Foreign-Trade Zone (FTZ) 21-Dorchester County, South Carolina; Notification of Proposed Production Activity; Volvo Car US Operations, Inc. (Motor Vehicles and Related Parts); Ridgeville, South Carolina, 66257-66259 [2016-23303]

Download as PDF Federal Register / Vol. 81, No. 187 / Tuesday, September 27, 2016 / Notices estimates the total annual cost to the public to be $1,022,000 ($882,000 in fees + $140,000 in staff time = $1,022,000). IV. Request for Comments Comments are invited on: (a) Whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; (b) the accuracy of the agency’s estimate of the burden (including hours and cost of the proposed collection of information; (c) ways to enhance the quality, utility, and clarity of the information to be collected; and (d) ways to minimize the burden of the collection of information on respondents, including through the use of automated collection techniques or other forms of information technology. Comments submitted in response to this notice will be summarized and/or included in the request for OMB approval of this information collection; they also will become a matter of public record. Sheleen Dumas, PRA Departmental Lead, Office of the Chief Information Officer. [FR Doc. 2016–23208 Filed 9–26–16; 8:45 am] BILLING CODE 3510–13–P DEPARTMENT OF COMMERCE Signed at Washington, DC, this 21st day of September 2016. Paul Piquado, Assistant Secretary of Commerce for Enforcement and Compliance, Alternate Chairman, Foreign-Trade Zones Board. Foreign-Trade Zones Board [Order No. 2014] Reorganization and Expansion of Foreign-Trade Zone 82 Under Alternative Site Framework; Mobile, Alabama [FR Doc. 2016–23308 Filed 9–26–16; 8:45 am] BILLING CODE 3510–DS–P asabaliauskas on DSK3SPTVN1PROD with NOTICES Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Board adopted the alternative site framework (ASF) (15 CFR Sec. 400.2(c)) as an option for the establishment or reorganization of zones; Whereas, the City of Mobile, grantee of Foreign-Trade Zone 82, submitted an application to the Board (FTZ Docket B– 30–2015, docketed May 1, 2015, revised September 1, 2016) for authority to reorganize and expand under the ASF with a service area of Mobile, Baldwin, Butler (portion), Choctaw (portion), Clarke, Conecuh, Escambia, Monroe, Washington and Wilcox (portion) Counties, in and adjacent to the Mobile Customs and Border Protection port of VerDate Sep<11>2014 17:08 Sep 26, 2016 Jkt 238001 entry, to restore 80 acres at Site 1, and FTZ 82’s existing Sites 1 (as modified), 2, 3, 4, 7, 9, 13 and 18 would be categorized as magnet sites and Sites 14, 15, 16, 17 and 19 would be categorized as usage-driven sites; Whereas, notice inviting public comment was given in the Federal Register (80 FR 26538–26539, May 8, 2015) and the revised application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendations of the examiner’s report and addendum report, and finds that the requirements of the FTZ Act and the Board’s regulations are satisfied; Now, therefore, the Board hereby orders: The revised application to reorganize and expand FTZ 82 under the ASF is approved, subject to the FTZ Act and the Board’s regulations, including Section 400.13, to the Board’s standard 2,000-acre activation limit for the zone, to an ASF sunset provision for magnet sites that would terminate authority for Sites 2, 3, 4, 7, 9, 13 and 18 if not activated within five years from the month of approval, and to an ASF sunset provision for usage-driven sites that would terminate authority for Sites 14, 15, 16, 17 and 19 if no foreign-status merchandise is admitted for a bona fide customs purpose within three years from the month of approval. DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–64–2016] Foreign-Trade Zone (FTZ) 21— Dorchester County, South Carolina; Notification of Proposed Production Activity; Volvo Car US Operations, Inc. (Motor Vehicles and Related Parts); Ridgeville, South Carolina Volvo Car US Operations, Inc. (Volvo) submitted a notification of proposed production activity to the FTZ Board for its facility in Ridgeville, South Carolina. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 9, 2016. A separate application by the South Carolina State Ports Authority, grantee PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 66257 of FTZ 21, for subzone designation at the Volvo facility will be submitted and processed under Section 400.31 of the Board’s regulations. The facility is currently under construction and will be used for the production of motor vehicles and related parts. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Volvo from customs duty payments on the foreign-status components used in export production. On its domestic sales, Volvo would be able to choose the duty rates during customs entry procedures that apply to passenger motor vehicles, lithium-ion batteries for passenger motor vehicles, passenger motor vehicle bodies and stamped motor vehicle body parts (duty rates range between 2.5% and 3.4%) for the foreign-status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: First aid kits; acrylic/vinyl paints; adhesives; polyurethane profile shapes/seals/ plates/sheets/film; acoustic foams; foam absorbers; plastic connectors/fittings/ tapes/decals/plates/sheets/film/caps/ covers/plugs/anchors/handles/brackets/ clamps/clips/covers/fasteners/guides/ hinges/mountings/locks/knob handles/ o-rings/cable ties/clamps/clips/ cushions/emblems/nuts/plates/ retainers/rivets/tubing/door lock parts; rubber tire sealants/threads/cords/ plates/sheets/strip/gaskets/hoses/air filter ducts/tubes/belts/tires/mats/orings/seals/mouldings/absorbers/ cushions/rings/bellows//mounts/rods/ bushings; upholstery leather; leather cases/bags; felt paper and paperboards; light-weight coated paper; cardboard boxes; printed books/brochures/leaflets/ manuals; felt strips; manmade fiber felt shapes; felt damping strips; netting of twines/ropes; manmade fiber twine, cordage, or rope nettings; nylon carpets; tufted other manmade textile carpets/ mats; felt carpets; manmade fiber tufted and non-tufted carpets/mats; velcro straps; vent pads (polyester fleece); umbrellas; mineral wools; asbestos brake linings/pads; graphite or other carbon gaskets; glass; mirrors; sun visors; glass lenses; sound absorber/ insulating articles of fiberglass; platinum catalysts; wood screws; steel butt weld fittings/flanges/gas containers; iron or steel coupling locks/wire/ropes/ cables/roller chains/nails/screws/bolts/ E:\FR\FM\27SEN1.SGM 27SEN1 asabaliauskas on DSK3SPTVN1PROD with NOTICES 66258 Federal Register / Vol. 81, No. 187 / Tuesday, September 27, 2016 / Notices studs/sockets/nuts/rivets/cotter pins/ valves/keys/springs/hangers/clamps/ clips/gaskets/o-rings; copper and steel pipe; copper suppression band assemblies/o-rings/nuts/screws/earthing strap hinge hatch assemblies; aluminum plates/sheets/strips/foil/rivets/blinds/ nuts/exhaust gaskets/decals; wrenches; locks; blank keys; hinges; base metal gas springs/mountings/anchors/handles/ braces/brackets/clips/locks/clamps/ flange seals/gaskets/o-rings/cradles/ throttle caps/frames/guide rails/nuts/ plates/spacers; internal combustion engines; diesel engines; engine blocks/ caps/valves/plugs/rings/rods/cylinder heads; telescoping linear acting hydraulic cylinders; linear acting cylinders; pumps (fuel injection, engine oil, transmission and coolant); brake fluid reservoirs; air conditioning (A/C) compressors; fan shrouds; vacuum pump inlet connectors; turbocharger pipes; heating ventilation air conditioning (HVAC) units; air conditioner parts; HVAC heat exchangers; oil coolers; oil filters; motor vehicle A/C accumulators; engine air filters; catalytic converters; filters; air filter inlets/housings/covers; fire extinguishers; washer fluid nozzles/ reservoirs; jacks; winches; trunk lid spindle drives; cranks; USB hubs; dynamic stability or variable damper control devices; auxiliary air valves; solenoid valves; throttle housing/ thermostat valves; plastic drain cocks; engine cooling system housings/ thermostats; valve bodies and related parts; fuel injector valve parts; bearings; speedometer cables; crankshafts; camshafts; bearings; flywheels; engine belt tensioners; automatic transmission flexplates; carburetor repair kits; engine support mounts; liquid filled engine mounts; wiper motors; mirror drive units; wiper motors; electric motors; alternators; parts of fuel pumps; electric converters; electric chargers; power supplies; inductors; flexible permanent magnets; clutches with solenoid actuators; solenoids; lithium manganese dioxide batteries; primary batteries; lead-acid batteries; electric storage batteries; lithium-ion batteries/cell module parts; vacuum cleaners; spark plugs; starter motors; glow plugs; air conditioning generators/distributors/ covers/traps; lights; reflectors; electric signals; motor vehicle horns; siren sensors; windshield wiper systems; headlight frames/inserts/mountings; baffles; control units; headlights; wiper