Certain New Chemicals; Receipt and Status Information for June 2016, 74784-74798 [2016-26021]
Download as PDF
74784
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2016–0082; FRL–9952–62]
Certain New Chemicals; Receipt and
Status Information for June 2016
I. General Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a Premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from June
22, 2016 to June 30, 2016.
DATES: Comments identified by the
specific case number provided in this
document, must be received on or
before November 28, 2016.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2016–0025,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
sradovich on DSK3GMQ082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the agency taking?
This document provides receipt and
status reports, which cover the period
from June 22, 2016 to June 30, 2016, and
consists of the PMNs and TMEs both
pending and/or expired, and the NOCs
to manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
President Obama signed new TSCA
legislation on June 22, 2016. TSCA
subsection 5(a) notices, which were
submitted prior to signature of the law,
but were still within the review period
on June 22 (i.e., typically the 90-day
review period), will have
determinations made in accordance
with the new law. EPA views all section
5(a) notices that were within the notice
period, as of June 22, 2016, as having
been refiled on that date, thereby
restarting the 90-day review clock on
June 22, 2016. This follows from the
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
manner in which the TSCA legislation
defines the ‘‘applicable review period,’’
a statutory phrase that did not exist
before the amendments to TSCA. New
TSCA section 5(i)(3) states that the
applicable review period ‘‘means the
period starting on the date the
Administrator receives a notice under
subsection (a)(1).’’ EPA interprets this
cross-reference as a reference to TSCA
subsection (a)(1), as amended. Thus, in
the case of a notice submitted prior to
the date of enactment, the earliest
possible date on which that notice could
be viewed as submitted ‘‘under
subsection (a)(1),’’ is June 22, 2016, the
first date on which that subsection was
in legal effect.
III. What is the agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a notice before initiating the
activity. TSCA furthermore prohibits
such manufacturing or processing from
commencing until EPA has conducted a
review of the notice, made an
appropriate determination on the notice,
and taken such actions as are required
in association with that determination
(15 U.S.C. 2604(a)(1)(B)(ii)). Section
5(h)(1) of TSCA authorizes EPA to allow
persons, upon application, to
manufacture (includes import) or
process a new chemical substance, or a
chemical substance subject to a
significant new use rule (SNUR) issued
under TSCA section 5(a), for ‘‘test
marketing’’ purposes, which is referred
to as a test marketing exemption, or
TME. For more information about the
requirements applicable to a new
chemical go to: https://www.epa.gov/
oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
E:\FR\FM\27OCN1.SGM
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 349 PMNs received by EPA
during this period, the table provides
the following information (to the extent
that such information is not claimed as
CBI): The EPA case number assigned to
74785
the PMN; the date the PMN was
received by EPA; the projected end date
for EPA’s review of the PMN; the
submitting manufacturer/importer; the
potential uses identified by the
manufacturer/importer in the PMN; and
the chemical identity.
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
(G) Solvent ......................................................
(S) This substance will be a raw material for
a flame retardant product used in the plastics.
(G) Sealant application ...................................
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Santolubes, LLC ........
P–10–0017 ....
6/22/2016
9/19/2016
CBC (America) Corporation.
P–10–0494 ....
P–10–0542 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–11–0148 ....
6/22/2016
9/19/2016
Ineos Oligomers .........
(G) Intermediate chemical product .................
(G) Used as an ingredient in manufacture of
a polymer binder meant to adhere glass fibers together.
(G) Industrial applications ...............................
P–11–0593 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of polyurethane foam ............
P–11–0647 ....
6/22/2016
9/19/2016
CBI .............................
(G) Water and oil repellent .............................
P–12–0085 ....
6/22/2016
9/19/2016
CBI .............................
(G) Finishing agent for textile .........................
P–12–0089 ....
6/22/2016
9/19/2016
BrueggeMann Chemical U.S., Inc.
P–12–0277 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0278 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0279 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0280 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0281 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0282 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0283 ....
6/22/2016
9/19/2016
CBI .............................
P–12–0284 ....
P–12–0291 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Zinc is a natural essential element, which
is needed for the optimal growth and development of all living organisms including
man all living organisms have homeostasis
mechanisms that actively regulate zinc uptake and absorption excretion from the
body due to this regulations zinc and zinc
compounds do not bioaccumulate or biomagnify most common technical function of
substance (what it does) food/feedstuff additives process regulators other than
polymerisation or vulcanisation processes
lubricants and lubricant additives laboratory
chemicals ph-regulating agents fertilizers.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Platicizer and lubricant with flame retardant properties.
(G) Metal working fluid additive ......................
(G) Additive, open, non-dispersive use ..........
P–12–0399 ....
6/22/2016
9/19/2016
CBI .............................
(G) Paper treatment ........................................
P–12–0433
P–12–0453
P–12–0505
P–13–0021
sradovich on DSK3GMQ082PROD with NOTICES
P–09–0378 ....
P–09–0629 ....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
Ineos Chlor Americas
Ineos Chlor Americas
Ineos Chlor Americas
CBI .............................
P–13–0022 ....
6/22/2016
9/19/2016
CBI .............................
P–13–0287 ....
6/22/2016
9/19/2016
CBI .............................
P–13–0307 ....
6/22/2016
9/19/2016
CBI .............................
(G) Additive .....................................................
(G) Additive .....................................................
(G) Additive .....................................................
(S) Surface protection agent for use in building materials.
(S) Surface protection agent for use in building materials.
(G) Curing agent; starting material for curing
agent.
(G) Component of manufactured consumer
article—contained use.
P–13–0323 ....
6/22/2016
9/19/2016
CBI .............................
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00024
(G) Additive for foam applications ..................
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Hydrofluorocarbon.
(S) Bis(para-phenoxyphenyl)ether.
(S) Phenol, 4,4′-(1-methylethylidene)bis-,
polymer with 2-(chloromethyl)oxirane, hydrogenated.
(G) Polyphenol ether.
(G) Amide, polyprotic acid.
(S) Hydrocarbons, c4, 1,3-butadiene-free,
polymd., triisobutylene fraction, hydrogenated.
(G) Formaldehydem reaction products with
alkylphenol and diethanolamine, alkoxy
alkylated.
(G) Perfluoroalkylethyl methacrylate copolymer.
(G) Substituted-dioxaphosphorinane, 2-([1,1′biphenyl]-2-yloxy)-5,5-dialkyl-, 2-oxide.
(S) Carbonic acid, zinc salt, basic.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Chloro alkanes.
(G) Fluoroalkyl modified
polydimethylsiloxane.
(G) Perfluoroalkylethyl methacrylate copolymer, sodium salt.
(S) Alkanes, c18-20, chloro.
(S) Alkanes, c14-17, chloro.
(S) Alkanes, c22-30, chloro.
(G) Perfluoroacrylate polymer.
(G) Perfluoroacrylate polymer.
(G) Cyanoethylated diamine.
(G) Substituted carbocycle, n-[[[4-[[(4-substituted carbocyclic)amino]sulf onyl]carbo
cyclic]amino]carbonyl]-4-methyl(G) Phosphonic acid, [1[(5,5-dialkyl-2-substituted-substituted heteromonocycle]-1alkyl]-, dialkyl ester.
27OCN1
74786
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
Chemical identity
(G) Perfluoroalkylethyl methacrylate copolymer.
(G) Castor oil, reaction products with an alcohol amine.
(G) Aromatic dicarboxylic acid, polymer with
cycloalkanemethanol, alkanediamine,
alkanedioic acid, hydroxy-2-(hydroxyalkyl)2-alkylcarboxylic acid,
methylenebis[isocyanat ocycloalkane] and
(methylethylidene)bis)phenyleneoxy)]
bis[alkan ol], compd. with dialkylamino ethanol.
(G) Aromatic dicarboxylic acid, polymer with
alkanediamine, alkane dioic acid,
alkanediol, hydroxy-2-(hydroxymethyl)-2alkyl carboxylic acid, methylenebis
[isocyanatocycloalkane] and
[(alkylethylidene) bis(phenyleneoxy)]bis
[alkanol], compd. with dialkylethanamine.
(G) Single-walled carbon nanotubes.
6/22/2016
9/19/2016
CBI .............................
(G) Water and oil repellent .............................
P–13–0382 ....
6/22/2016
9/19/2016
CBI .............................
(G) Plastics .....................................................
P–13–0520 ....
6/22/2016
9/19/2016
Alberdingk Boley Inc ..
(S) Coatings for wood metal and plastic ........
P–13–0521 ....
6/22/2016
9/19/2016
Alberdingk Boley, Inc
(S) Coatings for wood metal and plastic ........
P–13–0720 ....
6/22/2016
9/19/2016
Nano-C, Inc ................
P–13–0883 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0053 ....
6/22/2016
9/19/2016
Takasago ...................
P–14–0055 ....
6/22/2016
9/19/2016
Takasago ...................
P–14–0073 ....
P–14–0093 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(S) Additive for fibers in fabrics; (S) Additive
for fibers in structural and electrical applications; (S) Additive for transparency and
conductivity in electronic devices; (S) Additive in lubricants and grease to improve
wear resistance; (S) Additive to improve
the strength and durability of materials and
batteries; (S) Catalyst support for use in
fuel cells; (S) Coating additive to improve
corrosion resistance of metals; (S) Use as
a nonporous network in gas diffusion layers; (S) Use as a semi-conductor, conductive, or resistive element in electronic circuitry and devices; (S) Use as an
electromechanical switch in electronic circuitry and devices; (S) Use in film laminates to improve structural, electrical, or
electrochemical properties of composite;
(S) Use in separation of chemicals; (S)
Use with materials to improve mechanical
properties or electrical conductivities.
(G) Corrosion inhibitor for down-hole well
treatment and pipelines used in the oil and
gas industry.
(S) Fragrance in deodorants and cosmetics;
(S) Fragrance in fine fragrance; (S) Fragrance in household products such as
laundry; detergents and air fresheners; (S)
Fragrance in shampoos and body washes.
(S) Fragrance in deodorants and cosmetics;
(S) Fragrance in fine fragrance; (S) Fragrance in household products such as
laundry detergents and air; Fresheners; (S)
Fragrance in shampoos, body wash.
(G) Manufacturing intermediate ......................
(G) Resin for coatings ....................................
P–14–0094 ....
6/22/2016
9/19/2016
CBI .............................
(G) Crosslinking agent ....................................
P–14–0246 ....
6/22/2016
9/19/2016
Shell Chemical, LP .....
P–14–0266 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0314 ....
P–14–0321 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–13–0377 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–14–0323 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0472 ....
6/22/2016
9/19/2016
CBI .............................
(S) Cleaning adn inks; (S) Electronics; (S)
Other solvents; (S) Paint and coating.
(G) Functions as an oil-soluble corrosion inhibitor for use in oil and gas wells and
pipelines.
(G) Industrial flame retardant .........................
(G) Site-limited isolated and recycled intermediate.
(G) Site-limited, isolated and recycled intermediate.
(G) Site Controlled Intermediate .....................
P–14–0481 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0482 ....
P–14–0485 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
VerDate Sep<11>2014
19:21 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00025
(G) Base material in industrial rubber synthesis; (G) Base material in industrial rubber synthesis.
(G) Industrial chemical ....................................
(G) Fuel cell component .................................
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
(G) Fatty acids, tall oil, reaction products with
polyamine, 2-mercaptoacetate.
(S) 2-pentanone, 3-methyl-5-(2,2,3trimethylcyclopentyl)-
(S) Cyclohexanecarboxylic acid, 2,2,6trimethyl-,2-propen-1-yl ester.
(G) Fluorinated alcohol.
(G) Phenol, bis alkylalylidene-, polymer with
haloalkyl hetermonocycle, alkylhexanoate,
reaction products with substituted amines.
(G) Substituted polyalkylene
polycarbomonocyclic ester, 2alkoxyethanol- and dialkylene glycol alkyl
ether-blocked.
(S) 2-propanol, 1-ethoxy-, 2-acetate.
(G) Tall oil fatty acid diethylenetriamine
compds. with substituted polyethylene glycol ether.
(G) Poly aliphatic phosphate.
(G) Hydrochlorofluoroprop ene.
(G) Hydrochlorofluoroprop ene.
(G) Polyphosphoric acids, 2-[alkyl-1-oxo-2propen-1-yl)oxy]ethyl esters, compds. with
n-(aminoiminomethyl)ure a.
((G) Alkene, hexasubstituted, telomer with
disubstituted alkene and polysubstituted alkane.
(G) Organic salt.
(G) Rare earth oxide.
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
74787
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
CBI .............................
(G) Paper additive ..........................................
P–14–0574 ....
P–14–0627 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–14–0630 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0636 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0637 ....
6/22/2016
9/19/2016
CBI .............................
(G) Open non-dispersive use; dispersive use
(S) Solvent in a variety of applications; laboratory chemical/solvent; cleaning agent.
(S) Pigment for liquid coatings solvent based
system; (S) Pigment for polymer materials;
(S) Pigment for powder coatings.
(S) Functional resin coating/protective coating; functional resin insulating glass sealant; functional resin aerospace sealant.
(G) Textile treatment .......................................
P–14–0642 ....
6/22/2016
9/19/2016
CBI .............................
P–14–0683 ....
6/22/2016
9/19/2016
Qualice, LLC ..............
P–14–0684 ....
6/22/2016
9/19/2016
Qualice, LLC ..............
P–14–0758 ....
P–14–0829 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–14–0865 ....
P–15–0029 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Maroon, Inc ................
(S) Low foam surfactant for the
autodishwasher market; low foam surfactant for the household cleaning market.
(S) Extreme pressure additive in lubricants;
(S) Flame retardant in rubber products.
(S) Extreme pressure additive in lubricants;
(S) Flame retardant in rubber products.
(G) Urethane foam ..........................................
(S) Surfactant for use in paints, coatings,
inks, waxes, detergents, polishes, adhesives, and lubricants.
(G) Isolated intermediate ................................
(S) Antioxidant for plastics ..............................
P–15–0106 ....
6/22/2016
9/19/2016
CBI .............................
(G) Mining and fuel additive ...........................
P–15–0114 ....
6/22/2016
9/19/2016
CBI .............................
(S) Dielectric medium; heat transfer ...............
P–15–0123 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0310 ....
6/22/2016
9/19/2016
P–15–0320 ....
6/22/2016
9/19/2016
Sasol Chemicals
(USA), LLC.
CBI .............................
(S) Fragrance ingredient for use in fragrances for soaps, detergents, cleaners
and other household products.
(S) Lubricant in special chain oils for conveyor belts.
(S) Dielectric medium .....................................
P–15–0353 ....
P–15–0357 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–15–0372 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0377 ....
6/22/2016
9/19/2016
PCCR USA, Inc ..........
P–15–0386 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0387 ....
P–15–0392 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Polynt S.P.A ...............
P–15–0419 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0433 ....
P–15–0436 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–15–0442
P–15–0443
P–15–0444
P–15–0445
P–15–0446
P–15–0447
P–15–0450
P–15–0469
sradovich on DSK3GMQ082PROD with NOTICES
P–14–0496 ....
....
....
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
(G) Lubricant additive .....................................
(G) Stain block, surfactant, and antiblock
agent.
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Mixed metal oxide for batteries ................
(G) Surfactant .................................................
P–15–0474 ....
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
P–15–0475 ....
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
P–15–0476 ....
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
P–15–0477 ....
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
P–15–0478 ....
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00026
(G) Lubricant additive .....................................
(G) Raw material for thermal paper manufacture.
(G) Surfactant .................................................
(S) Plasticizer in automotive parts; (S) Plasticizer in pvc cables.
(G) Ingredient for consumer products, dispersive use.
(G) Industrial coating polymer ........................
(S) Plasticizer for pvc powders for car interiors manufacturing; plasticizer for pvc
compounds for cables.
(G) Flame retardant material ..........................
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Polyphosphoric acids, 2-[(alkyl-1-oxo-2propen-1-yl)oxy]ethyl esters, compds. with
n-(aminoiminomethyl)ure a, polymers with
bu acrylate, n-(hydroxymethyl)-2propenamide and styrene.
(G) Fatty acid esters with polyol.
(G) Cyclic amide.
(S) Bismuth bromide iodide oxide.
(G) Chloroalkane, polymer with
chloroalkoxyalkane and sodium sulfide
(na2sx).
(G) Perfluoroalkylethyl methacrylate copolymer.
(S) Oxirane, 2-ethyl-, polymer with oxirane,
mono-c12-16-alkyl ethers.
(S) Tetradecane, chloro derivatives.
(S) Alkanes, c14-16, chloro.
(G) Polyamine-based polyol.
(G) Perfluropolyethylene glycol polymer.
(G) Aromatic amide oxime.
(S) 2,4,8,10-tetraoxa-3,9diphosphaspiro[5.5]und ecane,3,9-bis[2-(1methyl-1-phenylethyl)-4-(1,1,3,3tetramethylbutyl)pheno xy](G) Alkene reaction and distillation by-products and residues.
(S) 2-butanone, 1,1,1,3,4,4,4-heptafluoro-3(trifluoromethyl)(G) Alkyl substituted 5-benzofuranol.
(S) 1,2,4-benzenetricarboxylic acid, mixed
decyl and octyl triesters.
(S) Propanenitrile, 2,3,3,3-tetrafluoro-2(trifluoromethyl)(G) Chlorinated complex ester.
(G) Benzenesulfonamide, phenyl substituted
carbonyl.
(G) 1,3-propanediamine, n1-alky,-,
carboxymethyl derivs‘
(S) 1,2,4-benzenetricarboxylic acid, 1,2,4trionyl ester.
(S) 2-cyclohexen-1-ol, 2-methyl-5-(1methylethenyl)-, 1-acetate, (1r,5r)(G) Modified fluoroalkyl acrylate copolymer.
(S) 1,2,4-benzenetricarboxylic acid, mixed
decyl and octyl triesters.
((G) 2,2-bis[3′,5′-dihalo-4′-haloalkyloxy
carbomonocycle] propane.
(G) Chlorinated complex ester.
(G) Anionic aqueous fluorochemical dispersion.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Lithium mixed metal oxide.
(G) Glycerides, c8-18 and c18 unsaturated,
from fermentation.
(S) 2-furancarboxylic acid, 5-methyl-, ethyl
ester.
(S) 2-furancarboxylic acid, 5-methyl-, methyl
ester.
(S) 2-furancarboxylic acid, 5-methyl-, 1methylethyl ester.
