Approval of Subzone Status; Cabela's Inc.; Tooele, Utah, 39889-39890 [2016-14530]

Download as PDF Federal Register / Vol. 81, No. 118 / Monday, June 20, 2016 / Notices (FY) 2016. The document contained incorrect dates. FOR FURTHER INFORMATION CONTACT: For further information contact Amy McWilliams, Management Analyst, 1400 Independence Avenue SW., STOP 1568, Room 0226–S, Washington, DC 20250– 1568. Telephone: (202) 205–8663; email: amy.mcwilliams@wdc.usda.gov. Corrections In the Federal Register of June 14, 2016, in the FR Doc. 2016–14009, make the following corrections to read as follows: 1. On page 38660, in the third column, correct the DATES caption to read: Completed applications must be received by RUS no later than 5:00 p.m. Eastern Daylight Time (EDT) on Friday, July 15, 2016. DATES: 2. On page 38660, in the third column, in the Overview section, correct the Due Date for Applications caption to read: Due Date for Applications: Applications must be received by RUS by 5:00 p.m. Eastern Daylight Time (EDT) on Friday, July 15, 2016. 3. On page 38661, column one, in the II. Award Information section, correct the Application Date caption to read: Application Date: Applications must be received by RUS by no later than 5:00 p.m. Eastern Daylight Time (EDT) on Friday, July 15, 2016. honoring the 65th anniversary of VOA’s Georgian Service, a resolution honoring the 20th anniversary of VOA’s Bosnian Service, and a resolution honoring the 15th anniversary of Radio the Radio Free Europe/Radio Liberty Balkan Service’s Macedonian Unit. The Board will receive a report from the Chief Executive Officer and Director of BBG. The Board will also hear from representatives of the BBG’s networks regarding the BBG’s impact model, including examples or areas where BBG has had impact through its journalism as well as impact as a driving ethos for BBG’s journalism. This meeting will be available for public observation via streamed webcast, both live and on-demand, on the agency’s public Web site at www.bbg.gov. Information regarding this meeting, including any updates or adjustments to its starting time, can also be found on the agency’s public Web site. The public may also attend this meeting in person at the address listed above as seating capacity permits. Members of the public seeking to attend the meeting in person must register at http://bbgboardmeetingjune2016.event brite.com by 12:00 p.m. (EDT) on June 22. For more information, please contact BBG Public Affairs at (202) 203–4400 or by email at pubaff@bbg.gov. CONTACT PERSON FOR MORE INFORMATION: Persons interested in obtaining more information should contact Oanh Tran at (202) 203–4545. Dated: June 14, 2016. Brandon McBride, Administrator, Rural Utilities Service. Oanh Tran, Director of Board Operations. [FR Doc. 2016–14491 Filed 6–17–16; 8:45 am] BILLING CODE 8610–01–P [FR Doc. 2016–14652 Filed 6–16–16; 4:15 pm] BILLING CODE P DEPARTMENT OF COMMERCE BROADCASTING BOARD OF GOVERNORS Submission for OMB Review; Comment Request Government in the Sunshine Act Meeting Notice Thursday, June 23, 2016, 9:45 a.m.–12:00 p.m. EDT. PLACE: Cohen Building, Room 3321, 330 Independence Ave. SW., Washington, DC 20237. SUBJECT: Notice of Meeting of the Broadcasting Board of Governors. SUMMARY: The Broadcasting Board of Governors (Board) will be meeting at the time and location listed above. The Board will vote on a consent agenda consisting of the minutes of its April 20, 2016 meeting, a resolution honoring the 65th anniversary of Voice of America’s (VOA) Armenian Service, a resolution asabaliauskas on DSK3SPTVN1PROD with NOTICES DATE AND TIME: VerDate Sep<11>2014 17:05 Jun 17, 2016 Jkt 238001 The Department of Commerce will submit to the Office of Management and Budget (OMB) for clearance the following proposal for collection of information under the provisions of the Paperwork Reduction Act (44 U.S.C. Chapter 35). Agency: International Trade Administration. Title: Procedures for Importation of Supplies for Use in Emergency Relief Work. Form Number(s): N/A. OMB Control Number: 0625–0256. Type of Request: Regular Submission. Burden Hours: 15. Number of Respondents: 1. Average Hours per Response: 15. PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 39889 Needs and Uses: The regulations (19 CFR 358.101–104) provide procedures for requesting the Secretary of Commerce to permit the importation of supplies, such as food, clothing, and medical, surgical, and other supplies, for use in emergency relief work free of antidumping and countervailing duties. Affected Public: Business or other forprofit organizations. Frequency: Varies. Respondent’s Obligation: Voluntary. This information collection request may be viewed at www.reginfo.gov. Follow the instructions to view the Department of Commerce collections currently under review by OMB. Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to OIRA Submission@ omb.eop.gov or fax to (202) 395–5806. Dated: June 15, 2016. Glenna Mickelson, Management Analyst, Office of the Chief Information Officer. [FR Doc. 2016–14462 Filed 6–17–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 2001] Approval of Subzone Status; Cabela’s Inc.; Tooele, Utah Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Foreign-Trade Zones Act provides for ‘‘. . . the establishment . . . of foreign-trade zones in ports of entry of the United States, to expedite and encourage foreign commerce, and for other purposes,’’ and authorizes the Foreign-Trade Zones Board to grant to qualified corporations the privilege of establishing foreign-trade zones in or adjacent to U.S. Customs and Border Protection ports of entry; Whereas, the Board’s regulations (15 CFR part 400) provide for the establishment of subzones for specific uses; Whereas, the Salt Lake City Corporation, grantee of Foreign-Trade Zone 30, has made application to the Board for the establishment of a subzone at the facility of Cabela’s Inc., located in Tooele, Utah, (FTZ Docket B–03–2016, docketed January 20, 2016); Whereas, notice inviting public comment has been given in the Federal E:\FR\FM\20JNN1.SGM 20JNN1 39890 Federal Register / Vol. 81, No. 118 / Monday, June 20, 2016 / Notices Register (81 FR 4250, January 26, 2016) and the application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendations of the examiner’s memorandum, and finds that the requirements of the FTZ Act and the Board’s regulations are satisfied; Now, therefore, the Board hereby approves subzone status at the facility of Cabela’s Inc., located in Tooele, Utah (Subzone 30B), as described in the application and Federal Register notice, subject to the FTZ Act and the Board’s regulations, including Section 400.13. Signed at Washington, DC, this 2nd day of June 2016. Paul Piquado, Assistant Secretary of Commerce for Enforcement and Compliance, Alternate Chairman, Foreign-Trade Zones Board. Andrew McGilvray, Executive Secretary. [FR Doc. 2016–14530 Filed 6–17–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–40–2016] asabaliauskas on DSK3SPTVN1PROD with NOTICES Foreign-Trade Zone (FTZ) 133—QuadCities, Iowa/Illinois; Notification of Proposed Production Activity; Deere & Company; Subzone 133F (Construction and Forestry Equipment); Dubuque, Iowa Deere & Company (Deere), operator of Subzone 133F, submitted a notification of proposed production activity to the FTZ Board for its facility within Subzone 133F, located in Dubuque, Iowa. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on May 26, 2016. The facility is used for the production of construction and forestry equipment. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Deere from customs duty payments on the foreign-status components used in export production. On its domestic sales, Deere would be able to choose the duty rate during customs entry procedures that applies to backhoes, crawler dozers, crawler loaders, skid steer loaders, tracked feller bunchers, tracked harvesters, VerDate Sep<11>2014 17:05 Jun 17, 2016 Jkt 238001 knuckleboom loaders (and their cabs) (duty free) for the foreign-status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Silicone dosing module hoses; polyvinyl chloride reflectors; plastic labels/plugs/ push button switches/washers/input shaft seals/rings/vent breather clamps/ bearings; rubber hoses/hose pipes/ transmission hose tubes/rings/o-rings/oring kits/dust seals/gaskets/o-ring packings/brake seals/differential assembly shaft seals/oil pan gaskets/ seals/guide rings/seal kits/u-rings/boots/ bump shifter boots/damper absorbers/ door stop bumpers/grommets/ring supports/isolators/mount absorbers/ mount isolators; cork gaskets; paper gaskets/seals/installation instructions; adhesive paper anti-skid pads; nonasbestos friction disks; glass rear view mirrors; steel hydraulic reservoir tanks/ wiring harness cables/alloy rippers/ scarifier plates/alloy u-bolts/screws/ bolts/studs/plugs/nuts/retainer plate & nut assemblies/fittings/bushings/ springs/lock plates/washers/shims/pins/ rings/clutch rollers/kingpins/fasteners/ retainers/clamps/straps/caps/balls/ beaded adapters/bucket tooth adapter kits/flanges/spacers/cylinder shaft seals/ shafts/hose supports/joint assemblies/oring fittings/push beam trunnions/ return oil lines/ring forks/shim kits/ sleeves/splined couplings/couplers/ threaded nipples/toolboxes/toolbox assemblies/toolbox lid covers; cast iron raw castings; iron mounting adapters; bronze bushings; copper electric connectors; aluminum valve housings; disk saw teeth; insert teeth; tooth kits; center cutting edges; outer cutting edges; bucket locks; fitting keys; hinge leaves; gas-operated cylinders; brackets; boom stops; latches; dust caps; fuel filler caps; identification plates; diesel engines; gear box pistons; air cleaner hoses; air intake assemblies; air intake stacks; diesel exhaust fluid pressure lines; duct plate manifolds; exhaust gas recirculation clamps; foot well assemblies; fuel lines; oil pans; orifices; piston rings; thermostat assembly covers; thermostat housings; valve covers; hydraulic cylinders; steering cylinders; thumb kit clamps; fan drive motors; hydraulic motors; hydrostatic motors; hydraulic cylinder kits; hydraulic cylinder ports; oil line assemblies; parking brake pistons; steering cylinder kits; steering cylinder rods; cooler bypass manifolds; hydraulic manifolds; hydraulic oil tubes; hydraulic vent assembly tubes; oil line tubes; pressure manifolds; return line PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 hydraulic tubes; return manifolds; reservoir tanks; fuel injection pumps; fuel pumps; oil pumps; regulating valves; gear pumps; hydraulic pumps; main pumps; diesel exhaust fluid lines; charge pump piston rings; disk brake pistons; hydraulic reservoirs; pump shafts; steering cylinder barrels; compressors; blower fan assemblies; exhaust stack diffusers; air conditioners; vapor condensers; evaporator coils; heater/evaporator coils; refrigerant hoses; heater coils; hose assembly breathers; joint breathers; aluminum charge air coolers; heat exchangers; hydraulic oil coolers; oil coolers; condenser cores; fuel filters; fuel inlet tubes; oil filters; oil filter elements; receiver-dryers; transmission oil filters; air cleaners; transmission pump filters; catalytic converters; filter elements; filter heads; air intake guards; boom tubes; catwalk platforms; counterweights; counterweight weldments; door grills; grapple rotators; heel supports; housing weldments; hydraulic boom tubes; hydraulic oil lines; hydraulic reservoirs for forestry equipment; jib boom assemblies; log loader grapples; lower frame cover plates; main boom assemblies; manifold core returns; muffler adapters; pressure tubes; reinforcement plates; stabilizer assemblies; stabilizer manifolds; suction tubes; upper frames; bucket ripper teeth; flare bucket teeth; multi-purpose buckets; backhoe buckets; excavator buckets; loader buckets; skid steer buckets; cutting edge end bits; dozer blades; dozer blade cutting edges; duramax blade cutting edges; fork assemblies; hydraulic clamp kits; pallet forks; pallet fork tines; ripper shank assemblies; bucket teeth; axles; axle casings; axle housings; axles with differential; ball joints; battery boxes; battery disconnect brackets; boom locks; bottom rollers; brackets; brake assembly shims; brake disks; bucket links; bucket sensor tubes; bucket tooth adapters; bucket tooth plugs; bucket tooth retainers; cast brackets; clutch assembly bearing covers; clutch brake disk carriers; coolant tubes; cooler guards; cooler tubes; cutting edges; diesel emission exhaust fluid lines; disk brake hubs; driver casting assemblies; duct plate housings; dura-max cutting edges; end bits; exhaust pipe assemblies; fan adapters; fan guards; fitting yokes; foot control pedals; four wheel drive axles; front axles; fuel tank assemblies; fuel tank brackets; fuel tank enclosure guards; grill frames; grill frame assemblies; handrail supports; handrail tubes; harness fan drive assemblies; heat shield plates; hood weldments; hydraulic tanks; impact breakers; joint E:\FR\FM\20JNN1.SGM 20JNN1

