Foreign-Trade Zone 145-Shreveport, Louisiana; Application for Subzone; Glovis America, Inc.; Shreveport, Louisiana, 18282 [2017-07809]
Download as PDF
18282
Federal Register / Vol. 82, No. 73 / Tuesday, April 18, 2017 / Notices
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE
[3/24/2017 through 4/2/2017 (Amended)]
Firm name
Firm address
Auburn Manufacturing, Inc ......
P.O. Box 220, Mechanic Falls,
ME 04256.
77 North Reamstown Road,
Reamstown, PA 17567.
1 Cable Car Drive, Washington, MO 63090.
2484 West Clay Street, Saint
Charles, MO 63301.
Boose Aluminum Foundry
Company, Inc.
Clemco Industries Corporation
Masterclock, Inc. .....................
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
71030, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
Miriam Kearse,
Lead Program Analyst.
[FR Doc. 2017–07760 Filed 4–17–17; 8:45 am]
BILLING CODE 3510–WH–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–24–2017]
Foreign-Trade Zone 145—Shreveport,
Louisiana; Application for Subzone;
Glovis America, Inc.; Shreveport,
Louisiana
sradovich on DSK3GMQ082PROD with NOTICES
Date accepted
for
investigation
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Caddo-Bossier Parishes Port
Commission, grantee of FTZ 145,
requesting subzone status for the facility
of Glovis America, Inc., located in
Shreveport, Louisiana. The application
was submitted pursuant to the
provisions of the Foreign-Trade Zones
Act, as amended (19 U.S.C. 81a–81u),
and the regulations of the FTZ Board (15
CFR part 400). It was formally docketed
on April 12, 2017.
The proposed subzone (530 acres) is
located at 7600 General Motors
Boulevard in Shreveport. No
VerDate Sep<11>2014
16:55 Apr 17, 2017
Jkt 241001
3/27/2017
3/27/2017
3/28/2017
3/28/2017
Product(s)
The firm manufactures high performance coated textiles and
composite fabrics for extreme temperature applications.
The firm manufactures high-quality aluminum sand castings
for an array of industries.
The firm manufactures air powered blast equipment for outdoor use.
The firm manufactures precise timing equipment.
authorization for production activity has
been requested at this time.
In accordance with the FTZ Board’s
regulations, Camille Evans of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
30, 2017. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
June 12, 2017.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Camille Evans at Camille.Evans@
trade.gov or (202) 482–2350.
Dated: April 12, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017–07809 Filed 4–17–17; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[C–533–858]
Certain Oil Country Tubular Goods
From India: Final Results of
Countervailing Duty Administrative
Review; 2013–2014
countervailing duty order on certain oil
country tubular goods from India
pursuant to a request for review by
Jindal SAW Ltd. (Jindal SAW). The
period of review (POR) is December 23,
2013, through December 31, 2014. On
October 14, 2016, the Department
published the preliminary results of the
administrative review. Based on an
analysis of the comments received after
the preliminary results, the Department
has made changes to the subsidy rate
determined for Jindal SAW. The final
subsidy rate is listed in the ‘‘Final
Results of Administrative Review’’
section below.
DATES: Effective April 18, 2017.
FOR FURTHER INFORMATION CONTACT: Elfi
Blum, AD/CVD Operations, Office VII,
Enforcement and Compliance, U.S.
Department of Commerce, 1401
Constitution Avenue NW., Washington,
DC 20230; telephone: (202) 482–0197.
SUPPLEMENTARY INFORMATION:
Scope of the Order
The merchandise covered by the order
is certain oil country tubular goods
(OCTG), which are hollow steel
products of circular cross-section,
including oil well casing and tubing, of
iron (other than cast iron) or steel (both
carbon and alloy), whether seamless or
welded, regardless of end finish (e.g.,
whether or not plain end, threaded, or
threaded and coupled) whether or not
conforming to American Petroleum
Institute (API) or non-API
specifications, whether finished
(including limited service OCTG
products) or unfinished (including
green tubes and limited service OCTG
products), whether or not thread
protectors are attached. The scope of the
order also covers OCTG coupling stock.
For a complete description of the scope
of the order, see Appendix II to this
notice.
Enforcement and Compliance,
International Trade Administration,
Analysis of Comments Received
Department of Commerce.
The issues raised by Jindal SAW and
SUMMARY: The Department is conducting
the Government of India (GOI) in their
this administrative review of the
AGENCY:
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
E:\FR\FM\18APN1.SGM
18APN1
Agencies
[Federal Register Volume 82, Number 73 (Tuesday, April 18, 2017)]
[Notices]
[Page 18282]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-07809]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-24-2017]
Foreign-Trade Zone 145--Shreveport, Louisiana; Application for
Subzone; Glovis America, Inc.; Shreveport, Louisiana
An application has been submitted to the Foreign-Trade Zones (FTZ)
Board by the Caddo-Bossier Parishes Port Commission, grantee of FTZ
145, requesting subzone status for the facility of Glovis America,
Inc., located in Shreveport, Louisiana. The application was submitted
pursuant to the provisions of the Foreign-Trade Zones Act, as amended
(19 U.S.C. 81a-81u), and the regulations of the FTZ Board (15 CFR part
400). It was formally docketed on April 12, 2017.
The proposed subzone (530 acres) is located at 7600 General Motors
Boulevard in Shreveport. No authorization for production activity has
been requested at this time.
In accordance with the FTZ Board's regulations, Camille Evans of
the FTZ Staff is designated examiner to review the application and make
recommendations to the FTZ Board.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is May 30, 2017.
Rebuttal comments in response to material submitted during the
foregoing period may be submitted during the subsequent 15-day period
to June 12, 2017.
A copy of the application will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Camille Evans at
Camille.Evans@trade.gov or (202) 482-2350.
Dated: April 12, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017-07809 Filed 4-17-17; 8:45 am]
BILLING CODE 3510-DS-P