Hazardous Materials: Termination of Competent Authority Manufacturing Approvals, 54661-54662 [2016-19414]
Download as PDF
<![CDATA[
Federal Register / Vol. 81, No. 158 / Tuesday, August 16, 2016 / Notices
Materials Safety, (202) 366–4512,
PHMSA, 1200 New Jersey Avenue SE.,
Washington, DC 20590 or at
approvals@dot.gov.
Correspondence with respect to the
below listed approval numbers should
be sent to approvals@dot.gov with a
subject line ‘‘Termination Letter’’ and
should be in writing; state in detail any
alleged errors of fact and law; enclose
any additional information needed to
support the request; and state in detail
the modification of the final decision
sought.
SUPPLEMENTARY INFORMATION:
I. Introduction
In this notice, PHMSA’s Approvals
and Permits Division is terminating the
approvals listed below based on a
change in circumstances rendering the
approval no longer necessary (49 CFR
107.713(b)(1)); and/or violations of your
approval and the HMR that demonstrate
a lack of fitness (49 CFR 107.713(b)(4)).
II. Background
On March 17, 2014, PHMSA held a
mandatory Designated Approvals
Agency (DAA) meeting. In May 2015,
PHMSA mailed a Show Cause letter to
each DAA that did not attend this
meeting, requesting the DAA provide
current operating status. The companies
below did not respond to the Show
Cause letter. In December 2015, PHMSA
issued a Termination letter to each DAA
listed below. As of January 1, 2016,
PHMSA has not received any
correspondence from these DAAs, and
PHMSA terminated the approvals of the
approval holders listed below. This
Federal Register notice serves as an
official announcement of termination of
those approvals.
III. Action
PHMSA has terminated the below
listed approvals, and this Federal
Register notice serves as an official
announcement to the public.
IV. Approvals Terminated
asabaliauskas on DSK3SPTVN1PROD with NOTICES
ID No.
Approval holder/company
107–94–01 ...
IM–9703 .......
IA–0301 ........
IM–9603 .......
IA–8105 ........
IM–9602 .......
Pacific Marine Repair, Inc.
TDI, Inc.
ATech Engineering.
Unicon International.
British Engine.
Commercial Union Insurance Company.
Trimac Transportation Services, Inc.
IA–0401 ........
VerDate Sep<11>2014
20:05 Aug 15, 2016
Jkt 238001
54661
Issued in Washington, DC, on August 10,
2016, under authority delegated in 49 CFR
part 107.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and
Hazardous Materials Safety Administration.
change in circumstances rendering the
approval no longer necessary (49 CFR
107.713(b)(1)); and/or violations of your
approval and the HMR that demonstrate
a lack of fitness (49 CFR 107.713(b)(4)).
[FR Doc. 2016–19415 Filed 8–15–16; 8:45 am]
II. Background
BILLING CODE 4910–60–P
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials
Safety Administration
[Docket No. PHMSA–2016–0040; Notice No.
2016–04]
Hazardous Materials: Termination of
Competent Authority Manufacturing
Approvals
Pipeline and Hazardous
Materials Safety Administration
(PHMSA), DOT.
ACTION: Notice.
AGENCY:
This notice is to advise
interested persons that PHMSA has
terminated the manufacturing approvals
listed herein. In November 2014,
PHMSA attempted to contact all of the
below listed manufacturing approval
holders via written correspondence. In
July 2015, PHMSA issued a Show Cause
letter via certified mail requesting a
response within 30 days with their
intent with respect to the approval.
None of the companies complied with
the requirements of the letter. Thus,
PHMSA issued a Termination letter via
certified mail in January 2016. To date,
PHMSA has not received any
correspondence concerning the below
listed approval numbers.
FOR FURTHER INFORMATION CONTACT: Mr.
Ryan Paquet, Director, Approvals and
Permits Division, Office of Hazardous
Materials Safety, (202) 366–4512,
PHMSA, 1200 New Jersey Avenue SE.,
Washington, DC 20590 or at approvals@
dot.gov.
Correspondence with respect to the
below listed approval numbers should
be sent to approvals@dot.gov with a
subject line ‘‘Termination Letter’’ and
should be in writing; state in detail any
alleged errors of fact and law; enclose
any additional information needed to
support the request; and state in detail
the modification of the final decision
sought.