arms; lamps; heater assemblies; electric heaters; seat cushion heaters; air inlets for intake air filters; cellular/wireless telephones; telematic infotainment head units and control modules; telematics VerDate Sep<11>2014 17:08 Sep 26, 2016 Jkt 238001 assemblies; global positioning system (GPS) assemblies; microphones; loudspeakers; earphone module assemblies; amplifiers; speakers; speaker parts; CD changers/players; TV modules/assemblies; DVD ROMs; cameras; forward looking radar sensors; radio navigation equipment; radio remote controls; radios; tape players; CD players; video monitors; monitor assemblies; antennas; TV tuner modules; signal modules; active sound display modules; remote control key shells/covers; alarm systems; electromagnetic interference filter assemblies; suppression filter assemblies; electrical resistors and related parts; power units/sensors; spark plug connectors; fuses; cables; grounds; relays; switches; lamp holders; connectors; elbows; connectors/boxes terminals; control switches; housings for electrical/fuse boxes; bulbs; lamps; electrical filaments; parts of electrical filaments/lamps; light emitting diodes; diode parts; integrated circuits; cable harnesses; electric cables; harness cables; optic fiber cables; ignition lead holders; insulating fittings; trunk lid noise suppression filters; chassis fitted with engines; motor vehicle bodies; bumper covers/frames/grills/panels/ rails/trims; door assemblies/shells/ panels/guides/frames; dashboard assemblies; bracket assemblies; door lock rods; cross members; lower arms; panel supports; cargo partitions; brake drums/rotors/discs/pads/shoes/calipers/ covers/shields; gear boxes; oil sumps; axles; shafts; aluminum wheels; steel wheels; wheel cap rings; shock absorbers; suspension anti-roll bars/ baffles/struts/control arms/frames/ springs/knobs/levers/supports/arms/ knuckles/rollers; radiators and related parts; mufflers; exhaust pipes; clutches and related parts; steering wheels/ columns/boxes; airbag modules; shafts; gear selectors; cables; carriers; flanges; knobs; sleeves; oil dipstick tubes; gear shifts; absorbers; air ducts/guides/inlets/ shields/vents; anchors; battery boxes/ casings/components/covers/shelves/ trays; cables; brake pedals; brake lines; differential carriers; casings; textile child seat protector covers; plastic child seat protector covers; clutch pedals/ assemblies; drive shafts; pedals; coolant pipes/coils; engine covers; textile sun shade curtains; plastic sun shade curtains; tow bars/hitches/hooks; dipsticks; drain plugs; engine casings/ coolant pipes/feed lines/caps; plastic/ aluminum/rubber floor mats; fuel feed lines/pipes/fillers/caps/hoses/housing filters/shields/rails/tanks/hoses; heat shields; hitches; manmade fiber cargo nets; pedal pads; lenses; signals; optical PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 night vision camera; temperature sensors; fuel sensors/gauges; HVAC sensors; air flow sensors; gas temperature sensors; gas pressure sensors; oxygen sensors; exhaust sensors; night vision modules; sensor parts; instrument clusters; heads up display modules; instrument cluster parts; battery sensors; accelerometers; sensor rods; power take off (PTO) control units; voltage regulators/control units; dashboard clocks; seat sliding blocks; leather seats/arm rests/head rests and related parts; textile seats/arm rests/head rests and related parts; plastic seats/arm rests/head rests and related parts; textile child safety seat covers; illuminated signs; zipper sliders/zipper fasteners; and, cigarette lighters (duty rates range from duty-free to 12.5%). The following foreign-sourced materials/components will be admitted to the proposed subzone in privileged foreign status (19 CFR 146.41), thereby precluding inverted tariff benefits on such items: felt strips (HTSUS 5602.10); manmade fiber felt shapes (HTSUS 5602.90); felt damping strips (HTSUS 5602.90); netting of twines or ropes (HTSUS 5608.19); manmade fiber twine/cordage/rope nettings (HTSUS 5608.90); nylon carpets (HTSUS 5703.20); tufted other manmade textile carpets/mats (HTSUS 5703.30); felt carpets (HTSUS 5704.90); manmade fiber tufted and non-tufted carpets/mats (HTSUS 5705.00); velcro straps (HTSUS 5806.10); vent pads (polyester fleece) (HTSUS 5911.90); textile child seat protector covers (HTSUS 8708.99); textile sun shade curtains (HTSUS 8708.99); manmade fiber cargo nets (HTSUS 8708.99); textile seats/arm rests/head rests and related parts (HTSUS 9401.90); and, textile child safety seat covers (HTSUS 9401.90). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is November 7, 2016. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site which is accessible via www.trade.gov/ftz. For further information, contact Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. E:\FR\FM\27SEN1.SGM 27SEN1 Federal Register / Vol. 81, No. 187 / Tuesday, September 27, 2016 / Notices Dated: September 20, 2016. Andrew McGilvray, Executive Secretary. [FR Doc. 2016–23303 Filed 9–26–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–967; C–570–968] Aluminum Extrusions From the People’s Republic of China: Notice of Court Decision Not in Harmony With Final Scope Ruling and Notice of Amended Final Scope Ruling Pursuant to Court Decision Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: On August 26, 2016, the United States Court of International Trade (CIT or Court) sustained the Department of Commerce’s (Department) final results of redetermination in which the Department determined, under protest, that Whirlpool Corporation’s (Whirlpool) kitchen appliance door handles with plastic end caps (handles with end caps) are not covered by the scope of the antidumping (AD) and countervailing duty (CVD) orders on aluminum extrusions from the People’s Republic of China. DATES: Effective: September 5, 2016. FOR FURTHER INFORMATION CONTACT: James Terpstra, AD/CVD Operations, Office III, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: 202– 482–3965. SUPPLEMENTARY INFORMATION: AGENCY: Background asabaliauskas on DSK3SPTVN1PROD with NOTICES On August 4, 2014, the Department issued a final scope ruling in which it determined that two types of kitchen appliance door handles imported by Whirlpool are within the scope of the Orders 1 and did not meet the scope exclusion for ‘‘finished merchandise’’ or ‘‘finished goods kits.’’ 2 Whirlpool challenged the Department’s final scope ruling at the CIT. 1 See Aluminum Extrusions from the People’s Republic of China: Antidumping Duty Order, 76 FR 30650 (May 26, 2011) and Aluminum Extrusions from the People’s Republic of China: Countervailing Duty Order, 76 FR 30653 (May 26, 2011) (the Orders). 2 See ‘‘Final Scope Ruling on Whirlpool Kitchen Appliance Door Handles,’’ dated August 4, 2014 (Whirlpool Kitchen Appliance Door Handles Scope Ruling). VerDate Sep<11>2014 17:08 Sep 26, 2016 Jkt 238001 On February 1, 2016, in Whirlpool I the Court issued an opinion and order sustaining the Department’s findings in the original scope ruling that Whirlpool’s kitchen appliance door handles consisting of a single piece of extruded aluminum are within the scope of the Orders based on a plain reading of the scope language.3 However, the Court remanded the Department’s determination that the scope of the Orders covers handles consisting of a single piece of aluminum extrusion with plastic end caps fastened on with screws. The Court found that the general language of the scope did not support the Department’s determination.4 The Court further found that, assuming arguendo that Whirlpool’s handles with end caps were covered by the general scope language, the Department erred in finding that the products did not satisfy the ‘‘finished merchandise’’ exclusion.5 On April 18, 2016, the Department issued its Final Results of Redetermination, in which it found that although it respectfully disagreed with the Court that Whirlpool’s handles with end caps were not covered by the general scope language, it found under protest that Whirlpool’s handles with end caps were outside the scope of the Orders.6 As a result, the Department did not consider whether Whirlpool’s handles with end caps were subject to the exclusion for ‘‘finished merchandise.’’ 7 On August 26, 2016, in Whirlpool II the Court sustained the Department’s finding in the Final Results of Redetermination that Whirlpool’s handles with plastic end caps are not covered by the scope of the Orders.8 Consistent with the decision of the United States Court of Appeals for the Federal Circuit (Federal Circuit) in Timken Co. v. United States, 893 F.2d 337 (Fed. Cir. 1990) (Timken), as clarified by Diamond Sawblades Mfrs. Coalition v. United States, 626 F.3d 1374 (CAFC 2010) (Diamond Sawblades), the Department is notifying the public that the final judgment in this case is not in harmony with the Department’s final scope ruling and is amending the final scope ruling to find 3 See Whirlpool Corporation v. United States, Court No. 14–00199, Slip Op. 16–8 (Whirlpool I), at 16–17. 