Dissemination of Patient-Specific Information From Devices by Device Manufacturers; Draft Guidance for Industry and Food and Drug Administration Staff; Availability, 37603-37604 [2016-13787]
Download as PDF
Federal Register / Vol. 81, No. 112 / Friday, June 10, 2016 / Notices
37603
TABLE 1—ESTIMATED ANNUAL REPORTING BURDEN 1
Medicated Feed Mill License Application using
Form FDA 3448 (515.10(b)).
Supplemental Feed Mill License Application using
Form FDA 3448 (515.11(b)).
Voluntary Revocation of Medicated Feed Mill License.
(515.23) ....................................................................
Filing a Request for a Hearing on Medicated Feed
Mill License (515.30(c)).
Total ..................................................................
1 There
Number of
responses per
respondent
Number of
respondents
21 CFR section and activity
Total annual
responses
Average burden per
response
Total hours
20
1
20
0.25 (15 minutes) ......
5
40
1
40
0.25 (15 minutes) ......
10
40
1
40
0.25 (15 minutes) ......
10
1
1
1
4 ................................
4
........................
........................
........................
....................................
29
are no capital costs or operating and maintenance costs associated with this collection of information.
TABLE 2—ESTIMATED ANNUAL RECORDKEEPING BURDEN 1
Number of
recordkeepers
21 CFR section and activity
Maintenance of Records for Approved Labeling for
Each ‘‘Type B’’ and ‘‘Type C’’ Feed (510.305).
1 There
Dated: June 6, 2016.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2016–13790 Filed 6–9–16; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
asabaliauskas on DSK3SPTVN1PROD with NOTICES
[Docket No. FDA–2016–D–1264]
Dissemination of Patient-Specific
Information From Devices by Device
Manufacturers; Draft Guidance for
Industry and Food and Drug
Administration Staff; Availability
Food and Drug Administration,
HHS.
ACTION:
890
Total annual
records
1
890
Average burden per
recordkeeping
0.03 (2 minutes) ........
Total hours
27
are no capital costs or operating and maintenance costs associated with this collection of information.
These estimates are based on our
experience with medicated feed mill
license applications. We estimate that
we will receive 20 medicated feed mill
license applications, 40 supplemental
applications, 40 requests for voluntary
revocation, and that these submissions
will take approximately 15 minutes per
response, as shown in table 1, rows 1
through 3. We estimate that preparing a
request for a hearing under § 515.30(c)
takes approximately 4 hours, as shown
in table 1, row 4. In table 2, we estimate
that 890 licensees will keep the records
required by 21 CFR 510.305 expending
a total of 27 hours annually.
AGENCY:
Number of
records per
recordkeeper
Notice of availability.
VerDate Sep<11>2014
19:02 Jun 09, 2016
Jkt 238001
The Food and Drug
Administration (FDA or Agency) is
announcing the availability of the draft
guidance entitled ‘‘Dissemination of
Patient-Specific Information from
Devices by Device Manufacturers.’’ The
FDA developed this draft guidance to
facilitate the appropriate and
responsible dissemination of patientspecific information recorded, stored,
processed, retrieved, and/or derived
from medical devices from
manufacturers to patients. This draft
guidance provides recommendations to
industry, healthcare providers, and FDA
staff about the mechanisms and
considerations for device manufacturers
sharing such information with patients.
This draft guidance is not final nor is it
in effect at this time.
DATES: Although you can comment on
any guidance at any time (see 21 CFR
10.115(g)(5)), to ensure that the Agency
considers your comment of this draft
guidance before it begins work on the
final version of the guidance, submit
either electronic or written comments
on the draft guidance by August 9, 2016.
ADDRESSES: You may submit comments
as follows:
SUMMARY:
Electronic Submissions
Submit electronic comments in the
following way:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the
instructions for submitting comments.
Comments submitted electronically,
including attachments, to https://
www.regulations.gov will be posted to
PO 00000
Frm 00038
Fmt 4703
Sfmt 4703
the docket unchanged. Because your
comment will be made public, you are
solely responsible for ensuring that your
comment does not include any
confidential information that you or a
third party may not wish to be posted,
such as medical information, your or
anyone else’s Social Security number, or
confidential business information, such
as a manufacturing process. Please note
that if you include your name, contact
information, or other information that
identifies you in the body of your
comments, that information will be
posted on https://www.regulations.gov.
• If you want to submit a comment
with confidential information that you
do not wish to be made available to the
public, submit the comment as a
written/paper submission and in the
manner detailed (see ‘‘Written/Paper
Submissions’’ and ‘‘Instructions’’).
Written/Paper Submissions
Submit written/paper submissions as
follows:
• Mail/Hand delivery/Courier (for
written/paper submissions): Division of
Dockets Management (HFA–305), Food
and Drug Administration, 5630 Fishers
Lane, Rm. 1061, Rockville, MD 20852.
