Glo Eyes, LLC; Filing of Color Additive Petition, 24912-24913 [2017-11165]
Download as PDF
24912
Federal Register / Vol. 82, No. 103 / Wednesday, May 31, 2017 / Proposed Rules
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We determined that this proposed AD
would not have federalism implications
under Executive Order 13132. This
proposed AD would not have a
substantial direct effect on the States, on
the relationship between the national
Government and the States, or on the
distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify this proposed regulation:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under the
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in
Alaska; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
The Proposed Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA proposes to amend 14 CFR part
39 as follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive (AD):
■
nlaroche on DSK30NT082PROD with PROPOSALS
Dassault Aviation: Docket No. FAA–2017–
0502; Directorate Identifier 2016–NM–
120–AD.
(a) Comments Due Date
We must receive comments by July 17,
2017.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Dassault Aviation
Model FALCON 7X airplanes, certificated in
any category, manufacturer serial numbers 15
through 89 inclusive, 92 through 94
VerDate Sep<11>2014
14:38 May 30, 2017
Jkt 241001
inclusive, 97 through 101 inclusive, 105, and
106.
(d) Subject
Air Transport Association (ATA) of
America Code 51, Structures.
(e) Reason
This AD was prompted by a discovery of
noncompliant rivets in the flight deck upper
skin. We are issuing this AD to prevent
interference between the rivet shank and the
flight deck mounted overhead panel when
the flight deck upper skin deforms due to
impact (e.g., bird strike); a condition, that if
not corrected, could affect the functioning of
essential flight control systems, and result in
reduced control of the airplane.
(f) Compliance
Comply with this AD within the
compliance times specified, unless already
done.
(g) Modification
Before exceeding 99 months or 4,100 flight
cycles, whichever occurs first since the date
of issuance of the original airworthiness
certificate or the date of issuance of the
original export certificate of airworthiness,
modify the airplane by replacing certain
MGPL type rivets installed on the flight deck
skin panel with solid type-rivets, in
accordance with the Accomplishment
Instructions of Dassault Aviation Service
Bulletin 7X–176, dated February 3, 2016.
(h) Other FAA AD Provisions
The following provisions also apply to this
AD:
(1) Alternative Methods of Compliance
(AMOCs): The Manager, International
Branch, ANM–116, Transport Airplane
Directorate, FAA, has the authority to
approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19.
In accordance with 14 CFR 39.19, send your
request to your principal inspector or local
Flight Standards District Office, as
appropriate. If sending information directly
to the International Branch, send it to the
attention of the person identified in
paragraph (i)(2) of this AD. Information may
be emailed to: 9-ANM-116-AMOCREQUESTS@faa.gov. Before using any
approved AMOC, notify your appropriate
principal inspector, or lacking a principal
inspector, the manager of the local flight
standards district office/certificate holding
district office.
(2) Contacting the Manufacturer: For any
requirement in this AD to obtain corrective
actions from a manufacturer, the action must
be accomplished using a method approved
by the Manager, International Branch, ANM–
116, Transport Airplane Directorate, FAA; or
EASA; or Dassault Aviation’s EASA Design
Organization Approval (DOA). If approved by
the DOA, the approval must include the
DOA-authorized signature.
(i) Related Information
(1) Refer to Mandatory Continuing
Airworthiness Information (MCAI) EASA AD
2016–0124, dated June 22, 2016, for related
information. This MCAI may be found on the
Internet at https://www.regulations.gov by
PO 00000
Frm 00031
Fmt 4702
Sfmt 4702
searching for and locating Docket No. FAA–
2017–0502.
(2) For more information about this AD,
contact Tom Rodriguez, Aerospace Engineer,
International Branch, ANM–116, Transport
Airplane Directorate, FAA, 1601 Lind
Avenue SW., Renton, WA 98057–3356;
telephone 425–227–1137; fax 425–227–1149.
(3) For service information identified in
this AD, contact Dassault Falcon Jet
Corporation, Teterboro Airport, P.O. Box
2000, South Hackensack, NJ 07606;
telephone: 201–440–6700; Internet: https://
www.dassaultfalcon.com. You may view this
service information at the FAA, Transport
Airplane Directorate, 1601 Lind Avenue SW.,
Renton, WA. For information on the
availability of this material at the FAA, call
425–227–1221.
Issued in Renton, Washington, on May 18,
2017.
Michael Kaszycki,
Acting Manager, Transport Airplane
Directorate, Aircraft Certification Service.
[FR Doc. 2017–10977 Filed 5–30–17; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
21 CFR Part 74
[Docket No. FDA–2017–C–2902]
Glo Eyes, LLC; Filing of Color Additive
Petition
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice of petition.