(S) 2-furancarboxylic acid, 5-methyl-,
tetradecyl ester.
(S) 2-furancarboxylic acid, 5-methyl-, 2,2′[ethanediylbis(oxy-2,1-ethanediyl) ester.
27OCN1
74788
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
Chemical identity
(S) 2-furancarboxylic acid, 5-methyl-, 2,2′[oxybis(methyl-2,1-ethanediyl)] ester.
(G) Benzaldehyde, reaction products with
polyalkylenepolyamine s, hydrogenated, reaction products with alkyl ketone.
(G) Multi-walled carbon nanotubes.
6/22/2016
9/19/2016
xF Technologies .........
(S) Organic solvent; (S) Plasticizer ................
P–15–0481 ....
6/22/2016
9/19/2016
CBI .............................
(S) Curing agent for epoxy coating systems ..
P–15–0487 ....
6/22/2016
9/19/2016
Daewoo International
USA Corp.
P–15–0488 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–15–0479 ....
6/22/2016
9/19/2016
Daewoo International
USA Corp.
(S) Additive for fibers in structural and electrical applications; additive for fibers in fabrics and textiles; (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in
electronic circuitry and devices; (S) Additive for weight reduction in materials; (S)
Use as a catalyst support in chemical manufacturing; Coating additive to improve corrosion resistance or conductive properties;
(S) Use as a filter additive to remove
nanoscale materials; use as a semi-conducting compounding additive for high-voltage cable; use as an additive for superhydrophobicity; (S) Use as a heat-generating element in heating devices and materials; (S) Use as an additive for electrostatic discharge (esd) in electronic devices,
electronics, and materials; (S) Use as an
additive for electromagnetic interface (emi)
shielding in electronic devices; additive for
electrodes in electronic materials and electronic devices; (S) Use as an additive to
improve conductivity in electronic circuitry
energy storage systems, and devices; use
as an electron emitter for lighting and x-ray
sources. (S) Use with materials to improve
mechanical properties or electrical conductivities.
(S) Additive for fibers in structural and electrical applications; additive for fibers in fabrics and textiles; (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in
electronic circuitry and devices; (S) Additive for weight reduction in materials; (S)
Use as a catalyst support in chemical manufacturing; coating additive to improve corrosion resistance or conductive properties;
(S) Use as a filter additive to remove
nanoscale materials; use as a semi-conducting compounding additive for high-voltage cable; use as an additive for superhydrophobicity; (S) Use as a heat-generating element in heating devices and materials; (S) Use as an additive for electrostatic discharge (esd) in electronic devices,
electronics, and materials; (S) Use as an
additive for electromagnetic interface (emi)
shielding in electronic devices; additive for
electrodes in electronic materials and electronic devices; (S) Use as an additive to
improve conductivity in electronic circuitry,
energy storage systems, and devices; use
as an electron emitter for lighting and x-ray
sources. (S) Use with materials to improve
mechanical properties or electrical conductivities.
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
(G) Multi-walled carbon nanotubes.
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
6/22/2016
9/19/2016
Daewoo International
USA Corp.
P–15–0490 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–15–0489 ....
6/22/2016
9/19/2016
Daewoo International
USA Corp.
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00028
Use(s)
(S) Additive for fibers in structural and electrical applications; additive for fibers in fabrics and textiles; (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in
electronic circuitry and devices; (S) Additive for weight reduction in materials; (S)
Use as a catalyst support in chemical manufacturing; coating additive to improve corrosion resistance or conductive properties;
(S) Use as a filter additive to remove
nanoscale materials; use as a semi-conducting compounding additive for high-voltage cable; use as an additive for superhydrophobicity; (S) Use as a heat-generating element in heating devices and materials; (S) Use as an additive for electrostatic discharge (esd) in electronic devices,
electronics, and materials. (S) Use as an
additive for electromagnetic interface (emi)
shielding in electronic devices; additive for
electrodes in electronic materials and electronic devices; (S) Use as an additive to
improve conductivity in electronic circuitry
energy storage systems, and devices; use
as an electron emitter for lighting and x-ray
sources. (S) Use with materials to improve
mechanical properties or electrical conductivities.
(S) Additive for fibers in structural and electrical applications; additive for fibers in fabrics and textiles; (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in
electronic circuitry and devices; (S) Additive for weight reduction in materials; (S)
Use as a catalyst support in chemical manufacturing; coating additive to improve corrosion resistance or conductive properties;
(S) Use as a filter additive to remove
nanoscale materials; use as a semi-conducting compounding additive for high-voltage cable; use as an additive for superhydrophobicity; (S) Use as a heat-generating element in heating devices and materials. (S) Use as an additive for electrostatic discharge (esd) in electronic devices,
electronics, and materials; (S) Use as an
additive for electromagnetic interface (emi)
shielding in electronic devices; additive for
electrodes in electronic materials and electronic devices; (S) Use as an additive to
improve conductivity in electronic circuitry,
energy storage systems, and devices; use
as an electron emitter for lighting and x-ray
sources; (S) Use with materials to improve
mechanical properties or electrical conductivities.
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Multi-walled carbon nanotubes.
(G) Multi-walled carbon nanotubes.
27OCN1
74789
74790
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
Daewoo International
USA Corp.
P–15–0506
P–15–0525
P–15–0526
P–15–0527
P–15–0528
P–15–0540
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
CBI
P–15–0562 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0580 ....
P–15–0584 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
P–15–0597 ....
6/22/2016
9/19/2016
CBI .............................
The Lewis Chemical
Company.
CBI .............................
P–15–0632 ....
P–15–0633 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Firmenich, Inc .............
P–15–0653 ....
P–15–0697 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–15–0705 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0706 ....
6/22/2016
9/19/2016
CBI .............................
P–15–0707 ....
6/22/2016
9/19/2016
CBI .............................
(G) Ingredient for multipurpose exterior coatings.
P–15–0719
P–15–0720
P–15–0721
P–15–0722
P–15–0723
P–15–0724
P–15–0725
P–15–0726
sradovich on DSK3GMQ082PROD with NOTICES
P–15–0491 ....
....
....
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
P–15–0734 ....
P–16–0017 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Alcoa, Inc ...................
P–16–0043 ....
6/22/2016
9/19/2016
P–16–0054 ....
6/22/2016
9/19/2016
Akzo Nobel Surface
Chemistry, LLC.
Blaser Swisslube, Inc
(G) Flame retardant synergist ........................
(S) Polyurethane prepolymer ..........................
(S) Polyurethane prepolymer ..........................
(S) Polyurethane prepolymer ..........................
(S) Polyurethane prepolymer ..........................
(S) Polyurethane prepolymer ..........................
(S) Polyurethane prepolymer ..........................
(S) Co-polymer for use in adhesives and
sealant formulations.
(S) Wastewater heavy metals removal ..........
(S) Blast suppressor for nitrogen based fertilizers.
(S) Polymeric corrosion inhibitor downhole
oilfield.
(S) Metal working fluid component .................
P–16–0086 ....
6/22/2016
9/19/2016
CBI .............................
(G) Coating component ..................................
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
.............................
PO 00000
Frm 00029
(S) Additive for fibers in structural and electrical applications; additive for fibers in fabrics and textiles; (S) Additive for heat transfer and thermal emissions in electronic devices and materials; use as a semi-conductor, conductive, or resistive element in
electronic circuitry and devices; (S) Additive for weight reduction in materials; (S)
Use as a catalyst support in chemical manufacturing; coating additive to improve corrosion resistance or conductive properties;
(S) Use as a filter additive to remove
nanoscale materials; use as a semi-conducting compounding additive for high-voltage cable; use as an additive for superhydrophobicity; (S) Use as a heat-generating element in heating devices and materials; (S) Use as an additive for electrostatic discharge (esd) in electronic devices,
electronics, and materials; (S) Use as an
additive for electromagnetic interface (emi)
shielding in electronic devices; additive for
electrodes in electronic materials and electronic devices; (S) Use as an additive to
improve conductivity in electronic circuitry,
energy storage systems, and devices; use
as an electron emitter for lighting and x-ray
sources. (S) Use with materials to improve
mechanical properties or electrical conductivities.
(G) Component in cleaning formulation .........
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(G) Catalyst .....................................................
(S) Chemical intermediate in the production
of poly[oxy(methyl-1,2-ethanediyl)],a-sulfow-hydroxy-c10-16-alkyl ethers cas #
1497417-15-8, and/or sodium salt of same.
(S) Pigment for automotive coatings to be
used in automotive oem and refinish.
(G) Coating .....................................................
(S) Foaming agent in industrial or hard surface cleaners.
(S) Dispersing agent for use in paints, pigments, and coatings..
(S) Salt for polymer ........................................
(G) As part of a fragrance formula (dispersive
use).
(G) Coating .....................................................
(S) Boron-free, ferrous corrosion inhibitor for
water-based metalworking fluids.
(S) Alkylarylamine used as an additive and
octane booster in aviation fuels.
(G) Ingredient for multipurpose exterior coatings.
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Multi-walled carbon nanotubes.
(G) Alkyl phosphate ammonium salt.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(G) Rare earth doped zirconium oxide.
(S) Alcohols, c10-16, propoxylated.
(G) Substituted alkylsilanes, reaction products with a mixture of metal oxides.
(G) Cycloaliphatic epoxy.
(S) Amides, coco, n,n-bis(2-hydroxypropyl).
(G) Polyethylene glycol alkyl ether, sodium
salt.
(G) Mixed amine salt.
(S) 1(2h)-naphthalenone,4-ethyloctahydro-8methyl.
(G) Cycloaliphatic epoxide.
(G) Alkyl alkylenetriamine compd. with
alkanol ethoxylate phosphate.
(G) Alkylarylamine.
(G) Mixture of aliphatic n-alkyl ureas containing substituted cyclohexyl and terminal
alkoxysilane groups.
(G) Mixture of aliphatic n-alkyl ureas containing substituted cyclohexyl and terminal
alkoxysilane groups.
(S) Poly (1,4-diisopropyl benzene).
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Aliphatic polyester polyol.
(G) Triethoxysilylalkoxy polyalkylene glycol.
(G) Polymeric sulfide.
(G) Mixed metals layered double hydroxide.
(S) Amines, tallow alkyl, ethoxylated, polymers with adipic acid.
(S) Phosphoric acid, mixed 2-hexlydecyl and
2-hexyldodecyl and 2-octyldecyl and 2octyldodecyl mono- and diesters.
(G) Mixed metal oxide-halide complex.
27OCN1
74791
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
(G) Industrial coatings, open non-dispersive
use.
(G) Ingredient for consumer products, dispersive use.
(G) Aqueous coating .......................................
6/22/2016
9/19/2016
CBI .............................
P–16–0093 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0099 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0119 ....
P–16–0120 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
The Shepherd Color
Co.
CBI .............................
CBI .............................
(G) Intermediate ..............................................
(G) Pigment for anti-corrosive paints .............
P–16–0122 ....
P–16–0125 ....
P–16–0127 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0143
P–16–0150
P–16–0151
P–16–0152
P–16–0153
P–16–0154
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
CBI
.............................
.............................
.............................
.............................
.............................
.............................
(S) Flotation of silica from iron ore and selected non-ferrous minerals.
(G) Chemical intermediate ..............................
(G) Intermediate ..............................................
(G) Intermediate ..............................................
(G) Intermediate ..............................................
(G) Lubricant additive .....................................
(G) Lubricant additive .....................................
P–16–0155 ....
6/22/2016
9/19/2016
CBI .............................
(G) Lubricant additive .....................................
P–16–0157 ....
P–16–0164 ....
P–16–0165 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
Dura Chemicals, Inc ...
P–16–0167 ....
P–16–0180 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Fabric Treatment ......................................
(G) Processing aid ..........................................
(S) Ferrous propionate is a component in a
metal organic product that will be used in
paint and ink driers, UPR promoters, lube/
grease additives, fuel additives, polymerization catalysts, specialty petrochemical
catalysts, etc., the amount of the ferrous
propionate will be well under 1% in any
final product; (S) iron,2-ethylhexanoate propionate complexes is a component in a
metal organic product that will be used in
paint and ink driers, UPR promoters, lube/
grease additives, fuel additives, polymerization catalysts, specialty Petrochemical
catalysts, etc., the amount of the Iron, 2ethyhexanoate propionate complexes will
be well under 1% in any final product.
(S) Light stabilizer for plastic articles .............
(S) Component of industrial and maintenance
coatings.
P–16–0186 ....
6/22/2016
9/19/2016
CBI .............................
(G) Surfactant .................................................
P–16–0192 ....
6/22/2016
9/19/2016
Evonik Corporation .....
P–16–0194
P–16–0195
P–16–0196
P–16–0197
P–16–0198
P–16–0199
P–16–0205
....
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
CBI
CBI
P–16–0206 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0092 ....
6/22/2016
9/19/2016
CBI .............................
(S) Reinforcing filler; coupling agent for production of tire/rubber goods.
(G) Process aid ...............................................
(G) Process aid ...............................................
(G) Process aid ...............................................
(G) Process aid ...............................................
(G) Process aid ...............................................
(G) Process aid ...............................................
(G) Lubricant Oil; (S) General Industrial Oil;
(S) Hydraulic oil.
(G) Pigment wetting and dispersing additive
P–16–0207 ....
P–16–0217 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–16–0218 ....
6/22/2016
9/19/2016
Gaco Western ............
P–16–0221 ....
6/22/2016
9/19/2016
CBI .............................
VerDate Sep<11>2014
19:21 Oct 26, 2016
Jkt 241001
.............................
.............................
.............................
.............................
.............................
.............................
.............................
PO 00000
Frm 00030
(G) Intermediate ..............................................
(G) Resin for coatings ....................................
(G) Additive for electrolyte solution ................
(G) Processing aid for ground mineral slurries
(open, non dispersive use).
(G) Architectural Coating; (G) Spray Foam Insulation; (G) Reactant: Architectural Coating; (G) Reactant: Spray Foam Insulation.
(S) Coating agent ...........................................
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Polymeric polyamine.
(S) 2-cyclohexen-1-one, 2-methyl-5-propyl(G) Polyethylene glycol polymer with aliphatic
polycarbodiimide, bis(alkoxysilylpropyl)
amine blocked.
(G) Chlorofluorocarbon.
(S) Aluminum vanadium zinc hydroxide
oxide.
(G) Chlorofluorocarbon.
(G) Alkoxy alkyl substituted alkanoic acid,
ion(1-), salts with substituted
carbomonocycle substituted
heteromonocyclic polymer ester with substituted carbomonocycle alkyl ester-alkyl
substituted alkanol reaction products.
(G) Dialkyl ether ammonium salts.
(G) Haloalkylfurancarboxal dehyde.
(G) Chlorofluorocarbon.
(G) Perfluoropolyether halide.
(G) Perfluoropolyether aryl.
(G) Substituted aryl-perfluoropolyether.
(G) Sulfonated perfluoropolyether aromatic
transition metal salt.
(G) Sulfonated perfluoropolyether aryl alkali
metal salt.
(G) Fluorinated polyurethane.
(G) Thiocarbamic acid derivative.
(S) Iron, 2-ethylhexanoate propionate complexes.
(G) Hindered amine alkyl ester compounds.
(G) Isocyanic acid, polymethylenepolyphen
ylene ester, polymer with a-hydro-whydroxypoly[oxy(meth yl-1,2-ethanediyl)]
and alkylene oxide polymer, alkylamine initiated.
(G) Sodium branched chain alkyl hydroxyl
and branched chain alkenyl sulfonates.
(G) Silanized amorphous silica.
(G)
(G)
(G)
(G)
(G)
(G)
(G)
Silane-treated
Silane-treated
Silane-treated
Silane-treated
Silane-treated
Silane-treated
Amide.
aluminosilicate.
aluminosilicate.
aluminosilicate.
aluminosilicate.
aluminosilicate.
aluminosilicate.
(G) Formaldehyde ketone condensate polymer.
(G) Spiro tetrafluoroborate.
(G) Alkenoic acid, polymer with sodium phosphinate (1:1), mixed salt.
(G) Acetoacetylated glycerin.
(G) Fluorinated organopolysilazane.
27OCN1
74792
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
International Flavors &
Fragrances Inc.
P–16–0246 ....
6/22/2016
9/19/2016
CBI .............................
(S) The notified substance will be used as a
fragrance ingredient, being blended
(mixed) with other fragrance ingredients to
make fragrance oils that will be sold to industrial and commercial customers for their
incorporation into soaps, detergents, cleaners, air fresheners, candles and other similar industrial, household and consumer
products.
(G) Chemical intermediate ..............................
P–16–0253 ....
P–16–0255 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Fatty acid based glyceride blend .............
(S) Blocked catalyst for paint and coatings ....
P–16–0256 ....
6/22/2016
9/19/2016
CBI .............................
(S) Blocked catalyst for paint and coatings ....
P–16–0257 ....
6/22/2016
9/19/2016
CBI .............................
(S) Blocked catalyst for paint and coatings ....
P–16–0258 ....
6/22/2016
9/19/2016
CBI .............................
(S) Blocked catalyst for paint and coatings ....
P–16–0259 ....
6/22/2016
9/19/2016
CBI .............................
(S) Blocked catalyst for paint and coatings ....
P–16–0261 ....
6/22/2016
9/19/2016
CBI .............................
(S) Intermediate ..............................................
P–16–0271 ....
6/22/2016
9/19/2016
Oxea Corporation .......
(S) Flexible PVC plasticizer for wire insulation
P–16–0273 ....
6/22/2016
9/19/2016
CBI .............................
(G) Ingredient in metal working fluid ..............
P–16–0274 ....
6/22/2016
9/19/2016
CBI .............................
(G) Ingredient in metal working fluids ............
P–16–0275 ....
P–16–0276 ....
P–16–0280 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
(G) Surfactant .................................................
(G) Surfactant .................................................
(G) Co-initiator ................................................
P–16–0281 ....
6/22/2016
9/19/2016
CBI .............................
(G) Reactive polyol .........................................
P–16–0282 ....
P–16–0283 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Allnex USA, Inc ..........
(S) Paint dryier ................................................
(S) Resin for automotive coatings ..................
P–16–0284 ....
6/22/2016
9/19/2016
P–16–0285 ....
P–16–0286 ....
P–16–0287 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
Deepak Nitrite Corporation, Inc.
CBI .............................
CBI .............................
CBI .............................
(S) Optical Brightener for Textiles, Paper and
Paperboard.
(G) Intermediate ..............................................
(G) Wellbore additive ......................................
