Certain New Chemicals; Receipt and Status Information for December 2016, 13339-13345 [2017-04772]
Download as PDF
<![CDATA[
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
in 40 CFR part 3, subpart D. In
accordance with 40 CFR 3.1000(d), this
notice of EPA’s decision to approve
North Carolina’s request to revise/
modify its following EPA-authorized
programs to allow electronic reporting
under 40 CFR parts 50 through 52, 61,
63, 65, and 70 is being published in the
Federal Register.
LUESA was notified of EPA’s
determination to approve its application
with respect to the authorized programs
listed above.
Matthew Leopard,
Director, Office of Information Management.
[FR Doc. 2017–04717 Filed 3–9–17; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2016–0697; FRL–9958–32]
Certain New Chemicals; Receipt and
Status Information for December 2016
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from
December 1, 2016 to December 30, 2016.
DATES: Comments identified by the
specific case number provided in this
document, must be received on or
before April 10, 2017.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2016–0697,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
sradovich on DSK3GMQ082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
PO 00000
Frm 00035
Fmt 4703
Sfmt 4703
13339
from December 1, 2016 to December 30,
2016, and consists of the PMNs and
TMEs both pending and/or expired, and
the NOCs to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory,
please go to: https://www.epa.gov/
opptintr/newchems/pubs/
inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 65 PMNs received by EPA
during this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
PMN; The date the PMN was received
by EPA; the projected end date for
EPA’s review of the PMN; the
submitting manufacturer/importer; the
E:\FR\FM\10MRN1.SGM
10MRN1
13340
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
potential uses identified by the
manufacturer/importer in the PMN; and
the chemical identity.
TABLE 1—PMNS RECEIVED FROM DECEMBER 2, 2016 TO DECEMBER 30, 2016
Case No.
Received date
Projected
notice end
date
Manufacturer
importer
Use
(S) Intermediate.
(S) Intermediate
for further
polymer reaction.
(G) Wetting and
dispersing additive.
(G) Component
of an
electrocoat
resin.
12/5/2016
12/19/2016
3/5/2017
3/19/2017
CBI ....................
CBI ....................
P–16–0372 ..........
12/21/2016
3/21/2017
CBI ....................
P–16–0380 ..........
12/1/2016
3/1/2017
CBI ....................
P–16–0380 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
in electrocoat
resin.
P–16–0380 ..........
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
P–16–0381 ..........
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
P–16–0381 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of electrocoat
resin.
P–16–0381 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of an
electrocoat
resin.
P–16–0382 ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0193 ..........
P–16–0358 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of an
electrocoat
resin.
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
PO 00000
Frm 00036
Fmt 4703
Sfmt 4703
Chemical
(G) Branched alkenes.
(G) Alkyl phenol.
(G) Polyester phosphate alkyl alkyl esters.
(G) Formic acid, compounds (compds.) with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Propanoic acid, 2-hydroxy-, compds. with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates
(salts).
(G) Propanoic acid, 2-hydroxy-, compds. with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates
(salts).
(G) Propanoic acid, 2-hydroxy-, compds. with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
E:\FR\FM\10MRN1.SGM
10MRN1
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
13341
TABLE 1—PMNS RECEIVED FROM DECEMBER 2, 2016 TO DECEMBER 30, 2016—Continued
Case No.
Received date
Projected
notice end
date
Manufacturer
importer
Use
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
P–16–0383 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
in electrocoat
resin.
P–16–0383 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of an
electrocoat
resin.
P–16–0383 ..........
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
P–16–0384 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of electrocoat
resin.
P–16–0384 ..........
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
P–16–0385 ..........
12/1/2016
3/1/2017
CBI ....................
(G) Component
of electrocoat
resin.
P–16–0385 ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0382 ..........
12/1/2016
3/1/2017
CBI ....................
(S) Anti-Crater
additive for
automotive
electrocoat
resin.
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
PO 00000
Frm 00037
Fmt 4703
Sfmt 4703
Chemical
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products acetates
(salts).
(G) Propanoic acid, 2-hydroxy-, compds. with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates
(salts).
(G) Propanoic acid, 2-hydroxy-, compds. with
hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates
(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
E:\FR\FM\10MRN1.SGM
10MRN1
13342
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
TABLE 1—PMNS RECEIVED FROM DECEMBER 2, 2016 TO DECEMBER 30, 2016—Continued
Case No.
Received date
Projected
notice end
date
Manufacturer
importer
Use
12/1/2016
3/1/2017
CBI ....................
(G) Component
in electrocoat
resin.
P–16–0388 ..........
12/22/2016
3/22/2017
CBI ....................
P–16–0399 ..........
12/22/2016
3/22/2017
Tryeco LLC .......
P–16–0399 ..........
12/22/2016
3/22/2017
Tryeco LLC .......
P–16–0399 ..........
12/22/2016
3/22/2017
Tryeco LLC .......
P–16–0446 ..........
12/5/2016
3/5/2017
P–16–0486 ..........
12/15/2016
3/15/2017
CBI ....................
P–16–0505 ..........
12/5/2016
3/5/2017
CBI ....................
