Certain New Chemicals; Receipt and Status Information for May 2016, 45148-45153 [2016-16448]
Download as PDF
<![CDATA[
45148
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
the project, with appropriate
environmental measures, would not
constitute a major federal action
significantly affecting the quality of the
human environment.
A copy of the final EA is available for
review at the Commission in the Public
Reference Room or may be viewed on
the Commission’s Web site at
www.ferc.gov using the ‘‘eLibrary’’ link.
Enter the docket number, excluding the
last three digits, in the docket number
field to access the document. For
assistance, contact FERC Online
Support at FERCOnlineSupport@
ferc.gov or toll-free at 1–866–208–3676,
or for TTY, 202–502–8659.
You may also register online at
www.ferc.gov/docs-filing/
esubscription.asp to be notified via
email of new filings and issuances
related to this or other pending projects.
For assistance, contact FERC Online
Support.
For further information, please
contact Chelsea Hudock at (202) 502–
8448 or by email at chelsea.hudock@
ferc.gov or Lee Emery by telephone at
(202) 502–8379 or by email at
lee.emery@ferc.gov.
Dated: July 5, 2016.
Kimberly D. Bose,
Secretary.
[FR Doc. 2016–16396 Filed 7–11–16; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2016–0024; FRL–9948–32]
Certain New Chemicals; Receipt and
Status Information for May 2016
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from May 2,
2016 to May 31, 2016.
DATES: Comments identified by the
specific case number provided in this
document, must be received on or
before August 11, 2016.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
mstockstill on DSK3G9T082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:30 Jul 11, 2016
Jkt 238001
number EPA–HQ–OPPT–2016–0024,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD (7407M) Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the agency taking?
This document provides receipt and
status reports, which cover the period
from May 2, 2016 to May 31, 2016, and
consists of the PMNs and TMEs both
pending and/or expired, and the NOCs
to manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
E:\FR\FM\12JYN1.SGM
12JYN1
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 66 PMNs received by EPA
during this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
45149
PMN; the date the PMN was received by
EPA; the projected end date for EPA’s
review of the PMN; the submitting
manufacturer/importer; the potential
uses identified by the manufacturer/
importer in the PMN; and the chemical
identity.
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016
Date received
Projected end
date for EPA
review
P–16–0387 ..............
5/31/2016
8/29/2016
CBI ..........................
P–16–0393 ..............
5/31/2016
8/29/2016
CBI ..........................
P–16–0102 ..............
P–16–0102 ..............
5/13/2016
5/13/2016
8/11/2016
8/11/2016
CBI ..........................
CBI ..........................
P–16–0102 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0205 ..............
5/17/2016
8/15/2016
CBI ..........................
P–16–0205 ..............
P–16–0205 ..............
P–16–0271 ..............
5/17/2016
5/17/2016
5/20/2016
8/15/2016
8/15/2016
8/18/2016
CBI ..........................
CBI ..........................
CBI ..........................
P–16–0282 ..............
P–16–0323 ..............
5/10/2016
5/17/2016
8/8/2016
8/15/2016
CBI ..........................
Allnex USA, Inc ......
P–16–0348 ..............
5/7/2016
8/5/2016
CBI ..........................
P–16–0349 ..............
5/11/2016
8/9/2016
CBI ..........................
P–16–0350 ..............
5/2/2016
7/31/2016
CBI ..........................
P–16–0351 ..............
5/2/2016
7/31/2016
Solazyme, Inc .........
P–16–0351 ..............
5/2/2016
7/31/2016
Solazyme, Inc .........
P–16–0353 ..............
5/4/2016
8/2/2016
Gantrade Corp. .......
P–16–0354 ..............
P–16–0355 ..............
P–16–0356 ..............
5/5/2016
5/5/2016
5/5/2016
8/3/2016
8/3/2016
8/3/2016
CBI ..........................
CBI ..........................
CBI ..........................
P–16–0357 ..............
5/5/2016
8/3/2016
CBI ..........................
P–16–0358 ..............
5/5/2016
8/3/2016
CBI ..........................
P–16–0359 ..............
5/5/2016
8/3/2016
Dic International,
USA, LLC.
mstockstill on DSK3G9T082PROD with NOTICES
Case No.
VerDate Sep<11>2014
18:30 Jul 11, 2016
Jkt 238001
PO 00000
Manufacturer/
Importer
Frm 00029
Fmt 4703
Use(s)
Chemical identity
(G) Additives for
polymers.
(G) Aliphatic polycarboxylic acid, polymer
with alicyclic polyhydric alcohol and
polyoxyalkylene.
(S) Plasticizer for
(G) Di-substituted benzenedicarboxylic
use with polymers. acid ester.
(G) Ink component .. (G) Polyester acrylate.
(G) Coating compo- (G) Polyester acrylate.
nent.
(G) Adhesive com(G) Polyester acrylate.
ponent.
(S) General indus(G) Amide.
trial oil.
(S) Hydraulic oil ...... (G) Amide.
(G) Lubricant oil ...... (G) Amide.
(S) Flexible pvc
(S) 1,2,4-benzenetricarboxylic acid,
plasticizer for wire 1,2,4-trinonyl ester.
insulation.