The Food and Drug
Administration (FDA or we) is
announcing that we have filed a
petition, submitted by Glo Eyes, LLC,
proposing that the color additive
regulations be amended to provide for
the safe use of D&C Yellow No. 8 as a
color additive in contact lens solution.
DATES: The color additive petition was
filed on April 18, 2017.
FOR FURTHER INFORMATION CONTACT:
Molly A. Harry, Center for Food Safety
and Applied Nutrition, Food and Drug
Administration, 5001 Campus Dr.,
College Park, MD 20740, 240–402–1075.
SUPPLEMENTARY INFORMATION: Under
section 721(d)(1) of the Federal Food,
Drug, and Cosmetic Act (21 U.S.C.
379e(d)(1)), we are giving notice that we
have filed a color additive petition (CAP
7C0311), submitted by Glo Eyes, LLC,
5501 Highway 199, suite 202, Fort
Worth, TX 76114. The petition proposes
to amend the color additive regulations
in 21 CFR part 74, Listing of Color
Additives Subject To Certification, to
provide for the safe use of D&C Yellow
SUMMARY:
E:\FR\FM\31MYP1.SGM
31MYP1
Federal Register / Vol. 82, No. 103 / Wednesday, May 31, 2017 / Proposed Rules
No. 8 (principally the disodium salt of
fluorescein) as a color additive in
contact lens solution.
We have determined under 21 CFR
25.32(l) that this action is of a type that
does not individually or cumulatively
have a significant effect on the human
environment. Therefore, neither an
environmental assessment nor an
environmental impact statement is
required.
Dated: May 24, 2017.
Anna K. Abram,
Deputy Commissioner for Policy, Planning,
Legislation, and Analysis.
[FR Doc. 2017–11165 Filed 5–30–17; 8:45 am]
BILLING CODE 4164–01–P
POSTAL SERVICE
versus goods, for purposes of adopting
a universal, world-wide standard.
In order for the Postal Service to meet
this new standard, the contents of FirstClass Mail International postcard, letter,
and large envelope (flat) mail;
International Priority Airmail (IPA)
postcard, letter, and large envelope (flat)
mail; and International Surface Air Lift
(ISAL) postcard, letter, and large
envelope (flat) mail will be limited to
documents.
Effective January 1, 2018, mailers who
wish to mail any type of goods,
regardless of shape, must use First Class
Package International Service or another
available service. Technical details and
proposed IMM changes will be
published at a later date and before
implementation.
Stanley F. Mires,
Attorney, Federal Compliance.
39 CFR Part 20
International Mailing Services: Mailing
Services Rules Changes
Postal ServiceTM.
Advance notice of proposed
rulemaking; request for comments.
[FR Doc. 2017–11120 Filed 5–30–17; 8:45 am]
BILLING CODE 7710–12–P
AGENCY:
ACTION:
ENVIRONMENTAL PROTECTION
AGENCY
The Postal Service is
considering limiting First-Class Mail
International® service to documents
only.
DATES: Comments on this advance
notice are due July 17, 2017.
ADDRESSES: Mail or deliver written
comments to the manager, Product
Classification, U.S. Postal Service, 475
L’Enfant Plaza SW., Room 4446,
Washington, DC 20260–5015. You may
inspect and photocopy all written
comments at USPS® Headquarters
Library, 475 L’Enfant Plaza SW., 11th
Floor North, Washington, DC, by
appointment only between the hours of
9 a.m. and 4 p.m., Monday through
Friday. Call 1–202–268–2906 in
advance for an appointment. Email
comments, containing the name and
address of the commenter, may be sent
to: ProductClassification@usps.gov,
with a subject line of ‘‘First-Class Mail
International.’’ Faxed comments are not
accepted.
FOR FURTHER INFORMATION CONTACT:
Mico Milanovic at (202) 268–5348 or
Sylvia Baylis at (202) 268–6464.
SUPPLEMENTARY INFORMATION: This is an
advance notice of the Postal Service’s
intent to modify some of its
International Mailing rules to conform
with the new Universal Postal Union
(UPU) requirements for certain Letter
Post mail, effective January 1, 2018.
After lengthy deliberations, UPU
member countries voted to identify and
separate items by content as documents
40 CFR Part 52
nlaroche on DSK30NT082PROD with PROPOSALS
SUMMARY:
VerDate Sep<11>2014
14:38 May 30, 2017
Jkt 241001
[EPA–R03–OAR–2017–0064; FRL–9962–76–
Region 3]
Approval and Promulgation of Air
Quality Implementation Plans;
Pennsylvania; Revisions to Allegheny
County Health Department Rules
Environmental Protection
Agency (EPA).
ACTION: Proposed rule.