(G) Hardener for epoxy coating ......................
P–16–0289 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0290 ....
P–16–0291 ....
P–16–0292 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
P–16–0293 ....
6/22/2016
9/19/2016
Charkit Chemical Corp
P–16–0299 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0300 ....
6/22/2016
9/19/2016
H.B. Fuller Company ..
(G) Extrusion compounding resin molding
resin.
(G) Fuel additive .............................................
(G) Curing Agent ............................................
(S) Intermediate for use in the manufacture
of polymers.
(S) Compounding of fragrance for industrial
cleaners/janitorial compounds, detergents,
etc.
(S) Reactive (meth)acrylate oligomer for ultra
violet cured 3D printed parts.
(G) Industrial adhesive ...................................
P–16–0301 ....
6/22/2016
9/19/2016
CBI .............................
(G) Intermediate ..............................................
P–16–0302 ....
P–16–0303 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0225 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Plastic additive .........................................
(G) Use for the production of acrylic resin for
waterborne exterior coatings composition.
P–16–0304 ....
P–16–0305 ....
P–16–0306 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
(G) Industrial Adhesive ...................................
(G) Industrial Adhesive ...................................
(G) PhotoInitiator ............................................
P–16–0307 ....
6/22/2016
9/19/2016
CBI .............................
(G) Open, non dispersive use ........................
VerDate Sep<11>2014
19:33 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(S) Isomer mixture of cyclohexanol, 4-ethylidene-2-propoxy-(cas 1631145-48-6) (3545%) and cyclohexanol, 5-ethylidene-2propoxy (cas 1631145-49-7) (45-55%).
(S) 2-pyridinecarboxylic acid, 6-(4-chloro-2fluoro-3-methoxyphenyl)-4,5-difluoro-,
phenylmethyl ester.
(G) Partial esters of fatty acids with glycerol.
(S) 1-butanaminium, n,n,n-tributyl-, ethyl carbonate (1:1).
(S) 1-butanaminium, n,n,n-tributyl-, ethyl carbonate (1:1).
(S) 1-butanaminium, n,n,n-tributyl-, methyl
carbonate (1:1).
(S) 1-butanaminium, n,n,n-tributyl-, ethyl carbonate (1:1).
(S) 1-butanaminium, n,n,n-tributyl-, ethyl carbonate (1:1).
(S) Propanoic acid, 3-(dimethylamino)-2methyl-, methyl ester.
(S) 1,2,4-benzenetricarboxylic acid, 1,2,4trinonyl ester.
(G) Alkyl heteromonocycle, polymer with
heteromonocycle, carboxyalkyl alkyl ether.
(G) Alkyl heteromonocycle, polymer with
heteromonocycle, carboxyalkyl alkyl ether.
(G) Rhamnolipid salt.
(G) Rhamnolipid salt.
(G) Polyether polyol with aromatic
dialkylamine.
(G) Fatty alcohols—dimers, trimmers, polymers.
(G) Manganese complexes.
(G) Alkanedioic acid, polymer with substituted
carbomonocycle, substituted alkane, substituted alkanoic acid and substituted
alkyldiamine, compd. with substituted
alkanol.
(G) Anilino substituted bis-triazinyl derivative
of 4,4′-diaminostilbene-2,2′disulfonic acid.
(G) Ester amine.
(G) Quaternary ammonium salts.
(G) Alkanoic acid, 2-substituted-methyl ester,
reaction products with aromatic diamine[alkanediylbis(oxymethylene)]bis[oxirane]
polymer.
(G) Semi-aromatic polyamide.
(G) Copolymer of maleic acid and olefin.
(G) 1,3-cyclohexanedimethanamine adduct.
(G) Depolymerized waste plastics.
(S) Octanoic acid, phenylmethyl ester.
(G) Polyurethane, methacrylate-blocked.
(G) Oxirane, 2-methyl-, polymer with 1,3-xylylene diisocyanate and oxirane, 3(trimethoxysilyl)propyl isocyanate.
(G) Propyl silsesquioxanes, hydrogen-terminated.
(G) Organic modified propyl silsesquioxane.
(G) Alkyl methyacrylate polymer with styrene,
amino acrylate and acrylic acid, ammonium
salt.
(G) Polyurea grease.
(G) Polyurea grease.
(G) Polyether polyol polymer with aromatic
ester.
(G) Heteropolycycliccarboxylic acid, 1,3dihydro-disubstituted-, polymer with 1,1′methylenebis[4-isocyanatobenzene], reaction products with silica.
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
74793
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
Itaconix Corp ..............
(G) Reactive monomer ...................................
P–16–0309 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0310 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0311 ....
6/22/2016
9/19/2016
CBI .............................
(G) PMN substances are intended for use as
rheological or thixotropic agents used in
the production of solvent based industrial
coatings, high solid aromatic paints, adhesives, sealants, and other types of paints
and topcoats.
(G) PMN substances are intended for use as
rheological or thixotropic agents used in
the production of solvent based industrial
coatings, high solid aromatic paints, adhesives, sealants, and other types of paints
and topcoats.
(S) Coatings for wood, metal and plastic .......
P–16–0312 ....
6/22/2016
9/19/2016
CBI .............................
(S) Coatings for wood, metal and plastic .......
P–16–0313 ....
6/22/2016
9/19/2016
Honeyol, Inc ...............
P–16–0314 ....
6/22/2016
9/19/2016
Firmenich, Inc .............
(S) Use in production of resins (raw material
used in the production of resins).
(G) As part of a fragrance formula .................
P–16–0315 ....
6/22/2016
9/19/2016
CBI .............................
(S) Industrial rubber formulation .....................
P–16–0316 ....
P–16–0317 ....
P–16–0318 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
P–16–0319 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0320 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0321 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0322 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0323 ....
6/22/2016
9/19/2016
Allnex USA, Inc ..........
(G) Drilling chemical .......................................
(G) Drilling chemical .......................................
(G) Additive for Pulp and Paper Processing;
(G) Additive for car wash applications; (G)
Additive for metal working fluids; (G) Additive for textile applications; (G) Processing
aide in oil field applications.
(G) Additive for pulp and paper processing;
(G) Additive for car wash applications; (G)
Additive for metal working fluids; (G) Additive for textile applications; (G) Processing
aide in oil field applications.
(G) Additive for pulp and paper processing;
(G) Additive for car wash applications; (G)
Additive for metal working fluids; (G) Additive for textile applications; (G) Processing
aide in oil field applications.
(G) Additive for Pulp and Paper Processing;
(G) Additive for car wash applications; (G)
Additive for metal working fluids; (G) Additive for textile applications; (G) Processing
aide in oil field applications.
(G) Pulp Bleaching Catalyst; (G) Textile
Bleaching Catalyst.
(G) Coating resin ............................................
P–16–0324 ....
P–16–0325 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0308 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Adhesive for open non-descriptive use ....
(G) Oil & gas extraction ..................................
P–16–0326 ....
6/22/2016
9/19/2016
Firmenich, Inc .............
(G) As part of a fragrance formula .................
P–16–0327 ....
6/22/2016
9/19/2016
CBI .............................
(G) additive in rubber tires ..............................
P–16–0328 ....
6/22/2016
9/19/2016
CBI .............................
(G) Adhesive component; (G) Intermediate ...
VerDate Sep<11>2014
19:21 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(S) Butanedioic acid, 2-methylene-, 1,4-bis
(2-methylpropyl) ester.
(G) Bisamide mixture.
(G) Bisamide mixture.
(G) Aromatic dicarboxylic acid, polymer with
cycloalkanemethanol, alkanediamine,
alkanedioic acid, hydroxy-2-(hydroxyalkyl)2-alkylcarboxylic acid,
methylenebis[isocyanat ocycloalkane] and
[(methylethylidene)bis(phenyleneoxy)]bis
[alka nol].
(G) Aromatic dicarboxylic acid, polymer with
cycloalkanemethanol, alkanediamine,
alkanedioic acid, hydroxy-2-(hydroxyalkyl)2-alkylcarboxylic acid,
methylenebis[isocyanat ocycloalkane] and
[(methylethylidene)bis(phenyleneoxy)]
bis[alka nol].
(S) Tar acids (shale oil), c6?9 fraction,
alkylphenols, low-boiling.
(S) Ethanone, 1-(5-propyl-1,3-benzodioxol-2yl)-.
(G) Alkyldiene, polymer, terminated
alkoxysilylalkylcarbamate.
(G) Aliphatic polyester.
(G) Aliphatic polyester.
(G) Ammonium sulfate, fatty acid esters.
(G) Ammonium sulfate, fatty acid esters.
(G) Ammonium sulfate, fatty acid esters.
(G) Ammonium sulfate, fatty acid esters.
(G) Manganese cyclic (tri)amine chloride
complex.
(G) Formaldehyde, reaction products with
substituted carbomonocycle-substituted
heteromonocycle-alkylene glycol bis [[[substituted(oxoneoalky)oxy]alkyl]amino]alky]
ether polymer and alkyl substituted
alkanediamine, acetate (salts).
(G) Uv-curable urethane acrylate.
(G) Polymer of substituted acrylic acid and
bromohexane.
(S) Propanoic acid, 2,2-dimethyl-,1-methyl-2(1-methylethoxy)-2-oxoethyl ester.
(G) Alkenoic acid, polymer with
alkylalkenoate, sodium salt.
(G) Terephthalic acid, polymer with
alkanepolycarboxylic acids, alkanepolyols,
isophthalic acid, polyetherpolyol, 1,1methylenebis[isocyanatobenzene], phthalic
anhydride and a substituted alkanepolyol.
27OCN1
74794
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
CBI .............................
(G) Adhesive component ................................
P–16–0330 ....
6/22/2016
9/19/2016
H.B. Fuller Company ..
(G) Industrial Adhesive ...................................
P–16–0331 ....
6/22/2016
9/19/2016
H.B. Fuller Company ..
(G) Industrial Adhesive ...................................
P–16–0332 ....
P–16–0333 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Charkit Chemical Corp
P–16–0333 ....
6/22/2016
9/19/2016
Charkit Chemical Corp
P–16–0333 ....
6/22/2016
9/19/2016
Charkit Chemical Corp
P–16–0334
P–16–0335
P–16–0336
P–16–0337
P–16–0338
P–16–0339
P–16–0340
....
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
Lamberti USA Inc .......
Lamberti USA, Inc ......
CBI .............................
CBI .............................
CBI .............................
CBI .............................
Solazyme, Inc .............
P–16–0341 ....
6/22/2016
9/19/2016
Perstorp Polyols .........
P–16–0342 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0343 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0344 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0345 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of coating ..............................
(S) Compounding of fragrance for industrial
cleaners/janitorial compounds, detergents,
etc.
(S) Compounding of fragrance for industrial
cleaners/janitorial compounds, detergents,
etc.
(S) Compounding of fragrance for industrial
cleaners/janitorial compounds, detergents,
etc.
(G) Additive for Industrial Purposes ...............
(G) Additive for Industrial Purposes ...............
(G) Fuel additive—destructive use .................
(S) Monomer ...................................................
(G) Dyestuff ....................................................
(G) Dyestuff ....................................................
(G) Feedstock for oleochemical industry; (G)
Renewable oil source for fuels.
(G) Elastomer; (S) Industrial coatings; (S) Adhesive components.
(S) Modified acrylic polymer used as a dispersant for deflocculation of pigments in industrial paints and coatings.
(S) Modified urethane polymer used as a dispersant for deflocculation of pigments in industrial paints and coatings.
(S) Modified acrylic polymer used as a dispersant for deflocculation of pigments in industrial paints and coatings.
(G) Processing aid ..........................................
P–16–0346 ....
P–16–0347 ....
P–16–0348 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
H.B. Fuller Company ..
H.B. Fuller Company ..
CBI .............................
(G) Industrial Adhesive ...................................
(G) Industrial Adhesive ...................................
(G) Industrial lubricant ....................................
P–16–0349 ....
6/22/2016
9/19/2016
CBI .............................
(G) Fuel additive .............................................
P–16–0350 ....
P–16–0351 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Solazyme, Inc .............
P–16–0352 ....
6/22/2016
9/19/2016
CBI .............................
(G) Polymer reactant ......................................
(G) Feedstock for oleochemical industry; (G)
Renewable oil source for fuels.
(G) Industrial catalyst ......................................
P–16–0353 ....
6/22/2016
9/19/2016
Gantrade Corp ...........
P–16–0354
P–16–0355
P–16–0356
P–16–0357
P–16–0358
P–16–0359
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0329 ....
....
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
CBI .............................
CBI .............................
Dic International
(USA), LLC.
P–16–0360 ....
6/22/2016
9/19/2016
Oleon Americas, Inc ...
(G) Fuel additive .............................................
P–16–0361 ....
6/22/2016
9/19/2016
American Process Inc
(G) Binders .....................................................
P–16–0362 ....
6/22/2016
9/19/2016
American Process Inc
P–16–0363 ....
6/22/2016
9/19/2016
CBI .............................
(G) Binders; (G) Plastic reinforcement; (G)
Viscosifying agent.
(G) Open, non-dispersive ...............................
P–16–0364 ....
6/22/2016
9/19/2016
CBI .............................
(G) Intermediate used completely on site ......
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00033
(S) Chain extender and curative for use in
polymer manufacturing.
(G) Intermediate ..............................................
(G) Intermediate ..............................................
(G) Wellbore additive ......................................
(G) Wellbore additive ......................................
(S) Intermediate for further polymer reaction
(G) Pigment additives for industrial coatings
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
Chemical identity
(G) Polymer of alkanepolycarboxylic acids,
alkanepolyols, isophthalic acid,
polyetherpolyols, 1,1methylenebis[isocyanatobenzene], terephthalic acid, phthalic anhydride and a substituted alkanepolyol.
(G) Hydroxy functional triglyceride polymer
with glycerol mono-ester and 1,1′methylenebis[isocyanatobenzene].
(G) Hydroxy functional triglyceride polymer
with glycerol mono-ester and 1,1′methylenebis[4-isocyanatobenzene].
(G) Carbomonocycle phosphate metal salt.
(S) 2-hexyldecanal.
(S) 8-pentadecanone.
(S) Methylpentadecanone (unspecified).
(G) Polymeric amide.
(G) Polymeric amide.
(G) Polyolefin ester.
(G) Aliphatic acrylate.
(G) Substituted xanthene derivative.
(G) Azo derivatives.
(G) Glycerides, c8-18 and c18 unsaturated,
from fermentation.
(S) 2-oxepanone, homopolymer, ester with
1,6-hexanediol.
(G) Modified acrylic polymer.
(G) Modified urethane polymer.
(G) Modified urethane polymer.
(G) Acrylamide, polymer with methacrylic
acid derivatives.
(G) Alkylamine with isocyanate.
(G) Alkylamine with isocyanate.
(G) Polypentaerythritol, mixed esters with linear and branched monoacids.
(G) Quaternary ammonium salt of
polyisobutene succinic acid.
(G) Polyaralkyl aryl ester of methacrylic acid.
(G) Glycerides, c14-18 and c16-c18 unsaturated, from fermentation.
(G) Reaction product of
hydroxybenzaldehyde and fatty alkyl amine
ether.
(S) Benzenamine, 4-[(4-amino-3chlorophenyl)methyl]-2-ethyl(G) Esteramine.
(G) Esteramine.
(G) Quaternary ammonium salts.
(G) Quaternary ammonium salts.
(G) Alkyl phenol.
(G) Carbopolycycle-bis(diazonium), dihalo-,
chloride (1:2), reaction products with metal
hydroxide, 4-[(dioxoalkyl)amino]substituted
benzene, 2-[(dioxoalkyl)amino]substituted
benzene, 5-[(dioxoalkyl)amino]-2-hydroxysubstituted benzene and oxo-nphenylalkanamide.
(S) Poly (oxy-1,2-ethanediyl), alpha-(1oxodocosyl)-omega-[(1-oxodocosyl)oxy](S) Pulp, cellulose, reaction products with
lignin [nanocrystals].
(S) Pulp, cellulose, reaction products with
lignin [nanofibrils].
(G) Blocked polyester polyurethane, neutralized.
(G) Nitrile-butadiene-acrylate terpolymers.
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
74795
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
Chemical identity
(G) Alkyl carbonate, polymer with, substituted
alkanes and substituted heteromonocycle,
substituted alkyl acrylate-blocked.
(G) Blocked polyisocyanate.
(G) Substituted heteromonocycle, polymer
with substituted alkane and ethoxylated alkane, substituted heteromonocycle substituted alkyl ester-blocked.
(G) Aromatic dicarboxylic acid, polymer with
adipic acid and alkanediol.
(G) Substituted heteromonocycle, telomer
with substituted carbomonocycles, substituted alkyl ester.
(G) Polysiloxane with functional groups.
(G) Polyester polymer phosphate ester alkyl
alkyl.
(G) Polyester phosphate alkyl alkyl esters.
(G) Tris(alkyloxyphenyl)tri azine compounds.
(G) Metal branched alkyl substituted
carbomonocycle complexes with substituted alkyl carbomonocycle.
(G) Alkyl methacrylates, polymer with
olefines.
(G) Hydroxystyrene resin.
(G) Polyester polyol.
(G) Polyester polyol.
(G) Vinyl functional polymethylalkylpolymer.
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene
glycol ether with bisphenol A (2:1) polymerN1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
acetates (salts).
(G) Propanoic acid, 2-hydroxy-, compds. With
hydrolyzed bisphenol A-epichlorohydrinpolyethylene glycol ether with bisphenol A
(2:1) polymer-N1-(1,3-dimethylbutylidene)N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates (salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene
glycol ether with bisphenol A (2:1) polymerN1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene
glycol ether with bisphenol A (2:1) polymerN1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
acetates (salts).
(G) Propanoic acid, 2-hydroxy-, compds. With
hydrolyzed bisphenol A-epichlorohydrinpolyethylene glycol ether with bisphenol A
(2:1) polymer-N1-(1,3-dimethylbutylidene)N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products formates (salts).
(G) Formic acid, compds. with hydrolyzed
bisphenol A-epichlorohydrin-polyethylene
glycol ether with bisphenol A (2:1) polymerN1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates(salts).
6/22/2016
9/19/2016
Allnex USA, Inc ..........
(S) UV Curable coating resin .........................
P–16–0366 ....
P–16–0367 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
Allnex USA, Inc ..........
(G) Open, non-dispersive ...............................
(S) UV curable coating resin ..........................
