Certain New Chemicals; Receipt and Status Information for October 2016, 85556-85559 [2016-28568]

Download as PDF 85556 Federal Register / Vol. 81, No. 228 / Monday, November 28, 2016 / Notices Online service, please email FERCOnlineSupport@ferc.gov. or call (866) 208–3676 (toll free). For TTY, call (202) 502–8659. Dated: November 21, 2016. Nathaniel J. Davis, Sr., Deputy Secretary. [FR Doc. 2016–28463 Filed 11–25–16; 8:45 am] BILLING CODE 6717–01–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OPPT–2016–0485; FRL–9955–35] Certain New Chemicals; Receipt and Status Information for October 2016 SUPPLEMENTARY INFORMATION: Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: mstockstill on DSK3G9T082PROD with NOTICES I. General Information A. Does this action apply to me? EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from October 3, 2016 to October 31, 2016. DATES: Comments identified by the specific case number provided in this document, must be received on or before December 28, 2016. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA–HQ–OPPT–2016–0485, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: https:// www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001. • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at https:// www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, SUMMARY: VerDate Sep<11>2014 21:15 Nov 25, 2016 Jkt 241001 along with more information about dockets generally, is available at https:// www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001; telephone number: 202–564–8593; email address: rahai.jim@epa.gov. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554– 1404; email address: TSCA-Hotline@ epa.gov. This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD–ROM that you mail to EPA, mark the outside of the disk or CD–ROM as CBI and then identify electronically within the disk or CD–ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at https://www.epa.gov/dockets/ comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from October 3, 2016 to October 31, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received PO 00000 Frm 00049 Fmt 4703 Sfmt 4703 under TSCA section 5 during this time period. III. What is the Agency’s authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ‘‘existing’’ chemical or a ‘‘new’’ chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a ‘‘new chemical,’’ while those that are on the TSCA Inventory are classified as an ‘‘existing chemical.’’ For more information about the TSCA Inventory, please go to: https://www.epa.gov/ opptintr/newchems/pubs/ inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ‘‘test marketing’’ purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 36 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA’s review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. E:\FR\FM\28NON1.SGM 28NON1 Federal Register / Vol. 81, No. 228 / Monday, November 28, 2016 / Notices 85557 TABLE 1—PMNS RECEIVED FROM OCTOBER 3, 2016 TO OCTOBER 31, 2016 Projected notice end date Received date P–16–0180 .... 10/11/2016 1/9/2017 CBI ............................... (S) Component Of Industrial And Maintenance Coatings. P–16–0271 .... 10/27/2016 1/25/2017 Oxea Corporation ......... P–16–0308 .... 10/21/2016 1/19/2017 Itaconix Corp ................ (S) Flexible Pvc Plasticizer For Wire Insulation. (G) Reactive Monomer P–16–0330 .... 10/6/2016 1/4/2017 H.B. Fuller Company ... (G) Industrial Adhesive P–16–0331 .... 10/6/2016 1/4/2017 H.B. Fuller Company ... (G) Industrial Adhesive P–16–0336 .... 10/25/2016 1/23/2017 CBI ............................... P–16–0363 .... 10/24/2016 1/22/2017 CBI ............................... P–16–0372 .... 10/5/2016 1/3/2017 CBI ............................... P–16–0427 .... 10/3/2016 1/1/2017 CBI ............................... (G) Fuel Additive—Destructive Use. (G) Open, Non-Dispersive. (G) Wetting And Dispersing Additive. (G) Adhesive ................ P–16–0509 .... 10/20/2016 1/18/2017 CBI ............................... P–16–0541 .... 10/6/2016 1/4/2017 Specialty Organics, Inc P–16–0578 .... 