P–16–0505 ..........
12/5/2016
3/5/2017
CBI ....................
P–16–0513 ..........
12/28/2016
3/28/2017
CBI ....................
P–16–0530 ..........
12/6/2016
3/6/2017
CBI ....................
(G) Hardener for
epoxy coating.
(S) Agricultural
soil amendment for turf
applications
and direct soil
injection with
fertilizers.
(S) Compound
to be used in
preparation of
advanced
seed coatings.
(S) Agricultural
soil amendment for filed
crops as
‘‘agrisorb plus’’
granular soil
amendment.
(S) Resin in architectural
primer coatings.
(G) Isolated intermediate in
the production
of a refrigerant
precursor.
(S) Polymeric
resin for ultraviolet (uv) curable acrylates.
(S) Polymeric
resin for uv
curable
acrylates.
(S) Intermediate
for further reaction.
(S) Concrete
and stone
coating.
P–16–0543 ..........
12/19/2016
3/19/2017
CBI ....................
P–16–0547 ..........
P–16–0589 ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0385 ..........
12/21/2016
12/19/2016
3/21/2017
3/19/2017
CBI ....................
CBI ....................
P–16–0591 ..........
12/9/2016
3/9/2017
P–16–0591 ..........
12/9/2016
3/9/2017
Chromatic Technologies, Inc.
Chromatic Technologies, Inc.
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
PO 00000
Allnex USA Inc.
Frm 00038
Fmt 4703
(G) Battery ingredient.
(G) Catalyst .......
(G) Synthetic aircraft engine
lubricant for
Contained use
industrial lubricant.
(G) Component
of printing ink.
(G) Component
of colorants.
Sfmt 4703
Chemical
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
(G) Aliphatic polyamines, polymers with bisphenol
A and epichlorohydrin.
(S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized.
(S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized.
(S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized.
(G) Fatty acids, reaction products with alkylamine,
polymers with substituted carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate, lactates (salts).
(G) Polychloropropane.
(S) Poly[oxy(methyl- 1, 2- ethanediyl) ] , alpha- (1oxo- 2- propen- 1- yl)—omega- [(1- oxo- 2propen- 1- yl) oxy] -.
(S) Poly[oxy(methyl- 1, 2- ethanediyl) ] , a- (1- oxo2- propen- 1- yl)—¿- [(1- oxo- 2- propen- 1- yl)
oxy] -.
(G) Alkylphenol.
(S) 2-propenoic acid, 2-methyl, 2-(dimethylamino)
ethyl ester, polymer with ethyl 2-prpenoate, 2hydroxyethyl m2-propenoate and methyl 2-methyl 2-propenoate, acetate salt.
(G) Halogenophosphoric acid metal salt.
(G) Neodymium aluminium alkyl polymer complex.
(G) Pentaerythritol ester of mixed linear and
branched carboxylic acids.
(G) Alkyl bis-phenol.
(G) Alkyl bis-phenol.
E:\FR\FM\10MRN1.SGM
10MRN1
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
13343
TABLE 1—PMNS RECEIVED FROM DECEMBER 2, 2016 TO DECEMBER 30, 2016—Continued
Case No.
Received date
Projected
notice end
date
Manufacturer
importer
Use
(G) Open dispersive use component in liquid paint coating.
(S) Coreactant
used in an adhesive.
(S) Polyurethane
used in an adhesive.
(S) Chemical
tracer pumped
into an oil or
gas well to
monitor well
performance.
(S) Chemical
tracer pumped
into an oil or
gas well to
monitor well
performance.
(G) Coatings
polymer.
12/21/2016
3/21/2017
CBI ....................
P–17–0107 ..........
12/13/2016
3/13/2017
CBI ....................
P–17–0121 ..........
12/6/2016
3/6/2017
CBI ....................
P–17–0127 ..........
12/6/2016
3/6/2017
Spectrum Tracer
Services.
P–17–0139 ..........
12/6/2016
3/6/2017
Spectrum Tracer
Services.
P–17–0146 ..........
12/2/2016
3/2/2017
CBI ....................
P–17–0146 ..........
12/2/2016
3/2/2017
CBI ....................
(G) Ink binder
polymer.
P–17–0157. .........
12/20/2016
3/20/2017
CBI ....................
P–17–0163 ..........
12/8/2016
3/8/2017
CBI ....................
P–17–0164 ..........
12/7/2016
3/7/2017
CBI ....................
P–17–0165 ..........
12/5/2016
3/5/2017
CBI ....................
P–17–0166 ..........
12/12/2016
3/12/2017
CBI ....................
P–17–0167 ..........
12/12/2016
3/12/2017
CBI ....................
P–17–0170 ..........
12/8/2016
3/8/2017
Allnex Usa Inc. ..
P–17–0171 ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–17–0013 ..........
12/19/2016
3/19/2017
P–17–0172 ..........
12/8/2016
3/8/2017
CBI ....................
P–17–0173 ..........
12/14/2016
3/14/2017
CBI ....................
P–17–0174 ..........
12/12/2016
3/12/2017
CBI ....................