4 Id., at 8–11. 5 Id., at 11–14. 6 See Results Of Redetermination Pursuant To Court Remand, Whirlpool Corp. v. United States, Court No. 14–000199, Slip Op. 16–08 (CIT February 1, 2016) (Final Results of Redetermination). 7 Id. 8 See Whirlpool Corporation v. United States, Court No. 14–00199, Slip Op. 16–81 (Whirlpool II). PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 66259 that the handles with end caps imported by Whirlpool are not covered by the scope of the Orders. Timken Notice In its decision in Timken, 893 F.2d at 341, as clarified by Diamond Sawblades, the Federal Circuit held that, pursuant to section 516A(e) of the Tariff Act of 1930, as amended (the Act), the Department must publish a notice of a court decision that is not ‘‘in harmony’’ with a Department determination and must suspend liquidation of entries pending a ‘‘conclusive’’ court decision. The CIT’s August 26, 2016, judgment in Whirlpool II sustaining the Department’s finding in the Final Results of Redetermination that Whirlpool’s handles with end caps are not covered by the scope of the Orders constitutes a final decision of the Court that is not in harmony with the Whirlpool Kitchen Appliance Door Handles Scope Ruling. This notice is published in fulfillment of the publication requirements of Timken. Accordingly, the Department will continue the suspension of liquidation of Whirlpool’s handles with end caps at issue pending expiration of the period for appeal or, if appealed, pending a final and conclusive court decision. Amended Final Scope Ruling Because there is now a final court decision with respect to the Whirlpool Kitchen Appliance Door Handles Scope Ruling, the Department amends its final scope ruling and finds that the scope of the Orders does not cover Whirlpool’s handles with end caps. The Department will instruct U.S. Customs and Border Protection (CBP) that the cash deposit rate will be zero percent for Whirlpool’s handles with end caps. In the event the CIT’s ruling is not appealed, or if appealed, upheld by the Federal Circuit, the Department will instruct CBP to liquidate entries of Whirlpool’s handles with end caps without regard to antidumping and/or countervailing duties, and to lift suspension of liquidation of such entries. This notice is issued and published in accordance with section 516A(c)(1) of the Act. Dated: September 15, 2016. Paul Piquado, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2016–23305 Filed 9–26–16; 8:45 am] BILLING CODE 3510–DS–P E:\FR\FM\27SEN1.SGM 27SEN1

Agencies

[Federal Register Volume 81, Number 187 (Tuesday, September 27, 2016)]
[Notices]
[Pages 66257-66259]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-23303]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-64-2016]


Foreign-Trade Zone (FTZ) 21--Dorchester County, South Carolina; 
Notification of Proposed Production Activity; Volvo Car US Operations, 
Inc. (Motor Vehicles and Related Parts); Ridgeville, South Carolina

    Volvo Car US Operations, Inc. (Volvo) submitted a notification of 
proposed production activity to the FTZ Board for its facility in 
Ridgeville, South Carolina. The notification conforming to the 
requirements of the regulations of the FTZ Board (15 CFR 400.22) was 
received on September 9, 2016.
    A separate application by the South Carolina State Ports Authority, 
grantee of FTZ 21, for subzone designation at the Volvo facility will 
be submitted and processed under Section 400.31 of the Board's 
regulations. The facility is currently under construction and will be 
used for the production of motor vehicles and related parts. Pursuant 
to 15 CFR 400.14(b), FTZ activity would be limited to the specific 
foreign-status materials and components and specific finished products 
described in the submitted notification (as described below) and 
subsequently authorized by the FTZ Board.
    Production under FTZ procedures could exempt Volvo from customs 
duty payments on the foreign-status components used in export 
production. On its domestic sales, Volvo would be able to choose the 
duty rates during customs entry procedures that apply to passenger 
motor vehicles, lithium-ion batteries for passenger motor vehicles, 
passenger motor vehicle bodies and stamped motor vehicle body parts 
(duty rates range between 2.5% and 3.4%) for the foreign-status inputs 
noted below. Customs duties also could possibly be deferred or reduced 
on foreign-status production equipment.
