Information and Communication Technology (ICT) Standards and Guidelines, 12295-12296 [2017-04059]
Download as PDF
Federal Register / Vol. 82, No. 40 / Thursday, March 2, 2017 / Rules and Regulations
3. Will not affect intrastate aviation in
Alaska to the extent that it justifies
making a regulatory distinction; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared an economic evaluation
of the estimated costs to comply with
this AD and placed it in the AD docket.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive (AD):
■
2017–05–03 Airbus Helicopters
Deutschland GmbH (Previously
Eurocopter Deutschland GmbH):
Amendment 39–18813; Docket No.
FAA–2017–0155; Directorate Identifier
2016–SW–051–AD.
pmangrum on DSK3GDR082PROD with RULES
(a) Applicability
This AD applies to Airbus Helicopters
Deutschland GmbH Model BO–105C, BO–
105LS A–3, and BO–105S helicopters,
certificated in any category, with a main rotor
blade (MRB) part number 105–15103, 105–
15141, 105–15141V001, 105–15143, 105–
15150, 105–15150V001, 105–15152, 105–
81013, 105–87214, 1120–15101, or 1120–
15103 that has less than 200 hours time-inservice (TIS) since the MRB erosion
protective shell (shell) was last replaced, and
where the shell was last replaced between
December 1, 2010, and February 28, 2015,
inclusive or where the most recent date of
replacement of the shell is unknown.
(b) Unsafe Condition
This AD defines the unsafe condition as
debonding of the shell of an MRB. This
condition could result in loss of the shell inflight, which could strike the tailboom or tail
rotor, resulting in loss of tail rotor control,
high main rotor vibration, and subsequent
loss of control of the helicopter.
(c) Effective Date
This AD becomes effective March 17, 2017.
(d) Compliance
You are responsible for performing each
action required by this AD within the
VerDate Sep<11>2014
13:48 Mar 01, 2017
Jkt 241001
specified compliance time unless it has
already been accomplished prior to that time.
(e) Required Actions
Within 10 hours TIS, and thereafter at
intervals not to exceed 50 hours TIS:
(1) Inspect by tap test each MRB for
debonding of the shell.
(2) If the shell has debonded in any area,
before further flight, repair any debonding
that does not exceed the maximum repair
damage limits, or replace the MRB.
(f) Alternative Methods of Compliance
(AMOCs)
(1) The Manager, Safety Management
Group, FAA, may approve AMOCs for this
AD. Send your proposal to: Matt Fuller,
Senior Aviation Safety Engineer, Safety
Management Group, Rotorcraft Directorate,
FAA, 10101 Hillwood Pkwy., Fort Worth, TX
76177; telephone (817) 222–5110; email 9ASW-FTW-AMOC-Requests@faa.gov.
(2) For operations conducted under a 14
CFR part 119 operating certificate or under
14 CFR part 91, subpart K, we suggest that
you notify your principal inspector, or
lacking a principal inspector, the manager of
the local flight standards district office or
certificate holding district office, before
operating any aircraft complying with this
AD through an AMOC.
(g) Additional Information
(1) Airbus Helicopters Emergency Alert
Service Bulletin (EASB) BO105–10A–128 for
Model BO105C, D, and S helicopters and
EASB BO105 LS–10A–016 for Model BO105
LS A–3 helicopters, both Revision 0, and
dated June 16, 2016, which are not
incorporated by reference, contain additional
information about the subject of this final
rule. For service information identified in
this final rule, contact Airbus Helicopters,
2701 N. Forum Drive, Grand Prairie, TX
75052; telephone (972) 641–0000 or (800)
232–0323; fax (972) 641–3775; or at https://
www.airbushelicopters.com/techpub. You
may review a copy of the service information
at the FAA, Office of the Regional Counsel,
Southwest Region, 10101 Hillwood Pkwy.,
Room 6N–321, Fort Worth, TX 76177.
(2) The subject of this AD is addressed in
European Aviation Safety Agency (EASA)
Emergency AD No. 2016–0118–E, dated June
17, 2016. You may view the EASA AD on the
Internet at https://www.regulations.gov by
searching for and locating it in Docket No.
FAA–2017–0155.
(h) Subject
Joint Aircraft Service Component (JASC)
Code: 6210 Main Rotor Blade.
Issued in Fort Worth, Texas, on February
21, 2017.
Lance T. Gant,
Manager, Rotorcraft Directorate, Aircraft
Certification Service.
[FR Doc. 2017–03963 Filed 3–1–17; 8:45 am]
BILLING CODE 4910–13–P
PO 00000
Frm 00007
Fmt 4700
Sfmt 4700
12295
ARCHITECTURAL AND
TRANSPORTATION BARRIERS
COMPLIANCE BOARD
36 CFR Parts 1193 and 1194
RIN 3014–AA37
Information and Communication
Technology (ICT) Standards and
Guidelines
Architectural and
Transportation Barriers Compliance
Board.