(G) Binder used
in coating
manufacture.
(G) Chemical
precursor.
(G) Intermediate
chemical.
(G) Electronic
device use.
(G) Additive in
adhesive dispersions.
(G) Additive in
adhesive dispersions.
(S) Uv curable
coating resin
for 3d printing
applications.
(S) Solvent dye
for use as ink
in hot foil
stamping.
(G) Lubricating
oil additive.
(G) Chemical/
polymer modification.
(G) Plastics additive.
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
PO 00000
Classic
Dyestuffs.
Frm 00039
Fmt 4703
Sfmt 4703
Chemical
(G) Formaldehyde, polymer with arylylpolyamine,
2-(chloromethyl)oxirane and phenol.
(G) Hydroxyl terminated polyurethane of methylene diphenyldiisocyanate based on polyester
and polyether-polyol.
(G) Methylene diphenyl diisocyanate terminated
polyurethane resin.
(G) Halogenated benzoic acid ethyl ester.
(G) Halogenated benzoic acid ethyl ester.
(G) Aromaticpolycarboxylic acid, polymer with
[(aminoalkyl)amino]alkanol,(chloroalkyl)oxirane
homopolymer etherwith
polyalkyleneoxide,alkanedioic acid, alkyldiol,
heterocyclicketone, alicyclic polyisocyanate,
polyalkyleneoxide monoalkylether and
polyalkoxyalkylajmine, reaction products with Nalkylalyklamine, alkylcarboxylate (salts).
(G) Aromaticpolycarboxylic acid, polymer with
[(aminoalkyl)amino]alkanol,(chloroalkyl)oxirane
homopolymer etherwith
polyalkyleneoxide,alkanedioic acid, alkyldiol,
heterocyclicketone, alicyclic polyisocyanate,
polyalkyleneoxide monoalkylether and
polyalkoxyalkylajmine, reaction products with Nalkylalyklamine, alkylcarboxylate (salts).
(G) Silane amine carbonate.
(G) Substituted benzofuropyridine.
(G) Substituted benzofuropyridine.
(G) Fluorocyanophenyl alkylbenzoate.
(G) Rosin polymer, glycol ester.
(G) Rosin polymer, glycol ester.
(G) Alkanediol, 2,2-bis (substituted alkyl)-, polymer
with substituted alkane, heteromonocycles,
alkenoate.
(S) 1,3-benzenedisulfonic acid, 4-[2-(5-cyano-1ethyl-1,6-dihydro-2-hydroxy-4-methyl-6-oxo-3pyridinyl)diazenyl]-, sodium salt (1:2).
(G) Sulfurized alkylphenol, calcium salts.
(G) Polydimethysiloxane eugenol group-terminated.
(G) Alkyltriethoxysilylpolysiloxane.
E:\FR\FM\10MRN1.SGM
10MRN1
13344
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
TABLE 1—PMNS RECEIVED FROM DECEMBER 2, 2016 TO DECEMBER 30, 2016—Continued
Case No.
Received date
Projected
notice end
date
Manufacturer
importer
Use
(G) Battery ingredient.
(G) Microlithography for electronic device
Manufacturing.
(G) Microlithography for electronic device
manufacturing.
(S) Modified
carboxypolyamine salt used
as a dispersing additive for pigments in industrial paints
and coatings.
(S) Modified
acids polymer
with polyols
and anhydride
used as a dispersing additive for pigments in industrial paints
and coatings.
(G) Polymeric
dispersant.
12/12/2016
3/12/2017
CBI ....................
P–17–0177 ..........
12/13/2016
3/13/2017
Shin-Etsu
Microsi.
P–17–0178 ..........
12/13/2016
3/13/2017
Shin-Etsu
Microsi.
P–17–0179 ..........
12/21/2016
3/21/2017
CBI ....................
P–17–0180 ..........
12/20/2016
3/20/2017
CBI ....................
P–17–0181 ..........
12/16/2016
3/16/2017
CBI ....................
P–17–0184 ..........
12/20/2016
3/20/2017
P–17–0184 ..........
12/20/2016
3/20/2017
Colonial Chemical, Inc.
Colonial Chemical, Inc.
P–17–0184 ..........
12/20/2016
3/20/2017
Colonial Chemical, Inc.
P–17–0184 ..........
12/20/2016
3/20/2017
P–17–0185 ..........
12/20/2016
3/20/2017
Colonial Chemical, Inc.
CBI ....................
P–17–0186 ..........
12/20/2016
3/20/2017
CBI ....................
(G) Additive,
open, non-dispersive use.
P–17–0190 ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–17–0176 ..........
12/26/2016
3/26/2017
CBI ....................
(G) A polymer in
paints and architectural
coatings.
For the 10 NOCs received by EPA
during this period, Table 2 provides the
following information (to the extent that
such information is not claimed as CBI):
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
(S) Transportation washes.
(S) Industrial allpurpose cleaners.
(S) Personal
care products,
shampoos, facial washes.
(S) Firefighting
foams.
(G) Additive,
open, non-dispersive use.
Chemical
(G) Carbonic acid, alkyl carbomonocyclic ester.