(S) Paint dryier ....... (G) Manganese complexes.
(G) Coating resin .... (G) Formaldehyde, reaction products
with substituted carbomonocycle-substituted heteromonocycle-alkylene glycol
bis [[[substituted(oxoneoalky)oxy]alkyl]amino]alky]
ether polymer and alkyl substituted
alkanediamine, acetate (salts).
(G) Industrial lubri(G) Polypentaerythritol, mixed esters with
cant.
linear and branched monoacids.
(G) Fuel additive ..... (G) Quaternary ammonium salt of
polyisobutene succinic acid.
(G) Polymer
(G) Polyaralkyl aryl ester of methacrylic
reactant.
acid.
(G) Renewable oil
(G) Glycerides, c14–18 and c16-c18 unsource for fuels.
saturated, from fermentation.
(G) Feedstock for
(G) Glycerides, c14–18 and c16-c18 unoleochemical insaturated, from fermentation.
dustry.
(S) Chain extender
(S) Benzenamine, 4-[(4-amino-3and curative for
chlorophenyl)methyl]-2-ethyl-.
use in polymer
manufacturing.
(G) Intermediate ..... (G) Esteramine.
(G) Intermediate ..... (G) Esteramine.
(G) Wellbore addi(G) Quaternary ammonium salts.
tive.
(G) Wellbore addi(G) Quaternary ammonium salts.
tive.
(S) Intermediate for
(G) Alkylphenol.
further polymer
reaction.
(G) Pigment additive (G) Carbopolycycle-bis(diazonium),
for industrial coat- dihalo-, chloride (1:2), reaction products
ings.
with metal hydroxide, 4[(dioxoalkyl)amino]substituted benzene,
2-[(dioxoalkyl)amino]substituted benzene,
5-[(dioxoalkyl)amino]-2-hydroxy-substituted benzene and oxo-nphenylalkanamide.
Sfmt 4703
E:\FR\FM\12JYN1.SGM
12JYN1
45150
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Date received
Projected end
date for EPA
review
P–16–0359 ..............
5/5/2016
8/3/2016
P–16–0360 ..............
5/6/2016
P–16–0361 ..............
Manufacturer/
Importer
Use(s)
Chemical identity
Dic International
USA, LLC.
(G) Pigment additives for industrial
coatings.
8/4/2016
Oleon Americas, Inc
(G) Fuel additive .....
5/12/2016
8/10/2016
P–16–0361 ..............
5/12/2016
8/10/2016
5/12/2016
8/10/2016
P–16–0362 ..............
5/12/2016
8/10/2016
P–16–0362 ..............
5/12/2016
8/10/2016
P–16–0362 ..............
5/12/2016
8/10/2016
P–16–0363 ..............
5/10/2016
8/8/2016
American Process,
Inc.
American Process,
Inc.
American Process,
Inc.
American Process,
Inc.
American Process,
Inc.
American Process,
Inc.
CBI ..........................
(G) Plastic reinforcement.
(G) Binders .............
P–16–0361 ..............
P–16–0364 ..............
5/10/2016
8/8/2016
CBI ..........................
(G) Carbopolycycle-bis(diazonium),
dihalo-, chloride (1:2), reaction products
with metal hydroxide, 4[(dioxoalkyl)amino]substituted benzene,
2-[(dioxoalkyl)amino]substituted benzene,
5-[(dioxoalkyl)amino]-2-hydroxy-substituted benzene and oxo-nphenylalkanamide.
(S) Poly (oxy-1,2-ethanediyl), alpha- (1oxodocosyl)- omega- [(1oxodocosyl)oxy]-.
(S) Pulp, cellulose, reaction products
with lignin [nanocrystals].
(S) Pulp, cellulose, reaction products
with lignin [nanocrystals].
(S) Pulp, cellulose, reaction products
with lignin [nanocrystals].
(S) Pulp, cellulose, reaction products
with lignin [nanofibrils].
(S) Pulp, cellulose, reaction products
with lignin [nanofibrils].
(S) Pulp, cellulose, reaction products
with lignin [nanofibrils].
(G) Blocked polyester polyurethane, neutralized.
(G) Nitrile-butadiene-acrylate
terpolymers.
P–16–0365 ..............
5/16/2016
8/14/2016
Allnex USA, Inc ......
P–16–0366 ..............
5/11/2016
8/9/2016
CBI ..........................
P–16–0367 ..............
5/20/2016
8/18/2016
Allnex USA, Inc ......
P–16–0368 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0369 ..............
5/13/2016
8/11/2016
Allnex USA, Inc ......
P–16–0370 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0371 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0372 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0373 ..............
5/13/2016
8/11/2016
CBI ..........................
P–16–0374 ..............
mstockstill on DSK3G9T082PROD with NOTICES
Case No.
5/17/2016
8/15/2016
CBI ..........................
P–16–0375 ..............
5/19/2016
8/17/2016
CBI ..........................