P–16–0368 ....
6/22/2016
9/19/2016
CBI .............................
(S) Adhesive Coating for Carpet Backing ......
P–16–0369 ....
6/22/2016
9/19/2016
Allnex USA, Inc ..........
(S) Ultra violet curable coating resin ..............
P–16–0370 ....
P–16–0371 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Crosslinker for adhesives and coatings ...
(G) Wetting and dispersing additive ...............
P–16–0372 ....
P–16–0373 ....
P–16–0374 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
(G) Wetting and dispersing additive ...............
(S) UV absorber for plastic articles ................
(G) Oil additive ................................................
P–16–0375 ....
6/22/2016
9/19/2016
CBI .............................
(G) Binder for seal application ........................
P–16–0376
P–16–0377
P–16–0378
P–16–0379
P–16–0380
....
....
....
....
....
6/22/2016
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
9/19/2016
CBI
CBI
CBI
CBI
CBI
(G)
(G)
(G)
(G)
(G)
P–16–0381 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of electrocoat resin ...............
P–16–0382 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of electrocoat resin ...............
P–16–0383 ....
6/22/2016
9/19/2016
CBI .............................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0384 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0365 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of electrocoat resin ...............
P–16–0385 ....
6/22/2016
9/19/2016
CBI .............................
(G) Component of electrocoat resin ...............
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
.............................
.............................
.............................
.............................
.............................
PO 00000
Frm 00034
Photolithography .......................................
Film component ........................................
Film component ........................................
Intermediate for polymer synthesis ..........
Component of electrocoat resin ...............
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
27OCN1
74796
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Case No.
Date
received
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
6/22/2016
9/19/2016
CBI .............................
P–16–0387 ....
6/22/2016
9/19/2016
CBI .............................
(S) Additive for motor oil formulations and
gear oil lubricants. The compound serves
two primary functions. It acts as a seal
swell additive. The elastomers used in the
seals of the motor/gear box will absorb a
small amount of the chemical compound
and swell. This prevents seals from leaking
and gives them a longer service life. The
chemical also serves as a boundary lubricant. The two ester groups make this compound polar.
The polarity causes the compound to be attracted to metal surfaces and adhere. This
creates a boundary layer between the
metal surface and the bulk primary lubricant used in the motor/gear oil formulation.
(G) Additives for polymers ..............................
P–16–0388 ....
6/22/2016
9/19/2016
CBI .............................
(G) Hardener for epoxy coating ......................
P–16–0389 ....
6/22/2016
9/19/2016
CBI .............................
(G) Oil & gas extraction ..................................
P–16–0390 ....
6/22/2016
9/19/2016
CBI .............................
(S) Coating resin used in anti-fogging clear
coat applied to automotive parts.
P–16–0391 ....
6/22/2016
9/19/2016
CBI .............................
(G) Stabilizer ...................................................
P–16–0392 ....
P–16–0393 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
(G) Wax ..........................................................
(S) Plasticizer for use with polymers ..............
P–16–0394 ....
6/22/2016
9/19/2016
CBI .............................
(G) Adhesive ...................................................
P–16–0395 ....
6/22/2016
9/19/2016
CBI .............................
(S) Polymeric intermediate for the production
of acrylic polymers for industrial coatings.
P–16–0396 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0398 ....
P–16–0399 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
TryEco LLC ................
P–16–0400 ....
6/22/2016
9/19/2016
Shell Chemical, LP .....
P–16–0401 ....
6/22/2016
9/19/2016
CBI .............................
(G) Specialty chemical for processing additive.
(G) Corrosion Inhibitor ....................................
(S) Agricultural soil amendment for filed
crops, seed coating and turf.
(S) Agrochemical; (S) Chemical Intermediate;
(S) Metalworking Fluid Use; (S) Use in
cleaning Fluids; (S) Use in Cured Coatings.
(G) Adhesive ...................................................
P–16–0402 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0403 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0404 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0405 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0386 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0406 ....
P–16–0407 ....
P–16–0408 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
P–16–0409 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0410 ....
6/22/2016
9/19/2016
CBI .............................
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00035
Chemical identity
(S) Hexanedioic acid, 1,6-bis(3,5,5trimethylhexyl) ester.
(G) Aliphatic polycarboxylic acid, polymer
with alicyclic polyhydric alcohol and
polyoxyalkylene.
(G) Aliphatic polyamines, polymers with
bisphenol A and epichlorohydrin.
(G) Polymer of substituted acrylic acid,
mercaptoethanol and bromohexane.
(G) Alkyl alkenoic acid alkyl ester polymer
with alkyl alkenoate, dialkyl alkenamide,
hydroxy-modified alkenoic acid derivative,
and sulfonic-modified alkenoic acid derivative.
(G) Polyester polyol polymer with aliphatic
isocyanate and phenol derivates.
(G) Modified vegetable oil.
(G) Di-substituted benzenedicarboxylic acid
ester.
(G) Benzenedicarboxylic acid, polymer with
decanedioic acid and dodecanedioic acid,
ethanediol, hexanedioic acid, hexanediol,
alpha-hydro-omegahydroxypoly[oxy(methyl-1,2-ethanediyl)],
isobenzofurandione,1,1′-methylenebis[4isocyanatobenzene], phenol and
trimethylbicyclo hept-2-ene.
(G) Methacrylic acid, polymer with alkyl
methacrylates and substituted acrylamide,
ammonium salt.
(G) Alkylaminium hydroxide.
(G) Di-ammonium di-carboxylate.
(S) Starch, polymer with 2-propenoic acid,
potassium salt. oxidized.
(S) Alkanes, C11-16-branched and linear.
(G) Propenoic acid alkyl ester, polymer with
alkyl acrylate, isooctyl substituted, alkyl
diol, alkyl diol propenoate, alkyloxycarbamate.
(S) Flotation additive for use in mineral proc- (G) Propanediamine, [(isoalkyloxy)propyl]
essing.
derivs., salts.
(G) Open, non dispersive use ........................ (G) Heteropolycyclic carboxylic acid, polymer
with 2-ethyl-2-(hydroxymethyl)-1,3propanediol and 4-substitutedbenzene,
substituted carbomonocycle-and alkyl-substituted carbomonocycle-blocked.
(G) A colorant for dyeing various synthetic fi- (G) Alkyl ester, 2-({4-[2-(trisubstituted
bers and fabrics. Open, non-dispersive use.
phenyl)azo]-5-acetamido-2substitutedphenyl} (substituted
alkoxy)amino).
(G) A colorant for dyeing various synthetic fi- (G) Alkyl ester, 2-({5-acetamido-2-alkoxy-4bers and fabrics. Open, non-dispersive use.
[2-(substituted-2,1-benzothiazol-3yl)azo]pheny]}(disubsti tuted)amino).
(G) Coating ..................................................... (G) Functionalized polyimide.
(G) Coating ..................................................... (G) Functionalized polyamide.
(G) A colorant for dyeing various synthetic fi- (G) 3-pyridinecarbonitrile, 1,2-dihydrobers and fabrics. Open, non-dispersive use.
trisubstituted-5-[2-(disubstituted
phenyl)azo]-2-oxo.
(G) chemical intermediate for the synthesis of (G) Alkylphenol.
another substance.
(G) Automotive engine fluid additive .............. (G) Silicophosphonate-sodium silicate.
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
27OCN1
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
74797
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
(G) Crosslinking agent ....................................
6/22/2016
9/19/2016
CBI .............................
P–16–0412 ....
6/22/2016
9/19/2016
Cardolite Corporation
P–16–0413 ....
6/22/2016
9/19/2016
Siltech LLC .................
P–16–0414 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0415 ....
P–16–0417 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–16–0418 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0419 ....
P–16–0420 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–16–0421 ....
6/22/2016
9/19/2016
Guardian Industries
Corp.
P–16–0422 ....
6/22/2016
9/19/2016
CBI .............................
P–16–0423 ....
P–16–0424 ....
P–16–0425 ....
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
CBI .............................
P–16–0426 ....
P–16–0427 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
P–16–0428 ....
P–16–0429 ....
6/22/2016
6/22/2016
9/19/2016
9/19/2016
Cardolite Corporation
CBI .............................
P–16–0430 ....
P–16–0432 ....
6/22/2016
6/22/2016
9/19/2016
9/20/2016
CBI .............................
CBI .............................
P–16–0433 ....
6/22/2016
9/20/2016
CBI .............................
P–16–0434 ....
6/22/2016
9/20/2016
CBI .............................
P–16–0435 ....
6/22/2016
9/20/2016
CBI .............................
P–16–0436 ....
6/22/2016
9/20/2016
CBI .............................
P–16–0437 ....
6/22/2016
9/20/2016
CBI .............................
P–16–0439 ....
P–16–0440 ....
P–16–0441 ....
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0411 ....
6/30/2016
6/30/2016
6/23/2016
9/28/2016
9/28/2016
9/21/2016
CBI .............................
CBI .............................
CBI .............................
P–16–0442
P–16–0443
P–16–0444
P–16–0445
P–16–0446
6/23/2016
6/23/2016
6/23/2016
6/23/2016
7/8/2016
9/21/2016
9/21/2016
9/21/2016
9/21/2016
10/6/2016
CBI .............................
CBI .............................
CBI .............................
CBI .............................
Allnex USA Inc ...........
....
....
....
....
....
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00036
Chemical identity
(G) Substituted polyalkylene
polycarbomonocyclic ester, polymer with
polyalkylene glycol, alkoxyalkanol blocked.
(G) Epoxy Coating .......................................... (G) Cashew, nutshell liq., polymer with amine
and formaldehyde.
(S) anti-fingerprint material for a metal coat(S) Siloxanes and silicones, di-me, 3ing application.
hydroxypropyl me, me 3,3,4,4,5,5,6,6,6nonafluorohexyl.
(S) Polymerized pigment used in the manu(G) Dimethylsiloxane methyl methacrylate cofacture of electronic inks.
polymer.
(G) coating for oil and gas industry ................ (G) Polyurethane.
(G) Adhesive for open, non-descriptive use ... (G) Isocyanate terminated polyurethane
resin.
(G) A colorant for dyeing various synthetic fi- (G) 6-(disubstituted-phenyl azo)-4,7bers and fabrics. Open, non-dispersive use.
disubstituted-quinolinepropanoic acid, alkyl
ester.
(G) Use as intermediate ................................. (G) N-alkyl-dialkylpiperidine.
(S) The notified substance will be used as a
(G) Dimethyl cyclohexenyl propanol.
fragrance ingredient, being blended
(mixed) with other fragrance ingredients to
make fragrance oils that will be sold to industrial and commercial customers for their
incorporation into soaps, detergents, cleaners and other similar household and consumer products.
(S) Additive to facilitate melting of sand dur(S) Flue dust, glass manufg. desulfurization
ing manufacture of glass.
definition: the dust produced from the flue
gas exhaust cleaning of a glass manufacturing process using carbonate containing
substances. it consists primarily of na2so4,
na2co3, and na4(so4)(co3).
(G) Additive for Polymers ............................... (S) 1,2- cyclohexanedicarboxylic acid, 1(phenylmethyl) ester, ester with 2,2,4trimethyl-1,3-pentanediol mono(2methylpropanoate).
(G) Intermediate .............................................. (G) Tetraalkylpiperidinium halide.
(G) Directing agent ......................................... (G) Tetraalkylpiperidinium hydroxide.
(G) A chemical reactant used in manufac(G) Amino-silane.
turing a polymer.
(G) Lubricating oil additive .............................. (G) Alkenyl bis-succinimide.
(G) adhesive ................................................... (G) Alkanedioic acid polymer with
ethenylbenzene alky-2-alkenoate,
alkanediol, .alpha.-hydro-.omega.hydroxypoly[oxyalkyl-alkanediyl)],
hydroxyalkyl-alkyl-alkenoate, and aromatic
isocyanate.
(S) Industrial ................................................... (G) Phenol, formaldehyde and amine.
(G) Universal tint paste resin having high sol- (G) Endcapped polysiloxane.
ids.
(G) Filler .......................................................... (S) Pentanedioic acid, 2-methyl(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(S) Additive for flotation products used in ore (G) Fatty acid amidoamine acetates.
processing.
(G) coloring agent ........................................... (G) Modified carbon black.
(G) coloring agent ........................................... (G) Modified carbon black.
(G) Oilfield additive ......................................... (G) Formaldehyde, reaction products with
amine-alkylamine reaction products ether
amine derivs. residues.
(G) Polymer for coatings ................................ (G) Amine salted polyurethane.
(G) Polymer for coatings ................................ (G) Amine salted polyurethane.
(G) Polymer for coatings ................................ (G) Amine salted polyurethane.
(G) Polymer for coatings ................................ (G) Amine salted polyurethane.
(S) Resin in architectural primer coatings ...... (G) Fatty acids, reaction products with
alkylamine, polymers with substituted
carbomonocycle, substituted alkylamines,
heteromonocycle and substituted
alkanoate, lactates (salts),
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
27OCN1
74798
Federal Register / Vol. 81, No. 208 / Thursday, October 27, 2016 / Notices
TABLE—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Date
received
Case No.
Projected
end date for
EPA review
Manufacturer
importer
Use(s)
Chemical identity
P–16–0447 ....
6/24/2016
9/22/2016
CBI .............................
(G) Additive for coatings .................................
P–16–0448 ....
6/27/2016
9/25/2016
CBI .............................
(G) Oil additive ................................................
P–16–0449 ....
6/27/2016
9/25/2016
CBI .............................
P–16–0453 ....
6/29/2016
9/27/2016
P–16–0454 ....
6/30/2016
9/28/2016
Miwon North America,
Inc.
CBI .............................
(S) Use per FFDCA: Cosmetics; (S) Use per
TSCA: Fragrance uses; scented papers,
detergents, candles etc.
(S) Resin for Industrial Coating ......................
SN–03–0015 ..
6/22/2016
9/19/2016
Degussa Corporation
SN–03–0016 ..
6/22/2016
9/19/2016
Degussa Corporation
SN–12–0005 ..
SN–15–0004 ..
6/22/2016
6/22/2016
9/19/2016
9/19/2016
CBI .............................
CBI .............................
SN–15–0009
SN–16–0005
SN–16–0009
SN–16–0011
..
..
..
..
6/22/2016
6/22/2016
6/22/2016
6/22/2016
9/19/2016
9/19/2016
9/19/2016
9/219/2016
SN–16–0012 ..
6/22/2016
9/20/2016
CBI
CBI
CBI
CBI
.............................
.............................
.............................
.............................
CBI .............................
Authority: 15 U.S.C. 2601 et seq.
(G) material for highly dispersive use in consumer products.
(S) Anti-graffiti systems; surface treatment of
fabrics and porous mineral surfaces.
(S) Anti-soiling surface treatment of glass
and ceramic surfaces.
(G) Additive, open, non-dispersive .................
(S) Slurry dispersion to be blended with coating compound and applied to fabric.
(G) Polymer additive .......................................
(G) Abrasion resistant applications ................
(G) Additive for household products. ..............
(S) Component of infrared absorption material.
(S) Additive for flotation products; (S) Chemical intermediate.
Environmental Protection
Agency (EPA).
ACTION: Notice of availability.
This CTG document is effective
October 27, 2016.
ADDRESSES: The final ‘‘Control
Techniques Guidelines for the Oil and
Natural Gas Industry’’ document is
available primarily via the Internet at
https://www.epa.gov/airquality/
oilandgas/ or https://
www.epa.gov/laws-regulations/
significant-guidance-documents-air or
the public docket at https://
www.regulations.gov, Docket ID No.
EPA–HQ–OAR–2015–0216.
FOR FURTHER INFORMATION CONTACT: Ms.
Charlene Spells, U.S. Environmental
Protection Agency, Office of Air Quality
Planning and Standards, Sector Policies
and Programs Division (E143–05),
Research Triangle Park, NC 27711;
telephone number: (919) 541–5255; fax
number: (919) 541–3470; email:
spells.charlene@epa.gov.
SUPPLEMENTARY INFORMATION:
The Environmental Protection
Agency (EPA) is announcing the
availability of a final document titled,
‘‘Control Techniques Guidelines for the
Oil and Natural Gas Industry’’ (EPA
453/B–16–001). This Control
Techniques Guidelines (CTG) document
provides state, local, and tribal air
agencies (air agencies) information to
assist them in determining reasonably
available control technology (RACT) for
volatile organic compound (VOC)
emissions from select oil and natural gas
industry emission sources.
Information About the Document
Section 172(c)(1) of the Clean Air Act
(CAA) provides that State
Implementation Plans (SIP) for
nonattainment areas must include
RACT, including RACT for existing
sources of emissions. Section
182(b)(2)(A) of the CAA requires that for
areas designated nonattainment for an
ozone national ambient air quality
standard (NAAQS) and classified as
Moderate, states must revise their SIP to
include provisions to implement RACT
for each category of VOC sources
DATES:
Dated: October 21, 2016.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2016–26021 Filed 10–26–16; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OAR–2015–0216; FRL–9954–57–
OAR]
RIN 2060–ZA22
Release of Final Control Techniques
Guidelines for the Oil and Natural Gas
Industry
AGENCY:
sradovich on DSK3GMQ082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:43 Oct 26, 2016
Jkt 241001
PO 00000
Frm 00037
Fmt 4703
Sfmt 4703
(G) Alkyl alkenoate, dialkyl alkanediyl, polymer with alkyl alkenoate, substituted
carbomonocycle, alkyl alkenoate and
heteromonocycle alkyl alkenoate, diazene
bis alkyl heteromonocycle initiated.
(G) Metal salts branched alkyl substituted
carbomonocycle with substituted alkyl
carbomonocycle complexes.
(S) 2,7-decadienal, (2e,7z)-
(G) Polyester acrylate.
(G) Trisubstituted alkenol.
(G) Fluoro/amino silane mixture.
(S) Silane, triethoxy(3,3,4,4,5,5,6,6,7,7,8,8,8tridecafluorooctyl)(G) Multi-walled carbon nanotubes.
(G) Brominated compounds.
(G)
(G)
(G)
(G)
Fatty acid amide.
Potassium titanate.
Trialkylol homopolymer.
Cesium tungstate.
(G) Fatty acid amidoamine.
covered by a CTG document issued
between November 15, 1990, and the
date of attainment. CAA section 182(c)
through (e) applies this requirement to
states with areas designated
nonattainment for an ozone NAAQS
classified as Serious, Severe, and
Extreme.
