Endangered and Threatened Species; Take of Anadromous Fish, 87548 [2016-29029]
Download as PDF
<![CDATA[
sradovich on DSK3GMQ082PROD with NOTICES
87548
Federal Register / Vol. 81, No. 233 / Monday, December 5, 2016 / Notices
(6) Alloy forged and rolled steel CTL plate
over 407 mm in actual thickness and meeting
the following requirements:
(a) Made from Electric Arc Furnace melted,
Ladle refined & vacuum degassed, alloy steel
with the following chemical composition
(expressed in weight percentages):
• Carbon 0.23–0.28,
• Silicon 0.05–0.15,
• Manganese 1.20–1.50,
• Nickel not greater than 0.4,
• Sulfur not greater than 0.010,
• Phosphorus not greater than 0.020,
• Chromium 1.20–1.50,
• Molybdenum 0.35–0.55,
• Boron 0.002–0.004,
• Oxygen not greater than 20 ppm,
• Hydrogen not greater than 2 ppm, and
• Nitrogen not greater than 60 ppm;
(b) Having cleanliness in accordance with
ASTM E45 method A (Thin and Heavy): A
not exceeding 1.5, B not exceeding 1.5, C not
exceeding 1.0, D not exceeding 1.5;
(c) Having the following mechanical
properties:
(i) With a Brinell hardness not more than
237 HBW measured in all parts of the
product including mid thickness; and having
a Yield Strength of 75ksi min and UTS 95ksi
or more, Elongation of 18% or more and
Reduction of area 35% or more; having
charpy V at ¥75 degrees F in the
longitudinal direction equal or greater than
15 ft. lbs (single value) and equal or greater
than 20 ft. lbs (average of 3 specimens) and
conforming to the requirements of NACE
MR01–75; or
(ii) With a Brinell hardness not less than
240 HBW measured in all parts of the
product including mid thickness; and having
a Yield Strength of 90 ksi min and UTS 110
ksi or more, Elongation of 15% or more and
Reduction of area 30% or more; having
charpy V at ¥40 degrees F in the
longitudinal direction equal or greater than
21 ft. lbs (single value) and equal or greater
than 31 ft. lbs (average of 3 specimens);
(d) Conforming to ASTM A578–S9
ultrasonic testing requirements with
acceptance criteria 3.2 mm flat bottom hole;
and
(e) Conforming to magnetic particle
inspection in accordance with AMS 2301;
(7) Alloy forged and rolled steel CTL plate
over 407 mm in actual thickness and meeting
the following requirements:
(a) Made from Electric Arc Furnace melted,
ladle refined & vacuum degassed, alloy steel
with the following chemical composition
(expressed in weight percentages):
• Carbon 0.25–0.30,
• Silicon not greater than 0.25,
• Manganese not greater than 0.50,
• Nickel 3.0–3.5,
• Sulfur not greater than 0.010,
• Phosphorus not greater than 0.020,
• Chromium 1.0–1.5,
• Molybdenum 0.6–0.9,
• Vanadium 0.08 to 0.12
• Boron 0.002–0.004,
• Oxygen not greater than 20 ppm,
• Hydrogen not greater than 2 ppm, and
• Nitrogen not greater than 60 ppm.
(b) Having cleanliness in accordance with
ASTM E45 method A (Thin and Heavy): A
VerDate Sep<11>2014
19:12 Dec 02, 2016
Jkt 241001
not exceeding 1.0(t) and 0.5(h), B not
exceeding 1.5(t) and 1.0(h), C not exceeding
1.0(t) and 0.5(h), and D not exceeding 1.5(t)
and 1.0(h);
(c) Having the following mechanical
properties: A Brinell hardness not less than
350 HBW measured in all parts of the
product including mid thickness; and having
a Yield Strength of 145ksi or more and UTS
160ksi or more, Elongation of 15% or more
and Reduction of area 35% or more; having
charpy V at ¥40 degrees F in the transverse
direction equal or greater than 20 ft. lbs
(single value) and equal or greater than 25 ft.
lbs (average of 3 specimens);
(d) Conforming to ASTM A578–S9
ultrasonic testing requirements with
acceptance criteria 3.2 mm flat bottom hole;
and
(e) Conforming to magnetic particle
inspection in accordance with AMS 2301.
The products subject to the investigation
are currently classified in the Harmonized
Tariff Schedule of the United States (HTSUS)
under item numbers: 7208.40.3030,
7208.40.3060, 7208.51.0030, 7208.51.0045,
7208.51.0060, 7208.52.0000, 7211.13.0000,
7211.14.0030, 7211.14.0045, 7225.40.1110,
7225.40.1180, 7225.40.3005, 7225.40.3050,
7226.20.0000, and 7226.91.5000.
The products subject to the investigation
may also enter under the following HTSUS
item numbers: 7208.40.6060, 7208.53.0000,
7208.90.0000, 7210.70.3000, 7210.90.9000,
7211.19.1500, 7211.19.2000, 7211.19.4500,
7211.19.6000, 7211.19.7590, 7211.90.0000,
7212.40.1000, 7212.40.5000, 7212.50.0000,
7214.10.0000, 7214.30.0010, 7214.30.0080,
7214.91.0015, 7214.91.0060, 7214.91.0090,
7225.11.0000, 7225.19.0000, 7225.40.5110,
7225.40.5130, 7225.40.5160, 7225.40.7000,
7225.99.0010, 7225.99.0090, 7226.11.1000,
7226.11.9060, 7226.19.1000, 7226.19.9000,
7226.91.0500, 7226.91.1530, 7226.91.1560,
7226.91.2530, 7226.91.2560, 7226.91.7000,
7226.91.8000, and 7226.99.0180.