P–16–0376
P–16–0377
P–16–0378
P–16–0379
5/18/2016
5/17/2016
5/17/2016
5/18/2016
8/16/2016
8/15/2016
8/15/2016
8/16/2016
CBI
CBI
CBI
CBI
..............
..............
..............
..............
VerDate Sep<11>2014
18:30 Jul 11, 2016
Jkt 238001
PO 00000
Frm 00030
..........................
..........................
..........................
..........................
Fmt 4703
(G) Viscosifying
agent.
(G) Binders .............
(G) Plastic reinforcement.
(G) Viscosifying
agent.
(G) Open, non-dispersive.
(G) Intermediate
used completely
on site.
(S) Ultra violet curable coating resin.
(G) Open, non-dispersive.
(S) Ultra violet curable coating resin.
(S) Adhesive coating for carpet
backing.
(S) Ultra violet curable coating resin.
(G) Crosslinker for
adhesives and
coatings.
(G) Wetting and dispersing additive.
(G) Wetting and dispersing additive.
(S) Ultra violet absorber for plastic
articles.
(G) Oil additive .......
(G) Binder for seal
application.
(G) Photolithography
(G) Film component
(G) Film component
(G) Intermediate for
polymer synthesis.
Sfmt 4703
E:\FR\FM\12JYN1.SGM
(G) Alkyl carbonate, polymer with, substituted alkanes and substituted
heteromonocycle, substituted alkyl acrylate-blocked.
(G) Blocked polyisocyanate.
(G) Substituted heteromonocylce, polymer with substituted alkane and
ˆ ˜ ˆ ˜ ˆ ˜ ˆ ˜
ethoxylated alkanea¿a¿a¿a¿a¢a¿a¿a
ˆ ˜ ˆ ˜ ˆ ˜ ˆ
¿a¿a¿a¿a¿a¿a¿a¿, substituted hetero
ˆ ˜ ˆ ˜ ˆ ˜ ˆ
monocycle substituted a¿a¿a¿a¿a¢a¿a
ˆ ˜
˜ ˆ ˜ ˆ ˜ ˆ ˆ ˜ ˆ
¿a¿a¿a¿a¿a¿a¿a¿a¿a¿alkyl ester-a¿a
ˆ ˜ ˆ ˜ ˆ ˜ ˆ ˜ ˆ ˜ ˆ ˆ
¿a¿a¿a¢a¿a¿a¿a¿a¿a¿a¿a¿a¿blocked.
(G) Aromatic dicarboxylic acid, polymer
with adipic acid and alkanediol.
(G) Substituted heteromonocycle,
telomer with substituted
carbomonocycles, substituted alkyl ester.
(G) Polysiloxane with functional groups.
(G) Polyphosphoric acids polyether
polyethene alkyl alkyl.
(G) Polyphosphoric acids polyether alkyl
polyethylene polymer.
(G) Tris(alkyloxyphenyl)triazine compounds.
(G) Metal branched alkyl substituted
carbomonocycle complexes with substituted alkyl carbomonocycle.
(G) Alkyl methacrylates, polymer with
olefines.
(G) Hydroxystyrene resin.
(G) Polyester polyol.
(G) Polyester polyol.
(G) Vinyl functional
polymethylalkylpolymer.
12JYN1
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
45151
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Date received
Projected end
date for EPA
review
P–16–0380 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component of
electrocoat resin.
P–16–0381 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component of
electrocoat resin.
P–16–0381 ..............
5/18/2016
8/16/2016
CBI ..........................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0382 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component of
electrocoat resin.
P–16–0382 ..............
5/18/2016
8/16/2016
CBI ..........................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0383 ..............
5/18/2016
8/16/2016
CBI ..........................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0383 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component in
electrocoat resin.
mstockstill on DSK3G9T082PROD with NOTICES
Case No.
VerDate Sep<11>2014
18:30 Jul 11, 2016
Jkt 238001
PO 00000
Manufacturer/
Importer
Frm 00031
Fmt 4703
Use(s)
Sfmt 4703
E:\FR\FM\12JYN1.SGM
Chemical identity
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
acetates (salts).
(G) Propanoic acid, 2-hydroxy-, compds.
with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
formates (salts).
(G) Propanoic acid, 2-hydroxy-, compds.
with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
formates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
acetates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
acetates (salts).
12JYN1
45152
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Date received
Projected end
date for EPA
review
P–16–0384 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component of
an electrocoat
resin.
P–16–0384 ..............
5/18/2016
8/16/2016
CBI ..........................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0385 ..............
5/18/2016
8/16/2016
CBI ..........................
(G) Component of
electrocoat resin.
P–16–0385 ..............
5/18/2016
8/16/2016
CBI ..........................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0386 ..............
5/20/2016
8/18/2016
CBI ..........................
P–16–0388 ..............
5/20/2016
8/18/2016
CBI ..........................
P–16–0389 ..............
5/23/2016
8/21/2016
CBI ..........................
P–16–0390 ..............
5/27/2016
8/25/2016
CBI ..........................
P–16–0391 ..............
5/23/2016
8/21/2016
CBI ..........................
(S) Additive for
motor oil formulations and gear oil
lubricants.
(G) Hardener for
epoxy coating.
