Small Business Size Standards for Manufacturing; Correction, 93583 [2016-30568]

Download as PDF Federal Register / Vol. 81, No. 245 / Wednesday, December 21, 2016 / Rules and Regulations Authority: 12 U.S.C. 2601, 2603–2605, 2607, 2609, 2617, 3353, 5511, 5512, 5532, 5581; 15 U.S.C. 1601 et seq. SMALL BUSINESS ADMINISTRATION 2. In Supplement I to Part 1026, under Section 1026.35—Requirements for Higher-Priced Mortgage Loans, 35(b)(2) Exemptions, Paragraph 35(b)(2)(iii), paragraph 1.iii.E introductory text is revised and paragraph 1.iii.E.4 is added to read as follows: RIN 3245–AG50 13 CFR Part 121 ■ Supplement I to Part 1026—Official Interpretations * * * * * * * * * Section 1026.35—Requirements for HigherPriced Mortgage Loans * * * * * 35(b)(2) Exemptions. * * * * * Paragraph 35(b)(2)(iii). 1. * * * iii. * * * E. Under § 1026.35(b)(2)(iii)(C), the $2,000,000,000 asset threshold adjusts automatically each year based on the year-toyear change in the average of the Consumer Price Index for Urban Wage Earners and Clerical Workers, not seasonally adjusted, for each 12-month period ending in November, with rounding to the nearest million dollars. The Bureau will publish notice of the asset threshold each year by amending this comment. For calendar year 2017, the asset threshold is $2,069,000,000. A creditor that together with the assets of its affiliates that regularly extended first-lien covered transactions during calendar year 2016 has total assets of less than $2,069,000,000 on December 31, 2016, satisfies this criterion for purposes of any loan consummated in 2017 and for purposes of any loan consummated in 2018 for which the application was received before April 1, 2018. For historical purposes: asabaliauskas on DSK3SPTVN1PROD with RULES * * * * * 4. For calendar year 2016, the asset threshold was $2,052,000,000. A creditor that together with the assets of its affiliates that regularly extended first-lien covered transactions during calendar year 2015 had total assets of less than $2,052,000,000 on December 31, 2015, satisfied this criterion for purposes of any loan consummated in 2016 and for purposes of any loan consummated in 2017 for which the application was received before April 1, 2017. * * * * * Dated: December 15, 2016. Richard Cordray, Director, Bureau of Consumer Financial Protection. [FR Doc. 2016–30730 Filed 12–19–16; 4:15 pm] BILLING CODE 4810–AM–P VerDate Sep<11>2014 17:05 Dec 20, 2016 Jkt 241001 U.S. Small Business Administration. ACTION: Correcting amendments. AGENCY: The U.S. Small Business Administration (SBA) is correcting a final rule that appeared in the Federal Register on January 26, 2016 (81 FR 4469). The rule increased small business size standards for a number of industries in North American Industry Classification System (NAICS) Sector 31–33, Manufacturing. The rule also stated that SBA was amending Footnote 5 to the table of size standards relating to NAICS 326211, Tire Manufacturing (except Retreading), to reflect the current Census Product Classification Codes 3262111 and 3262113. However, SBA inadvertently omitted code 3262111 from the revised text in Footnote 5. This action corrects the omission. This correction does not affect the 1,500-employee small business size standard for NAICS 326211. DATES: Effective December 21, 2016. FOR FURTHER INFORMATION CONTACT: Dr. Jorge Laboy-Bruno at (202) 205–6618 or sizestandards@sba.gov, Office of Size Standards, U.S. Small Business Administration, 409 Third Street SW., Washington, DC 20416. SUPPLEMENTARY INFORMATION: On January 26, 2016, SBA published a final rule implementing changes to the size standards for a number of industries in NAICS Sectors 31–33, Manufacturing (81 FR 4469). As discussed in the preamble of the rule, SBA intended to amend paragraphs (a) and (b) of Footnote 5 to the table of size standards relating to NAICS 326211, Tire Manufacturing (except Retreading), by replacing the former Census classification codes 30111 and 30112 with the new Census Product Classification Codes 3262111 and 3262113. However, the amended text inadvertently omitted the new Census Product Classification code 3262111. This action corrects that omission, but does not affect the 1,500-employee small business size standard for NAICS 326211. SUMMARY: Subpart E—Special Rules for Certain Home Mortgage Transactions * Small Business Size Standards for Manufacturing; Correction List of Subjects in 13 CFR Part 121 Administrative practice and procedure, Government procurement, Government property, Grant programs— business, Individuals with disabilities, PO 00000 Frm 00013 Fmt 4700 Sfmt 4700 93583 Loan programs—business, Reporting and recordkeeping requirements, Small businesses. Accordingly, 13 CFR part 121 is corrected by making the following correcting amendments: PART 121—SMALL BUSINESS SIZE REGULATIONS 1. The authority citation for part 121 continues to read as follows: ■ Authority: 15 U.S.C. 632, 634(b)(6), 662, and 694a(9). § 121.201 [Amended] 2. In Footnote 5 to the table in § 121.201, amend paragraphs (a) and (b) by adding the phrase ‘‘3262111 and’’ before the number ‘‘3262113’’ each time it appears. ■ A. John Shoraka, Associate Administrator for Government Contracting and Business Development. [FR Doc. 2016–30568 Filed 12–20–16; 8:45 am] BILLING CODE 8205–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2016–9056; Directorate Identifier 2016–NM–007–AD; Amendment 39–18743; AD 2016–25–17] RIN 2120–AA64 Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. AGENCY: We are adopting a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. This AD was prompted by an occurrence that was reported of rudder pedal restriction on a SAAB Model 2000 airplane with the large potable water system (LPWS) installed, equipped with in-line heaters. This AD requires installation of shrinkable tubes on the water piping of the basic potable water system (BPWS). We are issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 25, 2017. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 25, 2017. SUMMARY: E:\FR\FM\21DER1.SGM 21DER1