ACTION: Final rule; delay of effective
date.
AGENCY:
The Architectural and
Transportation Barriers Compliance
Board (Access Board) is briefly
postponing the effective date of its
recently-promulgated final rule that
establishes revised accessibility
standards and guidelines for
information and communication
technology (ICT). The ICT final rule was
published in the Federal Register on
January 18, 2017, and is scheduled to
become effective on March 20, 2017. A
brief postponement of this effective date
is necessitated by the memorandum
from the Assistant to the President and
Chief of Staff, entitled ‘‘Regulatory
Freeze Pending Review’’ (Jan. 20, 2017),
which generally calls on Federal
agencies to delay the effective dates of
published, but not-yet-effective, final
rules for 60 days from the date of the
memorandum. The ICT final rule will
take effect on March 21, 2017.
DATES: The effective date of the final
rule published on January 18, 2017 at 82
FR 5790 is delayed to March 21, 2017.
However, compliance with the section
508-based standards is not required
until January 18, 2018, which is one
year after the final rule’s original
publication date. Compliance with the
section 255-based guidelines is not
required until the guidelines are
adopted by the Federal Communications
Commission. The incorporation by
reference of certain publications listed
in the final rule published on January
18, 2017 at 82 FR 5790 is approved by
the Director of the Federal Register as of
March 21, 2017.
FOR FURTHER INFORMATION CONTACT:
Frances Spiegel, Attorney Advisor,
Office of General Counsel, U.S. Access
Board, 1331 F Street NW., Suite 1000,
Washington, DC 20004–1111.
Telephone number: (202) 272–0041.
Email address: spiegel@accessboard.gov.
SUMMARY:
On
January 18, 2017, the Access Board
issued a final rule that revised and
SUPPLEMENTARY INFORMATION:
E:\FR\FM\02MRR1.SGM
02MRR1
pmangrum on DSK3GDR082PROD with RULES
12296
Federal Register / Vol. 82, No. 40 / Thursday, March 2, 2017 / Rules and Regulations
updated, in a single rulemaking, our
existing standards for information and
technology (ICT) covered by section 508
of the Rehabilitation Act of 1973 (which
includes, among other things, ICT
developed, procured, maintained, or
used by Federal agencies) (hereafter,
‘‘Revised 508 Standards’’), and our
existing guidelines for
telecommunications equipment and
customer premises equipment covered
by Section 255 of the Communications
Act of 1934 (hereafter, ‘‘Revised 255
Guidelines.’’). See Information and
Communication Technology Standards
and Guidelines, 82 FR 5790 (Jan. 18,
2017) (to be codified at 36 CFR parts
1193 and 1194). The published notice
for the ICT final rule provided that the
rule would take effect on March 20,
2017.
Subsequently, on January 20, 2017,
the Assistant to the President and Chief
of Staff, issued a memorandum entitled
‘‘Regulatory Freeze Pending Review.’’
This memorandum instructed Federal
departments and agencies, among other
things, to temporarily postpone for 60
days (dating from the date of the
memorandum) the effective dates of
their respective regulations that had
been published in the Federal Register
but were not yet effective.
In accordance with the January 20
memorandum, the Access Board is
briefly postponing the effective date of
the ICT final rule until March 21, 2017,
which represents a one-day delay in the
effective date of this final rule relative
to its originally-scheduled effective
date. There is no change to the
substance of the Revised 508 Standards
or Revised 255 Guidelines. Nor does
this brief postponement of the effective
date alter the compliance date for
certain ICT covered by the Revised 508
Standards, which remains January 18,
2018 (i.e., one year after original
publication date of ICT final rule).
Pursuant to the Administrative
Procedure Act (APA) (5 U.S.C. 553), the
Access Board generally provides
interested parties the opportunity to
comment on proposed regulations and
publishes rules not less than 30 days
before their effective dates. However,
the APA provides that an agency is not
required to conduct notice-andcomment rulemaking or delay effective
dates when the agency, for good cause,
finds that these procedural requirements
would be impracticable, unnecessary, or
contrary to the public interest. See 5
U.S.C. 553(b)(B) and (d)(3). Here, a oneday postponement of the effective date
of the ICT final rule, as called for in the
January 20 memorandum, would neither
delay the final rule’s implementation to
any material degree nor alter the
VerDate Sep<11>2014
13:48 Mar 01, 2017
Jkt 241001
originally-established compliance date
for the Revised 508 Standards.
Accordingly, because a one-day delay in
the effective date of the ICT final rule
will have no material impact on its
implementation, the Access Board finds
that good cause exists to exempt the
instant rule from notice-and-comment
requirements. See 5 U.S.C. 553(b)(B).