(G) Oil & gas extraction.
(S) Coating resin
used in anti-fogging clear coat
applied to automotive parts.
(G) Stabilizer ...........
P–16–0392 ..............
P–16–0394 ..............
5/25/2016
5/31/2016
8/23/2016
8/29/2016
CBI ..........................
CBI ..........................
(G) Wax ..................
(G) Adhesive ...........
mstockstill on DSK3G9T082PROD with NOTICES
Case No.
For the 28 NOCs received by EPA
during this period, Table 3 provides the
following information (to the extent that
such information is not claimed as CBI):
VerDate Sep<11>2014
20:19 Jul 11, 2016
Jkt 238001
Manufacturer/
Importer
Use(s)
The EPA case number assigned to the
NOC; the date the NOC was received by
EPA; the projected date of
commencement provided by the
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
Chemical identity
(G) Propanoic acid, 2-hydroxy-, compds.
with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
formates (salts).
(G) Propanoic acid, 2-hydroxy-, compds.
with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
formates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates (salts).
(G) Formic acid, compds. with
hydrolyzed bisphenol a-epichlorohydrinpolyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3dimethylbutylidene)-n2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2(methylamino)ethanol reaction products
sulfamates (salts).
(S) Hexanedioic acid, 1,6-bis(3,5,5trimethylhexyl) ester.
(G) Aliphatic polyamines, polymers with
bisphenol a and epichlorohydrin.
(G) Polymer of substituted acrylic acid,
mercaptoethanol and bromohexane.
(G) Alkyl alkenoic acid alkyl ester polymer with alkyl alkenoate, dialkyl
alkenamide, hydroxy-modified alkenoic
acid derivative, and sulfonic-modified
alkenoic acid derivative.
(G) Polyester polyol polymer with aliphatic isocyanate and phenol derivates.
(G) Modified vegetable oil.
(G) Benzenedicarboxylic acid, polymer
with decanedioic acid and dodecanedioic
acid, ethanediol, hexanedioic acid,
hexanediol, alpha-hydro-omegahydroxypoly[oxy(methyl-1,2-ethanediyl)],
isobenzofurandione,1,1’-methylenebis[4isocyanatobenzene], phenol and
trimethylbicyclo hept-2-ene.
submitter in the NOC; and the chemical
identity.
E:\FR\FM\12JYN1.SGM
12JYN1
Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
45153
TABLE 2—NOCS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016
Case No.
Date received
P–89–1056 .................................
P–92–0303 .................................
Projected end
date of
commencement
5/9/2016
5/6/2016
8/31/2005
6/23/1992
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
5/6/2016
5/10/2016
5/5/2016
5/5/2016
5/5/2016
5/10/2016
5/10/2016
5/10/2016
5/10/2016
5/10/2016
5/11/2016
5/23/2016
5/19/2016
5/4/2016
4/17/2016
11/18/2014
9/11/2014
6/26/2014
5/3/2016
4/18/2016
4/18/2016
4/18/2016
4/18/2016
2/24/2016
5/2/2016
5/17/2016
P–15–0747 .................................
5/26/2016
5/13/2016
P–16–0056 .................................
P–16–0124 .................................
5/26/2016
5/13/2016
5/5/2016
5/1/2016
P–16–0126 .................................
5/13/2016
5/1/2016
P–16–0135
P–16–0141
P–16–0190
P–16–0210
.................................
.................................
.................................
.................................
5/2/2016
5/4/2016
5/20/2016
5/23/2016
4/14/2016
5/1/2016
4/25/2016
5/11/2016
P–16–0210 .................................
5/23/2016
5/12/2016
P–16–0211 .................................
5/23/2016
5/13/2016
P–16–0212 .................................
5/23/2016
5/17/2016
P–16–0213 .................................
5/23/2016
5/10/2016
P–16–0214 .................................
5/23/2016
5/10/2016
P–99–0096
P–13–0916
P–14–0076
P–14–0078
P–14–0079
P–14–0711
P–14–0855
P–14–0856
P–14–0857
P–14–0858
P–15–0120
P–15–0276
P–15–0303
mstockstill on DSK3G9T082PROD with NOTICES
Authority: 15 U.S.C. 2601 et seq.
Dated: July 5, 2016.
Pamela S. Myrick,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2016–16448 Filed 7–11–16; 8:45 am]
BILLING CODE 6560–50–P
VerDate Sep<11>2014
18:30 Jul 11, 2016
Chemical identity
(G) Polyurethane.
(S) Phenol, 2,4,6-tris[(dimethylamino)methyl]-, reaction products with
benzyl chloride.
(G) Amine-modified polyether acrylate.
(G) Polyurethane.
(G) Synthetic polyol esters.
(G) Synthetic polyol ester.
(G) Synthetic polyol esters.
(G) Polyurethane.
(G) Polyurethane.
(G) Polyurethane.
(G) Polyurethane.
(G) Polyurethane.
(G) Substituted benzyl acrylate.
(G) Functionalized carbon nanotubes.