• For written/paper comments
submitted to the Division of Dockets
Management, FDA will post your
comment, as well as any attachments,
except for information submitted,
marked and identified, as confidential,
if submitted as detailed in
‘‘Instructions.’’
E:\FR\FM\10JNN1.SGM
10JNN1
asabaliauskas on DSK3SPTVN1PROD with NOTICES
37604
Federal Register / Vol. 81, No. 112 / Friday, June 10, 2016 / Notices
Instructions: All submissions received
must include the Docket No. FDA–
2016–D–1264 for ‘‘Dissemination of
Patient-Specific Information from
Devices by Device Manufacturers.’’
Received comments will be placed in
the docket and, except for those
submitted as ‘‘Confidential
Submissions,’’ publicly viewable at
https://www.regulations.gov or at the
Division of Dockets Management
between 9 a.m. and 4 p.m., Monday
through Friday.
• Confidential Submissions—To
submit a comment with confidential
information that you do not wish to be
made publicly available, submit your
comments only as a written/paper
submission. You should submit two
copies total. One copy will include the
information you claim to be confidential
with a heading or cover note that states
‘‘THIS DOCUMENT CONTAINS
CONFIDENTIAL INFORMATION.’’ The
Agency will review this copy, including
the claimed confidential information, in
its consideration of comments. The
second copy, which will have the
claimed confidential information
redacted/blacked out, will be available
for public viewing and posted on https://
www.regulations.gov. Submit both
copies to the Division of Dockets
Management. If you do not wish your
name and contact information to be
made publicly available, you can
provide this information on the cover
sheet and not in the body of your
comments and you must identify this
information as ‘‘confidential.’’ Any
information marked as ‘‘confidential’’
will not be disclosed except in
accordance with 21 CFR 10.20 and other
applicable disclosure law. For more
information about FDA’s posting of
comments to public dockets, see 80 FR
56469, September 18, 2015, or access
the information at: https://www.fda.gov/
regulatoryinformation/dockets/
default.htm.
Docket: For access to the docket to
read background documents or the
electronic and written/paper comments
received, go to https://
www.regulations.gov and insert the
docket number, found in brackets in the
heading of this document, into the
‘‘Search’’ box and follow the prompts
and/or go to the Division of Dockets
Management, 5630 Fishers Lane, Rm.
1061, Rockville, MD 20852.
An electronic copy of the guidance
document is available for download
from the Internet. See the
SUPPLEMENTARY INFORMATION section for
information on electronic access to the
guidance. Submit written requests for a
single hard copy of the draft guidance
document entitled ‘‘Dissemination of
VerDate Sep<11>2014
19:02 Jun 09, 2016
Jkt 238001
Patient-Specific Information from
Devices by Device Manufacturers’’ to
the Office of the Center Director,
Guidance and Policy Development,
Center for Devices and Radiological
Health, Food and Drug Administration,
10903 New Hampshire Ave., Bldg. 66,
Rm. 5431, Silver Spring, MD 20993–
0002. Send one self-addressed adhesive
label to assist that office in processing
your request.
FOR FURTHER INFORMATION CONTACT:
Sugato De, Center for Devices and
Radiological Health, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 66, rm. 5435, Silver Spring,
MD 20993–0002, 301–796–6270,
Sugato.De@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
Increasingly, patients seek to play an
active role in their own healthcare. FDA
believes that manufacturers providing
patients with accurate, useable
information about their healthcare
(including the medical products they
use and patient-specific information
these products generate) will improve
healthcare by empowering patients to
participate fully with their healthcare
providers in making sound medical
decisions. For purposes of this
guidance, patient-specific information is
defined as any information unique to an
individual patient or unique to that
patient’s treatment or diagnosis that
may be recorded, stored, processed,
retrieved, and/or derived from a medical
device. This information may include,
but is not limited to, recorded patient
data, device usage/output statistics,
healthcare provider inputs, incidence of
alarms, and/or records of device
malfunctions or failures.
FDA developed this draft guidance to
convey FDA’s policy regarding the
dissemination of patient-specific
information recorded, stored, processed,
retrieved, and/or derived from a medical
device and provided by the
manufacturer to the patient who is
either treated or diagnosed with that
specific device. This draft guidance
document also outlines considerations
for the form in which this information
is communicated to help to ensure
clarity of content and appropriate
context.
Manufacturers may share patientspecific information (recorded, stored,
processed, retrieved, and/or derived
from a medical device, consistent with
the intended use of that medical device)
with patients either on their own
initiative or at the patient’s request,
without obtaining additional premarket
review before doing so. Any labeling, as
PO 00000
Frm 00039
Fmt 4703
Sfmt 9990
that term is defined in section 201(m) of
the Federal Food, Drug, and Cosmetic
Act (the FD&C Act), that is provided to
the patient by the manufacturer is
subject to applicable requirements in
the FD&C Act and FDA regulations.
