Foreign-Trade Zone (FTZ) 265-Conroe, Texas; Notification of Proposed Production Activity; Bauer Manufacturing LLC dba NEORig (Stationary Oil/Gas Drilling Rigs); Conroe, Texas, 12788-12789 [2017-04441]
Download as PDF
<![CDATA[
12788
Federal Register / Vol. 82, No. 43 / Tuesday, March 7, 2017 / Notices
Web site, which is accessible via
www.trade.gov/ftz.
For further information, contact
Camille Evans at Camille.Evans@
trade.gov or (202) 482–2350.
Web site, which is accessible via
www.trade.gov/ftz.
For further information, contact
Camille Evans at Camille.Evans@
trade.gov or (202) 482–2350.
Dated: March 2, 2017.
Earl Comstock,
Director of Policy and Strategic Planning.
Dated: March 2, 2017.
Andrew McGilvray,
Executive Secretary.
Dated: March 2, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017–04516 Filed 3–3–17; 11:15 am]
[FR Doc. 2017–04443 Filed 3–6–17; 8:45 am]
[FR Doc. 2017–04437 Filed 3–6–17; 8:45 am]
BILLING CODE 3510–17–P
BILLING CODE 3510–DS–P
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
DEPARTMENT OF COMMERCE
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
Foreign-Trade Zones Board
Foreign-Trade Zones Board
[S–28–2017]
[S–29–2017]
[B–15–2017]
Foreign-Trade Zone 163—Ponce,
Puerto Rico; Application for Subzone;
Caribe Rx Services, Inc.; Caguas,
Puerto Rico
sradovich on DSK3GMQ082PROD with NOTICES
3. Please provide any other specific
recommendations, not addressed by the
questions above, that you believe would
help reduce unnecessary Federal agency
regulation of your business.
Foreign-Trade Zone 163—Ponce,
Puerto Rico; Application for Subzone;
R.Ortiz Auto Distributors, Inc.; Caguas,
Puerto Rico
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by CODEZOL, C.D., grantee of
FTZ 163, requesting subzone status for
the facility of Caribe Rx Services, Inc.,
located in Caguas, Puerto Rico. The
application was submitted pursuant to
the provisions of the Foreign-Trade
Zones Act, as amended (19 U.S.C. 81a–
81u), and the regulations of the Board
(15 CFR part 400). It was formally
docketed on March 1, 2017.
The proposed subzone (2.1 acres) is
located at Road #1 Km. 39.9, Bo.
Turabo, Caguas, Puerto Rico. The
proposed subzone would be subject to
the existing activation limit of FTZ 163.
No authorization for production activity
has been requested at this time. The
proposed subzone encompasses the
boundaries of FTZ 163—Site 14 which
expires May 31, 2017.
In accordance with the Board’s
regulations, Camille Evans of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
17, 2017. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
May 1, 2017.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by CODEZOL, C.D., grantee of
FTZ 163, requesting subzone status for
the facility of R.Ortiz Auto Distributors,
Inc., located in Caguas, Puerto Rico. The
application was submitted pursuant to
the provisions of the Foreign-Trade
Zones Act, as amended (19 U.S.C. 81a–
81u), and the regulations of the Board
(15 CFR 400). It was formally docketed
on March 1, 2017.
The proposed subzone (1.8 acres) is
located at Road #189 Km. 2.0, Caguax
Industrial Park, Caguas, Puerto Rico.
The proposed subzone would be subject
to the existing activation limit of FTZ
163. No authorization for production
activity has been requested at this time.
The proposed subzone encompasses the
boundaries of FTZ 163—Site 15 which
expires May 31, 2017.
In accordance with the Board’s
regulations, Camille Evans of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
17, 2017. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
May 1, 2017.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
Foreign-Trade Zone (FTZ) 265—
Conroe, Texas; Notification of
Proposed Production Activity; Bauer
Manufacturing LLC dba NEORig
(Stationary Oil/Gas Drilling Rigs);
Conroe, Texas
VerDate Sep<11>2014
16:01 Mar 06, 2017
Jkt 241001
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
The City of Conroe, Texas, grantee of
FTZ 265, submitted a notification of
proposed production activity to the FTZ
Board on behalf of Bauer Manufacturing
LLC dba NEORig (Bauer), located in
Conroe, Texas. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on February 24,
2017.