SUMMARY:
SUPPLEMENTARY INFORMATION:
In November 2014, the Office of
Hazardous Materials Safety Field
Operations (OHMSFO) mailed a letter
requesting approval status of the
companies listed below. The companies
listed below did not respond to the
November 2014 request for information.
In July 2015, PHMSA mailed a Show
Cause letter to each of the companies
listed below, requesting current
approval status. The companies below
did not respond to the Show Cause
letter. In January 2016, PHMSA issued
a Termination letter to each company
listed below. To date, PHMSA has not
received any correspondence from these
companies. This Federal Register notice
serves as an official announcement of
termination of those approvals.
III. Action
PHMSA has terminated the below
listed approvals, and this Federal
Register notice serves as an official
announcement to the public.
IV. Approvals Terminated
ID No.
300b–87–03
300b–96–02
300b–87–01
807–06–01
807–04–06
807–04–04
300b–96–03
300b–92–02
807–07–01
807–08–04
300b–84–03
300b–78–03
807–08–01
300b–88–01
300b–98–03
300b–94–05
300b–83–02
300b–89–03
I. Introduction
300b–93–02
In this notice, PHMSA’s Approvals
and Permits Division is terminating the
approvals listed below based on a
300b–88–02
807–04–01
PO 00000
Frm 00112
Fmt 4703
Sfmt 4703
E:\FR\FM\16AUN1.SGM
16AUN1
Approval holder/company
Industrias Vengas, S. A.
Tanques Para Gas, S.A.
Kanto Koatsu Yoki Mfg. Co.
Hulett Cylinders
Finetec Corporation
Changzhou Aircraft Manufacture Co. Ltd.
Tanques Industriales Lajat,
SA DE CV.
Chengdu High Pressure Vessel Factory.
DACC Co., Ltd.
Guangming Overseas Chinese Farms.
Primus Sievert AB.
MCS Cylinder Systems
GmbH.
Yongkang Yingpeng Chemical
Machinery Co., Ltd.
Implementos Agricolas LA,
S.A.
ROTH S.A.
ISI GmbH.
Cilbras.
Wolfedale Engineering Limited.
DDI Seamless Cylinder International Inc.
Bruin Engineered Parts, Inc.
Yuxin Machinery Co., Ltd.
54662
Federal Register / Vol. 81, No. 158 / Tuesday, August 16, 2016 / Notices
Issued in Washington, DC, on August 10,
2016, under authority delegated in 49 CFR
part 107.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and
Hazardous Materials Safety Administration.
[FR Doc. 2016–19414 Filed 8–15–16; 8:45 am]
BILLING CODE 4910–60–P
DEPARTMENT OF THE TREASURY
Internal Revenue Service
Proposed Collection; Comment
Request for Publication 1075
Internal Revenue Service (IRS),
Treasury.
ACTION: Notice and request for
comments.
AGENCY:
The Department of the
Treasury, as part of its continuing effort
to reduce paperwork and respondent
burden, invites the general public and
other Federal agencies to take this
opportunity to comment on proposed
and/or continuing information
collections, as required by the
Paperwork Reduction Act of 1995,
Public Law 104–13(44 U.S.C.
3506(c)(2)(A)). Currently, the IRS is
soliciting comments concerning
Publication 1075, Tax Information
Security Guidelines for Federal, State,
and Local Agencies.
DATES: Written comments should be
received on or before October 17, 2016
to be assured of consideration.
ADDRESSES: Direct all written comments
to Tuawana Pinkston, Internal Revenue
Service, Room 6527, 1111 Constitution
Avenue NW., Washington, DC 20224.
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the publication should be
directed to R. Joseph Durbala, at Internal
Revenue Service, Room 6129, 1111
Constitution Avenue NW., Washington,
DC 20224, or at (202) 317–5746, or
through the Internet at
RJoseph.Durbala@irs.gov.
SUPPLEMENTARY INFORMATION:
Title: Tax Information Security
Guidelines for Federal, State, and Local
Agencies.
OMB Number: 1545–0962.
Form Number: Publication 1075.