10/21/2016 1/19/2017 CBI ............................... P–16–0582 .... 10/25/2016 1/23/2017 CBI ............................... P–16–0583 .... 10/14/2016 1/12/2017 CBI ............................... P–16–0591 .... 10/4/2016 1/2/2017 CBI ............................... P–16–0597 .... 10/25/2016 1/23/2017 CBI ............................... P–16–0601 .... 10/5/2016 1/3/2017 CBI ............................... P–17–0001 .... mstockstill on DSK3G9T082PROD with NOTICES Case No. 10/5/2016 1/3/2017 CBI ............................... P–17–0002 .... 10/24/2016 1/22/2017 CBI ............................... P–17–0003 .... 10/24/2016 1/22/2017 CBI ............................... P–17–0007 .... 10/18/2016 1/16/2017 CBI ............................... P–17–0009 .... 10/13/2016 1/11/2017 CBI ............................... 21:15 Nov 25, 2016 Jkt 241001 VerDate Sep<11>2014 Manufacturer importer PO 00000 Frm 00050 Use (G) For Packaging Application. (S) Adhesive For Wood Particle/Chip/Fiberboard. (G) Reactive Polymer For Waterborne Coating Applications. (S) Lubricity Additive For Industrial Oils And Other Lubricants; (S) Lubricity Additive For Automotive Engine Oil. (S) Sealant For Head Lamps Of Cars. (G) Component Of Colorants; (G) Component Of Printing Ink. (G) Component Of Inkjet Printer Ink. (S) Export; (S) Active Component In Cross Linking Agent (Metal Passivator). (G) Colorant Additive ... (G) Printing Ink Applications. (G) Printing Ink Applications. (S) Intermediate ........... (S) Intermediate For Use In The Manufacture Of Polymers. Fmt 4703 Sfmt 4703 Chemical (G) Isocyanic acid, polymethylenepolyphenyl ene ester, polymer with a-hydro-w0;hydroxypoly[oxy(methyl-1,2-ethanediyl)] and alkylene oxide polymer, alkylamine initiated. (S) 1,2,4-benzenetricarboxylic acid, 1,2,4trinonyl ester. (S) Butanedioic acid, 2-methylene-, 1,4-bis (2methylpropyl) ester. (G) Hydroxy functional triglyceride polymer with glycerol mono-ester and 1,1′-methylenebis[4isocyanatobenzene]. (G) Hydroxy functional triglyceride polymer with glycerol mono-ester and 1,1′-methylenebis [isocyanatobenzene]. (G) Polyolefin ester. (G) Blocked polyester polyurethane, neutralized. (G) Polyester phosphate alkyl alkyl esters. (G) Alkanedioic acid polymer with ethenylbenzene alky-2-alkenoate, alkanediol, ˜ ˆ ˜ ˆ ˜ ˆ .alpha. a¿a—a¿a a;¿a;¡-hydro-.omega.hydroxypoly[oxyalkyl-alkanediyl)], hydroxyalkyl-alkyl-alkenoate, and aromatic isocyanate. (G) Modified ethylene-vinyl alcohol copolymer. (S) Soybean meal, reaction products with phosphoric trichloride. (G) Alkenoic acid, alkyester, polymer with n(dialkyl-oxoalkyl)-alkenamide, alkenylbenzene, alkyl alkenoate and alkenoic acid. (G) Carboxylic acids, polyalkyl unsaturated, oligomers, polymers with substituted alkyl alkenol and alkylpolyol. (G) Aromatic hydrocarbon resin. (G) Alkyl bis-phenol. (G) Substituted carbopolycyclic disulfonic acid, substituted disulfocarbomonocycle diazenylsubstituted sulfocarbomonocycle diazenyl, alkali metal salt. (G) Antimony based compound. (G) 2,5-furandione, telomer with ethenylbenzene and (1-methylethyl)benzene, reaction products with polyethylene-polypropylene glycol alkyl amino ether. (G) Styrene(ated) copolymer with alkyl(meth)acrylate, and (meth)acrylic acid. (G) Styrene(ated) copolymer with alkyl(meth)acrylate, and (meth)acrylic acid. (G) Alkyl substituted-dioxa thio substituted-ether diene. (G) Depolymerized waste plastics. E:\FR\FM\28NON1.SGM 28NON1 85558 Federal Register / Vol. 81, No. 228 / Monday, November 28, 2016 / Notices TABLE 1—PMNS RECEIVED FROM OCTOBER 3, 2016 TO OCTOBER 31, 2016—Continued Case No. P–17–0010 .... 10/14/2016 P–17–0011 .... Projected notice end date Received date Manufacturer importer Use Chemical 1/12/2017 Allnex Usa Inc .............. (S) Uv Curable Coating Resin. 10/18/2016 1/16/2017 Colonial Chemical, Inc P–17–0015 .... 10/24/2016 1/22/2017 CBI ............................... P–17–0016 .... 