The CAA also imposes the same
requirement on states in Ozone
Transport Regions (OTR). Specifically,
CAA section 184(b) provides that states
in the OTR must revise their SIP to
implement RACT with respect to all
sources of VOC in the state covered by
a CTG document issued before or after
November 15, 1990. CAA section 184(a)
establishes a single OTR comprised of
Connecticut, Delaware, Maine,
Maryland, Massachusetts, New
Hampshire, New Jersey, New York,
Pennsylvania, Rhode Island, Vermont,
and the Consolidated Metropolitan
Statistical Area (CMSA) that includes
the District of Columbia.
The EPA defines RACT as ‘‘the lowest
emission limitation that a particular
source is capable of meeting by the
application of control technology that is
reasonably available considering
technological and economic feasibility’’
(44 FR 53761, September 17, 1979). In
subsequent notices, the EPA has
addressed how states can meet the
RACT requirements of the CAA. The
EPA developed this CTG document to
provide air agencies information to
assist them in determining what types of
E:\FR\FM\27OCN1.SGM
27OCN1
Agencies
[Federal Register Volume 81, Number 208 (Thursday, October 27, 2016)]
[Notices]
[Pages 74784-74798]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-26021]
[[Page 74784]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0082; FRL-9952-62]
Certain New Chemicals; Receipt and Status Information for June
2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
Premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from June 22, 2016 to June 30, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before November 28, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0025, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the agency taking?
This document provides receipt and status reports, which cover the
period from June 22, 2016 to June 30, 2016, and consists of the PMNs
and TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
President Obama signed new TSCA legislation on June 22, 2016. TSCA
subsection 5(a) notices, which were submitted prior to signature of the
law, but were still within the review period on June 22 (i.e.,
typically the 90-day review period), will have determinations made in
accordance with the new law. EPA views all section 5(a) notices that
were within the notice period, as of June 22, 2016, as having been
refiled on that date, thereby restarting the 90-day review clock on
June 22, 2016. This follows from the manner in which the TSCA
legislation defines the ``applicable review period,'' a statutory
phrase that did not exist before the amendments to TSCA. New TSCA
section 5(i)(3) states that the applicable review period ``means the
period starting on the date the Administrator receives a notice under
subsection (a)(1).'' EPA interprets this cross-reference as a reference
to TSCA subsection (a)(1), as amended. Thus, in the case of a notice
submitted prior to the date of enactment, the earliest possible date on
which that notice could be viewed as submitted ``under subsection
(a)(1),'' is June 22, 2016, the first date on which that subsection was
in legal effect.
III. What is the agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a notice before initiating the activity. TSCA
furthermore prohibits such manufacturing or processing from commencing
until EPA has conducted a review of the notice, made an appropriate
determination on the notice, and taken such actions as are required in
association with that determination (15 U.S.C. 2604(a)(1)(B)(ii)).
Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon
application, to manufacture (includes import) or process a new chemical
substance, or a chemical substance subject to a significant new use
rule (SNUR) issued under TSCA section 5(a), for ``test marketing''
purposes, which is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
[[Page 74785]]
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 349 PMNs received by EPA during this period, the table
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; the
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table--PMNs Received From June 1, 2016 to June 30, 2016
----------------------------------------------------------------------------------------------------------------
Projected
Date end date Manufacturer
Case No. received for EPA importer Use(s) Chemical identity
review
----------------------------------------------------------------------------------------------------------------
P-09-0378........... 6/22/2016 9/19/2016 CBI................. (G) Solvent......... (G)
Hydrofluorocarbon.
P-09-0629........... 6/22/2016 9/19/2016 Santolubes, LLC..... (S) This substance (S) Bis(para-
will be a raw phenoxyphenyl)ether
material for a .
flame retardant
product used in the
plastics.
P-10-0017........... 6/22/2016 9/19/2016 CBC (America) (G) Sealant (S) Phenol, 4,4'-(1-
Corporation. application. methylethylidene)bi
s-, polymer with 2-
(chloromethyl)oxira
ne, hydrogenated.
P-10-0494........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate (G) Polyphenol
chemical product. ether.
P-10-0542........... 6/22/2016 9/19/2016 CBI................. (G) Used as an (G) Amide,
ingredient in polyprotic acid.
manufacture of a
polymer binder
meant to adhere
glass fibers
together.
P-11-0148........... 6/22/2016 9/19/2016 Ineos Oligomers..... (G) Industrial (S) Hydrocarbons,
applications. c4, 1,3-butadiene-
free, polymd.,
triisobutylene
fraction,
hydrogenated.
P-11-0593........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Formaldehydem
polyurethane foam. reaction products
with alkylphenol
and diethanolamine,
alkoxy alkylated.
P-11-0647........... 6/22/2016 9/19/2016 CBI................. (G) Water and oil (G)
repellent. Perfluoroalkylethyl
methacrylate
copolymer.
P-12-0085........... 6/22/2016 9/19/2016 CBI................. (G) Finishing agent (G) Substituted-
for textile. dioxaphosphorinane,
2-([1,1'-biphenyl]-
2-yloxy)-5,5-
dialkyl-, 2-oxide.
P-12-0089........... 6/22/2016 9/19/2016 BrueggeMann Chemical (G) Zinc is a (S) Carbonic acid,
U.S., Inc. natural essential zinc salt, basic.
element, which is
needed for the
optimal growth and
development of all
living organisms
including man all
living organisms
have homeostasis
mechanisms that
actively regulate
zinc uptake and
absorption
excretion from the
body due to this
regulations zinc
and zinc compounds
do not
bioaccumulate or
biomagnify most
common technical
function of
substance (what it
does) food/
feedstuff additives
process regulators
other than
polymerisation or
vulcanisation
processes
lubricants and
lubricant additives
laboratory
chemicals ph-
regulating agents
fertilizers.
P-12-0277........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0278........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0279........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0280........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0281........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0282........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0283........... 6/22/2016 9/19/2016 CBI................. (G) Platicizer and (G) Chloro alkanes.
lubricant with
flame retardant
properties.
P-12-0284........... 6/22/2016 9/19/2016 CBI................. (G) Metal working (G) Chloro alkanes.
fluid additive.
P-12-0291........... 6/22/2016 9/19/2016 CBI................. (G) Additive, open, (G) Fluoroalkyl
non-dispersive use. modified
polydimethylsiloxan
e.
P-12-0399........... 6/22/2016 9/19/2016 CBI................. (G) Paper treatment. (G)
Perfluoroalkylethyl
methacrylate
copolymer, sodium
salt.
P-12-0433........... 6/22/2016 9/19/2016 Ineos Chlor Americas (G) Additive........ (S) Alkanes, c18-20,
chloro.
P-12-0453........... 6/22/2016 9/19/2016 Ineos Chlor Americas (G) Additive........ (S) Alkanes, c14-17,
chloro.
P-12-0505........... 6/22/2016 9/19/2016 Ineos Chlor Americas (G) Additive........ (S) Alkanes, c22-30,
chloro.
P-13-0021........... 6/22/2016 9/19/2016 CBI................. (S) Surface (G)
protection agent Perfluoroacrylate
for use in building polymer.
materials.
P-13-0022........... 6/22/2016 9/19/2016 CBI................. (S) Surface (G)
protection agent Perfluoroacrylate
for use in building polymer.
materials.
P-13-0287........... 6/22/2016 9/19/2016 CBI................. (G) Curing agent; (G) Cyanoethylated
starting material diamine.
for curing agent.
P-13-0307........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Substituted
manufactured carbocycle, n-[[[4-
consumer article-- [[(4-substituted
contained use. carbocyclic)amino]s
ulf
onyl]carbocyclic]am
ino]carbonyl]-4-
methyl-
P-13-0323........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Phosphonic acid,
foam applications. [1[(5,5-dialkyl-2-
substituted-
substituted
heteromonocycle]-1-
alkyl]-, dialkyl
ester.
[[Page 74786]]
P-13-0377........... 6/22/2016 9/19/2016 CBI................. (G) Water and oil (G)
repellent. Perfluoroalkylethyl
methacrylate
copolymer.
P-13-0382........... 6/22/2016 9/19/2016 CBI................. (G) Plastics........ (G) Castor oil,
reaction products
with an alcohol
amine.
P-13-0520........... 6/22/2016 9/19/2016 Alberdingk Boley Inc (S) Coatings for (G) Aromatic
wood metal and dicarboxylic acid,
plastic. polymer with
cycloalkanemethanol
, alkanediamine,
alkanedioic acid,
hydroxy-2-
(hydroxyalkyl)-2-
alkylcarboxylic
acid,
methylenebis[isocya
nat ocycloalkane]
and
(methylethylidene)b
is)phenyleneoxy)]bi
s[alkan ol], compd.
with dialkylamino
ethanol.
P-13-0521........... 6/22/2016 9/19/2016 Alberdingk Boley, (S) Coatings for (G) Aromatic
Inc. wood metal and dicarboxylic acid,
plastic. polymer with
alkanediamine,
alkane dioic acid,
alkanediol, hydroxy-
2-(hydroxymethyl)-2-
alkyl carboxylic
acid, methylenebis
[isocyanatocycloalk
ane] and
[(alkylethylidene)
bis(phenyleneoxy)]b
is[alkanol], compd.
with
dialkylethanamine.
P-13-0720........... 6/22/2016 9/19/2016 Nano-C, Inc......... (S) Additive for (G) Single-walled
fibers in fabrics; carbon nanotubes.
(S) Additive for
fibers in
structural and
electrical
applications; (S)
Additive for
transparency and
conductivity in
electronic devices;
(S) Additive in
lubricants and
grease to improve
wear resistance;
(S) Additive to
improve the
strength and
durability of
materials and
batteries; (S)
Catalyst support
for use in fuel
cells; (S) Coating
additive to improve
corrosion
resistance of
metals; (S) Use as
a nonporous network
in gas diffusion
layers; (S) Use as
a semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S) Use as
an
electromechanical
switch in
electronic
circuitry and
devices; (S) Use in
film laminates to
improve structural,
electrical, or
electrochemical
properties of
composite; (S) Use
in separation of
chemicals; (S) Use
with materials to
improve mechanical
properties or
electrical
conductivities.
P-13-0883........... 6/22/2016 9/19/2016 CBI................. (G) Corrosion (G) Fatty acids,
inhibitor for down- tall oil, reaction
hole well treatment products with
and pipelines used polyamine, 2-
in the oil and gas mercaptoacetate.
industry.
P-14-0053........... 6/22/2016 9/19/2016 Takasago............ (S) Fragrance in (S) 2-pentanone, 3-
deodorants and methyl-5-(2,2,3-
cosmetics; (S) trimethylcyclopenty
Fragrance in fine l)-
fragrance; (S)
Fragrance in
household products
such as laundry;
detergents and air
fresheners; (S)
Fragrance in
shampoos and body
washes.
P-14-0055........... 6/22/2016 9/19/2016 Takasago............ (S) Fragrance in (S)
deodorants and Cyclohexanecarboxyl
cosmetics; (S) ic acid, 2,2,6-
Fragrance in fine trimethyl-,2-propen-
fragrance; (S) 1-yl ester.
Fragrance in
household products
such as laundry
detergents and air;
Fresheners; (S)
Fragrance in
shampoos, body wash.
P-14-0073........... 6/22/2016 9/19/2016 CBI................. (G) Manufacturing (G) Fluorinated
intermediate. alcohol.
P-14-0093........... 6/22/2016 9/19/2016 CBI................. (G) Resin for (G) Phenol, bis
coatings. alkylalylidene-,
polymer with
haloalkyl
hetermonocycle,
alkylhexanoate,
reaction products
with substituted
amines.
P-14-0094........... 6/22/2016 9/19/2016 CBI................. (G) Crosslinking (G) Substituted
agent. polyalkylene
polycarbomonocyclic
ester, 2-
alkoxyethanol- and
dialkylene glycol
alkyl ether-
blocked.
P-14-0246........... 6/22/2016 9/19/2016 Shell Chemical, LP.. (S) Cleaning adn (S) 2-propanol, 1-
inks; (S) ethoxy-, 2-acetate.
Electronics; (S)
Other solvents; (S)
Paint and coating.
P-14-0266........... 6/22/2016 9/19/2016 CBI................. (G) Functions as an (G) Tall oil fatty
oil-soluble acid
corrosion inhibitor diethylenetriamine
for use in oil and compds. with
gas wells and substituted
pipelines. polyethylene glycol
ether.
P-14-0314........... 6/22/2016 9/19/2016 CBI................. (G) Industrial flame (G) Poly aliphatic
retardant. phosphate.
P-14-0321........... 6/22/2016 9/19/2016 CBI................. (G) Site-limited (G)
isolated and Hydrochlorofluoropr
recycled op ene.
intermediate.
P-14-0323........... 6/22/2016 9/19/2016 CBI................. (G) Site-limited, (G)
isolated and Hydrochlorofluoropr
recycled op ene.
intermediate.
P-14-0472........... 6/22/2016 9/19/2016 CBI................. (G) Site Controlled (G) Polyphosphoric
Intermediate. acids, 2-[alkyl-1-
oxo-2-propen-1-
yl)oxy]ethyl
esters, compds.
with n-
(aminoiminomethyl)u
re a.
P-14-0481........... 6/22/2016 9/19/2016 CBI................. (G) Base material in ((G) Alkene,
industrial rubber hexasubstituted,
synthesis; (G) Base telomer with
material in disubstituted
industrial rubber alkene and
synthesis. polysubstituted
alkane.
P-14-0482........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Organic salt.
chemical.
P-14-0485........... 6/22/2016 9/19/2016 CBI................. (G) Fuel cell (G) Rare earth
component. oxide.
[[Page 74787]]
P-14-0496........... 6/22/2016 9/19/2016 CBI................. (G) Paper additive.. (G) Polyphosphoric
acids, 2-[(alkyl-1-
oxo-2-propen-1-
yl)oxy]ethyl
esters, compds.
with n-
(aminoiminomethyl)u
re a, polymers with
bu acrylate, n-
(hydroxymethyl)-2-
propenamide and
styrene.
P-14-0574........... 6/22/2016 9/19/2016 CBI................. (G) Open non- (G) Fatty acid
dispersive use; esters with polyol.
dispersive use.
P-14-0627........... 6/22/2016 9/19/2016 CBI................. (S) Solvent in a (G) Cyclic amide.
variety of
applications;
laboratory chemical/
solvent; cleaning
agent.
P-14-0630........... 6/22/2016 9/19/2016 CBI................. (S) Pigment for (S) Bismuth bromide
liquid coatings iodide oxide.
solvent based
system; (S) Pigment
for polymer
materials; (S)
Pigment for powder
coatings.
P-14-0636........... 6/22/2016 9/19/2016 CBI................. (S) Functional resin (G) Chloroalkane,
coating/protective polymer with
coating; functional chloroalkoxyalkane
resin insulating and sodium sulfide
glass sealant; (na2sx).
functional resin
aerospace sealant.
P-14-0637........... 6/22/2016 9/19/2016 CBI................. (G) Textile (G)
treatment. Perfluoroalkylethyl
methacrylate
copolymer.
P-14-0642........... 6/22/2016 9/19/2016 CBI................. (S) Low foam (S) Oxirane, 2-ethyl-
surfactant for the , polymer with
autodishwasher oxirane, mono-c12-
market; low foam 16-alkyl ethers.
surfactant for the
household cleaning
market.
P-14-0683........... 6/22/2016 9/19/2016 Qualice, LLC........ (S) Extreme pressure (S) Tetradecane,
additive in chloro derivatives.
lubricants; (S)
Flame retardant in
rubber products.
P-14-0684........... 6/22/2016 9/19/2016 Qualice, LLC........ (S) Extreme pressure (S) Alkanes, c14-16,
additive in chloro.
lubricants; (S)
Flame retardant in
rubber products.
P-14-0758........... 6/22/2016 9/19/2016 CBI................. (G) Urethane foam... (G) Polyamine-based
polyol.
P-14-0829........... 6/22/2016 9/19/2016 CBI................. (S) Surfactant for (G)
use in paints, Perfluropolyethylen
coatings, inks, e glycol polymer.
waxes, detergents,
polishes,
adhesives, and
lubricants.
P-14-0865........... 6/22/2016 9/19/2016 CBI................. (G) Isolated (G) Aromatic amide
intermediate. oxime.
P-15-0029........... 6/22/2016 9/19/2016 Maroon, Inc......... (S) Antioxidant for (S) 2,4,8,10-
plastics. tetraoxa-3,9-
diphosphaspiro[5.5]
und ecane,3,9-bis[2-
(1-methyl-1-
phenylethyl)-4-
(1,1,3,3-
tetramethylbutyl)ph
eno xy]-
P-15-0106........... 6/22/2016 9/19/2016 CBI................. (G) Mining and fuel (G) Alkene reaction
additive. and distillation by-
products and
residues.
P-15-0114........... 6/22/2016 9/19/2016 CBI................. (S) Dielectric (S) 2-butanone,
medium; heat 1,1,1,3,4,4,4-
transfer. heptafluoro-3-
(trifluoromethyl)-
P-15-0123........... 6/22/2016 9/19/2016 CBI................. (S) Fragrance (G) Alkyl
ingredient for use substituted 5-
in fragrances for benzofuranol.
soaps, detergents,
cleaners and other
household products.
P-15-0310........... 6/22/2016 9/19/2016 Sasol Chemicals (S) Lubricant in (S) 1,2,4-
(USA), LLC. special chain oils benzenetricarboxyli
for conveyor belts. c acid, mixed decyl
and octyl
triesters.
P-15-0320........... 6/22/2016 9/19/2016 CBI................. (S) Dielectric (S) Propanenitrile,
medium. 2,3,3,3-tetrafluoro-
2-(trifluoromethyl)-
P-15-0353........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant (G) Chlorinated
additive. complex ester.
P-15-0357........... 6/22/2016 9/19/2016 CBI................. (G) Raw material for (G)
thermal paper Benzenesulfonamide,
manufacture. phenyl substituted
carbonyl.
P-15-0372........... 6/22/2016 9/19/2016 CBI................. (G) Surfactant...... (G) 1,3-
propanediamine, n1-
alky,-,
carboxymethyl
derivs`
P-15-0377........... 6/22/2016 9/19/2016 PCCR USA, Inc....... (S) Plasticizer in (S) 1,2,4-
automotive parts; benzenetricarboxyli
(S) Plasticizer in c acid, 1,2,4-
pvc cables. trionyl ester.