(S) Cellulose, carboxymethyl ether, sodium salt, polymer with
bis(isocyanatomethyl)benzene, 2,2-dimethoxyacetaldehyde, ethanedial,
2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 2-oxoacetic acid, 1h-1,2,4-triazole-3,5-diamine and 1,3,5-triazine-2,4,6-triamine.
(G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and
sodium silicate.
(G) Dialkyl fattyalkylamino propanamide alkylamine acetates.
(G) Substituted alkanoic acid-, salts with substituted alkanol-blocked
haloalkyl heteromonocycle substituted carbomonocycle polymer alkyl
alkanoate substituted carbomonocycle-trialkylcarbomonocycle-alkyl
imine reaction products.
(G) Substituted carbomonocycle, polymer with substituted
heteromonocycle, reaction products with substituted amine, substituted
amine and substituted alkanol, alkylalkanoates substituted
carbomonocycle.
(G) Polyesters, fatty alkyl amindes terminated.
(G) Polyalkyl methacrylate copolymer.
(G) Aryl polyolefin.
(G) Alkanepolycarboxylic acids, polymer with alkanepolyols,
benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and
polyether polyols, benzenedicarboxylic acid derivative and
caprolactone.
(G) Alkanepolycarboxylic acids, polymer with alkanepolyols,
benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and
polyether polyols, benzenedicarboxylic acid derivative and
caprolactone.
(G) Polymer of alkyl acrylate, caprolactone,
methylenebis[isocyanatobenzene], alkyl methacrylates, polyether polyol,
alkanepolycarboxylic acid, substituted methacrylate and alkanepolyol.
(G) Polymer of alkanepolyols, methylenebis[isocyantobenzene],
polyether polyol, alkyl methacrylates and acrylate, methacrylic acid,
substitued methacrylic acid and alkanepolycarboxylic acid.
(G) Polymer of substituted benzenes, alkanepolyols,
alkanepolycarboxylic acids, methylenebis[isocyanatobenzene], polyether
polyol, neopentyl glycol and a substituted glycol.
(G) Polyether polyols, polymers with substituted benzenes,
methylenebis[isocyanatobenzene], alkanepolyols, caprolactone and a
substituted glycol.
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2016–0345; FRL–9948–04]
Pesticide Maintenance Fee: Notice of
Receipt of Requests to Voluntarily
Cancel Certain Pesticide Registrations
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
Jkt 238001
PO 00000
Frm 00033
Fmt 4703
Sfmt 4703
In accordance with the
Federal Insecticide, Fungicide, and
Rodenticide Act (FIFRA), EPA is issuing
a notice of receipt of requests by
registrants to voluntarily cancel certain
pesticide registrations. EPA intends to
grant these requests at the close of the
comment period for this announcement
unless the Agency receives substantive
comments within the comment period
that would merit its further review of
SUMMARY:
E:\FR\FM\12JYN1.SGM
12JYN1
]]>Agencies
[Federal Register Volume 81, Number 133 (Tuesday, July 12, 2016)]
[Notices]
[Pages 45148-45153]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-16448]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0024; FRL-9948-32]
Certain New Chemicals; Receipt and Status Information for May
2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from May 2, 2016 to May 31, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before August 11, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0024, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD (7407M) Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the agency taking?
This document provides receipt and status reports, which cover the
period from May 2, 2016 to May 31, 2016, and consists of the PMNs and
TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
[[Page 45149]]
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 66 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; the
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From May 2, 2016 to May 31, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date for EPA Manufacturer/ Importer Use(s) Chemical identity
review
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0387............................ 5/31/2016 8/29/2016 CBI..................... (G) Additives for (G) Aliphatic polycarboxylic
polymers. acid, polymer with alicyclic
polyhydric alcohol and
polyoxyalkylene.
P-16-0393............................ 5/31/2016 8/29/2016 CBI..................... (S) Plasticizer for use (G) Di-substituted
with polymers. benzenedicarboxylic acid
ester.
P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Ink component....... (G) Polyester acrylate.
P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Coating component... (G) Polyester acrylate.
P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Adhesive component.. (G) Polyester acrylate.
P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (S) General industrial (G) Amide.
oil.
P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (S) Hydraulic oil....... (G) Amide.
P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (G) Lubricant oil....... (G) Amide.
P-16-0271............................ 5/20/2016 8/18/2016 CBI..................... (S) Flexible pvc (S) 1,2,4-
plasticizer for wire benzenetricarboxylic acid,
insulation. 1,2,4-trinonyl ester.
P-16-0282............................ 5/10/2016 8/8/2016 CBI..................... (S) Paint dryier........ (G) Manganese complexes.
P-16-0323............................ 5/17/2016 8/15/2016 Allnex USA, Inc......... (G) Coating resin....... (G) Formaldehyde, reaction
products with substituted
carbomonocycle-substituted
heteromonocycle-alkylene
glycol bis
[[[substituted(oxoneoalky)ox
y]alkyl]amino]alky] ether
polymer and alkyl
substituted alkanediamine,
acetate (salts).
P-16-0348............................ 5/7/2016 8/5/2016 CBI..................... (G) Industrial lubricant (G) Polypentaerythritol,
mixed esters with linear and
branched monoacids.