10/27/2016 1/25/2017 CBI ............................... (S) Creams And Lotions. (G) Precursor For Photochromic Substance. (G) Polymer For Coatings. (G) Alkyl substituted alkenoic acid, alkyl ester, polymer with alkyl substituted alkenoate and alkenoic acid, hydroxy substituted[(oxoalkyl) oxy]alkyl ester, reaction products with alkanoic acid, dipentaerythritol and isocyanate substituted carbomonocycle, compds. with alkylamine. (S) Octadecanoic acid, ester with 2,2′,2″nitrilotris[ethanol]. (G) Heteromonocycle ester with alkanediol. P–17–0017 .... 10/27/2016 1/25/2017 CBI ............................... (G) Polymer For Coatings. P–17–0018 .... 10/27/2016 1/25/2017 CBI ............................... (G) Polymer For Coatings. P–17–0019 .... 10/27/2016 1/25/2017 CBI ............................... (G) Polymer For Coatings. P–17–0020 .... 10/27/2016 1/25/2017 CBI ............................... (G) Polymer For Coatings. P–17–0021 .... 10/27/2016 1/25/2017 CBI ............................... (G) Polymer For Coatings. P–17–0022 .... 10/26/2016 1/24/2017 Miwon North America, Inc. P–17–0023 .... 10/26/2016 1/24/2017 CBI ............................... P–17–0024 .... 10/26/2016 1/24/2017 CBI ............................... (S) Reactive Diluent For Optical Film Coating. (S) An Additive In Customized Electrolyte Formulations For Lithium Ion Batteries. (G) Urethane Component. P–17–0025 .... 10/26/2016 1/24/2017 CBI ............................... (G) Urethane Component. P–17–0026 .... 10/26/2016 1/24/2017 CBI ............................... (G) Industrial Ink Printing Applications. mstockstill on DSK3G9T082PROD with NOTICES For the 12 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated. (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromaticvinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated. (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphaticlactone, and alkyl carboxylic acid, azobis[aliphatic nitrile] initiated. (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated. (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated. (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, azobis[aliphatic nitrile] initiated. (G) 2-propenoic acid, mixed esters with heterocyclic dimethanol and heterocyclic methanol. (S) 1,3,2-dioxathiolane, 2,2-dioxide. (G) Aromatic isocyanate, polymer with alkyloxirane polymer with oxirane ether with alkyldiol (2:1), and alkyloxirane polymer with oxirane ether with alkyltrioll (3:1). (G) Aromatic isocyanate polymer with alkyloxirane, alkyloxirane polymer with oxirane ether with alkanetriol and oxirane. (G) Cycloaliphatic diamine, polymer with .alphahydro-.omega.-hydroxypoly(oxy-alkanediyl), .alpha-hydro-.omega.-hydroxypoly(oxyalkanediyl), and cycloaliphatic diisocyanate. submitter in the NOC; and the chemical identity. TABLE 2—NOCS RECEIVED FROM OCTOBER 3, 2016 TO OCTOBER 31, 2016 Case No. Received date J–16–0010 ............. P–13–0239 ............. VerDate Sep<11>2014 10/21/2016 10/12/2016 21:15 Nov 25, 2016 Jkt 241001 Commencement date 9/23/2016 4/15/2014 PO 00000 Chemical (G) Genetically modified saccharomyces yeast. (G) Substituted cycloalkanemethanamine with [(morpholinyl)propylidene]. Frm 00051 Fmt 4703 Sfmt 4703 E:\FR\FM\28NON1.SGM 28NON1 Federal Register / Vol. 81, No. 228 / Monday, November 28, 2016 / Notices 85559 TABLE 2—NOCS RECEIVED FROM OCTOBER 3, 2016 TO OCTOBER 31, 2016—Continued Case No. P–14–0098 P–14–0712 P–15–0524 P–16–0001 Received date Commencement date ............. ............. ............. ............. 10/18/2016 10/19/2016 10/27/2016 10/13/2016 10/15/2016 9/26/2016 10/2/2016 9/25/2016 P–16–0170 ............. P–16–0181 ............. P–16–0182 ............. 10/3/2016 10/11/2016 10/15/2016 9/30/2016 7/22/2016 10/12/2016 P–16–0240 ............. 10/6/2016 9/29/2016 P–16–0268 ............. 10/26/2016 10/19/2016 P–16–0391 ............. 