P-15-0386........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient for (S) 2-cyclohexen-1-
consumer products, ol, 2-methyl-5-(1-
dispersive use. methylethenyl)-, 1-
acetate, (1r,5r)-
P-15-0387........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Modified
coating polymer. fluoroalkyl
acrylate copolymer.
P-15-0392........... 6/22/2016 9/19/2016 Polynt S.P.A........ (S) Plasticizer for (S) 1,2,4-
pvc powders for car benzenetricarboxyli
interiors c acid, mixed decyl
manufacturing; and octyl
plasticizer for pvc triesters.
compounds for
cables.
P-15-0419........... 6/22/2016 9/19/2016 CBI................. (G) Flame retardant ((G) 2,2-bis[3',5'-
material. dihalo-4'-
haloalkyloxy
carbomonocycle]
propane.
P-15-0433........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant (G) Chlorinated
additive. complex ester.
P-15-0436........... 6/22/2016 9/19/2016 CBI................. (G) Stain block, (G) Anionic aqueous
surfactant, and fluorochemical
antiblock agent. dispersion.
P-15-0442........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0443........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0444........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0445........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0446........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0447........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0450........... 6/22/2016 9/19/2016 CBI................. (G) Mixed metal (G) Lithium mixed
oxide for batteries. metal oxide.
P-15-0469........... 6/22/2016 9/19/2016 CBI................. (G) Surfactant...... (G) Glycerides, c8-
18 and c18
unsaturated, from
fermentation.
P-15-0474........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-,
ethyl ester.
P-15-0475........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-,
methyl ester.
P-15-0476........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-, 1-
methylethyl ester.
P-15-0477........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-,
tetradecyl ester.
P-15-0478........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-,
2,2'-
[ethanediylbis(oxy-
2,1-ethanediyl)
ester.
[[Page 74788]]
P-15-0479........... 6/22/2016 9/19/2016 xF Technologies..... (S) Organic solvent; (S) 2-
(S) Plasticizer. furancarboxylic
acid, 5-methyl-,
2,2'-[oxybis(methyl-
2,1-ethanediyl)]
ester.
P-15-0481........... 6/22/2016 9/19/2016 CBI................. (S) Curing agent for (G) Benzaldehyde,
epoxy coating reaction products
systems. with
polyalkylenepolyami
ne s, hydrogenated,
reaction products
with alkyl ketone.
P-15-0487........... 6/22/2016 9/19/2016 Daewoo International (S) Additive for (G) Multi-walled
USA Corp. fibers in carbon nanotubes.
structural and
electrical
applications;
additive for fibers
in fabrics and
textiles; (S)
Additive for heat
transfer and
thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S)
Additive for weight
reduction in
materials; (S) Use
as a catalyst
support in chemical
manufacturing;
Coating additive to
improve corrosion
resistance or
conductive
properties; (S) Use
as a filter
additive to remove
nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity; (S)
Use as a heat-
generating element
in heating devices
and materials; (S)
Use as an additive
for electro-static
discharge (esd) in
electronic devices,
electronics, and
materials; (S) Use
as an additive for
electromagnetic
interface (emi)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices;
(S) Use as an
additive to improve
conductivity in
electronic
circuitry energy
storage systems,
and devices; use as
an electron emitter
for lighting and x-
ray sources. (S)
Use with materials
to improve
mechanical
properties or
electrical
conductivities.
P-15-0488........... 6/22/2016 9/19/2016 Daewoo International (S) Additive for (G) Multi-walled
USA Corp. fibers in carbon nanotubes.
structural and
electrical
applications;
additive for fibers
in fabrics and
textiles; (S)
Additive for heat
transfer and
thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S)
Additive for weight
reduction in
materials; (S) Use
as a catalyst
support in chemical
manufacturing;
coating additive to
improve corrosion
resistance or
conductive
properties; (S) Use
as a filter
additive to remove
nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity; (S)
Use as a heat-
generating element
in heating devices
and materials; (S)
Use as an additive
for electro-static
discharge (esd) in
electronic devices,
electronics, and
materials; (S) Use
as an additive for
electromagnetic
interface (emi)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices;
(S) Use as an
additive to improve
conductivity in
electronic
circuitry, energy
storage systems,
and devices; use as
an electron emitter
for lighting and x-
ray sources. (S)
Use with materials
to improve
mechanical
properties or
electrical
conductivities.
[[Page 74789]]
P-15-0489........... 6/22/2016 9/19/2016 Daewoo International (S) Additive for (G) Multi-walled
USA Corp. fibers in carbon nanotubes.
structural and
electrical
applications;
additive for fibers
in fabrics and
textiles; (S)
Additive for heat
transfer and
thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S)
Additive for weight
reduction in
materials; (S) Use
as a catalyst
support in chemical
manufacturing;
coating additive to
improve corrosion
resistance or
conductive
properties; (S) Use
as a filter
additive to remove
nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity; (S)
Use as a heat-
generating element
in heating devices
and materials; (S)
Use as an additive
for electro-static
discharge (esd) in
electronic devices,
electronics, and
materials. (S) Use
as an additive for
electromagnetic
interface (emi)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices;
(S) Use as an
additive to improve
conductivity in
electronic
circuitry energy
storage systems,
and devices; use as
an electron emitter
for lighting and x-
ray sources. (S)
Use with materials
to improve
mechanical
properties or
electrical
conductivities.
P-15-0490........... 6/22/2016 9/19/2016 Daewoo International (S) Additive for (G) Multi-walled
USA Corp. fibers in carbon nanotubes.
structural and
electrical
applications;
additive for fibers
in fabrics and
textiles; (S)
Additive for heat
transfer and
thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S)
Additive for weight
reduction in
materials; (S) Use
as a catalyst
support in chemical
manufacturing;
coating additive to
improve corrosion
resistance or
conductive
properties; (S) Use
as a filter
additive to remove
nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity; (S)
Use as a heat-
generating element
in heating devices
and materials. (S)
Use as an additive
for electro-static
discharge (esd) in
electronic devices,
electronics, and
materials; (S) Use
as an additive for
electromagnetic
interface (emi)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices;
(S) Use as an
additive to improve
conductivity in
electronic
circuitry, energy
storage systems,
and devices; use as
an electron emitter
for lighting and x-
ray sources; (S)
Use with materials
to improve
mechanical
properties or
electrical
conductivities.
[[Page 74790]]
P-15-0491........... 6/22/2016 9/19/2016 Daewoo International (S) Additive for (G) Multi-walled
USA Corp. fibers in carbon nanotubes.
structural and
electrical
applications;
additive for fibers
in fabrics and
textiles; (S)
Additive for heat
transfer and
thermal emissions
in electronic
devices and
materials; use as a
semi-conductor,
conductive, or
resistive element
in electronic
circuitry and
devices; (S)
Additive for weight
reduction in
materials; (S) Use
as a catalyst
support in chemical
manufacturing;
coating additive to
improve corrosion
resistance or
conductive
properties; (S) Use
as a filter
additive to remove
nanoscale
materials; use as a
semi-conducting
compounding
additive for high-
voltage cable; use
as an additive for
super-
hydrophobicity; (S)
Use as a heat-
generating element
in heating devices
and materials; (S)
Use as an additive
for electro-static
discharge (esd) in
electronic devices,
electronics, and
materials; (S) Use
as an additive for
electromagnetic
interface (emi)
shielding in
electronic devices;
additive for
electrodes in
electronic
materials and
electronic devices;
(S) Use as an
additive to improve
conductivity in
electronic
circuitry, energy
storage systems,
and devices; use as
an electron emitter
for lighting and x-
ray sources. (S)
Use with materials
to improve
mechanical
properties or
electrical
conductivities.
P-15-0506........... 6/22/2016 9/19/2016 CBI................. (G) Component in (G) Alkyl phosphate
cleaning ammonium salt.
formulation.
P-15-0525........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0526........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0527........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0528........... 6/22/2016 9/19/2016 CBI................. (G) Catalyst........ (G) Rare earth doped
zirconium oxide.
P-15-0540........... 6/22/2016 9/19/2016 CBI................. (S) Chemical (S) Alcohols, c10-
intermediate in the 16, propoxylated.
production of
poly[oxy(methyl-1,2-
ethanediyl)],a-
sulfo-w-hydroxy-c10-
16-alkyl ethers cas
# 1497417-15-8, and/
or sodium salt of
same.
P-15-0562........... 6/22/2016 9/19/2016 CBI................. (S) Pigment for (G) Substituted
automotive coatings alkylsilanes,
to be used in reaction products
automotive oem and with a mixture of
refinish. metal oxides.
P-15-0580........... 6/22/2016 9/19/2016 CBI................. (G) Coating......... (G) Cycloaliphatic
epoxy.
P-15-0584........... 6/22/2016 9/19/2016 The Lewis Chemical (S) Foaming agent in (S) Amides, coco,
Company. industrial or hard n,n-bis(2-
surface cleaners. hydroxypropyl).
P-15-0597........... 6/22/2016 9/19/2016 CBI................. (S) Dispersing agent (G) Polyethylene
for use in paints, glycol alkyl ether,
pigments, and sodium salt.
coatings..
P-15-0632........... 6/22/2016 9/19/2016 CBI................. (S) Salt for polymer (G) Mixed amine
salt.
P-15-0633........... 6/22/2016 9/19/2016 Firmenich, Inc...... (G) As part of a (S) 1(2h)-
fragrance formula naphthalenone,4-
(dispersive use). ethyloctahydro-8-
methyl.
P-15-0653........... 6/22/2016 9/19/2016 CBI................. (G) Coating......... (G) Cycloaliphatic
epoxide.
P-15-0697........... 6/22/2016 9/19/2016 CBI................. (S) Boron-free, (G) Alkyl
ferrous corrosion alkylenetriamine
inhibitor for water- compd. with alkanol
based metalworking ethoxylate
fluids. phosphate.
P-15-0705........... 6/22/2016 9/19/2016 CBI................. (S) Alkylarylamine (G) Alkylarylamine.
used as an additive
and octane booster
in aviation fuels.
P-15-0706........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient for (G) Mixture of
multipurpose aliphatic n-alkyl
exterior coatings. ureas containing
substituted
cyclohexyl and
terminal
alkoxysilane
groups.
P-15-0707........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient for (G) Mixture of
multipurpose aliphatic n-alkyl
exterior coatings. ureas containing
substituted
cyclohexyl and
terminal
alkoxysilane
groups.
P-15-0719........... 6/22/2016 9/19/2016 CBI................. (G) Flame retardant (S) Poly (1,4-
synergist. diisopropyl
benzene).
P-15-0720........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0721........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0722........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0723........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0724........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0725........... 6/22/2016 9/19/2016 CBI................. (S) Polyurethane (G) Aliphatic
prepolymer. polyester polyol.
P-15-0726........... 6/22/2016 9/19/2016 CBI................. (S) Co-polymer for (G)
use in adhesives Triethoxysilylalkox
and sealant y polyalkylene
formulations. glycol.
P-15-0734........... 6/22/2016 9/19/2016 CBI................. (S) Wastewater heavy (G) Polymeric
metals removal. sulfide.
P-16-0017........... 6/22/2016 9/19/2016 Alcoa, Inc.......... (S) Blast suppressor (G) Mixed metals
for nitrogen based layered double
fertilizers. hydroxide.
P-16-0043........... 6/22/2016 9/19/2016 Akzo Nobel Surface (S) Polymeric (S) Amines, tallow
Chemistry, LLC. corrosion inhibitor alkyl, ethoxylated,
downhole oilfield. polymers with
adipic acid.
P-16-0054........... 6/22/2016 9/19/2016 Blaser Swisslube, (S) Metal working (S) Phosphoric acid,
Inc. fluid component. mixed 2-hexlydecyl
and 2-hexyldodecyl
and 2-octyldecyl
and 2-octyldodecyl
mono- and diesters.
P-16-0086........... 6/22/2016 9/19/2016 CBI................. (G) Coating (G) Mixed metal
component. oxide-halide
complex.
[[Page 74791]]
P-16-0092........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Polymeric
coatings, open non- polyamine.
dispersive use.
P-16-0093........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient for (S) 2-cyclohexen-1-
consumer products, one, 2-methyl-5-
dispersive use. propyl-
P-16-0099........... 6/22/2016 9/19/2016 CBI................. (G) Aqueous coating. (G) Polyethylene
glycol polymer with
aliphatic
polycarbodiimide,
bis(alkoxysilylprop
yl)amine blocked.
P-16-0119........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Chlorofluorocarbon.
P-16-0120........... 6/22/2016 9/19/2016 The Shepherd Color (G) Pigment for anti- (S) Aluminum
Co. corrosive paints. vanadium zinc
hydroxide oxide.
P-16-0122........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Chlorofluorocarbon.
P-16-0125........... 6/22/2016 9/19/2016 CBI................. (G) Resin for (G) Alkoxy alkyl
coatings. substituted
alkanoic acid,
ion(1-), salts with
substituted
carbomonocycle
substituted
heteromonocyclic
polymer ester with
substituted
carbomonocycle
alkyl ester-alkyl
substituted alkanol
reaction products.
P-16-0127........... 6/22/2016 9/19/2016 CBI................. (S) Flotation of (G) Dialkyl ether
silica from iron ammonium salts.
ore and selected
non-ferrous
minerals.
P-16-0143........... 6/22/2016 9/19/2016 CBI................. (G) Chemical (G)
intermediate. Haloalkylfurancarbo
xal dehyde.
P-16-0150........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Chlorofluorocarbon.
P-16-0151........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Perfluoropolyether
halide.
P-16-0152........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Perfluoropolyether
aryl.
P-16-0153........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant (G) Substituted aryl-
additive. perfluoropolyether.
P-16-0154........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant (G) Sulfonated
additive. perfluoropolyether
aromatic transition
metal salt.
P-16-0155........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant (G) Sulfonated
additive. perfluoropolyether
aryl alkali metal
salt.
P-16-0157........... 6/22/2016 9/19/2016 CBI................. (G) Fabric Treatment (G) Fluorinated
polyurethane.
P-16-0164........... 6/22/2016 9/19/2016 CBI................. (G) Processing aid.. (G) Thiocarbamic
acid derivative.
P-16-0165........... 6/22/2016 9/19/2016 Dura Chemicals, Inc. (S) Ferrous (S) Iron, 2-
propionate is a ethylhexanoate
component in a propionate
metal organic complexes.
product that will
be used in paint
and ink driers, UPR
promoters, lube/
grease additives,
fuel additives,
polymerization
catalysts,
specialty
petrochemical
catalysts, etc.,
the amount of the
ferrous propionate
will be well under
1% in any final
product; (S) iron,2-
ethylhexanoate
propionate
complexes is a
component in a
metal organic
product that will
be used in paint
and ink driers, UPR
promoters, lube/
grease additives,
fuel additives,
polymerization
catalysts,
specialty
Petrochemical
catalysts, etc.,
the amount of the
Iron, 2-
ethyhexanoate
propionate
complexes will be
well under 1% in
any final product.
P-16-0167........... 6/22/2016 9/19/2016 CBI................. (S) Light stabilizer (G) Hindered amine
for plastic alkyl ester
articles. compounds.
P-16-0180........... 6/22/2016 9/19/2016 CBI................. (S) Component of (G) Isocyanic acid,
industrial and polymethylenepolyph
maintenance en ylene ester,
coatings. polymer with a-
hydro-w-
hydroxypoly[oxy(met
h yl-1,2-
ethanediyl)] and
alkylene oxide
polymer, alkylamine
initiated.
P-16-0186........... 6/22/2016 9/19/2016 CBI................. (G) Surfactant...... (G) Sodium branched
chain alkyl
hydroxyl and
branched chain
alkenyl sulfonates.
P-16-0192........... 6/22/2016 9/19/2016 Evonik Corporation.. (S) Reinforcing (G) Silanized
filler; coupling amorphous silica.
agent for
production of tire/
rubber goods.
P-16-0194........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0195........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0196........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0197........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0198........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0199........... 6/22/2016 9/19/2016 CBI................. (G) Process aid..... (G) Silane-treated
aluminosilicate.
P-16-0205........... 6/22/2016 9/19/2016 CBI................. (G) Lubricant Oil; (G) Amide.
(S) General
Industrial Oil; (S)
Hydraulic oil.
P-16-0206........... 6/22/2016 9/19/2016 CBI................. (G) Pigment wetting (G) Formaldehyde
and dispersing ketone condensate
additive. polymer.
P-16-0207........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Spiro
electrolyte tetrafluoroborate.
solution.
P-16-0217........... 6/22/2016 9/19/2016 CBI................. (G) Processing aid (G) Alkenoic acid,
for ground mineral polymer with sodium
slurries (open, non phosphinate (1:1),
dispersive use). mixed salt.
P-16-0218........... 6/22/2016 9/19/2016 Gaco Western........ (G) Architectural (G) Acetoacetylated
Coating; (G) Spray glycerin.
Foam Insulation;
(G) Reactant:
Architectural
Coating; (G)
Reactant: Spray
Foam Insulation.
P-16-0221........... 6/22/2016 9/19/2016 CBI................. (S) Coating agent... (G) Fluorinated
organopolysilazane.
[[Page 74792]]
P-16-0225........... 6/22/2016 9/19/2016 International (S) The notified (S) Isomer mixture
Flavors & substance will be of cyclohexanol, 4-
Fragrances Inc. used as a fragrance ethylidene-2-
ingredient, being propoxy-(cas
blended (mixed) 1631145-48-6) (35-
with other 45%) and
fragrance cyclohexanol, 5-
ingredients to make ethylidene-2-
fragrance oils that propoxy (cas
will be sold to 1631145-49-7) (45-
industrial and 55%).
commercial
customers for their
incorporation into
soaps, detergents,
cleaners, air
fresheners, candles
and other similar
industrial,
household and
consumer products.
P-16-0246........... 6/22/2016 9/19/2016 CBI................. (G) Chemical (S) 2-
intermediate. pyridinecarboxylic
acid, 6-(4-chloro-2-
fluoro-3-
methoxyphenyl)-4,5-
difluoro-,
phenylmethyl ester.
P-16-0253........... 6/22/2016 9/19/2016 CBI................. (G) Fatty acid based (G) Partial esters
glyceride blend. of fatty acids with
glycerol.
P-16-0255........... 6/22/2016 9/19/2016 CBI................. (S) Blocked catalyst (S) 1-butanaminium,
for paint and n,n,n-tributyl-,
coatings. ethyl carbonate
(1:1).