Agencies

[Federal Register Volume 81, Number 118 (Monday, June 20, 2016)]
[Notices]
[Pages 39889-39890]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-14530]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[Order No. 2001]


Approval of Subzone Status; Cabela's Inc.; Tooele, Utah

    Pursuant to its authority under the Foreign-Trade Zones Act of 
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade 
Zones Board (the Board) adopts the following Order:

    Whereas, the Foreign-Trade Zones Act provides for ``. . . the 
establishment . . . of foreign-trade zones in ports of entry of the 
United States, to expedite and encourage foreign commerce, and for 
other purposes,'' and authorizes the Foreign-Trade Zones Board to grant 
to qualified corporations the privilege of establishing foreign-trade 
zones in or adjacent to U.S. Customs and Border Protection ports of 
entry;
    Whereas, the Board's regulations (15 CFR part 400) provide for the 
establishment of subzones for specific uses;
    Whereas, the Salt Lake City Corporation, grantee of Foreign-Trade 
Zone 30, has made application to the Board for the establishment of a 
subzone at the facility of Cabela's Inc., located in Tooele, Utah, (FTZ 
Docket B-03-2016, docketed January 20, 2016);
    Whereas, notice inviting public comment has been given in the 
Federal

[[Page 39890]]

Register (81 FR 4250, January 26, 2016) and the application has been 
processed pursuant to the FTZ Act and the Board's regulations; and,
    Whereas, the Board adopts the findings and recommendations of the 
examiner's memorandum, and finds that the requirements of the FTZ Act 
and the Board's regulations are satisfied;
    Now, therefore, the Board hereby approves subzone status at the 
facility of Cabela's Inc., located in Tooele, Utah (Subzone 30B), as 
described in the application and Federal Register notice, subject to 
the FTZ Act and the Board's regulations, including Section 400.13.

    Signed at Washington, DC, this 2nd day of June 2016.
Paul Piquado,
Assistant Secretary of Commerce for Enforcement and Compliance, 
Alternate Chairman, Foreign-Trade Zones Board.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016-14530 Filed 6-17-16; 8:45 am]
BILLING CODE 3510-DS-P