10/10/2016 10/3/2016 Authority: 15 U.S.C. 2601 et seq. Dated: November 17, 2016. Pamela Myrick, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2016–28568 Filed 11–25–16; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OAR–2003–0120; FRL–9955–70– OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Reporting and Recordkeeping Requirements for National Volatile Organic Compound Emission Standards for Automobile Refinish Coatings Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency (EPA) has submitted an information collection request (ICR), ‘‘Reporting and Recordkeeping Requirements for National Volatile Organic Compound Emission Standards for Automobile Refinish Coatings’’ (EPA ICR No. 1765.08, OMB Control No. 2060–0353) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of the ICR, which is currently approved through November 30, 2016. Public comments were previously requested via the Federal Register (81 mstockstill on DSK3G9T082PROD with NOTICES SUMMARY: VerDate Sep<11>2014 21:15 Nov 25, 2016 Jkt 241001 Chemical (G) Polyalkylene polymer, anhydride reaction products, imidated. (S) Waste plastics, pyrolyzed, c5–55 fraction. (S) Benzamide, 2-amino-5-cyano-n,3-dimethyl-. (G) Poly[oxy(alkanediyl)],.alpha.,.alpha.′,.alpha.″-1,2,3-propanetriyltris[.omega.-(2hydroxy-3-mercaptopropoxy)-. (S) Carbon nanotubes. (S) 2-butenoic acid, 3-amino-, 1,1′-(thiodi-2,1-ethanediyl) ester. (S) Manganese, tris[-(2-ethylhexanoato-o:o′)]bis(octahydro-1,4,7-trimethyl-1h-1,4,7triazonine-n1,n4,n7)manganese, [-(acetato-o:o′)]bis[-(2-ethylhexanoatoo:o′)]bis(octahydro-1,4,7-trimethyl-1h-1,4,7-triazonine- n1,n4,n7)- manganese, bis[-(acetato-o:o′)][-(2-ethylhexanoato-o:o′)]bis(octahydro-1,4,7-trimethyl-1h1,4,7-triazonine-n1,n4,n7)- manganese, tris[-(acetato-o:o′)]bis(octahydro-1,4,7trimethyl-1h-1,4,7-triazonine-n1,n4,n7)-. (G) Styrene(ated) copolymer with alkylmethacrylate, hydroxyalkylacrylate and acrylic acid. (S) Fatty acids, c18-unsaturated, dimers, hydrogenated, polymers with n-[3(dimethylamino)propyl] coco amides, n1,n1-dimethyl-1,3-dipropanediamine and epichlorohydrin. (G) Polyester polyol polymer with aliphatic isocyanate and phenol derivatives. FR 31629) on May 19, 2016, during a 60day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number. DATES: Additional comments may be submitted on or before December 28, 2016. ADDRESSES: Submit your comments, referencing Docket ID No. EPA–HQ– OAR–2003–0120, to (1) the EPA online using www.regulations.gov (our preferred method), by email to a-and-rdocket@epa.gov, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460, and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA. The EPA’s policy is that all comments received will be included in the public docket without change, including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Ms. Kim Teal, Office of Air and Radiation, Office of Air Quality Planning and Standards, Mail Code D243–04, Research Triangle Park, North Carolina 27711; telephone number: (919) 541– 5580; fax number: (919) 541–5450; email address: teal.kim@epa.gov. PO 00000 Frm 00052 Fmt 4703 Sfmt 4703 SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, EPA WJC West Building, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202–566–1744. For additional information about the EPA’s public docket, visit https:// www.epa.gov/dockets. Abstract: The EPA is required under section 183(e) of the Clean Air Act (CAA) to regulate volatile organic compound emissions from the use of consumer and commercial products. Pursuant to CAA section 183(e)(3), the EPA published a list of consumer and commercial products and a schedule for their regulation (60 FR 15264). Automobile refinish coatings were included on the list, and the standards for such coatings are codified at 40 CFR part 59, subpart B. The reports required under the standards enable the EPA to identify all coating and coating component manufacturers and importers in the United States and to determine which coatings and coating components are subject to the standards, based on dates of manufacture. Form Numbers: None. Respondents/affected entities: Entities potentially affected by this action as respondents are manufacturers and importers of automobile refinish coatings and coating components. Respondent’s obligation to respond: Mandatory, 40 CFR part 59 subpart B. Estimated number of respondents: 30 (total). Frequency of response: Annually. E:\FR\FM\28NON1.SGM 28NON1