P-16-0256........... 6/22/2016 9/19/2016 CBI................. (S) Blocked catalyst (S) 1-butanaminium,
for paint and n,n,n-tributyl-,
coatings. ethyl carbonate
(1:1).
P-16-0257........... 6/22/2016 9/19/2016 CBI................. (S) Blocked catalyst (S) 1-butanaminium,
for paint and n,n,n-tributyl-,
coatings. methyl carbonate
(1:1).
P-16-0258........... 6/22/2016 9/19/2016 CBI................. (S) Blocked catalyst (S) 1-butanaminium,
for paint and n,n,n-tributyl-,
coatings. ethyl carbonate
(1:1).
P-16-0259........... 6/22/2016 9/19/2016 CBI................. (S) Blocked catalyst (S) 1-butanaminium,
for paint and n,n,n-tributyl-,
coatings. ethyl carbonate
(1:1).
P-16-0261........... 6/22/2016 9/19/2016 CBI................. (S) Intermediate.... (S) Propanoic acid,
3-(dimethylamino)-2-
methyl-, methyl
ester.
P-16-0271........... 6/22/2016 9/19/2016 Oxea Corporation.... (S) Flexible PVC (S) 1,2,4-
plasticizer for benzenetricarboxyli
wire insulation. c acid, 1,2,4-
trinonyl ester.
P-16-0273........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient in (G) Alkyl
metal working fluid. heteromonocycle,
polymer with
heteromonocycle,
carboxyalkyl alkyl
ether.
P-16-0274........... 6/22/2016 9/19/2016 CBI................. (G) Ingredient in (G) Alkyl
metal working heteromonocycle,
fluids. polymer with
heteromonocycle,
carboxyalkyl alkyl
ether.
P-16-0275........... 6/22/2016 9/19/2016 CBI................. (G) Surfactant...... (G) Rhamnolipid
salt.
P-16-0276........... 6/22/2016 9/19/2016 CBI................. (G) Surfactant...... (G) Rhamnolipid
salt.
P-16-0280........... 6/22/2016 9/19/2016 CBI................. (G) Co-initiator.... (G) Polyether polyol
with aromatic
dialkylamine.
P-16-0281........... 6/22/2016 9/19/2016 CBI................. (G) Reactive polyol. (G) Fatty alcohols--
dimers, trimmers,
polymers.
P-16-0282........... 6/22/2016 9/19/2016 CBI................. (S) Paint dryier.... (G) Manganese
complexes.
P-16-0283........... 6/22/2016 9/19/2016 Allnex USA, Inc..... (S) Resin for (G) Alkanedioic
automotive coatings. acid, polymer with
substituted
carbomonocycle,
substituted alkane,
substituted
alkanoic acid and
substituted
alkyldiamine,
compd. with
substituted
alkanol.
P-16-0284........... 6/22/2016 9/19/2016 Deepak Nitrite (S) Optical (G) Anilino
Corporation, Inc. Brightener for substituted bis-
Textiles, Paper and triazinyl
Paperboard. derivative of 4,4'-
diaminostilbene-
2,2'disulfonic
acid.
P-16-0285........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G) Ester amine.
P-16-0286........... 6/22/2016 9/19/2016 CBI................. (G) Wellbore (G) Quaternary
additive. ammonium salts.
P-16-0287........... 6/22/2016 9/19/2016 CBI................. (G) Hardener for (G) Alkanoic acid, 2-
epoxy coating. substituted-methyl
ester, reaction
products with
aromatic diamine-
[alkanediylbis(oxym
ethylene)]bis[oxira
ne]polymer.
P-16-0289........... 6/22/2016 9/19/2016 CBI................. (G) Extrusion (G) Semi-aromatic
compounding resin polyamide.
molding resin.
P-16-0290........... 6/22/2016 9/19/2016 CBI................. (G) Fuel additive... (G) Copolymer of
maleic acid and
olefin.
P-16-0291........... 6/22/2016 9/19/2016 CBI................. (G) Curing Agent.... (G) 1,3-
cyclohexanedimethan
amine adduct.
P-16-0292........... 6/22/2016 9/19/2016 CBI................. (S) Intermediate for (G) Depolymerized
use in the waste plastics.
manufacture of
polymers.
P-16-0293........... 6/22/2016 9/19/2016 Charkit Chemical (S) Compounding of (S) Octanoic acid,
Corp. fragrance for phenylmethyl ester.
industrial cleaners/
janitorial
compounds,
detergents, etc.
P-16-0299........... 6/22/2016 9/19/2016 CBI................. (S) Reactive (G) Polyurethane,
(meth)acrylate methacrylate-
oligomer for ultra blocked.
violet cured 3D
printed parts.
P-16-0300........... 6/22/2016 9/19/2016 H.B. Fuller Company. (G) Industrial (G) Oxirane, 2-
adhesive. methyl-, polymer
with 1,3-xylylene
diisocyanate and
oxirane, 3-
(trimethoxysilyl)pr
opyl isocyanate.
P-16-0301........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G) Propyl
silsesquioxanes,
hydrogen-
terminated.
P-16-0302........... 6/22/2016 9/19/2016 CBI................. (G) Plastic additive (G) Organic modified
propyl
silsesquioxane.
P-16-0303........... 6/22/2016 9/19/2016 CBI................. (G) Use for the (G) Alkyl
production of methyacrylate
acrylic resin for polymer with
waterborne exterior styrene, amino
coatings acrylate and
composition. acrylic acid,
ammonium salt.
P-16-0304........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Polyurea grease.
Adhesive.
P-16-0305........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Polyurea grease.
Adhesive.
P-16-0306........... 6/22/2016 9/19/2016 CBI................. (G) PhotoInitiator.. (G) Polyether polyol
polymer with
aromatic ester.
P-16-0307........... 6/22/2016 9/19/2016 CBI................. (G) Open, non (G)
dispersive use. Heteropolycycliccar
boxylic acid, 1,3-
dihydro-
disubstituted-,
polymer with 1,1'-
methylenebis[4-
isocyanatobenzene],
reaction products
with silica.
[[Page 74793]]
P-16-0308........... 6/22/2016 9/19/2016 Itaconix Corp....... (G) Reactive monomer (S) Butanedioic
acid, 2-methylene-,
1,4-bis (2-
methylpropyl)
ester.
P-16-0309........... 6/22/2016 9/19/2016 CBI................. (G) PMN substances (G) Bisamide
are intended for mixture.
use as rheological
or thixotropic
agents used in the
production of
solvent based
industrial
coatings, high
solid aromatic
paints, adhesives,
sealants, and other
types of paints and
topcoats.
P-16-0310........... 6/22/2016 9/19/2016 CBI................. (G) PMN substances (G) Bisamide
are intended for mixture.
use as rheological
or thixotropic
agents used in the
production of
solvent based
industrial
coatings, high
solid aromatic
paints, adhesives,
sealants, and other
types of paints and
topcoats.
P-16-0311........... 6/22/2016 9/19/2016 CBI................. (S) Coatings for (G) Aromatic
wood, metal and dicarboxylic acid,
plastic. polymer with
cycloalkanemethanol
, alkanediamine,
alkanedioic acid,
hydroxy-2-
(hydroxyalkyl)-2-
alkylcarboxylic
acid,
methylenebis[isocya
nat ocycloalkane]
and
[(methylethylidene)
bis(phenyleneoxy)]b
is[alka nol].
P-16-0312........... 6/22/2016 9/19/2016 CBI................. (S) Coatings for (G) Aromatic
wood, metal and dicarboxylic acid,
plastic. polymer with
cycloalkanemethanol
, alkanediamine,
alkanedioic acid,
hydroxy-2-
(hydroxyalkyl)-2-
alkylcarboxylic
acid,
methylenebis[isocya
nat ocycloalkane]
and
[(methylethylidene)
bis(phenyleneoxy)]b
is[alka nol].
P-16-0313........... 6/22/2016 9/19/2016 Honeyol, Inc........ (S) Use in (S) Tar acids (shale
production of oil), c6?9
resins (raw fraction,
material used in alkylphenols, low-
the production of boiling.
resins).
P-16-0314........... 6/22/2016 9/19/2016 Firmenich, Inc...... (G) As part of a (S) Ethanone, 1-(5-
fragrance formula. propyl-1,3-
benzodioxol-2-yl)-.
P-16-0315........... 6/22/2016 9/19/2016 CBI................. (S) Industrial (G) Alkyldiene,
rubber formulation. polymer, terminated
alkoxysilylalkylcar
bamate.
P-16-0316........... 6/22/2016 9/19/2016 CBI................. (G) Drilling (G) Aliphatic
chemical. polyester.
P-16-0317........... 6/22/2016 9/19/2016 CBI................. (G) Drilling (G) Aliphatic
chemical. polyester.
P-16-0318........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Ammonium
Pulp and Paper sulfate, fatty acid
Processing; (G) esters.
Additive for car
wash applications;
(G) Additive for
metal working
fluids; (G)
Additive for
textile
applications; (G)
Processing aide in
oil field
applications.
P-16-0319........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Ammonium
pulp and paper sulfate, fatty acid
processing; (G) esters.
Additive for car
wash applications;
(G) Additive for
metal working
fluids; (G)
Additive for
textile
applications; (G)
Processing aide in
oil field
applications.
P-16-0320........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Ammonium
pulp and paper sulfate, fatty acid
processing; (G) esters.
Additive for car
wash applications;
(G) Additive for
metal working
fluids; (G)
Additive for
textile
applications; (G)
Processing aide in
oil field
applications.
P-16-0321........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Ammonium
Pulp and Paper sulfate, fatty acid
Processing; (G) esters.
Additive for car
wash applications;
(G) Additive for
metal working
fluids; (G)
Additive for
textile
applications; (G)
Processing aide in
oil field
applications.
P-16-0322........... 6/22/2016 9/19/2016 CBI................. (G) Pulp Bleaching (G) Manganese cyclic
Catalyst; (G) (tri)amine chloride
Textile Bleaching complex.
Catalyst.
P-16-0323........... 6/22/2016 9/19/2016 Allnex USA, Inc..... (G) Coating resin... (G) Formaldehyde,
reaction products
with substituted
carbomonocycle-
substituted
heteromonocycle-
alkylene glycol bis
[[[substituted(oxon
eoalky)oxy]alkyl]am
ino]alky] ether
polymer and alkyl
substituted
alkanediamine,
acetate (salts).
P-16-0324........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive for (G) Uv-curable
open non- urethane acrylate.
descriptive use.
P-16-0325........... 6/22/2016 9/19/2016 CBI................. (G) Oil & gas (G) Polymer of
extraction. substituted acrylic
acid and
bromohexane.
P-16-0326........... 6/22/2016 9/19/2016 Firmenich, Inc...... (G) As part of a (S) Propanoic acid,
fragrance formula. 2,2-dimethyl-,1-
methyl-2-(1-
methylethoxy)-2-
oxoethyl ester.
P-16-0327........... 6/22/2016 9/19/2016 CBI................. (G) additive in (G) Alkenoic acid,
rubber tires. polymer with
alkylalkenoate,
sodium salt.
P-16-0328........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive (G) Terephthalic
component; (G) acid, polymer with
Intermediate. alkanepolycarboxyli
c acids,
alkanepolyols,
isophthalic acid,
polyetherpolyol,
1,1-
methylenebis[isocya
natobenzene],
phthalic anhydride
and a substituted
alkanepolyol.
[[Page 74794]]
P-16-0329........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive (G) Polymer of
component. alkanepolycarboxyli
c acids,
alkanepolyols,
isophthalic acid,
polyetherpolyols,
1,1-
methylenebis[isocya
natobenzene],
terephthalic acid,
phthalic anhydride
and a substituted
alkanepolyol.
P-16-0330........... 6/22/2016 9/19/2016 H.B. Fuller Company. (G) Industrial (G) Hydroxy
Adhesive. functional
triglyceride
polymer with
glycerol mono-ester
and 1,1'-
methylenebis[isocya
natobenzene].
P-16-0331........... 6/22/2016 9/19/2016 H.B. Fuller Company. (G) Industrial (G) Hydroxy
Adhesive. functional
triglyceride
polymer with
glycerol mono-ester
and 1,1'-
methylenebis[4-
isocyanatobenzene].
P-16-0332........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Carbomonocycle
coating. phosphate metal
salt.
P-16-0333........... 6/22/2016 9/19/2016 Charkit Chemical (S) Compounding of (S) 2-hexyldecanal.
Corp. fragrance for
industrial cleaners/
janitorial
compounds,
detergents, etc.
P-16-0333........... 6/22/2016 9/19/2016 Charkit Chemical (S) Compounding of (S) 8-pentadecanone.
Corp. fragrance for
industrial cleaners/
janitorial
compounds,
detergents, etc.
P-16-0333........... 6/22/2016 9/19/2016 Charkit Chemical (S) Compounding of (S)
Corp. fragrance for Methylpentadecanone
industrial cleaners/ (unspecified).
janitorial
compounds,
detergents, etc.
P-16-0334........... 6/22/2016 9/19/2016 Lamberti USA Inc.... (G) Additive for (G) Polymeric amide.
Industrial Purposes.
P-16-0335........... 6/22/2016 9/19/2016 Lamberti USA, Inc... (G) Additive for (G) Polymeric amide.
Industrial Purposes.
P-16-0336........... 6/22/2016 9/19/2016 CBI................. (G) Fuel additive-- (G) Polyolefin
destructive use. ester.
P-16-0337........... 6/22/2016 9/19/2016 CBI................. (S) Monomer......... (G) Aliphatic
acrylate.
P-16-0338........... 6/22/2016 9/19/2016 CBI................. (G) Dyestuff........ (G) Substituted
xanthene
derivative.
P-16-0339........... 6/22/2016 9/19/2016 CBI................. (G) Dyestuff........ (G) Azo derivatives.
P-16-0340........... 6/22/2016 9/19/2016 Solazyme, Inc....... (G) Feedstock for (G) Glycerides, c8-
oleochemical 18 and c18
industry; (G) unsaturated, from
Renewable oil fermentation.
source for fuels.
P-16-0341........... 6/22/2016 9/19/2016 Perstorp Polyols.... (G) Elastomer; (S) (S) 2-oxepanone,
Industrial homopolymer, ester
coatings; (S) with 1,6-
Adhesive components. hexanediol.
P-16-0342........... 6/22/2016 9/19/2016 CBI................. (S) Modified acrylic (G) Modified acrylic
polymer used as a polymer.
dispersant for
deflocculation of
pigments in
industrial paints
and coatings.
P-16-0343........... 6/22/2016 9/19/2016 CBI................. (S) Modified (G) Modified
urethane polymer urethane polymer.
used as a
dispersant for
deflocculation of
pigments in
industrial paints
and coatings.
P-16-0344........... 6/22/2016 9/19/2016 CBI................. (S) Modified acrylic (G) Modified
polymer used as a urethane polymer.
dispersant for
deflocculation of
pigments in
industrial paints
and coatings.
P-16-0345........... 6/22/2016 9/19/2016 CBI................. (G) Processing aid.. (G) Acrylamide,
polymer with
methacrylic acid
derivatives.
P-16-0346........... 6/22/2016 9/19/2016 H.B. Fuller Company. (G) Industrial (G) Alkylamine with
Adhesive. isocyanate.
P-16-0347........... 6/22/2016 9/19/2016 H.B. Fuller Company. (G) Industrial (G) Alkylamine with
Adhesive. isocyanate.
P-16-0348........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G)
lubricant. Polypentaerythritol
, mixed esters with
linear and branched
monoacids.
P-16-0349........... 6/22/2016 9/19/2016 CBI................. (G) Fuel additive... (G) Quaternary
ammonium salt of
polyisobutene
succinic acid.
P-16-0350........... 6/22/2016 9/19/2016 CBI................. (G) Polymer reactant (G) Polyaralkyl aryl
ester of
methacrylic acid.
P-16-0351........... 6/22/2016 9/19/2016 Solazyme, Inc....... (G) Feedstock for (G) Glycerides, c14-
oleochemical 18 and c16-c18
industry; (G) unsaturated, from
Renewable oil fermentation.
source for fuels.
P-16-0352........... 6/22/2016 9/19/2016 CBI................. (G) Industrial (G) Reaction product
catalyst. of
hydroxybenzaldehyde
and fatty alkyl
amine ether.
P-16-0353........... 6/22/2016 9/19/2016 Gantrade Corp....... (S) Chain extender (S) Benzenamine, 4-
and curative for [(4-amino-3-
use in polymer chlorophenyl)methyl
manufacturing. ]-2-ethyl-
P-16-0354........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G) Esteramine.
P-16-0355........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G) Esteramine.
P-16-0356........... 6/22/2016 9/19/2016 CBI................. (G) Wellbore (G) Quaternary
additive. ammonium salts.
P-16-0357........... 6/22/2016 9/19/2016 CBI................. (G) Wellbore (G) Quaternary
additive. ammonium salts.
P-16-0358........... 6/22/2016 9/19/2016 CBI................. (S) Intermediate for (G) Alkyl phenol.
further polymer
reaction.
P-16-0359........... 6/22/2016 9/19/2016 Dic International (G) Pigment (G) Carbopolycycle-
(USA), LLC. additives for bis(diazonium),
industrial coatings. dihalo-, chloride
(1:2), reaction
products with metal
hydroxide, 4-
[(dioxoalkyl)amino]
substituted
benzene, 2-
[(dioxoalkyl)amino]
substituted
benzene, 5-
[(dioxoalkyl)amino]-
2-hydroxy-
substituted benzene
and oxo-n-
phenylalkanamide.
P-16-0360........... 6/22/2016 9/19/2016 Oleon Americas, Inc. (G) Fuel additive... (S) Poly (oxy-1,2-
ethanediyl), alpha-
(1-oxodocosyl)-
omega-[(1-
oxodocosyl)oxy]-
P-16-0361........... 6/22/2016 9/19/2016 American Process Inc (G) Binders......... (S) Pulp, cellulose,
reaction products
with lignin
[nanocrystals].
P-16-0362........... 6/22/2016 9/19/2016 American Process Inc (G) Binders; (G) (S) Pulp, cellulose,
Plastic reaction products
reinforcement; (G) with lignin
Viscosifying agent. [nanofibrils].
P-16-0363........... 6/22/2016 9/19/2016 CBI................. (G) Open, non- (G) Blocked
dispersive. polyester
polyurethane,
neutralized.