Abstract: Section 6103(p) of the
Internal Revenue Code requires the
Internal Revenue Service to provide
periodic reports to Congress describing
safeguard procedures utilized by
agencies which receive information
from the IRS to protect the
confidentially of the information. This
Code section also requires that these
asabaliauskas on DSK3SPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:36 Aug 15, 2016
Jkt 238001
agencies furnish reports to the IRS
describing their safeguards.
Current Actions: There are no changes
being made to Publication 1075 at this
time.
Type of Review: Extension of a
currently approved collection.
Affected Public: Business or other forprofit organizations, not-for-profit
institutions, and Federal, state, local, or
tribal governments.
Estimated Number of Respondents:
5,100.
Estimated Time per Respondent: 40
hours.
Estimated Total Annual Burden
Hours: 204,000.
The following paragraph applies to all
of the collections of information covered
by this notice:
An agency may not conduct or
sponsor, and a person is not required to
respond to, a collection of information
unless the collection of information
displays a valid OMB control number.
Books or records relating to a collection
of information must be retained as long
as their contents may become material
in the administration of any internal
revenue law. Generally, tax returns and
tax return information are confidential,
as required by 26 U.S.C. 6103.
Request for Comments: Comments
submitted in response to this notice will
be summarized and/or included in the
request for OMB approval. All
comments will become a matter of
public record. Comments are invited on:
(a) Whether the collection of
information is necessary for the proper
performance of the functions of the
agency, including whether the
information shall have practical utility;
(b) the accuracy of the agency’s estimate
of the burden of the collection of
information; (c) ways to enhance the
quality, utility, and clarity of the
information to be collected; (d) ways to
minimize the burden of the collection of
information on respondents, including
through the use of automated collection
techniques or other forms of information
technology; and (e) estimates of capital
or start-up costs and costs of operation,
maintenance, and purchase of services
to provide information.
Approved: August 9, 2016.
R. Joseph Durbala,
IRS, Tax Analyst.
[FR Doc. 2016–19453 Filed 8–15–16; 8:45 am]
BILLING CODE 4830–01–P
PO 00000
Frm 00113
Fmt 4703
Sfmt 4703
DEPARTMENT OF THE TREASURY
Submission for OMB Review;
Comment Request
August 11, 2016.
The Department of the Treasury will
submit the following information
collection request to the Office of
Management and Budget (OMB) for
review and clearance in accordance
with the Paperwork Reduction Act of
1995, Public Law 104–13, on or after the
date of publication of this notice.
DATES: Comments should be received on
or before September 15, 2016 to be
assured of consideration.
ADDRESSES: Send comments regarding
the burden estimates, or any other
aspect of the information collection,
including suggestions for reducing the
burden, to (1) Office of Information and
Regulatory Affairs, Office of
Management and Budget, Attention:
Desk Officer for Treasury, New
Executive Office Building, Room 10235,
Washington, DC 20503, or email at
OIRA_Submission@OMB.EOP.gov and
(2) Treasury PRA Clearance Officer,
1750 Pennsylvania Ave. NW., Suite
8117, Washington, DC 20220, or email
at PRA@treasury.gov.
FOR FURTHER INFORMATION CONTACT:
Copies of the submission may be
obtained by emailing PRA@treasury.gov,
calling (202) 622–1295, or viewing the
entire information collection request at
www.reginfo.gov.
Departmental Offices
OMB Control Number: 1505–0016.
Type of Review: Revision of a
currently approved collection.
Title: Treasury International Capital
Form BQ–1, ‘‘Report of Customers’ U.S.
Dollar Claims on Foreign Residents’’.
Form: Form BQ–1.
Abstract: Form BQ–1 is required by
law and is designed to collect timely
information on international portfolio
capital movements, in particular U.S.
dollar claims of customers of U.S.
resident financial institutions on foreign
residents. The information is necessary
in the computation of the U.S. balance
of payments accounts and the U.S.
international investment position, and
in the formulation of U.S. international
financial and monetary policies.
Affected Public: Businesses or other
for-profits.
Estimated Total Annual Burden
Hours: 1,492.
OMB Control Number: 1505–0017.
Type of Review: Revision of a
currently approved collection.