Agencies

ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 81, Number 228 (Monday, November 28, 2016)]
[Notices]
[Pages 85556-85559]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-28568]

=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2016-0485; FRL-9955-35]

Certain New Chemicals; Receipt and Status Information for October
2016

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from October 3, 2016 to October 31, 2016.

DATES: Comments identified by the specific case number provided in this
document, must be received on or before December 28, 2016.

ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0485, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
202-564-8593; email address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.

II. What action is the Agency taking?

This document provides receipt and status reports, which cover the
period from October 3, 2016 to October 31, 2016, and consists of the
PMNs and TMEs both pending and/or expired, and the NOCs to manufacture
a new chemical that the Agency has received under TSCA section 5 during
this time period.

III. What is the Agency's authority for taking this action?

Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory, please go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.

IV. Receipt and Status Reports

As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 36 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; The
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.

[[Page 85557]]

Table 1--PMNs Received From October 3, 2016 to October 31, 2016
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received notice end Manufacturer Use Chemical
date date importer
----------------------------------------------------------------------------------------------------------------
P-16-0180.................... 10/11/2016 1/9/2017 CBI............. (S) Component Of (G) Isocyanic acid,
Industrial And polymethylenepolyphe
Maintenance nylene ester,
Coatings. polymer with a-hydro-
w-
0;hydroxypoly[oxy(me
thyl-1,2-
ethanediyl)] and
alkylene oxide
polymer, alkylamine
initiated.
P-16-0271.................... 10/27/2016 1/25/2017 Oxea Corporation (S) Flexible Pvc (S) 1,2,4-
Plasticizer For benzenetricarboxylic
Wire Insulation. acid, 1,2,4-trinonyl
ester.
P-16-0308.................... 10/21/2016 1/19/2017 Itaconix Corp... (G) Reactive (S) Butanedioic acid,
Monomer. 2-methylene-, 1,4-
bis (2-methylpropyl)
ester.
P-16-0330.................... 10/6/2016 1/4/2017 H.B. Fuller (G) Industrial (G) Hydroxy
Company. Adhesive. functional
triglyceride polymer
with glycerol mono-
ester and 1,1'-
methylenebis[4-
isocyanatobenzene].
P-16-0331.................... 10/6/2016 1/4/2017 H.B. Fuller (G) Industrial (G) Hydroxy
Company. Adhesive. functional
triglyceride polymer
with glycerol mono-
ester and 1,1'-
methylenebis[isocyan
atobenzene].
P-16-0336.................... 10/25/2016 1/23/2017 CBI............. (G) Fuel (G) Polyolefin ester.
Additive--Destr
uctive Use.
P-16-0363.................... 10/24/2016 1/22/2017 CBI............. (G) Open, Non- (G) Blocked polyester
Dispersive. polyurethane,
neutralized.
P-16-0372.................... 10/5/2016 1/3/2017 CBI............. (G) Wetting And (G) Polyester
Dispersing phosphate alkyl
Additive. alkyl esters.
P-16-0427.................... 10/3/2016 1/1/2017 CBI............. (G) Adhesive.... (G) Alkanedioic acid
polymer with
ethenylbenzene alky-
2-alkenoate,
alkanediol, .alpha.
[atilde][iquest][aci
rc]_[atilde][iquest]
[acirc]
[atilde];[iquest][ac
irc];[iexcl]-hydro-
.omega.-
hydroxypoly[oxyalkyl-
alkanediyl)],
hydroxyalkyl-alkyl-
alkenoate, and
aromatic isocyanate.
P-16-0509.................... 10/20/2016 1/18/2017 CBI............. (G) For (G) Modified ethylene-
Packaging vinyl alcohol
Application. copolymer.
P-16-0541.................... 10/6/2016 1/4/2017 Specialty (S) Adhesive For (S) Soybean meal,
Organics, Inc. Wood Particle/ reaction products
Chip/Fiberboard. with phosphoric
trichloride.
P-16-0578.................... 10/21/2016 1/19/2017 CBI............. (G) Reactive (G) Alkenoic acid,
Polymer For alkyester, polymer
Waterborne with n-(dialkyl-
Coating oxoalkyl)-
Applications. alkenamide,
alkenylbenzene,
alkyl alkenoate and
alkenoic acid.
P-16-0582.................... 10/25/2016 1/23/2017 CBI............. (S) Lubricity (G) Carboxylic acids,
Additive For polyalkyl
Industrial Oils unsaturated,
And Other oligomers, polymers
Lubricants; (S) with substituted
Lubricity alkyl alkenol and
Additive For alkylpolyol.
Automotive
Engine Oil.
P-16-0583.................... 10/14/2016 1/12/2017 CBI............. (S) Sealant For (G) Aromatic
Head Lamps Of hydrocarbon resin.
Cars.
P-16-0591.................... 10/4/2016 1/2/2017 CBI............. (G) Component Of (G) Alkyl bis-phenol.
Colorants; (G)
Component Of
Printing Ink.
P-16-0597.................... 10/25/2016 1/23/2017 CBI............. (G) Component Of (G) Substituted
Inkjet Printer carbopolycyclic
Ink. disulfonic acid,
substituted
disulfocarbomonocycl
e diazenyl-
substituted
sulfocarbomonocycle
diazenyl, alkali
metal salt.
P-16-0601.................... 10/5/2016 1/3/2017 CBI............. (S) Export; (S) (G) Antimony based
Active compound.
Component In
Cross Linking
Agent (Metal
Passivator).
P-17-0001.................... 10/5/2016 1/3/2017 CBI............. (G) Colorant (G) 2,5-furandione,
Additive. telomer with
ethenylbenzene and
(1-
methylethyl)benzene,
reaction products
with polyethylene-
polypropylene glycol
alkyl amino ether.
P-17-0002.................... 10/24/2016 1/22/2017 CBI............. (G) Printing Ink (G) Styrene(ated)
Applications. copolymer with
alkyl(meth)acrylate,
and (meth)acrylic
acid.
P-17-0003.................... 10/24/2016 1/22/2017 CBI............. (G) Printing Ink (G) Styrene(ated)
Applications. copolymer with
alkyl(meth)acrylate,
and (meth)acrylic
acid.
P-17-0007.................... 10/18/2016 1/16/2017 CBI............. (S) Intermediate (G) Alkyl substituted-
dioxa thio
substituted-ether
diene.
P-17-0009.................... 10/13/2016 1/11/2017 CBI............. (S) Intermediate (G) Depolymerized
For Use In The waste plastics.
Manufacture Of
Polymers.