(G) Monoheteropentacycloalkane-4-carboxylic
acid, substituted-cycloalkyl ester.
(G) Sulfonium, triphenyl-, salt with substituted-alkyl
4-substituted-benzoate.
(G) Modified carboxypolyamine salt.
(G) Modified acids polymer with polyols and anhydride.
(G) 2-propanol, aklylamino, polymer with 2,4diisocyanato-1-methylbenzene and 2,2′iminobis[ethanol], 2-oxepanone homopolymer
lauryl ester- and polypropylene glycol 2aminomethylethyl branched nonylphenyl etherblocked.
(S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt.
(S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt.
(S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt.
(S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt.
(G) Fatty acids, C18-unsaturated (unsatd.), dimers,
hydrogenated, polymers with C18-unsatd. fatty
acid trimers, alkylenediamine and
hydroxyalkanoic acid.
(G) 2,5-furandione, telomer with 1,1′-(1,1-dimethyl3-methylene-1,3-propanediyl)bis[benzene] and
ethenylbenzene, carbonmonocycle alkyl ester,
esters with polyalkylene glycol mono alkyl
ethers, ammonium salts, 2,2′-(1,2diazenediyl)bis[2-methylbutanenitrile]-initiated.
(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2propen-1-yl)oxy]ethyl ester, polymer with
cycloalkyl 2-methyl-2-propenoate,
ethenylbenzene, 2-ethylhexyl 2- propenoate,
methyl 2-methyl-2-propenoate and 2methylpropyl 2-methyl-2- propenoate.
The EPA case number assigned to the
NOC; the date the NOC was received by
EPA; the projected date of
commencement provided by the
PO 00000
Frm 00040
Fmt 4703
Sfmt 4703
submitter in the NOC; and the chemical
identity.
E:\FR\FM\10MRN1.SGM
10MRN1
Federal Register / Vol. 82, No. 46 / Friday, March 10, 2017 / Notices
13345
TABLE 2—NOCS RECEIVED FROM DECEMBER 1, 2016 TO DECEMBER 30, 2016
Case No.
Received date
Commencement date
J–15–0033 .......................................
J–16–0033 .......................................
12/22/2016
12/19/2016
12/21/2016
12/4/2016
P–07–0177 .......................................
12/15/2016
9/11/2007
P–07–0395
P–14–0713
P–14–0714
P–14–0715
P–16–0074
P–16–0248
.......................................
.......................................
.......................................
.......................................
.......................................
.......................................
12/5/2016
12/7/2016
12/7/2016
12/7/2016
12/20/2016
12/5/2016
7/29/2007
11/20/2016
11/20/2016
11/20/2016
12/1/2016
11/18/2016
P–16–0492 .......................................
12/21/2016
12/10/2016
Authority: 15 U.S.C. 2601 et seq.
Dated: January 30, 2017.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2017–04772 Filed 3–9–17; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[FRL–9958–91–Region 3]
Delegation of Authority to the State of
West Virginia To Implement and
Enforce Additional or Revised National
Emission Standards for Hazardous Air
Pollutants and New Source
Performance Standards
Environmental Protection
Agency (EPA).
ACTION: Notice of delegation of
authority.
AGENCY:
On October 5, 2016, the
Environmental Protection Agency (EPA)
sent the State of West Virginia (West
Virginia) a letter acknowledging that
West Virginia’s delegation of authority
to implement and enforce National
Emissions Standards for Hazardous Air
Pollutants (NESHAP) and New Source
Performance Standards (NSPS) had been
updated, as provided for under
previously approved delegation
mechanisms. To inform regulated
facilities and the public of West
Virginia’s updated delegation of
authority to implement and enforce
NESHAP and NSPS, EPA is making
available a copy of EPA’s letter to West
Virginia through this notice.
DATES: On October 5, 2016, EPA sent
West Virginia a letter acknowledging
that West Virginia’s delegation of
sradovich on DSK3GMQ082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:37 Mar 09, 2017
Jkt 241001
Chemical
(G) Modified trichoderma reesei strain.
(G) Saccharomyces cerevisiae, modified to express glucoamylase activity.
(S) Isocyanic acid, polymethylenepolyphenylene ester, polymer with
methoxylated
dehydrochlorinated
brominated
2-butyne-1,4diolepichlorohydrin polymer.
(G) Dialkyl formamide.
(S) Plastics, wastes, pyrolyzed, C5–12 oil.
(S) Plastics, wastes, pyrolyzed, C9–20 pyrolysis oil.
(S) Waste plastics, pyrolyzed, C20–55 fraction.
(G) Isocyanate terminated polyurethane.
´ ´
(G) Poly(oxy-1,2-ethanediyl), e¿,e¿′-[(1,methylethylidene)di-4,1-phen¨
ylene]bis[ı¿-hydroxy-, polymer with aliphatic diisocyanate, propylene
glycol monomethacrylate-blocked.
(G) Polyester-amide polymer of ‘isophthalic acid’ with diamino-alkane,
cyclohexane-dialcohol, alkanetriol, di-isocyanate and acrylic acidethylene copolymer.
authority to implement and enforce
NESHAP and NSPS had been updated.