Bauer already has authority to
produce pile drivers and leads, boring
machinery, foundation construction
equipment, foundation casings and
related parts and sub-assemblies, tools
and accessories for pile drivers, and
stationary oil/gas drilling rigs and
related subassemblies within Site 1 of
FTZ 265. The current request would add
foreign status materials/components to
the scope of authority. Pursuant to 15
CFR 400.14(b), additional FTZ authority
would be limited to the specific foreignstatus materials/components described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt Bauer from customs duty
payments on the foreign-status
materials/components used in export
production. On its domestic sales, Bauer
would be able to choose the duty rates
during customs entry procedures that
apply to the company’s finished
products previously approved by the
FTZ Board (duty rate ranges from dutyfree to 5%) for the foreign-status
materials/components noted below and
in the existing scope of authority.
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment.
The materials/components sourced
from abroad include: V-belts (without
E:\FR\FM\07MRN1.SGM
07MRN1
Federal Register / Vol. 82, No. 43 / Tuesday, March 7, 2017 / Notices
textiles); V-belts (with textiles); steel
structures for rigs; deadline anchors;
filters for internal combustion engines;
utility winches; hand winches; copper,
iron and steel non-return check valves;
safety/relief valves; blowout preventer
stacks; tapered roller bearings; spherical
roller bearings; cylindrical roller
bearings; combined ball/roller bearings;
combined ball and spherical roller
bearings; combined ball and needle
roller bearings; combined ball and
cylindrical roller beatings; transformers
with a capacity not exceeding 1KVA;
telephones; CCTV systems;
potentionmeters; fluorescent discharge
lamps; optical fiber cables; and,
hydraulic power units (duty rate ranges
from duty-free to 6.6%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
17, 2017.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
Web site, which is accessible via
www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202)
482–0473.
Dated: March 2, 2017.
Andrew McGilvray,
Executive Secretary.
The proposed subzone (5.8 acres) is
located at Calle B Lots 5 and 6, Bo.
Canas, Playa de Ponce, Ponce, Puerto
Rico. The proposed subzone would be
subject to the existing activation limit of
FTZ 163. No authorization for
production activity has been requested
at this time. The proposed subzone
encompasses the boundaries of FTZ
163—Site 16 which expires May 31,
2017.
In accordance with the Board’s
regulations, Camille Evans of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
17, 2017. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
May 1, 2017.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
Web site, which is accessible via
www.trade.gov/ftz.
For further information, contact
Camille Evans at Camille.Evans@
trade.gov or (202) 482–2350.
[FR Doc. 2017–04441 Filed 3–6–17; 8:45 am]
BILLING CODE 3510–DS–P
[FR Doc. 2017–04436 Filed 3–6–17; 8:45 am]
DEPARTMENT OF COMMERCE
DEPARTMENT OF COMMERCE
sradovich on DSK3GMQ082PROD with NOTICES
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by CODEZOL, C.D., grantee of
FTZ 163, requesting subzone status for
´
´
the facilities of Destilerıa Serralles, Inc.,
located in Ponce, Puerto Rico. The
application was submitted pursuant to
the provisions of the Foreign-Trade
Zones Act, as amended (19 U.S.C. 81a–
81u), and the regulations of the Board
(15 CFR part 400). It was formally
docketed on March 1, 2017.
VerDate Sep<11>2014
16:01 Mar 06, 2017
Jkt 241001
[S–169–2016]
Approval of Subzone Status; Brake
Parts Inc.; Hazleton, Pennsylvania
On December 1, 2016, the Executive
Secretary of the Foreign-Trade Zones
(FTZ) Board docketed an application
submitted by the Eastern Distribution
Center, Inc., grantee of FTZ 24,
requesting subzone status subject to the
existing activation limit of FTZ 24, on
behalf of Brake Parts Inc., in Hazleton,
Pennsylvania.
The application was processed in
accordance with the FTZ Act and
Regulations, including notice in the
Federal Register inviting public
PO 00000
Frm 00008
Fmt 4703
[FR Doc. 2017–04442 Filed 3–6–17; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Sensors and Instrumentation
Technical Advisory Committee; Notice
of Partially Closed Meeting
The Sensors and Instrumentation
Technical Advisory Committee (SITAC)
will meet on April 18, 2017, 9:30 a.m.,
in the Herbert C. Hoover Building,
Room 3884, 14th Street between
Constitution and Pennsylvania Avenues
NW., Washington, DC. The Committee
advises the Office of the Assistant
Secretary for Export Administration on
technical questions that affect the level
of export controls applicable to sensors
and instrumentation equipment and
technology.