P-16-0349............................ 5/11/2016 8/9/2016 CBI..................... (G) Fuel additive....... (G) Quaternary ammonium salt
of polyisobutene succinic
acid.
P-16-0350............................ 5/2/2016 7/31/2016 CBI..................... (G) Polymer reactant.... (G) Polyaralkyl aryl ester of
methacrylic acid.
P-16-0351............................ 5/2/2016 7/31/2016 Solazyme, Inc........... (G) Renewable oil source (G) Glycerides, c14-18 and
for fuels. c16-c18 unsaturated, from
fermentation.
P-16-0351............................ 5/2/2016 7/31/2016 Solazyme, Inc........... (G) Feedstock for (G) Glycerides, c14-18 and
oleochemical industry. c16-c18 unsaturated, from
fermentation.
P-16-0353............................ 5/4/2016 8/2/2016 Gantrade Corp........... (S) Chain extender and (S) Benzenamine, 4-[(4-amino-
curative for use in 3-chlorophenyl)methyl]-2-
polymer manufacturing. ethyl-.
P-16-0354............................ 5/5/2016 8/3/2016 CBI..................... (G) Intermediate........ (G) Esteramine.
P-16-0355............................ 5/5/2016 8/3/2016 CBI..................... (G) Intermediate........ (G) Esteramine.
P-16-0356............................ 5/5/2016 8/3/2016 CBI..................... (G) Wellbore additive... (G) Quaternary ammonium
salts.
P-16-0357............................ 5/5/2016 8/3/2016 CBI..................... (G) Wellbore additive... (G) Quaternary ammonium
salts.
P-16-0358............................ 5/5/2016 8/3/2016 CBI..................... (S) Intermediate for (G) Alkylphenol.
further polymer
reaction.
P-16-0359............................ 5/5/2016 8/3/2016 Dic International, USA, (G) Pigment additive for (G) Carbopolycycle-
LLC. industrial coatings. bis(diazonium), dihalo-,
chloride (1:2), reaction
products with metal
hydroxide, 4-
[(dioxoalkyl)amino]substitut
ed benzene, 2-
[(dioxoalkyl)amino]substitut
ed benzene, 5-
[(dioxoalkyl)amino]-2-
hydroxy-substituted benzene
and oxo-n-phenylalkanamide.
[[Page 45150]]
P-16-0359............................ 5/5/2016 8/3/2016 Dic International USA, (G) Pigment additives (G) Carbopolycycle-
LLC. for industrial coatings. bis(diazonium), dihalo-,
chloride (1:2), reaction
products with metal
hydroxide, 4-
[(dioxoalkyl)amino]substitut
ed benzene, 2-
[(dioxoalkyl)amino]substitut
ed benzene, 5-
[(dioxoalkyl)amino]-2-
hydroxy-substituted benzene
and oxo-n-phenylalkanamide.
P-16-0360............................ 5/6/2016 8/4/2016 Oleon Americas, Inc..... (G) Fuel additive....... (S) Poly (oxy-1,2-
ethanediyl), alpha- (1-
oxodocosyl)- omega- [(1-
oxodocosyl)oxy]-.
P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Plastic (S) Pulp, cellulose, reaction
reinforcement. products with lignin
[nanocrystals].
P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Binders............. (S) Pulp, cellulose, reaction
products with lignin
[nanocrystals].
P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Viscosifying agent.. (S) Pulp, cellulose, reaction
products with lignin
[nanocrystals].
P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Binders............. (S) Pulp, cellulose, reaction
products with lignin
[nanofibrils].
P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Plastic (S) Pulp, cellulose, reaction
reinforcement. products with lignin
[nanofibrils].
P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Viscosifying agent.. (S) Pulp, cellulose, reaction
products with lignin
[nanofibrils].
P-16-0363............................ 5/10/2016 8/8/2016 CBI..................... (G) Open, non-dispersive (G) Blocked polyester
polyurethane, neutralized.
P-16-0364............................ 5/10/2016 8/8/2016 CBI..................... (G) Intermediate used (G) Nitrile-butadiene-
completely on site. acrylate terpolymers.
P-16-0365............................ 5/16/2016 8/14/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Alkyl carbonate, polymer
coating resin. with, substituted alkanes
and substituted
heteromonocycle, substituted
alkyl acrylate-blocked.
P-16-0366............................ 5/11/2016 8/9/2016 CBI..................... (G) Open, non-dispersive (G) Blocked polyisocyanate.
P-16-0367............................ 5/20/2016 8/18/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Substituted
coating resin. heteromonocylce, polymer
with substituted alkane and
ethoxylated
alkane[acirc][iquest][atilde
][iquest][acirc][iquest][ati
lde][iquest][acirc][cent][at
ilde][iquest][acirc][iquest]
[atilde][iquest][acirc][ique
st][atilde][iquest][acirc][i
quest][atilde][iquest][acirc
][iquest][atilde][iquest][ac
irc][iquest], substituted
heteromonocycle substituted
[acirc][iquest][atilde][ique
st][acirc][iquest][atilde][i
quest][acirc][cent][atilde][
iquest][acirc][iquest][atild
e][iquest][acirc][iquest][at
ilde][iquest][acirc][iquest]
[atilde][iquest][acirc][ique
st][acirc][iquest][atilde][i
quest][acirc][iquest]alkyl
ester-
[acirc][iquest][atilde][ique
st][acirc][iquest][atilde][i
quest][acirc][cent][atilde][
iquest][acirc][iquest][atild
e][iquest][acirc][iquest][at
ilde][iquest][acirc][iquest]
[atilde][iquest][acirc][ique
st][acirc][iquest]blocked.