ADDRESSES: Copies of documents
pertaining to this action are available for
public inspection during normal
business hours at the Air Protection
Division, U.S. Environmental Protection
Agency, Region III, 1650 Arch Street,
Philadelphia, Pennsylvania 19103–
2029. Copies of West Virginia’s
submittal are also available at the West
Virginia Department of Environmental
Protection, Division of Air Quality, 601
57th Street SE., Charleston, West
Virginia 25304.
FOR FURTHER INFORMATION CONTACT: Ray
Chalmers, (215) 814-2061, or by e-mail
at chalmers.ray@epa.gov.
SUPPLEMENTARY INFORMATION: On July
11, 2016, West Virginia notified EPA
that West Virginia had updated its
incorporation by reference of federal
NESHAP and NSPS to include many
such standards, as found in Title 40 of
the Code of Federal Regulations (CFR),
Parts 60, 61, and 63, as of June 1, 2015.
On October 5, 2016, EPA sent West
Virginia a letter acknowledging that
West Virginia now has the authority to
implement and enforce the NESHAP
and NSPS as specified by West Virginia
in its notice to EPA, as provided for
under previously-approved automatic
delegation mechanisms. All
notifications, applications, reports and
other correspondence required pursuant
to the delegated NESHAP and NSPS
must be submitted to both the US EPA
Region III and to the West Virginia
Department of Environmental
Protection, unless the delegated
standard specifically provides that such
submittals may be sent to EPA or a
delegated State. In such cases, the
submittals should be sent only to the
West Virginia Department of
PO 00000
Frm 00041
Fmt 4703
Sfmt 4703
Environmental Protection. A copy of
EPA’s October 5, 2015 letter to West
Virginia follows:
Mr. William F. Durham, Director
Division of Air Quality
West Virginia Department of
Environmental Protection
601 57th Street
Charleston, West Virginia 25304
Dear Mr. Durham:
The United States Environmental
Protection Agency (EPA) has previously
delegated to the State of West Virginia
the authority to implement and enforce
various federal National Emissions
Standards for Hazardous Air Pollutants
(NESHAP) and New Source
Performance Standards (NSPS), which
are found at 40 CFR parts 60, 61 and 63.
In those actions EPA also delegated to
West Virginia the authority to
implement and enforce any future EPA
NESHAP or NSPS on the condition that
West Virginia legally adopt the future
standards, make only allowed wording
changes, and provide specified notice to
EPA.
In a letter dated July 11, 2016, West
Virginia informed EPA that West
Virginia had updated its incorporation
by reference of federal NESHAP and
NSPS to include many such standards
as found in 40 CFR parts 60, 61, and 63
as of June 1, 2015. West Virginia noted
that it understood that it was
automatically delegated the authority to
implement these standards. West
Virginia committed to enforcing the
standards in conformance with the
terms of EPA’s previous delegations of
authority. West Virginia made only
allowed wording changes.
West Virginia provided copies of the
revised West Virginia Legislative Rules
which specify the NESHAP and NSPS
which West Virginia has adopted by
E:\FR\FM\10MRN1.SGM
10MRN1
]]>Agencies
[Federal Register Volume 82, Number 46 (Friday, March 10, 2017)]
[Notices]
[Pages 13339-13345]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-04772]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0697; FRL-9958-32]
Certain New Chemicals; Receipt and Status Information for
December 2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from December 1, 2016 to December 30, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before April 10, 2017.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0697, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from December 1, 2016 to December 30, 2016, and consists of the
PMNs and TMEs both pending and/or expired, and the NOCs to manufacture
a new chemical that the Agency has received under TSCA section 5 during
this time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory, please go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 65 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; The
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the
[[Page 13340]]
potential uses identified by the manufacturer/importer in the PMN; and
the chemical identity.
Table 1--PMNs Received From December 2, 2016 to December 30, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0193.......................... 12/5/2016 3/5/2017 CBI................... (S) Intermediate..... (G) Branched alkenes.
P-16-0358.......................... 12/19/2016 3/19/2017 CBI................... (S) Intermediate for (G) Alkyl phenol.
further polymer
reaction.
P-16-0372.......................... 12/21/2016 3/21/2017 CBI................... (G) Wetting and (G) Polyester phosphate alkyl alkyl
dispersing additive. esters.
P-16-0380.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of an (G) Formic acid, compounds (compds.)
electrocoat resin. with hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0380.......................... 12/1/2016 3/1/2017 CBI................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0380.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Formic acid, compds. with
additive for hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0381.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Propanoic acid, 2-hydroxy-,
additive for compds. with hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products formates (salts).
P-16-0381.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of (G) Propanoic acid, 2-hydroxy-,
electrocoat resin. compds. with hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products formates (salts).
P-16-0381.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of an (G) Propanoic acid, 2-hydroxy-,
electrocoat resin. compds. with hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products formates (salts).
P-16-0382.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of an (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products sulfamates(salts).
[[Page 13341]]
P-16-0382.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Formic acid, compds. with
additive for hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products sulfamates(salts).