Additionally, because a one-day
postponement of the ICT final rule’s
originally-published effective date will
have no substantive impact, the instant
rule is being made effective upon
publication in the Federal Register and,
in any event, a 30-day delay in its
effective date would be impracticable
and unnecessary in these circumstances.
See 5 U.S.C. 553(d)(3) (exempting
substantive rules from requisite 30-day
delay in effective date upon finding of
good cause).
David M. Capozzi,
Executive Director.
[FR Doc. 2017–04059 Filed 3–1–17; 8:45 am]
BILLING CODE 8150–01–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
50 CFR Part 635
[Docket Nos. 120328229–4949–02 and
150121066–5717–02]
RIN 0648–XF210
Atlantic Highly Migratory Species;
Atlantic Bluefin Tuna Fisheries
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Temporary rule; annual
adjustment of Atlantic bluefin tuna
Purse Seine and Reserve category
quotas; inseason quota transfer from the
Reserve category to the Longline
category.
AGENCY:
NMFS is adjusting the
Atlantic bluefin tuna (BFT) Purse Seine
and Reserve category quotas for 2017, as
it does annually. NMFS is also
transferring inseason 45 metric tons (mt)
of BFT quota from the Reserve category
to the Longline category. This action is
based on consideration of the regulatory
determination criteria regarding
inseason adjustments. NMFS has
decided that the transfer to the Longline
category will be distributed to permitted
Atlantic Tunas Longline vessels with
recent fishing activity, rather than to all
qualified Individual Bluefin Quota (IBQ)
SUMMARY:
PO 00000
Frm 00008
Fmt 4700
Sfmt 4700
shares recipients. As a result of this
transfer, the associated IBQ accounts
will each receive 1,102 lb (0.5 mt) of
IBQ.
DATES: Effective February 28, 2017,
through December 31, 2017.
FOR FURTHER INFORMATION CONTACT:
Sarah McLaughlin, Tom Warren, or
Brad McHale, 978–281–9260, or Carrie
Soltanoff, 301–427–8503.
SUPPLEMENTARY INFORMATION:
Regulations implemented under the
authority of the Atlantic Tunas
Convention Act (ATCA; 16 U.S.C. 971 et
seq.) and the Magnuson-Stevens Fishery
Conservation and Management Act
(Magnuson-Stevens Act; 16 U.S.C. 1801
et seq.) governing the harvest of BFT by
persons and vessels subject to U.S.
jurisdiction are found at 50 CFR part
635. Section 635.27 subdivides the U.S.
BFT quota recommended by the
International Commission for the
Conservation of Atlantic Tunas (ICCAT)
among the various domestic fishing
categories, per the allocations
established in the 2006 Consolidated
Atlantic Highly Migratory Species
Fishery Management Plan (2006
Consolidated HMS FMP) (71 FR 58058,
October 2, 2006), as amended by
Amendment 7 to the 2006 Consolidated
HMS FMP (Amendment 7) (79 FR
71510, December 2, 2014). NMFS is
required under ATCA and the
Magnuson-Stevens Act to provide U.S.
fishing vessels with a reasonable
opportunity to harvest the ICCATrecommended quota.
Annual Adjustment of the BFT Purse
Seine and Reserve Category Quotas
In 2015, NMFS implemented a final
rule that increased the U.S. BFT quota
and subquotas consistent with ICCAT
Recommendation 14–05 (80 FR 52198,
August 28, 2015). As a result, based on
the currently codified U.S. quota of
1,058.79 mt (not including the 25 mt
allocated by ICCAT to the United States
to account for bycatch of BFT in pelagic
longline fisheries in the Northeast
Distant Gear Restricted Area), the
baseline Purse Seine, Longline, and
Reserve category quotas are codified as
184.3 mt, 148.3 mt, and 24.8 mt,
respectively. See § 635.27(a).
Pursuant to § 635.27(a)(4), NMFS has
determined the amount of quota
available to individual Atlantic Tunas
Purse Seine category participants in
2017, based on their BFT catch
(landings and dead discards) in 2016. In
accordance with the regulations, NMFS
is making available to each Purse Seine
category participant either 100 percent,
75 percent, 50 percent, or 25 percent of
the individual baseline quota
E:\FR\FM\02MRR1.SGM
02MRR1
Agencies
[Federal Register Volume 82, Number 40 (Thursday, March 2, 2017)]
[Rules and Regulations]
[Pages 12295-12296]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-04059]
=======================================================================
-----------------------------------------------------------------------
ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD
36 CFR Parts 1193 and 1194
RIN 3014-AA37
Information and Communication Technology (ICT) Standards and
Guidelines
AGENCY: Architectural and Transportation Barriers Compliance Board.