II. Significance of Guidance
This draft guidance is being issued
consistent with FDA’s good guidance
practices regulation (21 CFR 10.115).
The draft guidance when finalized will
represent the current thinking of FDA
on ‘‘Dissemination of Patient-Specific
Information from Devices by Device
Manufacturers.’’ It does not establish
any rights for any person and is not
binding on FDA or the public. You can
use an alternative approach if it satisfies
the requirements of the applicable
statutes and regulations.
III. Electronic Access
Persons interested in obtaining a copy
of the draft guidance may do so by
downloading an electronic copy from
the Internet. A search capability for all
Center for Devices and Radiological
Health guidance documents is available
at https://www.fda.gov/MedicalDevices/
DeviceRegulationandGuidance/
GuidanceDocuments/default.htm.
Guidance documents are also available
at https://www.regulations.gov. Persons
unable to download an electronic copy
of ‘‘Dissemination of Patient-Specific
Information from Devices by Device
Manufacturers’’ may send an email
request to CDRH-Guidance@fda.hhs.gov
to receive an electronic copy of the
document. Please use the document
number 1500067 to identify the
guidance you are requesting.
IV. Paperwork Reduction Act of 1995
This guidance refers to previously
approved collections of information
found in FDA regulations and guidance.
These collections of information are
subject to review by the Office of
Management and Budget (OMB) under
the Paperwork Reduction Act of 1995
(44 U.S.C. 3501–3520). The collections
of information in 21 CFR parts 801 and
809, regarding device labeling, are
approved under OMB control number
0910–0485.
Dated: June 6, 2016.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2016–13787 Filed 6–9–16; 8:45 am]
BILLING CODE 4164–01–P
E:\FR\FM\10JNN1.SGM
10JNN1
Agencies
[Federal Register Volume 81, Number 112 (Friday, June 10, 2016)]
[Notices]
[Pages 37603-37604]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-13787]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2016-D-1264]
Dissemination of Patient-Specific Information From Devices by
Device Manufacturers; Draft Guidance for Industry and Food and Drug
Administration Staff; Availability
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice of availability.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA or Agency) is announcing
the availability of the draft guidance entitled ``Dissemination of
Patient-Specific Information from Devices by Device Manufacturers.''
The FDA developed this draft guidance to facilitate the appropriate and
responsible dissemination of patient-specific information recorded,
stored, processed, retrieved, and/or derived from medical devices from
manufacturers to patients. This draft guidance provides recommendations
to industry, healthcare providers, and FDA staff about the mechanisms
and considerations for device manufacturers sharing such information
with patients. This draft guidance is not final nor is it in effect at
this time.
DATES: Although you can comment on any guidance at any time (see 21 CFR
10.115(g)(5)), to ensure that the Agency considers your comment of this
draft guidance before it begins work on the final version of the
guidance, submit either electronic or written comments on the draft
guidance by August 9, 2016.
ADDRESSES: You may submit comments as follows:
Electronic Submissions
Submit electronic comments in the following way:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the instructions for submitting comments. Comments submitted
electronically, including attachments, to https://www.regulations.gov
will be posted to the docket unchanged. Because your comment will be
made public, you are solely responsible for ensuring that your comment
does not include any confidential information that you or a third party
may not wish to be posted, such as medical information, your or anyone
else's Social Security number, or confidential business information,
such as a manufacturing process. Please note that if you include your
name, contact information, or other information that identifies you in
the body of your comments, that information will be posted on https://www.regulations.gov.
If you want to submit a comment with confidential
information that you do not wish to be made available to the public,
submit the comment as a written/paper submission and in the manner
detailed (see ``Written/Paper Submissions'' and ``Instructions'').
Written/Paper Submissions
Submit written/paper submissions as follows:
Mail/Hand delivery/Courier (for written/paper
submissions): Division of Dockets Management (HFA-305), Food and Drug
Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.
For written/paper comments submitted to the Division of
Dockets Management, FDA will post your comment, as well as any
attachments, except for information submitted, marked and identified,
as confidential, if submitted as detailed in ``Instructions.''
[[Page 37604]]
Instructions: All submissions received must include the Docket No.
FDA-2016-D-1264 for ``Dissemination of Patient-Specific Information
from Devices by Device Manufacturers.'' Received comments will be
placed in the docket and, except for those submitted as ``Confidential
Submissions,'' publicly viewable at https://www.regulations.gov or at
the Division of Dockets Management between 9 a.m. and 4 p.m., Monday
through Friday.