[[Page 85558]]

P-17-0010.................... 10/14/2016 1/12/2017 Allnex Usa Inc.. (S) Uv Curable (G) Alkyl substituted
Coating Resin. alkenoic acid, alkyl
ester, polymer with
alkyl substituted
alkenoate and
alkenoic acid,
hydroxy
substituted[(oxoalky
l)oxy]alkyl ester,
reaction products
with alkanoic acid,
dipentaerythritol
and isocyanate
substituted
carbomonocycle,
compds. with
alkylamine.
P-17-0011.................... 10/18/2016 1/16/2017 Colonial (S) Creams And (S) Octadecanoic
Chemical, Inc. Lotions. acid, ester with
2,2',2''-
nitrilotris[ethanol]
.
P-17-0015.................... 10/24/2016 1/22/2017 CBI............. (G) Precursor (G) Heteromonocycle
For ester with
Photochromic alkanediol.
Substance.
P-17-0016.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates, aromatic
vinyl monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide initiated.
P-17-0017.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates,
aromaticvinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide initiated.
P-17-0018.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates, aromatic
vinyl monomer,
cycloaliphaticlacton
e, and alkyl
carboxylic acid,
azobis[aliphatic
nitrile] initiated.
P-17-0019.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates, aromatic
vinyl monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide initiated.
P-17-0020.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates, aromatic
vinyl monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide initiated.
P-17-0021.................... 10/27/2016 1/25/2017 CBI............. (G) Polymer For (G) Hydroxyl alkyl
Coatings. acrylate ester,
polymer with
acrylates, aromatic
vinyl monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
azobis[aliphatic
nitrile] initiated.
P-17-0022.................... 10/26/2016 1/24/2017 Miwon North (S) Reactive (G) 2-propenoic acid,
America, Inc. Diluent For mixed esters with
Optical Film heterocyclic
Coating. dimethanol and
heterocyclic
methanol.
P-17-0023.................... 10/26/2016 1/24/2017 CBI............. (S) An Additive (S) 1,3,2-
In Customized dioxathiolane, 2,2-
Electrolyte dioxide.
Formulations
For Lithium Ion
Batteries.
P-17-0024.................... 10/26/2016 1/24/2017 CBI............. (G) Urethane (G) Aromatic
Component. isocyanate, polymer
with alkyloxirane
polymer with oxirane
ether with alkyldiol
(2:1), and
alkyloxirane polymer
with oxirane ether
with alkyltrioll
(3:1).
P-17-0025.................... 10/26/2016 1/24/2017 CBI............. (G) Urethane (G) Aromatic
Component. isocyanate polymer
with alkyloxirane,
alkyloxirane polymer
with oxirane ether
with alkanetriol and
oxirane.
P-17-0026.................... 10/26/2016 1/24/2017 CBI............. (G) Industrial (G) Cycloaliphatic
Ink Printing diamine, polymer
Applications. with .alpha-hydro-
.omega.-
hydroxypoly(oxy-
alkanediyl), .alpha-
hydro-.omega.-
hydroxypoly(oxy-
alkanediyl), and
cycloaliphatic
diisocyanate.
----------------------------------------------------------------------------------------------------------------