    The components and materials sourced from abroad include: First aid 
kits; acrylic/vinyl paints; adhesives; polyurethane profile shapes/
seals/plates/sheets/film; acoustic foams; foam absorbers; plastic 
connectors/fittings/tapes/decals/plates/sheets/film/caps/covers/plugs/
anchors/handles/brackets/clamps/clips/covers/fasteners/guides/hinges/
mountings/locks/knob handles/o-rings/cable ties/clamps/clips/cushions/
emblems/nuts/plates/retainers/rivets/tubing/door lock parts; rubber 
tire sealants/threads/cords/plates/sheets/strip/gaskets/hoses/air 
filter ducts/tubes/belts/tires/mats/o-rings/seals/mouldings/absorbers/
cushions/rings/bellows//mounts/rods/bushings; upholstery leather; 
leather cases/bags; felt paper and paperboards; light-weight coated 
paper; cardboard boxes; printed books/brochures/leaflets/manuals; felt 
strips; manmade fiber felt shapes; felt damping strips; netting of 
twines/ropes; manmade fiber twine, cordage, or rope nettings; nylon 
carpets; tufted other manmade textile carpets/mats; felt carpets; 
manmade fiber tufted and non-tufted carpets/mats; velcro straps; vent 
pads (polyester fleece); umbrellas; mineral wools; asbestos brake 
linings/pads; graphite or other carbon gaskets; glass; mirrors; sun 
visors; glass lenses; sound absorber/insulating articles of fiberglass; 
platinum catalysts; wood screws; steel butt weld fittings/flanges/gas 
containers; iron or steel coupling locks/wire/ropes/cables/roller 
chains/nails/screws/bolts/

[[Page 66258]]

studs/sockets/nuts/rivets/cotter pins/valves/keys/springs/hangers/
clamps/clips/gaskets/o-rings; copper and steel pipe; copper suppression 
band assemblies/o-rings/nuts/screws/earthing strap hinge hatch 
assemblies; aluminum plates/sheets/strips/foil/rivets/blinds/nuts/
exhaust gaskets/decals; wrenches; locks; blank keys; hinges; base metal 
gas springs/mountings/anchors/handles/braces/brackets/clips/locks/
clamps/flange seals/gaskets/o-rings/cradles/throttle caps/frames/guide 
rails/nuts/plates/spacers; internal combustion engines; diesel engines; 
engine blocks/caps/valves/plugs/rings/rods/cylinder heads; telescoping 
linear acting hydraulic cylinders; linear acting cylinders; pumps (fuel 
injection, engine oil, transmission and coolant); brake fluid 
reservoirs; air conditioning (A/C) compressors; fan shrouds; vacuum 
pump inlet connectors; turbocharger pipes; heating ventilation air 
conditioning (HVAC) units; air conditioner parts; HVAC heat exchangers; 
oil coolers; oil filters; motor vehicle A/C accumulators; engine air 
filters; catalytic converters; filters; air filter inlets/housings/
covers; fire extinguishers; washer fluid nozzles/reservoirs; jacks; 
winches; trunk lid spindle drives; cranks; USB hubs; dynamic stability 
or variable damper control devices; auxiliary air valves; solenoid 
valves; throttle housing/thermostat valves; plastic drain cocks; engine 
cooling system housings/thermostats; valve bodies and related parts; 
fuel injector valve parts; bearings; speedometer cables; crankshafts; 
camshafts; bearings; flywheels; engine belt tensioners; automatic 
transmission flexplates; carburetor repair kits; engine support mounts; 
liquid filled engine mounts; wiper motors; mirror drive units; wiper 
motors; electric motors; alternators; parts of fuel pumps; electric 
converters; electric chargers; power supplies; inductors; flexible 
permanent magnets; clutches with solenoid actuators; solenoids; lithium 
manganese dioxide batteries; primary batteries; lead-acid batteries; 
electric storage batteries; lithium-ion batteries/cell module parts; 
vacuum cleaners; spark plugs; starter motors; glow plugs; air 
conditioning generators/distributors/covers/traps; lights; reflectors; 
electric signals; motor vehicle horns; siren sensors; windshield wiper 
systems; headlight frames/inserts/mountings; baffles; control units; 
headlights; wiper arms; lamps; heater assemblies; electric heaters; 
seat cushion heaters; air inlets for intake air filters; cellular/
wireless telephones; telematic infotainment head units and control 
modules; telematics assemblies; global positioning system (GPS) 
assemblies; microphones; loudspeakers; earphone module assemblies; 
amplifiers; speakers; speaker parts; CD changers/players; TV modules/
assemblies; DVD ROMs; cameras; forward looking radar sensors; radio 
navigation equipment; radio remote controls; radios; tape players; CD 