P-16-0383.......................... 12/1/2016 3/1/2017 CBI................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0383.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of an (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0383.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Formic acid, compds. with
additive for hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products acetates (salts).
P-16-0384.......................... 12/1/2016 3/1/2017 CBI................... (G) Component of (G) Propanoic acid, 2-hydroxy-,
electrocoat resin. compds. with hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products formates (salts).
P-16-0384.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Propanoic acid, 2-hydroxy-,
additive for compds. with hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products formates (salts).
P-16-0385.......................... 12/1/2016 3/1/2017 CBI................... (G) Component........ (G) Formic acid, compds. with
of electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products sulfamates(salts).
P-16-0385.......................... 12/1/2016 3/1/2017 CBI................... (S) Anti-Crater (G) Formic acid, compds. with
additive for hydrolyzed bisphenol A-
automotive epichlorohydrin-polyethylene glycol
electrocoat resin. ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products sulfamates(salts).
[[Page 13342]]
P-16-0385.......................... 12/1/2016 3/1/2017 CBI................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol A-
epichlorohydrin-polyethylene glycol
ether with bisphenol A (2:1)
polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction
products sulfamates(salts).
P-16-0388.......................... 12/22/2016 3/22/2017 CBI................... (G) Hardener for (G) Aliphatic polyamines, polymers
epoxy coating. with bisphenol A and
epichlorohydrin.
P-16-0399.......................... 12/22/2016 3/22/2017 Tryeco LLC............ (S) Agricultural soil (S) Starch, polymer with 2-propenoic
amendment for turf acid, potassium salt. oxidized.
applications and
direct soil
injection with
fertilizers.
P-16-0399.......................... 12/22/2016 3/22/2017 Tryeco LLC............ (S) Compound to be (S) Starch, polymer with 2-propenoic
used in preparation acid, potassium salt. oxidized.
of advanced seed
coatings.
P-16-0399.......................... 12/22/2016 3/22/2017 Tryeco LLC............ (S) Agricultural soil (S) Starch, polymer with 2-propenoic
amendment for filed acid, potassium salt. oxidized.
crops as ``agrisorb
plus'' granular soil
amendment.
P-16-0446.......................... 12/5/2016 3/5/2017 Allnex USA Inc........ (S) Resin in (G) Fatty acids, reaction products
architectural primer with alkylamine, polymers with
coatings. substituted carbomonocycle,
substituted alkylamines,
heteromonocycle and substituted
alkanoate, lactates (salts).
P-16-0486.......................... 12/15/2016 3/15/2017 CBI................... (G) Isolated (G) Polychloropropane.
intermediate in the
production of a
refrigerant
precursor.
P-16-0505.......................... 12/5/2016 3/5/2017 CBI................... (S) Polymeric resin (S) Poly[oxy(methyl- 1, 2-
for ultraviolet (uv) ethanediyl) ] , alpha- (1- oxo- 2-
curable acrylates. propen- 1- yl)--omega- [(1- oxo- 2-
propen- 1- yl) oxy] -.
P-16-0505.......................... 12/5/2016 3/5/2017 CBI................... (S) Polymeric resin (S) Poly[oxy(methyl- 1, 2-
for uv curable ethanediyl) ] , a- (1- oxo- 2-
acrylates. propen- 1- yl)--- [(1- oxo- 2-
propen- 1- yl) oxy] -.
P-16-0513.......................... 12/28/2016 3/28/2017 CBI................... (S) Intermediate for (G) Alkylphenol.
further reaction.
P-16-0530.......................... 12/6/2016 3/6/2017 CBI................... (S) Concrete and (S) 2-propenoic acid, 2-methyl, 2-
stone coating. (dimethylamino) ethyl ester,
polymer with ethyl 2-prpenoate, 2-
hydroxyethyl m2-propenoate and
methyl 2-methyl 2-propenoate,
acetate salt.
P-16-0543.......................... 12/19/2016 3/19/2017 CBI................... (G) Battery (G) Halogenophosphoric acid metal
ingredient. salt.
P-16-0547.......................... 12/21/2016 3/21/2017 CBI................... (G) Catalyst......... (G) Neodymium aluminium alkyl
polymer complex.
P-16-0589.......................... 12/19/2016 3/19/2017 CBI................... (G) Synthetic (G) Pentaerythritol ester of mixed
aircraft engine linear and branched carboxylic
lubricant for acids.
Contained use
industrial lubricant.
P-16-0591.......................... 12/9/2016 3/9/2017 Chromatic (G) Component of (G) Alkyl bis-phenol.
Technologies, Inc. printing ink.
P-16-0591.......................... 12/9/2016 3/9/2017 Chromatic (G) Component of (G) Alkyl bis-phenol.
Technologies, Inc. colorants.
[[Page 13343]]
P-17-0013.......................... 12/21/2016 3/21/2017 CBI................... (G) Open dispersive (G) Formaldehyde, polymer with
use component in arylylpolyamine, 2-
liquid paint coating. (chloromethyl)oxirane and phenol.