AGENCY:
The Environmental Protection
Agency (EPA) proposes to approve the
state implementation plan (SIP) revision
submitted by the Commonwealth of
Pennsylvania for the purpose of
updating the SIP to include
administrative and definition
amendments made to Allegheny County
Health Department’s (ACHD) Rules and
Regulations Article XXI, Air Pollution
Control. The amendments update the
name of the Bureau of Environmental
Quality to the Bureau of Environmental
Health and revise the definition of
‘‘County Executive’’ to agree with the
definition contained in the Allegheny
County Home Rule Charter. In the Final
Rules section of this Federal Register,
EPA is approving the Commonwealth’s
SIP submittal as a direct final rule
without prior proposal because the
Agency views this as a noncontroversial
submittal and anticipates no adverse
comments. A detailed rationale for the
approval is set forth in the direct final
rule. If no adverse comments are
SUMMARY:
PO 00000
Frm 00032
Fmt 4702
Sfmt 4702
24913
received in response to this action, no
further activity is contemplated. If EPA
receives adverse comments, the direct
final rule will be withdrawn and all
public comments received will be
addressed in a subsequent final rule
based on this proposed rule. EPA will
not institute a second comment period.
Any parties interested in commenting
on this action should do so at this time.
Comments must be received in
writing by June 30, 2017.
DATES:
Submit your comments,
identified by Docket ID No. EPA–R03–
OAR–2017–0064 at https://
www.regulations.gov, or via email to
rehn.brian@epa.gov. For comments
submitted at Regulations.gov, follow the
online instructions for submitting
comments. Once submitted, comments
cannot be edited or removed from
Regulations.gov. For either manner of
submission, the EPA may publish any
comment received to its public docket.
Do not submit electronically any
information you consider to be
confidential business information (CBI)
or other information whose disclosure is
restricted by statute. Multimedia
submissions (audio, video, etc.) must be
accompanied by a written comment.
The written comment is considered the
official comment and should include
discussion of all points you wish to
make. EPA will generally not consider
comments or comment contents located
outside of the primary submission (i.e.
on the web, cloud, or other file sharing
system). For additional submission
methods, please contact the person
identified in the FOR FURTHER
INFORMATION CONTACT section. For the
full EPA public comment policy,
information about CBI or multimedia
submissions, and general guidance on
making effective comments, please visit
https://www2.epa.gov/dockets/
commenting-epa-dockets.
ADDRESSES:
Sara
Calcinore, (215) 814–2043, or by email
at calcinore.sara@epa.gov.
FOR FURTHER INFORMATION CONTACT:
For
further information, please see the
information provided in the direct final
action, with the same title, Revisions to
Allegheny County Health Department
Rules, that is located in the ‘‘Rules and
Regulations’’ section of this Federal
Register publication. Please note that if
EPA receives adverse comment on an
amendment, paragraph, or section of
this rule and if that provision may be
severed from the remainder of the rule,
EPA may adopt as final those provisions
of the rule that are not the subject of an
adverse comment.
SUPPLEMENTARY INFORMATION:
E:\FR\FM\31MYP1.SGM
31MYP1
Agencies
[Federal Register Volume 82, Number 103 (Wednesday, May 31, 2017)]
[Proposed Rules]
[Pages 24912-24913]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-11165]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
21 CFR Part 74
[Docket No. FDA-2017-C-2902]
Glo Eyes, LLC; Filing of Color Additive Petition
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice of petition.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA or we) is announcing
that we have filed a petition, submitted by Glo Eyes, LLC, proposing
that the color additive regulations be amended to provide for the safe
use of D&C Yellow No. 8 as a color additive in contact lens solution.
DATES: The color additive petition was filed on April 18, 2017.
FOR FURTHER INFORMATION CONTACT: Molly A. Harry, Center for Food Safety
and Applied Nutrition, Food and Drug Administration, 5001 Campus Dr.,
College Park, MD 20740, 240-402-1075.
SUPPLEMENTARY INFORMATION: Under section 721(d)(1) of the Federal Food,
Drug, and Cosmetic Act (21 U.S.C. 379e(d)(1)), we are giving notice
that we have filed a color additive petition (CAP 7C0311), submitted by
Glo Eyes, LLC, 5501 Highway 199, suite 202, Fort Worth, TX 76114. The
petition proposes to amend the color additive regulations in 21 CFR
part 74, Listing of Color Additives Subject To Certification, to
provide for the safe use of D&C Yellow
[[Page 24913]]
No. 8 (principally the disodium salt of fluorescein) as a color
additive in contact lens solution.
We have determined under 21 CFR 25.32(l) that this action is of a
type that does not individually or cumulatively have a significant
effect on the human environment. Therefore, neither an environmental
assessment nor an environmental impact statement is required.
Dated: May 24, 2017.
Anna K. Abram,
Deputy Commissioner for Policy, Planning, Legislation, and Analysis.
[FR Doc. 2017-11165 Filed 5-30-17; 8:45 am]
BILLING CODE 4164-01-P