P-16-0364........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate (G) Nitrile-
used completely on butadiene-acrylate
site. terpolymers.
[[Page 74795]]
P-16-0365........... 6/22/2016 9/19/2016 Allnex USA, Inc..... (S) UV Curable (G) Alkyl carbonate,
coating resin. polymer with,
substituted alkanes
and substituted
heteromonocycle,
substituted alkyl
acrylate-blocked.
P-16-0366........... 6/22/2016 9/19/2016 CBI................. (G) Open, non- (G) Blocked
dispersive. polyisocyanate.
P-16-0367........... 6/22/2016 9/19/2016 Allnex USA, Inc..... (S) UV curable (G) Substituted
coating resin. heteromonocycle,
polymer with
substituted alkane
and ethoxylated
alkane, substituted
heteromonocycle
substituted alkyl
ester-blocked.
P-16-0368........... 6/22/2016 9/19/2016 CBI................. (S) Adhesive Coating (G) Aromatic
for Carpet Backing. dicarboxylic acid,
polymer with adipic
acid and
alkanediol.
P-16-0369........... 6/22/2016 9/19/2016 Allnex USA, Inc..... (S) Ultra violet (G) Substituted
curable coating heteromonocycle,
resin. telomer with
substituted
carbomonocycles,
substituted alkyl
ester.
P-16-0370........... 6/22/2016 9/19/2016 CBI................. (G) Crosslinker for (G) Polysiloxane
adhesives and with functional
coatings. groups.
P-16-0371........... 6/22/2016 9/19/2016 CBI................. (G) Wetting and (G) Polyester
dispersing additive. polymer phosphate
ester alkyl alkyl.
P-16-0372........... 6/22/2016 9/19/2016 CBI................. (G) Wetting and (G) Polyester
dispersing additive. phosphate alkyl
alkyl esters.
P-16-0373........... 6/22/2016 9/19/2016 CBI................. (S) UV absorber for (G)
plastic articles. Tris(alkyloxyphenyl
)tri azine
compounds.
P-16-0374........... 6/22/2016 9/19/2016 CBI................. (G) Oil additive.... (G) Metal branched
alkyl substituted
carbomonocycle
complexes with
substituted alkyl
carbomonocycle.
P-16-0375........... 6/22/2016 9/19/2016 CBI................. (G) Binder for seal (G) Alkyl
application. methacrylates,
polymer with
olefines.
P-16-0376........... 6/22/2016 9/19/2016 CBI................. (G) Photolithography (G) Hydroxystyrene
resin.
P-16-0377........... 6/22/2016 9/19/2016 CBI................. (G) Film component.. (G) Polyester
polyol.
P-16-0378........... 6/22/2016 9/19/2016 CBI................. (G) Film component.. (G) Polyester
polyol.
P-16-0379........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate for (G) Vinyl functional
polymer synthesis. polymethylalkylpoly
mer.
P-16-0380........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
acetates (salts).
P-16-0381........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Propanoic acid,
electrocoat resin. 2-hydroxy-, compds.
With hydrolyzed
bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
formates (salts).
P-16-0382........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
sulfamates(salts).
P-16-0383........... 6/22/2016 9/19/2016 CBI................. (S) Anti-crater (G) Formic acid,
additive for compds. with
automotive hydrolyzed
electrocoat resin. bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
acetates (salts).
P-16-0384........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Propanoic acid,
electrocoat resin. 2-hydroxy-, compds.
With hydrolyzed
bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
formates (salts).
P-16-0385........... 6/22/2016 9/19/2016 CBI................. (G) Component of (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol A-
epichlorohydrin-
polyethylene glycol
ether with
bisphenol A (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-
N2-[2-[(1, 3-
dimethylbutylidene)
amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethano
l reaction products
sulfamates(salts).
[[Page 74796]]
P-16-0386........... 6/22/2016 9/19/2016 CBI................. (S) Additive for (S) Hexanedioic
motor oil acid, 1,6-bis(3,5,5-
formulations and trimethylhexyl)
gear oil ester.
lubricants. The
compound serves two
primary functions.
It acts as a seal
swell additive. The
elastomers used in
the seals of the
motor/gear box will
absorb a small
amount of the
chemical compound
and swell. This
prevents seals from
leaking and gives
them a longer
service life. The
chemical also
serves as a
boundary lubricant.
The two ester
groups make this
compound polar.
The polarity causes
the compound to be
attracted to metal
surfaces and
adhere. This
creates a boundary
layer between the
metal surface and
the bulk primary
lubricant used in
the motor/gear oil
formulation.
P-16-0387........... 6/22/2016 9/19/2016 CBI................. (G) Additives for (G) Aliphatic
polymers. polycarboxylic
acid, polymer with
alicyclic
polyhydric alcohol
and
polyoxyalkylene.
P-16-0388........... 6/22/2016 9/19/2016 CBI................. (G) Hardener for (G) Aliphatic
epoxy coating. polyamines,
polymers with
bisphenol A and
epichlorohydrin.
P-16-0389........... 6/22/2016 9/19/2016 CBI................. (G) Oil & gas (G) Polymer of
extraction. substituted acrylic
acid,
mercaptoethanol and
bromohexane.
P-16-0390........... 6/22/2016 9/19/2016 CBI................. (S) Coating resin (G) Alkyl alkenoic
used in anti- acid alkyl ester
fogging clear coat polymer with alkyl
applied to alkenoate, dialkyl
automotive parts. alkenamide, hydroxy-
modified alkenoic
acid derivative,
and sulfonic-
modified alkenoic
acid derivative.
P-16-0391........... 6/22/2016 9/19/2016 CBI................. (G) Stabilizer...... (G) Polyester polyol
polymer with
aliphatic
isocyanate and
phenol derivates.
P-16-0392........... 6/22/2016 9/19/2016 CBI................. (G) Wax............. (G) Modified
vegetable oil.
P-16-0393........... 6/22/2016 9/19/2016 CBI................. (S) Plasticizer for (G) Di-substituted
use with polymers. benzenedicarboxylic
acid ester.
P-16-0394........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive........ (G)
Benzenedicarboxylic
acid, polymer with
decanedioic acid
and dodecanedioic
acid, ethanediol,
hexanedioic acid,
hexanediol, alpha-
hydro-omega-
hydroxypoly[oxy(met
hyl-1,2-
ethanediyl)],
isobenzofurandione,
1,1'-methylenebis[4-
isocyanatobenzene],
phenol and
trimethylbicyclo
hept-2-ene.
P-16-0395........... 6/22/2016 9/19/2016 CBI................. (S) Polymeric (G) Methacrylic
intermediate for acid, polymer with
the production of alkyl methacrylates
acrylic polymers and substituted
for industrial acrylamide,
coatings. ammonium salt.
P-16-0396........... 6/22/2016 9/19/2016 CBI................. (G) Specialty (G) Alkylaminium
chemical for hydroxide.
processing additive.
P-16-0398........... 6/22/2016 9/19/2016 CBI................. (G) Corrosion (G) Di-ammonium di-
Inhibitor. carboxylate.
P-16-0399........... 6/22/2016 9/19/2016 TryEco LLC.......... (S) Agricultural (S) Starch, polymer
soil amendment for with 2-propenoic
filed crops, seed acid, potassium
coating and turf. salt. oxidized.
P-16-0400........... 6/22/2016 9/19/2016 Shell Chemical, LP.. (S) Agrochemical; (S) Alkanes, C11-16-
(S) Chemical branched and
Intermediate; (S) linear.
Metalworking Fluid
Use; (S) Use in
cleaning Fluids;
(S) Use in Cured
Coatings.
P-16-0401........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive........ (G) Propenoic acid
alkyl ester,
polymer with alkyl
acrylate, isooctyl
substituted, alkyl
diol, alkyl diol
propenoate, alkyl-
oxycarbamate.
P-16-0402........... 6/22/2016 9/19/2016 CBI................. (S) Flotation (G) Propanediamine,
additive for use in [(isoalkyloxy)propy
mineral processing. l] derivs., salts.
P-16-0403........... 6/22/2016 9/19/2016 CBI................. (G) Open, non (G) Heteropolycyclic
dispersive use. carboxylic acid,
polymer with 2-
ethyl-2-
(hydroxymethyl)-1,3-
propanediol and 4-
substitutedbenzene,
substituted
carbomonocycle-and
alkyl-substituted
carbomonocycle-
blocked.
P-16-0404........... 6/22/2016 9/19/2016 CBI................. (G) A colorant for (G) Alkyl ester, 2-
dyeing various ({4-[2-
synthetic fibers (trisubstituted
and fabrics. Open, phenyl)azo]-5-
non-dispersive use. acetamido-2-
substitutedphenyl{t
i (substituted
alkoxy)amino).
P-16-0405........... 6/22/2016 9/19/2016 CBI................. (G) A colorant for (G) Alkyl ester, 2-
dyeing various ({5-acetamido-2-
synthetic fibers alkoxy-4-[2-
and fabrics. Open, (substituted-2,1-
non-dispersive use. benzothiazol-3-
yl)azo]pheny]{time}
(disubsti
tuted)amino).
P-16-0406........... 6/22/2016 9/19/2016 CBI................. (G) Coating......... (G) Functionalized
polyimide.
P-16-0407........... 6/22/2016 9/19/2016 CBI................. (G) Coating......... (G) Functionalized
polyamide.
P-16-0408........... 6/22/2016 9/19/2016 CBI................. (G) A colorant for (G) 3-
dyeing various pyridinecarbonitril
synthetic fibers e, 1,2-dihydro-
and fabrics. Open, trisubstituted-5-[2-
non-dispersive use. (disubstituted
phenyl)azo]-2-oxo.
P-16-0409........... 6/22/2016 9/19/2016 CBI................. (G) chemical (G) Alkylphenol.
intermediate for
the synthesis of
another substance.
P-16-0410........... 6/22/2016 9/19/2016 CBI................. (G) Automotive (G)
engine fluid Silicophosphonate-
additive. sodium silicate.
[[Page 74797]]
P-16-0411........... 6/22/2016 9/19/2016 CBI................. (G) Crosslinking (G) Substituted
agent. polyalkylene
polycarbomonocyclic
ester, polymer with
polyalkylene
glycol,
alkoxyalkanol
blocked.
P-16-0412........... 6/22/2016 9/19/2016 Cardolite (G) Epoxy Coating... (G) Cashew, nutshell
Corporation. liq., polymer with
amine and
formaldehyde.
P-16-0413........... 6/22/2016 9/19/2016 Siltech LLC......... (S) anti-fingerprint (S) Siloxanes and
material for a silicones, di-me, 3-
metal coating hydroxypropyl me,
application. me
3,3,4,4,5,5,6,6,6-
nonafluorohexyl.
P-16-0414........... 6/22/2016 9/19/2016 CBI................. (S) Polymerized (G) Dimethylsiloxane
pigment used in the methyl methacrylate
manufacture of copolymer.
electronic inks.
P-16-0415........... 6/22/2016 9/19/2016 CBI................. (G) coating for oil (G) Polyurethane.
and gas industry.
P-16-0417........... 6/22/2016 9/19/2016 CBI................. (G) Adhesive for (G) Isocyanate
open, non- terminated
descriptive use. polyurethane resin.
P-16-0418........... 6/22/2016 9/19/2016 CBI................. (G) A colorant for (G) 6-(disubstituted-
dyeing various phenyl azo)-4,7-
synthetic fibers disubstituted-
and fabrics. Open, quinolinepropanoic
non-dispersive use. acid, alkyl ester.
P-16-0419........... 6/22/2016 9/19/2016 CBI................. (G) Use as (G) N-alkyl-
intermediate. dialkylpiperidine.
P-16-0420........... 6/22/2016 9/19/2016 CBI................. (S) The notified (G) Dimethyl
substance will be cyclohexenyl
used as a fragrance propanol.
ingredient, being
blended (mixed)
with other
fragrance
ingredients to make
fragrance oils that
will be sold to
industrial and
commercial
customers for their
incorporation into
soaps, detergents,
cleaners and other
similar household
and consumer
products.
P-16-0421........... 6/22/2016 9/19/2016 Guardian Industries (S) Additive to (S) Flue dust, glass
Corp. facilitate melting manufg.
of sand during desulfurization
manufacture of definition: the
glass. dust produced from
the flue gas
exhaust cleaning of
a glass
manufacturing
process using
carbonate
containing
substances. it
consists primarily
of na2so4, na2co3,
and na4(so4)(co3).
P-16-0422........... 6/22/2016 9/19/2016 CBI................. (G) Additive for (S) 1,2-
Polymers. cyclohexanedicarbox
ylic acid, 1-
(phenylmethyl)
ester, ester with
2,2,4-trimethyl-1,3-
pentanediol mono(2-
methylpropanoate).
P-16-0423........... 6/22/2016 9/19/2016 CBI................. (G) Intermediate.... (G)
Tetraalkylpiperidin
ium halide.
P-16-0424........... 6/22/2016 9/19/2016 CBI................. (G) Directing agent. (G)
Tetraalkylpiperidin
ium hydroxide.
P-16-0425........... 6/22/2016 9/19/2016 CBI................. (G) A chemical (G) Amino-silane.
reactant used in
manufacturing a
polymer.
P-16-0426........... 6/22/2016 9/19/2016 CBI................. (G) Lubricating oil (G) Alkenyl bis-
additive. succinimide.
P-16-0427........... 6/22/2016 9/19/2016 CBI................. (G) adhesive........ (G) Alkanedioic acid
polymer with
ethenylbenzene alky-
2-alkenoate,
alkanediol, .alpha.-
hydro-.omega.-
hydroxypoly[oxyalky
l-alkanediyl)],
hydroxyalkyl-alkyl-
alkenoate, and
aromatic
isocyanate.
P-16-0428........... 6/22/2016 9/19/2016 Cardolite (S) Industrial...... (G) Phenol,
Corporation. formaldehyde and
amine.
P-16-0429........... 6/22/2016 9/19/2016 CBI................. (G) Universal tint (G) Endcapped
paste resin having polysiloxane.
high solids.
P-16-0430........... 6/22/2016 9/19/2016 CBI................. (G) Filler.......... (S) Pentanedioic
acid, 2-methyl-
P-16-0432........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0433........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0434........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0435........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0436........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0437........... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products amidoamine
used in ore acetates.
processing.
P-16-0439........... 6/30/2016 9/28/2016 CBI................. (G) coloring agent.. (G) Modified carbon
black.
P-16-0440........... 6/30/2016 9/28/2016 CBI................. (G) coloring agent.. (G) Modified carbon
black.
P-16-0441........... 6/23/2016 9/21/2016 CBI................. (G) Oilfield (G) Formaldehyde,
additive. reaction products
with amine-
alkylamine reaction
products ether
amine derivs.
residues.
P-16-0442........... 6/23/2016 9/21/2016 CBI................. (G) Polymer for (G) Amine salted
coatings. polyurethane.
P-16-0443........... 6/23/2016 9/21/2016 CBI................. (G) Polymer for (G) Amine salted
coatings. polyurethane.
P-16-0444........... 6/23/2016 9/21/2016 CBI................. (G) Polymer for (G) Amine salted
coatings. polyurethane.
P-16-0445........... 6/23/2016 9/21/2016 CBI................. (G) Polymer for (G) Amine salted
coatings. polyurethane.
P-16-0446........... 7/8/2016 10/6/2016 Allnex USA Inc...... (S) Resin in (G) Fatty acids,
architectural reaction products
primer coatings. with alkylamine,
polymers with
substituted
carbomonocycle,
substituted
alkylamines,
heteromonocycle and
substituted
alkanoate, lactates
(salts),
[[Page 74798]]
P-16-0447........... 6/24/2016 9/22/2016 CBI................. (G) Additive for (G) Alkyl alkenoate,
coatings. dialkyl alkanediyl,
polymer with alkyl
alkenoate,
substituted
carbomonocycle,
alkyl alkenoate and
heteromonocycle
alkyl alkenoate,
diazene bis alkyl
heteromonocycle
initiated.
P-16-0448........... 6/27/2016 9/25/2016 CBI................. (G) Oil additive.... (G) Metal salts
branched alkyl
substituted
carbomonocycle with
substituted alkyl
carbomonocycle
complexes.
P-16-0449........... 6/27/2016 9/25/2016 CBI................. (S) Use per FFDCA: (S) 2,7-decadienal,
Cosmetics; (S) Use (2e,7z)-
per TSCA: Fragrance
uses; scented
papers, detergents,
candles etc.
P-16-0453........... 6/29/2016 9/27/2016 Miwon North America, (S) Resin for (G) Polyester
Inc. Industrial Coating. acrylate.
P-16-0454........... 6/30/2016 9/28/2016 CBI................. (G) material for (G) Trisubstituted
highly dispersive alkenol.
use in consumer
products.
SN-03-0015.......... 6/22/2016 9/19/2016 Degussa Corporation. (S) Anti-graffiti (G) Fluoro/amino
systems; surface silane mixture.
treatment of
fabrics and porous
mineral surfaces.
SN-03-0016.......... 6/22/2016 9/19/2016 Degussa Corporation. (S) Anti-soiling (S) Silane,
surface treatment triethoxy(3,3,4,4,5
of glass and ,5,6,6,7,7,8,8,8-
ceramic surfaces. tridecafluorooctyl)-
SN-12-0005.......... 6/22/2016 9/19/2016 CBI................. (G) Additive, open, (G) Multi-walled
non-dispersive. carbon nanotubes.
SN-15-0004.......... 6/22/2016 9/19/2016 CBI................. (S) Slurry (G) Brominated
dispersion to be compounds.
blended with
coating compound
and applied to
fabric.
SN-15-0009.......... 6/22/2016 9/19/2016 CBI................. (G) Polymer additive (G) Fatty acid
amide.
SN-16-0005.......... 6/22/2016 9/19/2016 CBI................. (G) Abrasion (G) Potassium
resistant titanate.
applications.
SN-16-0009.......... 6/22/2016 9/19/2016 CBI................. (G) Additive for (G) Trialkylol
household products.. homopolymer.
SN-16-0011.......... 6/22/2016 9/219/2016 CBI................. (S) Component of (G) Cesium
infrared absorption tungstate.
material.
SN-16-0012.......... 6/22/2016 9/20/2016 CBI................. (S) Additive for (G) Fatty acid
flotation products; amidoamine.
(S) Chemical
intermediate.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: October 21, 2016.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2016-26021 Filed 10-26-16; 8:45 am]
BILLING CODE 6560-50-P