Agencies

[Federal Register Volume 81, Number 245 (Wednesday, December 21, 2016)]
[Rules and Regulations]
[Page 93583]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-30568]


=======================================================================
-----------------------------------------------------------------------

SMALL BUSINESS ADMINISTRATION

13 CFR Part 121

RIN 3245-AG50


Small Business Size Standards for Manufacturing; Correction

AGENCY: U.S. Small Business Administration.

ACTION: Correcting amendments.

-----------------------------------------------------------------------

SUMMARY: The U.S. Small Business Administration (SBA) is correcting a 
final rule that appeared in the Federal Register on January 26, 2016 
(81 FR 4469). The rule increased small business size standards for a 
number of industries in North American Industry Classification System 
(NAICS) Sector 31-33, Manufacturing. The rule also stated that SBA was 
amending Footnote 5 to the table of size standards relating to NAICS 
326211, Tire Manufacturing (except Retreading), to reflect the current 
Census Product Classification Codes 3262111 and 3262113. However, SBA 
inadvertently omitted code 3262111 from the revised text in Footnote 5. 
This action corrects the omission. This correction does not affect the 
1,500-employee small business size standard for NAICS 326211.

DATES: Effective December 21, 2016.

FOR FURTHER INFORMATION CONTACT: Dr. Jorge Laboy-Bruno at (202) 205-
6618 or sizestandards@sba.gov, Office of Size Standards, U.S. Small 
Business Administration, 409 Third Street SW., Washington, DC 20416.

SUPPLEMENTARY INFORMATION: On January 26, 2016, SBA published a final 
rule implementing changes to the size standards for a number of 
industries in NAICS Sectors 31-33, Manufacturing (81 FR 4469). As 
discussed in the preamble of the rule, SBA intended to amend paragraphs 
(a) and (b) of Footnote 5 to the table of size standards relating to 
NAICS 326211, Tire Manufacturing (except Retreading), by replacing the 
former Census classification codes 30111 and 30112 with the new Census 
Product Classification Codes 3262111 and 3262113. However, the amended 
text inadvertently omitted the new Census Product Classification code 
3262111. This action corrects that omission, but does not affect the 
1,500-employee small business size standard for NAICS 326211.

List of Subjects in 13 CFR Part 121

    Administrative practice and procedure, Government procurement, 
Government property, Grant programs--business, Individuals with 
disabilities, Loan programs--business, Reporting and recordkeeping 
requirements, Small businesses.

    Accordingly, 13 CFR part 121 is corrected by making the following 
correcting amendments:

PART 121--SMALL BUSINESS SIZE REGULATIONS

0
1. The authority citation for part 121 continues to read as follows:

    Authority: 15 U.S.C. 632, 634(b)(6), 662, and 694a(9).


Sec.  121.201  [Amended]

0
2. In Footnote 5 to the table in Sec.  121.201, amend paragraphs (a) 
and (b) by adding the phrase ``3262111 and'' before the number 
``3262113'' each time it appears.

A. John Shoraka,
Associate Administrator for Government Contracting and Business 
Development.
[FR Doc. 2016-30568 Filed 12-20-16; 8:45 am]
BILLING CODE 8205-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.