Conditioner Compressors),
Dallas, Texas
Valeo North America, Inc. d/b/a Valeo
Compressor North America (Valeo),
submitted a notification of proposed
production activity to the FTZ Board for
its facility in Dallas, Texas, within FTZ
39-Site 1. The notification conforming
to the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on April 12, 2017.
Valeo already has authority to
produce air-conditioner compressor
assemblies for motor vehicles. The
current request would add certain
foreign-status components to the scope
of authority. Pursuant to 15 CFR
400.14(b), additional FTZ authority
would be limited to the specific foreign
status components described in the
submitted notification (as described
PO 00000
Frm 00013
Fmt 4703
Sfmt 4703
26435
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt Valeo from customs duty
payments on the foreign status
components used in export production.
On its domestic sales, Valeo would be
able to choose the duty rates during
customs entry procedures that apply to
air-conditioner compressor assemblies
and electromagnetic compressor/clutch
assemblies in the company’s existing
scope of authority (duty rate ranges from
free to 3.1%). Customs duties also could
possibly be deferred or reduced on
foreign-status production equipment.
The components sourced from abroad
include: Stainless steel bolts; stainless
steel screws (less than and more than
6mm in diameters); and,
electromagnetic shims and rings (duty
rate ranges from free to 8.5%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is July
17, 2017.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
Web site, which is accessible via
www.trade.gov/ftz.
For further information, contact
Christopher Wedderburn at
Chris.Wedderburn@trade.gov or (202)
482–1963.
Dated: June 2, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017–11836 Filed 6–6–17; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–848]
Freshwater Crawfish Tail Meat From
the People’s Republic of China:
Preliminary Results of Antidumping
Duty Administrative Review,
Rescission of Review in Part, and
Preliminary Intent To Rescind New
Shipper Review; 2015–2016
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(the Department) is conducting an
administrative review and a new
AGENCY:
E:\FR\FM\07JNN1.SGM
07JNN1
Agencies
[Federal Register Volume 82, Number 108 (Wednesday, June 7, 2017)]
[Notices]
[Page 26435]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-11834]
[[Page 26435]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-31-2017]
Foreign-Trade Zone 19--Omaha, Nebraska, Application for
Reorganization Under Alternative Site Framework
An application has been submitted to the Foreign-Trade Zones (FTZ)
Board by the Greater Omaha Chamber of Commerce, grantee of FTZ 19,
requesting authority to reorganize the zone under the alternative site
framework (ASF) adopted by the FTZ Board (15 CFR Sec. 400.2(c)). The
ASF is an option for grantees for the establishment or reorganization
of zones and can permit significantly greater flexibility in the
designation of new subzones or ``usage-driven'' FTZ sites for
operators/users located within a grantee's ``service area'' in the
context of the FTZ Board's standard 2,000-acre activation limit for a
zone. The application was submitted pursuant to the Foreign-Trade Zones
Act, as amended (19 U.S.C. 81a-81u), and the regulations of the Board
(15 CFR part 400). It was formally docketed on May 15, 2017.
FTZ 19 was approved by the FTZ Board on January 27, 1983 (Board
Order 204, 48 FR 5772, February 8, 1983). The current zone includes the
following sites: Site 1 (17 acres)--Cargo Zone, LLC, 6200 North 16th
Street, Omaha; and, Site 2 (38 acres)--Riverfront Industrial Park,
Abbott Drive and Crown Point Avenue, Omaha.
The grantee's proposed service area under the ASF would be Burt,
Cass, Dodge, Douglas, Sarpy, Saunders and Washington Counties,
Nebraska, as described in the application. If approved, the grantee
would be able to serve sites throughout the service area based on
companies' needs for FTZ designation. The application indicates that
the proposed service area is within and adjacent to the Omaha, Nebraska
U.S. Customs and Border Protection port of entry.
The applicant is requesting authority to reorganize its existing
zone to include both sites as ``magnet'' sites. The ASF allows for the
possible exemption of one magnet site from the ``sunset'' time limits
that generally apply to sites under the ASF, and the applicant proposes
that Site 1 be so exempted. No subzones/usage-driven sites are being
requested at this time. The application would have no impact on FTZ
19's previously authorized subzone.
In accordance with the FTZ Board's regulations, Christopher Kemp of
the FTZ Staff is designated examiner to evaluate and analyze the facts
and information presented in the application and case record and to
report findings and recommendations to the FTZ Board.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is August 7, 2017.
Rebuttal comments in response to material submitted during the
foregoing period may be submitted during the subsequent 15-day period
to August 21, 2017.
A copy of the application will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Christopher Kemp at
Christopher.Kemp@trade.gov or (202) 482-0862.
Dated: June 2, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017-11834 Filed 6-6-17; 8:45 am]
BILLING CODE 3510-DS-P