players; video monitors; monitor assemblies; antennas; TV tuner 
modules; signal modules; active sound display modules; remote control 
key shells/covers; alarm systems; electromagnetic interference filter 
assemblies; suppression filter assemblies; electrical resistors and 
related parts; power units/sensors; spark plug connectors; fuses; 
cables; grounds; relays; switches; lamp holders; connectors; elbows; 
connectors/boxes terminals; control switches; housings for electrical/
fuse boxes; bulbs; lamps; electrical filaments; parts of electrical 
filaments/lamps; light emitting diodes; diode parts; integrated 
circuits; cable harnesses; electric cables; harness cables; optic fiber 
cables; ignition lead holders; insulating fittings; trunk lid noise 
suppression filters; chassis fitted with engines; motor vehicle bodies; 
bumper covers/frames/grills/panels/rails/trims; door assemblies/shells/
panels/guides/frames; dashboard assemblies; bracket assemblies; door 
lock rods; cross members; lower arms; panel supports; cargo partitions; 
brake drums/rotors/discs/pads/shoes/calipers/covers/shields; gear 
boxes; oil sumps; axles; shafts; aluminum wheels; steel wheels; wheel 
cap rings; shock absorbers; suspension anti-roll bars/baffles/struts/
control arms/frames/springs/knobs/levers/supports/arms/knuckles/
rollers; radiators and related parts; mufflers; exhaust pipes; clutches 
and related parts; steering wheels/columns/boxes; airbag modules; 
shafts; gear selectors; cables; carriers; flanges; knobs; sleeves; oil 
dipstick tubes; gear shifts; absorbers; air ducts/guides/inlets/
shields/vents; anchors; battery boxes/casings/components/covers/
shelves/trays; cables; brake pedals; brake lines; differential 
carriers; casings; textile child seat protector covers; plastic child 
seat protector covers; clutch pedals/assemblies; drive shafts; pedals; 
coolant pipes/coils; engine covers; textile sun shade curtains; plastic 
sun shade curtains; tow bars/hitches/hooks; dipsticks; drain plugs; 
engine casings/coolant pipes/feed lines/caps; plastic/aluminum/rubber 
floor mats; fuel feed lines/pipes/fillers/caps/hoses/housing filters/
shields/rails/tanks/hoses; heat shields; hitches; manmade fiber cargo 
nets; pedal pads; lenses; signals; optical night vision camera; 
temperature sensors; fuel sensors/gauges; HVAC sensors; air flow 
sensors; gas temperature sensors; gas pressure sensors; oxygen sensors; 
exhaust sensors; night vision modules; sensor parts; instrument 
clusters; heads up display modules; instrument cluster parts; battery 
sensors; accelerometers; sensor rods; power take off (PTO) control 
units; voltage regulators/control units; dashboard clocks; seat sliding 
blocks; leather seats/arm rests/head rests and related parts; textile 
seats/arm rests/head rests and related parts; plastic seats/arm rests/
head rests and related parts; textile child safety seat covers; 
illuminated signs; zipper sliders/zipper fasteners; and, cigarette 
lighters (duty rates range from duty-free to 12.5%).
    The following foreign-sourced materials/components will be admitted 
to the proposed subzone in privileged foreign status (19 CFR 146.41), 
thereby precluding inverted tariff benefits on such items: felt strips 
(HTSUS 5602.10); manmade fiber felt shapes (HTSUS 5602.90); felt 
damping strips (HTSUS 5602.90); netting of twines or ropes (HTSUS 
5608.19); manmade fiber twine/cordage/rope nettings (HTSUS 5608.90); 
nylon carpets (HTSUS 5703.20); tufted other manmade textile carpets/
mats (HTSUS 5703.30); felt carpets (HTSUS 5704.90); manmade fiber 
tufted and non-tufted carpets/mats (HTSUS 5705.00); velcro straps 
(HTSUS 5806.10); vent pads (polyester fleece) (HTSUS 5911.90); textile 
child seat protector covers (HTSUS 8708.99); textile sun shade curtains 
(HTSUS 8708.99); manmade fiber cargo nets (HTSUS 8708.99); textile 
seats/arm rests/head rests and related parts (HTSUS 9401.90); and, 
textile child safety seat covers (HTSUS 9401.90).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is November 7, 
2016.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site which is accessible via www.trade.gov/ftz.
    For further information, contact Diane Finver at 
Diane.Finver@trade.gov or (202) 482-1367.


[[Page 66259]]


    Dated: September 20, 2016.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016-23303 Filed 9-26-16; 8:45 am]
 BILLING CODE 3510-DS-P