P-16-0368............................ 5/13/2016 8/11/2016 CBI..................... (S) Adhesive coating for (G) Aromatic dicarboxylic
carpet backing. acid, polymer with adipic
acid and alkanediol.
P-16-0369............................ 5/13/2016 8/11/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Substituted
coating resin. heteromonocycle, telomer
with substituted
carbomonocycles, substituted
alkyl ester.
P-16-0370............................ 5/13/2016 8/11/2016 CBI..................... (G) Crosslinker for (G) Polysiloxane with
adhesives and coatings. functional groups.
P-16-0371............................ 5/13/2016 8/11/2016 CBI..................... (G) Wetting and (G) Polyphosphoric acids
dispersing additive. polyether polyethene alkyl
alkyl.
P-16-0372............................ 5/13/2016 8/11/2016 CBI..................... (G) Wetting and (G) Polyphosphoric acids
dispersing additive. polyether alkyl polyethylene
polymer.
P-16-0373............................ 5/13/2016 8/11/2016 CBI..................... (S) Ultra violet (G)
absorber for plastic Tris(alkyloxyphenyl)triazine
articles. compounds.
P-16-0374............................ 5/17/2016 8/15/2016 CBI..................... (G) Oil additive........ (G) Metal branched alkyl
substituted carbomonocycle
complexes with substituted
alkyl carbomonocycle.
P-16-0375............................ 5/19/2016 8/17/2016 CBI..................... (G) Binder for seal (G) Alkyl methacrylates,
application. polymer with olefines.
P-16-0376............................ 5/18/2016 8/16/2016 CBI..................... (G) Photolithography.... (G) Hydroxystyrene resin.
P-16-0377............................ 5/17/2016 8/15/2016 CBI..................... (G) Film component...... (G) Polyester polyol.
P-16-0378............................ 5/17/2016 8/15/2016 CBI..................... (G) Film component...... (G) Polyester polyol.
P-16-0379............................ 5/18/2016 8/16/2016 CBI..................... (G) Intermediate for (G) Vinyl functional
polymer synthesis. polymethylalkylpolymer.
[[Page 45151]]
P-16-0380............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
P-16-0381............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Propanoic acid, 2-hydroxy-
electrocoat resin. , compds. with hydrolyzed
bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0381............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Propanoic acid, 2-hydroxy-
for automotive , compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0382............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products sulfamates
(salts).
P-16-0382............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products sulfamates
(salts).
P-16-0383............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
P-16-0383............................ 5/18/2016 8/16/2016 CBI..................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
[[Page 45152]]
P-16-0384............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of an (G) Propanoic acid, 2-hydroxy-
electrocoat resin. , compds. with hydrolyzed
bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0384............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Propanoic acid, 2-hydroxy-
for automotive , compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0385............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products sulfamates
(salts).
P-16-0385............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products sulfamates
(salts).
P-16-0386............................ 5/20/2016 8/18/2016 CBI..................... (S) Additive for motor (S) Hexanedioic acid, 1,6-
oil formulations and bis(3,5,5-trimethylhexyl)
gear oil lubricants. ester.
P-16-0388............................ 5/20/2016 8/18/2016 CBI..................... (G) Hardener for epoxy (G) Aliphatic polyamines,
coating. polymers with bisphenol a
and epichlorohydrin.
P-16-0389............................ 5/23/2016 8/21/2016 CBI..................... (G) Oil & gas extraction (G) Polymer of substituted
acrylic acid,
mercaptoethanol and
bromohexane.
P-16-0390............................ 5/27/2016 8/25/2016 CBI..................... (S) Coating resin used (G) Alkyl alkenoic acid alkyl
in anti-fogging clear ester polymer with alkyl
coat applied to alkenoate, dialkyl
automotive parts. alkenamide, hydroxy-modified
alkenoic acid derivative,
and sulfonic-modified
alkenoic acid derivative.
P-16-0391............................ 5/23/2016 8/21/2016 CBI..................... (G) Stabilizer.......... (G) Polyester polyol polymer
with aliphatic isocyanate
and phenol derivates.
P-16-0392............................ 5/25/2016 8/23/2016 CBI..................... (G) Wax................. (G) Modified vegetable oil.