For the 12 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.

Table 2--NOCs Received From October 3, 2016 to October 31, 2016
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date Chemical
----------------------------------------------------------------------------------------------------------------
J-16-0010.............................. 10/21/2016 9/23/2016 (G) Genetically modified
saccharomyces yeast.
P-13-0239.............................. 10/12/2016 4/15/2014 (G) Substituted
cycloalkanemethanamine with
[(morpholinyl)propylidene].

[[Page 85559]]

P-14-0098.............................. 10/18/2016 10/15/2016 (G) Polyalkylene polymer, anhydride
reaction products, imidated.
P-14-0712.............................. 10/19/2016 9/26/2016 (S) Waste plastics, pyrolyzed, c5-
55 fraction.
P-15-0524.............................. 10/27/2016 10/2/2016 (S) Benzamide, 2-amino-5-cyano-n,3-
dimethyl-.
P-16-0001.............................. 10/13/2016 9/25/2016 (G)
Poly[oxy(alkanediyl)],.alpha.,.alp
ha.',.alpha.''-1,2,3-
propanetriyltris[.omega.-(2-
hydroxy-3-mercaptopropoxy)-.
P-16-0170.............................. 10/3/2016 9/30/2016 (S) Carbon nanotubes.
P-16-0181.............................. 10/11/2016 7/22/2016 (S) 2-butenoic acid, 3-amino-, 1,1'-
(thiodi-2,1-ethanediyl) ester.
P-16-0182.............................. 10/15/2016 10/12/2016 (S) Manganese, tris[-(2-
ethylhexanoato-o:o')]bis(octahydro-
1,4,7-trimethyl-1h-1,4,7-
triazonine-n1,n4,n7)- manganese, [-
(acetato-o:o')]bis[-(2-
ethylhexanoato-o:o')]bis(octahydro-
1,4,7-trimethyl-1h-1,4,7-
triazonine- n1,n4,n7)- manganese,
bis[-(acetato-o:o')][-(2-
ethylhexanoato-o:o')]bis(octahydro-
1,4,7-trimethyl-1h-1,4,7-
triazonine-n1,n4,n7)- manganese,
tris[-(acetato-o:o')]bis(octahydro-
1,4,7-trimethyl-1h-1,4,7-
triazonine-n1,n4,n7)-.
P-16-0240.............................. 10/6/2016 9/29/2016 (G) Styrene(ated) copolymer with
alkylmethacrylate,
hydroxyalkylacrylate and acrylic
acid.
P-16-0268.............................. 10/26/2016 10/19/2016 (S) Fatty acids, c18-unsaturated,
dimers, hydrogenated, polymers
with n-[3-(dimethylamino)propyl]
coco amides, n1,n1-dimethyl-1,3-
dipropanediamine and
epichlorohydrin.
P-16-0391.............................. 10/10/2016 10/3/2016 (G) Polyester polyol polymer with
aliphatic isocyanate and phenol
derivatives.
----------------------------------------------------------------------------------------------------------------

Authority: 15 U.S.C. 2601 et seq.

Dated: November 17, 2016.
Pamela Myrick,
Information Management Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2016-28568 Filed 11-25-16; 8:45 am]
BILLING CODE 6560-50-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.