P-17-0107.......................... 12/13/2016 3/13/2017 CBI................... (S) Coreactant used (G) Hydroxyl terminated polyurethane
in an adhesive. of methylene diphenyldiisocyanate
based on polyester and polyether-
polyol.
P-17-0121.......................... 12/6/2016 3/6/2017 CBI................... (S) Polyurethane used (G) Methylene diphenyl diisocyanate
in an adhesive. terminated polyurethane resin.
P-17-0127.......................... 12/6/2016 3/6/2017 Spectrum Tracer (S) Chemical tracer (G) Halogenated benzoic acid ethyl
Services. pumped into an oil ester.
or gas well to
monitor well
performance.
P-17-0139.......................... 12/6/2016 3/6/2017 Spectrum Tracer (S) Chemical tracer (G) Halogenated benzoic acid ethyl
Services. pumped into an oil ester.
or gas well to
monitor well
performance.
P-17-0146.......................... 12/2/2016 3/2/2017 CBI................... (G) Coatings polymer. (G) Aromaticpolycarboxylic acid,
polymer with
[(aminoalkyl)amino]alkanol,(chloroa
lkyl)oxirane homopolymer etherwith
polyalkyleneoxide,alkanedioic acid,
alkyldiol, heterocyclicketone,
alicyclic polyisocyanate,
polyalkyleneoxide monoalkylether
and polyalkoxyalkylajmine, reaction
products with N-alkylalyklamine,
alkylcarboxylate (salts).
P-17-0146.......................... 12/2/2016 3/2/2017 CBI................... (G) Ink binder (G) Aromaticpolycarboxylic acid,
polymer. polymer with
[(aminoalkyl)amino]alkanol,(chloroa
lkyl)oxirane homopolymer etherwith
polyalkyleneoxide,alkanedioic acid,
alkyldiol, heterocyclicketone,
alicyclic polyisocyanate,
polyalkyleneoxide monoalkylether
and polyalkoxyalkylajmine, reaction
products with N-alkylalyklamine,
alkylcarboxylate (salts).
P-17-0157.......................... 12/20/2016 3/20/2017 CBI................... (G) Binder used in (G) Silane amine carbonate.
coating manufacture.
P-17-0163.......................... 12/8/2016 3/8/2017 CBI................... (G) Chemical (G) Substituted benzofuropyridine.
precursor.
P-17-0164.......................... 12/7/2016 3/7/2017 CBI................... (G) Intermediate (G) Substituted benzofuropyridine.
chemical.
P-17-0165.......................... 12/5/2016 3/5/2017 CBI................... (G) Electronic device (G) Fluorocyanophenyl alkylbenzoate.
use.
P-17-0166.......................... 12/12/2016 3/12/2017 CBI................... (G) Additive in (G) Rosin polymer, glycol ester.
adhesive dispersions.
P-17-0167.......................... 12/12/2016 3/12/2017 CBI................... (G) Additive in (G) Rosin polymer, glycol ester.
adhesive dispersions.
P-17-0170.......................... 12/8/2016 3/8/2017 Allnex Usa Inc........ (S) Uv curable (G) Alkanediol, 2,2-bis (substituted
coating resin for 3d alkyl)-, polymer with substituted
printing alkane, heteromonocycles,
applications. alkenoate.
P-17-0171.......................... 12/19/2016 3/19/2017 Classic Dyestuffs..... (S) Solvent dye for (S) 1,3-benzenedisulfonic acid, 4-[2-
use as ink in hot (5-cyano-1-ethyl-1,6-dihydro-2-
foil stamping. hydroxy-4-methyl-6-oxo-3-
pyridinyl)diazenyl]-, sodium salt
(1:2).
P-17-0172.......................... 12/8/2016 3/8/2017 CBI................... (G) Lubricating oil (G) Sulfurized alkylphenol, calcium
additive. salts.
P-17-0173.......................... 12/14/2016 3/14/2017 CBI................... (G) Chemical/polymer (G) Polydimethysiloxane eugenol
modification. group-terminated.
P-17-0174.......................... 12/12/2016 3/12/2017 CBI................... (G) Plastics additive (G) Alkyltriethoxysilylpolysiloxane.
[[Page 13344]]
P-17-0176.......................... 12/12/2016 3/12/2017 CBI................... (G) Battery (G) Carbonic acid, alkyl
ingredient. carbomonocyclic ester.
P-17-0177.......................... 12/13/2016 3/13/2017 Shin-Etsu Microsi..... (G) Microlithography (G) Monoheteropentacycloalkane-4-
for electronic carboxylic acid, substituted-
device Manufacturing. cycloalkyl ester.
P-17-0178.......................... 12/13/2016 3/13/2017 Shin-Etsu Microsi..... (G) Microlithography (G) Sulfonium, triphenyl-, salt with
for electronic substituted-alkyl 4-substituted-
device manufacturing. benzoate.
P-17-0179.......................... 12/21/2016 3/21/2017 CBI................... (S) Modified (G) Modified carboxypolyamine salt.
carboxypolyamine
salt used as a
dispersing additive
for pigments in
industrial paints
and coatings.