P-16-0394............................ 5/31/2016 8/29/2016 CBI..................... (G) Adhesive............ (G) Benzenedicarboxylic acid,
polymer with decanedioic
acid and dodecanedioic acid,
ethanediol, hexanedioic
acid, hexanediol, alpha-
hydro-omega-
hydroxypoly[oxy(methyl-1,2-
ethanediyl)],
isobenzofurandione,1,1'-
methylenebis[4-
isocyanatobenzene], phenol
and trimethylbicyclo hept-2-
ene.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 28 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
[[Page 45153]]
Table 2--NOCs Received From May 2, 2016 to May 31, 2016
----------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date of Chemical identity
commencement
----------------------------------------------------------------------------------------------------------------
P-89-1056................................. 5/9/2016 8/31/2005 (G) Polyurethane.
P-92-0303................................. 5/6/2016 6/23/1992 (S) Phenol, 2,4,6-
tris[(dimethylamino)methyl]-,
reaction products with benzyl
chloride.
P-99-0096................................. 5/6/2016 5/4/2016 (G) Amine-modified polyether
acrylate.
P-13-0916................................. 5/10/2016 4/17/2016 (G) Polyurethane.
P-14-0076................................. 5/5/2016 11/18/2014 (G) Synthetic polyol esters.
P-14-0078................................. 5/5/2016 9/11/2014 (G) Synthetic polyol ester.
P-14-0079................................. 5/5/2016 6/26/2014 (G) Synthetic polyol esters.
P-14-0711................................. 5/10/2016 5/3/2016 (G) Polyurethane.
P-14-0855................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P-14-0856................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P-14-0857................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P-14-0858................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P-15-0120................................. 5/11/2016 2/24/2016 (G) Substituted benzyl acrylate.
P-15-0276................................. 5/23/2016 5/2/2016 (G) Functionalized carbon
nanotubes.
P-15-0303................................. 5/19/2016 5/17/2016 (S) Cellulose, carboxymethyl
ether, sodium salt, polymer with
bis(isocyanatomethyl)benzene,
2,2-dimethoxyacetaldehyde,
ethanedial, 2-ethyl-2-
(hydroxymethyl)-1,3-propanediol,
2-oxoacetic acid, 1h-1,2,4-
triazole-3,5-diamine and 1,3,5-
triazine-2,4,6-triamine.
P-15-0747................................. 5/26/2016 5/13/2016 (G) Naturally-occurring minerals,
reaction products with boron
sodium oxide (b4na2o7), hetero
substituted alkyl acrylate
polymer, kaolin and sodium
silicate.
P-16-0056................................. 5/26/2016 5/5/2016 (G) Dialkyl fattyalkylamino
propanamide alkylamine acetates.
P-16-0124................................. 5/13/2016 5/1/2016 (G) Substituted alkanoic acid-,
salts with substituted alkanol-
blocked haloalkyl
heteromonocycle substituted
carbomonocycle polymer alkyl
alkanoate substituted
carbomonocycle-
trialkylcarbomonocycle-alkyl
imine reaction products.
P-16-0126................................. 5/13/2016 5/1/2016 (G) Substituted carbomonocycle,
polymer with substituted
heteromonocycle, reaction
products with substituted amine,
substituted amine and
substituted alkanol,
alkylalkanoates substituted
carbomonocycle.
P-16-0135................................. 5/2/2016 4/14/2016 (G) Polyesters, fatty alkyl
amindes terminated.
P-16-0141................................. 5/4/2016 5/1/2016 (G) Polyalkyl methacrylate
copolymer.
P-16-0190................................. 5/20/2016 4/25/2016 (G) Aryl polyolefin.
P-16-0210................................. 5/23/2016 5/11/2016 (G) Alkanepolycarboxylic acids,
polymer with alkanepolyols,
benzenedicarboxylic acid,
methylenebis[isocyantobenzene],
mono- and polyether polyols,
benzenedicarboxylic acid
derivative and caprolactone.
P-16-0210................................. 5/23/2016 5/12/2016 (G) Alkanepolycarboxylic acids,
polymer with alkanepolyols,
benzenedicarboxylic acid,
methylenebis[isocyantobenzene],
mono- and polyether polyols,
benzenedicarboxylic acid
derivative and caprolactone.
P-16-0211................................. 5/23/2016 5/13/2016 (G) Polymer of alkyl acrylate,
caprolactone,
methylenebis[isocyanatobenzene],
alkyl methacrylates, polyether
polyol, alkanepolycarboxylic
acid, substituted methacrylate
and alkanepolyol.
P-16-0212................................. 5/23/2016 5/17/2016 (G) Polymer of alkanepolyols,
methylenebis[isocyantobenzene],
polyether polyol, alkyl
methacrylates and acrylate,
methacrylic acid, substitued
methacrylic acid and
alkanepolycarboxylic acid.
P-16-0213................................. 5/23/2016 5/10/2016 (G) Polymer of substituted
benzenes, alkanepolyols,
alkanepolycarboxylic acids,
methylenebis[isocyanatobenzene],
polyether polyol, neopentyl
glycol and a substituted glycol.
P-16-0214................................. 5/23/2016 5/10/2016 (G) Polyether polyols, polymers
with substituted benzenes,
methylenebis[isocyanatobenzene],
alkanepolyols, caprolactone and
a substituted glycol.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: July 5, 2016.
Pamela S. Myrick,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2016-16448 Filed 7-11-16; 8:45 am]
BILLING CODE 6560-50-P