Title: Treasury International Capital
Form BC, ‘‘Report of U.S. Dollar Claims
E:\FR\FM\16AUN1.SGM
16AUN1
]]>Agencies
[Federal Register Volume 81, Number 158 (Tuesday, August 16, 2016)]
[Notices]
[Pages 54661-54662]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-19414]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
[Docket No. PHMSA-2016-0040; Notice No. 2016-04]
Hazardous Materials: Termination of Competent Authority
Manufacturing Approvals
AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA),
DOT.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice is to advise interested persons that PHMSA has
terminated the manufacturing approvals listed herein. In November 2014,
PHMSA attempted to contact all of the below listed manufacturing
approval holders via written correspondence. In July 2015, PHMSA issued
a Show Cause letter via certified mail requesting a response within 30
days with their intent with respect to the approval. None of the
companies complied with the requirements of the letter. Thus, PHMSA
issued a Termination letter via certified mail in January 2016. To
date, PHMSA has not received any correspondence concerning the below
listed approval numbers.
FOR FURTHER INFORMATION CONTACT: Mr. Ryan Paquet, Director, Approvals
and Permits Division, Office of Hazardous Materials Safety, (202) 366-
4512, PHMSA, 1200 New Jersey Avenue SE., Washington, DC 20590 or at
approvals@dot.gov.
Correspondence with respect to the below listed approval numbers
should be sent to approvals@dot.gov with a subject line ``Termination
Letter'' and should be in writing; state in detail any alleged errors
of fact and law; enclose any additional information needed to support
the request; and state in detail the modification of the final decision
sought.
SUPPLEMENTARY INFORMATION:
I. Introduction
In this notice, PHMSA's Approvals and Permits Division is
terminating the approvals listed below based on a change in
circumstances rendering the approval no longer necessary (49 CFR
107.713(b)(1)); and/or violations of your approval and the HMR that
demonstrate a lack of fitness (49 CFR 107.713(b)(4)).
II. Background
In November 2014, the Office of Hazardous Materials Safety Field
Operations (OHMSFO) mailed a letter requesting approval status of the
companies listed below. The companies listed below did not respond to
the November 2014 request for information. In July 2015, PHMSA mailed a
Show Cause letter to each of the companies listed below, requesting
current approval status. The companies below did not respond to the
Show Cause letter. In January 2016, PHMSA issued a Termination letter
to each company listed below. To date, PHMSA has not received any
correspondence from these companies. This Federal Register notice
serves as an official announcement of termination of those approvals.
III. Action
PHMSA has terminated the below listed approvals, and this Federal
Register notice serves as an official announcement to the public.
IV. Approvals Terminated
------------------------------------------------------------------------
ID No. Approval holder/company
------------------------------------------------------------------------
300b-87-03 Industrias Vengas, S. A.
300b-96-02 Tanques Para Gas, S.A.
300b-87-01 Kanto Koatsu Yoki Mfg. Co.
807-06-01 Hulett Cylinders
807-04-06 Finetec Corporation
807-04-04 Changzhou Aircraft Manufacture Co.
Ltd.
300b-96-03 Tanques Industriales Lajat, SA DE CV.
300b-92-02 Chengdu High Pressure Vessel Factory.
807-07-01 DACC Co., Ltd.
807-08-04 Guangming Overseas Chinese Farms.
300b-84-03 Primus Sievert AB.
300b-78-03 MCS Cylinder Systems GmbH.
807-08-01 Yongkang Yingpeng Chemical Machinery
Co., Ltd.
300b-88-01 Implementos Agricolas LA, S.A.
300b-98-03 ROTH S.A.
300b-94-05 ISI GmbH.
300b-83-02 Cilbras.
300b-89-03 Wolfedale Engineering Limited.
300b-93-02 DDI Seamless Cylinder International
Inc.
300b-88-02 Bruin Engineered Parts, Inc.
807-04-01 Yuxin Machinery Co., Ltd.
------------------------------------------------------------------------
[[Page 54662]]
Issued in Washington, DC, on August 10, 2016, under authority
delegated in 49 CFR part 107.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety
Administration.
[FR Doc. 2016-19414 Filed 8-15-16; 8:45 am]
BILLING CODE 4910-60-P