P-17-0180.......................... 12/20/2016 3/20/2017 CBI................... (S) Modified acids (G) Modified acids polymer with
polymer with polyols polyols and anhydride.
and anhydride used
as a dispersing
additive for
pigments in
industrial paints
and coatings.
P-17-0181.......................... 12/16/2016 3/16/2017 CBI................... (G) Polymeric (G) 2-propanol, aklylamino, polymer
dispersant. with 2,4-diisocyanato-1-
methylbenzene and 2,2'-
iminobis[ethanol], 2-oxepanone
homopolymer lauryl ester- and
polypropylene glycol 2-
aminomethylethyl branched
nonylphenyl ether-blocked.
P-17-0184.......................... 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Transportation (S) 1-propanaminium, 2-hydroxy-N, N-
washes. dimethyl-N-[3-[(1-oxooctyl-
amino]propyl]-3-sulfo-, inner salt.
P-17-0184.......................... 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Industrial all- (S) 1-propanaminium, 2-hydroxy-N, N-
purpose cleaners. dimethyl-N-[3-[(1-oxooctyl-
amino]propyl]-3-sulfo-, inner salt.
P-17-0184.......................... 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Personal care (S) 1-propanaminium, 2-hydroxy-N, N-
products, shampoos, dimethyl-N-[3-[(1-oxooctyl-
facial washes. amino]propyl]-3-sulfo-, inner salt.
P-17-0184.......................... 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Firefighting (S) 1-propanaminium, 2-hydroxy-N, N-
foams. dimethyl-N-[3-[(1-oxooctyl-
amino]propyl]-3-sulfo-, inner salt.
P-17-0185.......................... 12/20/2016 3/20/2017 CBI................... (G) Additive, open, (G) Fatty acids, C18-unsaturated
non-dispersive use. (unsatd.), dimers, hydrogenated,
polymers with C18-unsatd. fatty
acid trimers, alkylenediamine and
hydroxyalkanoic acid.
P-17-0186.......................... 12/20/2016 3/20/2017 CBI................... (G) Additive, open, (G) 2,5-furandione, telomer with
non-dispersive use. 1,1'-(1,1-dimethyl-3-methylene-1,3-
propanediyl)bis[benzene] and
ethenylbenzene, carbonmonocycle
alkyl ester, esters with
polyalkylene glycol mono alkyl
ethers, ammonium salts, 2,2'-(1,2-
diazenediyl)bis[2-
methylbutanenitrile]-initiated.
P-17-0190.......................... 12/26/2016 3/26/2017 CBI................... (G) A polymer in (G) Butanoic acid, 3-oxo-, 2-[(2-
paints and methyl-1-oxo-2-propen-1-
architectural yl)oxy]ethyl ester, polymer with
coatings. cycloalkyl 2-methyl-2-propenoate,
ethenylbenzene, 2-ethylhexyl 2-
propenoate, methyl 2-methyl-2-
propenoate and 2-methylpropyl 2-
methyl-2- propenoate.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 10 NOCs received by EPA during this period, Table 2
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
[[Page 13345]]
Table 2--NOCs Received From December 1, 2016 to December 30, 2016
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date Chemical
----------------------------------------------------------------------------------------------------------------
J-15-0033.................................. 12/22/2016 12/21/2016 (G) Modified trichoderma reesei
strain.
J-16-0033.................................. 12/19/2016 12/4/2016 (G) Saccharomyces cerevisiae,
modified to express glucoamylase
activity.
P-07-0177.................................. 12/15/2016 9/11/2007 (S) Isocyanic acid,
polymethylenepolyphenylene ester,
polymer with methoxylated
dehydrochlorinated brominated 2-
butyne-1,4-diolepichlorohydrin
polymer.
P-07-0395.................................. 12/5/2016 7/29/2007 (G) Dialkyl formamide.
P-14-0713.................................. 12/7/2016 11/20/2016 (S) Plastics, wastes, pyrolyzed, C5-
12 oil.
P-14-0714.................................. 12/7/2016 11/20/2016 (S) Plastics, wastes, pyrolyzed, C9-
20 pyrolysis oil.
P-14-0715.................................. 12/7/2016 11/20/2016 (S) Waste plastics, pyrolyzed, C20-
55 fraction.
P-16-0074.................................. 12/20/2016 12/1/2016 (G) Isocyanate terminated
polyurethane.
P-16-0248.................................. 12/5/2016 11/18/2016 (G) Poly(oxy-1,2-ethanediyl),
[eacute],[eacute]'-
[(1,methylethylidene)di-4,1-
phenylene]bis[[iuml]-hydroxy-,
polymer with aliphatic
diisocyanate, propylene glycol
monomethacrylate-blocked.
P-16-0492.................................. 12/21/2016 12/10/2016 (G) Polyester-amide polymer of
`isophthalic acid' with diamino-
alkane, cyclohexane-dialcohol,
alkanetriol, di-isocyanate and
acrylic acid-ethylene copolymer.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: January 30, 2017.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2017-04772 Filed 3-9-17; 8:45 am]
BILLING CODE 6560-50-P