ACTION: Final rule; delay of effective date.
-----------------------------------------------------------------------
SUMMARY: The Architectural and Transportation Barriers Compliance Board
(Access Board) is briefly postponing the effective date of its
recently-promulgated final rule that establishes revised accessibility
standards and guidelines for information and communication technology
(ICT). The ICT final rule was published in the Federal Register on
January 18, 2017, and is scheduled to become effective on March 20,
2017. A brief postponement of this effective date is necessitated by
the memorandum from the Assistant to the President and Chief of Staff,
entitled ``Regulatory Freeze Pending Review'' (Jan. 20, 2017), which
generally calls on Federal agencies to delay the effective dates of
published, but not-yet-effective, final rules for 60 days from the date
of the memorandum. The ICT final rule will take effect on March 21,
2017.
DATES: The effective date of the final rule published on January 18,
2017 at 82 FR 5790 is delayed to March 21, 2017. However, compliance
with the section 508-based standards is not required until January 18,
2018, which is one year after the final rule's original publication
date. Compliance with the section 255-based guidelines is not required
until the guidelines are adopted by the Federal Communications
Commission. The incorporation by reference of certain publications
listed in the final rule published on January 18, 2017 at 82 FR 5790 is
approved by the Director of the Federal Register as of March 21, 2017.
FOR FURTHER INFORMATION CONTACT: Frances Spiegel, Attorney Advisor,
Office of General Counsel, U.S. Access Board, 1331 F Street NW., Suite
1000, Washington, DC 20004-1111. Telephone number: (202) 272-0041.
Email address: board.gov">spiegel@access-board.gov.
SUPPLEMENTARY INFORMATION: On January 18, 2017, the Access Board issued
a final rule that revised and
[[Page 12296]]
updated, in a single rulemaking, our existing standards for information
and technology (ICT) covered by section 508 of the Rehabilitation Act
of 1973 (which includes, among other things, ICT developed, procured,
maintained, or used by Federal agencies) (hereafter, ``Revised 508
Standards''), and our existing guidelines for telecommunications
equipment and customer premises equipment covered by Section 255 of the
Communications Act of 1934 (hereafter, ``Revised 255 Guidelines.'').
See Information and Communication Technology Standards and Guidelines,
82 FR 5790 (Jan. 18, 2017) (to be codified at 36 CFR parts 1193 and
1194). The published notice for the ICT final rule provided that the
rule would take effect on March 20, 2017.
Subsequently, on January 20, 2017, the Assistant to the President
and Chief of Staff, issued a memorandum entitled ``Regulatory Freeze
Pending Review.'' This memorandum instructed Federal departments and
agencies, among other things, to temporarily postpone for 60 days
(dating from the date of the memorandum) the effective dates of their
respective regulations that had been published in the Federal Register
but were not yet effective.
In accordance with the January 20 memorandum, the Access Board is
briefly postponing the effective date of the ICT final rule until March
21, 2017, which represents a one-day delay in the effective date of
this final rule relative to its originally-scheduled effective date.
There is no change to the substance of the Revised 508 Standards or
Revised 255 Guidelines. Nor does this brief postponement of the
effective date alter the compliance date for certain ICT covered by the
Revised 508 Standards, which remains January 18, 2018 (i.e., one year
after original publication date of ICT final rule).
Pursuant to the Administrative Procedure Act (APA) (5 U.S.C. 553),
the Access Board generally provides interested parties the opportunity
to comment on proposed regulations and publishes rules not less than 30
days before their effective dates. However, the APA provides that an
agency is not required to conduct notice-and-comment rulemaking or
delay effective dates when the agency, for good cause, finds that these
procedural requirements would be impracticable, unnecessary, or
contrary to the public interest. See 5 U.S.C. 553(b)(B) and (d)(3).
Here, a one-day postponement of the effective date of the ICT final
rule, as called for in the January 20 memorandum, would neither delay
the final rule's implementation to any material degree nor alter the
originally-established compliance date for the Revised 508 Standards.
Accordingly, because a one-day delay in the effective date of the ICT
final rule will have no material impact on its implementation, the
Access Board finds that good cause exists to exempt the instant rule
from notice-and-comment requirements. See 5 U.S.C. 553(b)(B).
Additionally, because a one-day postponement of the ICT final rule's
originally-published effective date will have no substantive impact,
the instant rule is being made effective upon publication in the
Federal Register and, in any event, a 30-day delay in its effective
date would be impracticable and unnecessary in these circumstances. See
5 U.S.C. 553(d)(3) (exempting substantive rules from requisite 30-day
delay in effective date upon finding of good cause).
David M. Capozzi,
Executive Director.
[FR Doc. 2017-04059 Filed 3-1-17; 8:45 am]
BILLING CODE 8150-01-P