Confidential Submissions--To submit a comment with
confidential information that you do not wish to be made publicly
available, submit your comments only as a written/paper submission. You
should submit two copies total. One copy will include the information
you claim to be confidential with a heading or cover note that states
``THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION.'' The Agency will
review this copy, including the claimed confidential information, in
its consideration of comments. The second copy, which will have the
claimed confidential information redacted/blacked out, will be
available for public viewing and posted on https://www.regulations.gov.
Submit both copies to the Division of Dockets Management. If you do not
wish your name and contact information to be made publicly available,
you can provide this information on the cover sheet and not in the body
of your comments and you must identify this information as
``confidential.'' Any information marked as ``confidential'' will not
be disclosed except in accordance with 21 CFR 10.20 and other
applicable disclosure law. For more information about FDA's posting of
comments to public dockets, see 80 FR 56469, September 18, 2015, or
access the information at: https://www.fda.gov/regulatoryinformation/dockets/default.htm.
Docket: For access to the docket to read background documents or
the electronic and written/paper comments received, go to https://www.regulations.gov and insert the docket number, found in brackets in
the heading of this document, into the ``Search'' box and follow the
prompts and/or go to the Division of Dockets Management, 5630 Fishers
Lane, Rm. 1061, Rockville, MD 20852.
An electronic copy of the guidance document is available for
download from the Internet. See the SUPPLEMENTARY INFORMATION section
for information on electronic access to the guidance. Submit written
requests for a single hard copy of the draft guidance document entitled
``Dissemination of Patient-Specific Information from Devices by Device
Manufacturers'' to the Office of the Center Director, Guidance and
Policy Development, Center for Devices and Radiological Health, Food
and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 5431,
Silver Spring, MD 20993-0002. Send one self-addressed adhesive label to
assist that office in processing your request.
FOR FURTHER INFORMATION CONTACT: Sugato De, Center for Devices and
Radiological Health, Food and Drug Administration, 10903 New Hampshire
Ave., Bldg. 66, rm. 5435, Silver Spring, MD 20993-0002, 301-796-6270,
Sugato.De@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
Increasingly, patients seek to play an active role in their own
healthcare. FDA believes that manufacturers providing patients with
accurate, useable information about their healthcare (including the
medical products they use and patient-specific information these
products generate) will improve healthcare by empowering patients to
participate fully with their healthcare providers in making sound
medical decisions. For purposes of this guidance, patient-specific
information is defined as any information unique to an individual
patient or unique to that patient's treatment or diagnosis that may be
recorded, stored, processed, retrieved, and/or derived from a medical
device. This information may include, but is not limited to, recorded
patient data, device usage/output statistics, healthcare provider
inputs, incidence of alarms, and/or records of device malfunctions or
failures.
FDA developed this draft guidance to convey FDA's policy regarding
the dissemination of patient-specific information recorded, stored,
processed, retrieved, and/or derived from a medical device and provided
by the manufacturer to the patient who is either treated or diagnosed
with that specific device. This draft guidance document also outlines
considerations for the form in which this information is communicated
to help to ensure clarity of content and appropriate context.
Manufacturers may share patient-specific information (recorded,
stored, processed, retrieved, and/or derived from a medical device,
consistent with the intended use of that medical device) with patients
either on their own initiative or at the patient's request, without
obtaining additional premarket review before doing so. Any labeling, as
that term is defined in section 201(m) of the Federal Food, Drug, and
Cosmetic Act (the FD&C Act), that is provided to the patient by the
manufacturer is subject to applicable requirements in the FD&C Act and
FDA regulations.
II. Significance of Guidance
This draft guidance is being issued consistent with FDA's good
guidance practices regulation (21 CFR 10.115). The draft guidance when
finalized will represent the current thinking of FDA on ``Dissemination
of Patient-Specific Information from Devices by Device Manufacturers.''
It does not establish any rights for any person and is not binding on
FDA or the public. You can use an alternative approach if it satisfies
the requirements of the applicable statutes and regulations.
III. Electronic Access
Persons interested in obtaining a copy of the draft guidance may do
so by downloading an electronic copy from the Internet. A search
capability for all Center for Devices and Radiological Health guidance
documents is available at https://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/default.htm. Guidance
documents are also available at https://www.regulations.gov. Persons
unable to download an electronic copy of ``Dissemination of Patient-
Specific Information from Devices by Device Manufacturers'' may send an
email request to CDRH-Guidance@fda.hhs.gov to receive an electronic
copy of the document. Please use the document number 1500067 to
identify the guidance you are requesting.
IV. Paperwork Reduction Act of 1995
This guidance refers to previously approved collections of
information found in FDA regulations and guidance. These collections of
information are subject to review by the Office of Management and
Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501-
3520). The collections of information in 21 CFR parts 801 and 809,
regarding device labeling, are approved under OMB control number 0910-
0485.
Dated: June 6, 2016.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2016-13787 Filed 6-9-16; 8:45 am]
BILLING CODE 4164-01-P