Sfmt 4703
1. Welcome and Introductions.
2. Remarks from the Bureau of Industry
and Security Management.
3. Industry Presentations.
4. New Business.
Closed Session
Foreign-Trade Zones Board
Foreign-Trade Zone 163—Ponce,
Puerto Rico; Application for Subzone;
´
´
Destilerıa Serralles, Inc.; Ponce, Puerto
Rico
Dated: March 2, 2016.
Andrew McGilvray,
Executive Secretary.
Public Session
BILLING CODE 3510–DS–P
[S–30–2017]
comment (81 FR 88213, December 7,
2016). The FTZ staff examiner reviewed
the application and determined that it
meets the criteria for approval. Pursuant
to the authority delegated to the FTZ
Board Executive Secretary (15 CFR Sec.
400.36(f)), the application to establish
Subzone 24E is approved, subject to the
FTZ Act and the Board’s regulations,
including Section 400.13, and further
subject to FTZ 24’s 2,000-acre activation
limit.
Agenda
Dated: March 2, 2017.
Andrew McGilvray,
Executive Secretary.
Foreign-Trade Zones Board
12789
5. Discussion of matters determined to
be exempt from the provisions
relating to public meetings found in 5
U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3).
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at Yvette.Springer@
bis.doc.gov no later than April 11, 2017.
A limited number of seats will be
available during the public session of
the meeting. Reservations are not
accepted. To the extent that time
permits, members of the public may
present oral statements to the
Committee. The public may submit
written statements at any time before or
E:\FR\FM\07MRN1.SGM
07MRN1
]]>Agencies
[Federal Register Volume 82, Number 43 (Tuesday, March 7, 2017)]
[Notices]
[Pages 12788-12789]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-04441]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-15-2017]
Foreign-Trade Zone (FTZ) 265--Conroe, Texas; Notification of
Proposed Production Activity; Bauer Manufacturing LLC dba NEORig
(Stationary Oil/Gas Drilling Rigs); Conroe, Texas
The City of Conroe, Texas, grantee of FTZ 265, submitted a
notification of proposed production activity to the FTZ Board on behalf
of Bauer Manufacturing LLC dba NEORig (Bauer), located in Conroe,
Texas. The notification conforming to the requirements of the
regulations of the FTZ Board (15 CFR 400.22) was received on February
24, 2017.
Bauer already has authority to produce pile drivers and leads,
boring machinery, foundation construction equipment, foundation casings
and related parts and sub-assemblies, tools and accessories for pile
drivers, and stationary oil/gas drilling rigs and related subassemblies
within Site 1 of FTZ 265. The current request would add foreign status
materials/components to the scope of authority. Pursuant to 15 CFR
400.14(b), additional FTZ authority would be limited to the specific
foreign-status materials/components described in the submitted
notification (as described below) and subsequently authorized by the
FTZ Board.
Production under FTZ procedures could exempt Bauer from customs
duty payments on the foreign-status materials/components used in export
production. On its domestic sales, Bauer would be able to choose the
duty rates during customs entry procedures that apply to the company's
finished products previously approved by the FTZ Board (duty rate
ranges from duty-free to 5%) for the foreign-status materials/
components noted below and in the existing scope of authority. Customs
duties also could possibly be deferred or reduced on foreign-status
production equipment.
The materials/components sourced from abroad include: V-belts
(without
[[Page 12789]]
textiles); V-belts (with textiles); steel structures for rigs; deadline
anchors; filters for internal combustion engines; utility winches; hand
winches; copper, iron and steel non-return check valves; safety/relief
valves; blowout preventer stacks; tapered roller bearings; spherical
roller bearings; cylindrical roller bearings; combined ball/roller
bearings; combined ball and spherical roller bearings; combined ball
and needle roller bearings; combined ball and cylindrical roller
beatings; transformers with a capacity not exceeding 1KVA; telephones;
CCTV systems; potentionmeters; fluorescent discharge lamps; optical
fiber cables; and, hydraulic power units (duty rate ranges from duty-
free to 6.6%).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is April 17, 2017.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202) 482-0473.
Dated: March 2, 2017.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2017-04441 Filed 3-6-17; 8:45 am]
BILLING CODE 3510-DS-P