The HTSUS subheadings above are
provided for convenience and customs
purposes only. The written description of the
scope of the investigation is dispositive.
[FR Doc. 2016–29071 Filed 12–2–16; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
This notice advises the public
that six direct take permits have been
issued pursuant to section 10(a)(1)(A) of
the Endangered Species Act of 1973
(ESA) for continued operation,
monitoring, and evaluation of hatchery
program rearing and releasing salmon in
Northeast Oregon and Southeast
Washington portions of the Snake River
basin, and associated decision
documents. The permits were issued to
the Oregon Department of Fish and
Wildlife, Washington Department of
Fish and Wildlife, and the Bureau of
Indian Affairs.
DATES: The permits were issued on
October 28, 2016, subject to certain
conditions set forth therein. Subsequent
to issuance, the necessary
countersignatures by the applicants
were received. The permits expire on
December 31, 2027.
ADDRESSES: Requests for copies of the
decision documents or any of the other
associated documents should be
directed to the Sustainable Fisheries
Division, NOAA’s National Marine
Fisheries Service, 1201 NE Lloyd Blvd.,
Suite 1100, Portland, Oregon 97232. The
documents are also available online at
www.westcoast.fisheries.noaa.gov.
FOR FURTHER INFORMATION CONTACT:
Brett Farman, Portland, Oregon, at
phone number: (503) 231–6222, email:
brett.farman@noaa.gov.
SUPPLEMENTARY INFORMATION: This
notice is relevant to the following
species and evolutionarily significant
units (ESUs):
Chinook salmon (Oncorhynchus
tshawytscha): Threatened, naturally
produced and artificially propagated
Snake River spring/summer.
Steelhead (O. mykiss): Threatened,
naturally produced and artificially
propagated Snake River.
SUMMARY:
Dated: November 29, 2016.
Angela Somma,
Chief, Endangered Species Division, Office
of Protected Resources, National Marine
Fisheries Service.
[FR Doc. 2016–29029 Filed 12–2–16; 8:45 am]
BILLING CODE 3510–22–P
RIN 0648–XF055
Endangered and Threatened Species;
Take of Anadromous Fish
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration,
Commerce.
ACTION: Notice of decision and
availability of decision documents on
the issuance of six ESA section
10(a)(1)(A) research/enhancement
permits for take of threatened species.
AGENCY:
PO 00000
Frm 00019
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XF053
Endangered and Threatened Species;
Take of Anadromous Fish
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
AGENCY:
E:\FR\FM\05DEN1.SGM
05DEN1
]]>Agencies
[Federal Register Volume 81, Number 233 (Monday, December 5, 2016)]
[Notices]
[Page 87548]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-29029]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric Administration
RIN 0648-XF055
Endangered and Threatened Species; Take of Anadromous Fish
AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and
Atmospheric Administration, Commerce.
ACTION: Notice of decision and availability of decision documents on
the issuance of six ESA section 10(a)(1)(A) research/enhancement
permits for take of threatened species.
-----------------------------------------------------------------------
SUMMARY: This notice advises the public that six direct take permits
have been issued pursuant to section 10(a)(1)(A) of the Endangered
Species Act of 1973 (ESA) for continued operation, monitoring, and
evaluation of hatchery program rearing and releasing salmon in
Northeast Oregon and Southeast Washington portions of the Snake River
basin, and associated decision documents. The permits were issued to
the Oregon Department of Fish and Wildlife, Washington Department of
Fish and Wildlife, and the Bureau of Indian Affairs.
DATES: The permits were issued on October 28, 2016, subject to certain
conditions set forth therein. Subsequent to issuance, the necessary
countersignatures by the applicants were received. The permits expire
on December 31, 2027.
ADDRESSES: Requests for copies of the decision documents or any of the
other associated documents should be directed to the Sustainable
Fisheries Division, NOAA's National Marine Fisheries Service, 1201 NE
Lloyd Blvd., Suite 1100, Portland, Oregon 97232. The documents are also
available online at www.westcoast.fisheries.noaa.gov.
FOR FURTHER INFORMATION CONTACT: Brett Farman, Portland, Oregon, at
phone number: (503) 231-6222, email: brett.farman@noaa.gov.
SUPPLEMENTARY INFORMATION: This notice is relevant to the following
species and evolutionarily significant units (ESUs):
Chinook salmon (Oncorhynchus tshawytscha): Threatened, naturally
produced and artificially propagated Snake River spring/summer.
Steelhead (O. mykiss): Threatened, naturally produced and
artificially propagated Snake River.
Dated: November 29, 2016.
Angela Somma,
Chief, Endangered Species Division, Office of Protected Resources,
National Marine Fisheries Service.
[FR Doc. 2016-29029 Filed 12-2-16; 8:45 am]
BILLING CODE 3510-22-P
