Proposed Collection of Information: FS Form 2001-Release, 26870 [2016-10358]
Download as PDF
<![CDATA[
asabaliauskas on DSK3SPTVN1PROD with NOTICES
26870
Federal Register / Vol. 81, No. 86 / Wednesday, May 4, 2016 / Notices
Seat Belt Assembly Anchorages, 212
Windshield Mounting, 214 Side Impact
Protection, 216 Roof Crush Resistance,
219 Windshield Zone Intrusion, and 302
Flammability of Interior Materials.
The petitioner also contends that the
subject non-U.S certified vehicles are
capable of being readily altered to meet
the following standards, in the manner
indicated:
Standard No. 101 Controls and
Displays: Replacement of the original
instrument cluster with the U.S. model
component and reprogramming the
associated software as described in the
petition. Inspection of each vehicle, and
replacement of the cruise control lever
with the U.S.-model component if
required for the vehicle to conform to
the standard.
Standard No. 108 Lamps, Reflective
Devices and Associated Equipment:
Replacement of the front and rear turn
signal and side marker lamps,
headlamps, taillamps, stop lamps, and
backup lamps with U.S.-conforming
components.
Standard No. 110 Tire Selection and
Rims: Installation of the required tire
information placard.
Standard No. 111 Rearview Mirrors:
Replacement of the passenger side
rearview mirror with a U.S.-model
component or inscription of the
required warning statement on the face
of the existing mirror.
No. 114 Theft Protection and
Rollaway Prevention: Reprograming to
activate the audible key warning and
belt warning as described in the
petition.
Standard No. 208 Occupant Crash
Protection: The petitioner states that the
passive restraint systems of the
international specification vehicles
comply with the requirements of this
standard and are identical to the U.S.
version with respect to all aspects of
this standard, except for the passenger
sun visor and dash mounted air bag
warning labels. The petitioner also
states that all software used to control
the occupant crash protection systems
bears the U.S. program codes and all
hardware parts bear the U.S. part
numbers.
Standard No. 225 Child Restraint
Anchorage Systems: Installation of U.S.
model anchorages and labels.
Standard No. 301 Fuel System
Integrity: The petitioner states that the
fuel systems in these vehicles are
identical to those in the U.S.-certified
model. Fuel spillage problems are
controlled by the evaporative system
that was installed to meet EPA
VerDate Sep<11>2014
18:44 May 03, 2016
Jkt 238001
requirements. These evaporative
systems have a rollover and check valve
incorporated into their design.
The petitioner also states that a
vehicle identification plate must be
affixed to the vehicle near the left
windshield pillar to meet the
requirements of 49 CFR part 565.
All comments received before the
close of business on the closing date
indicated above will be considered, and
will be available for examination in the
docket at the above addresses both
before and after that date. To the extent
possible, comments filed after the
closing date will also be considered.
Notice of final action on the petition
will be published in the Federal
Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141(a)(1)(A),
(a)(1)(B), and (b)(1); 49 CFR 593.7; delegation
of authority at 49 CFR 1.95 and 501.8.
Jeffrey M. Giuseppe,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 2016–10349 Filed 5–3–16; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF THE TREASURY
Bureau of the Fiscal Service
Proposed Collection of Information: FS
Form 2001—Release
Notice and request for
comments.
ACTION:
The Department of the
Treasury, as part of its continuing effort
to reduce paperwork and respondent
burden, invites the general public and
other Federal agencies to take this
opportunity to comment on a proposed
and/or continuing information
collection, as required by the Paperwork
Reduction Act of 1995, Public Law 104–
13 (44 U.S.C. 3506(c)(2)(A). Currently
the Bureau of the Fiscal Service within
the Department of the Treasury is
soliciting comments concerning the
Release.
SUMMARY:
Written comments should be
received on or before July 5, 2016 to be
assured of consideration.
ADDRESSES: Direct all written comments
and requests for further information to
Bureau of the Fiscal Service, Bruce A.
Sharp, 200 Third Street A4–A,
Parkersburg, WV 26106–1328, or
bruce.sharp@fiscal.treasury.gov.
DATES:
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the form(s) and instructions
PO 00000
Frm 00098
Fmt 4703
Sfmt 9990
should be directed to Ron Lewis; 200
Third Street Room 515, Parkersburg,
WV 26106–1328, or
ron.lewis@fiscal.treasury.gov.
SUPPLEMENTARY INFORMATION:
Form Number and Titles: FS Form
2001—Release.
OMB Number: 1530–0053. (Previously
approved as 1535–0114 as a collection
conducted by Department of the
Treasury/Bureau of the Public Debt.)
Transfer of OMB Control Number: The
Bureau of Public Debt (BPD) and the
Financial Management Service (FMS)
have consolidated to become the Bureau
of the Fiscal Service (Fiscal Service).
Information collection requests
previously held separately by BPD and
FMS will now be identified by a 1530
prefix, designating Fiscal Service.
Abstract: The information is
requested to ratify payment of savings
bonds/notes and release the United
States of America from any liability.
Current Actions: Revision of a
currently approved collection.
Type of Review: Regular.
Affected Public: Individuals or
Households.
Estimated Number of Respondents:
25.
Estimated Time per Respondent: 6
minutes.
Estimated Total Annual Burden
Hours: 2.5.
Request for Comments: Comments
submitted in response to this notice will
be summarized and/or included in the
request for OMB approval. All
comments will become a matter of
public record. Comments are invited on:
(a) Whether the collection of
information is necessary for the proper
performance of the functions of the
agency, including whether the
information shall have practical utility;
(b) the accuracy of the agency’s estimate
of the burden of the collection of
information; (c) ways to enhance the
quality, utility, and clarity of the
information to be collected; (d) ways to
minimize the burden of the collection of
information on respondents, including
through the use of automated collection
techniques or other forms of information
technology; and (e) estimates of capital
or start-up costs and costs of operation,
maintenance, and purchase of services
to provide information.
Dated: April 28, 2016.
Bruce A. Sharp,
Bureau Clearance Officer.
[FR Doc. 2016–10358 Filed 5–3–16; 8:45 am]
BILLING CODE 4810–AS–P
E:\FR\FM\04MYN1.SGM
04MYN1
]]>Agencies
- DEPARTMENT OF THE TREASURY
- Bureau of the Fiscal Service
[Federal Register Volume 81, Number 86 (Wednesday, May 4, 2016)]
[Notices]
[Page 26870]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-10358]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF THE TREASURY
Bureau of the Fiscal Service
Proposed Collection of Information: FS Form 2001--Release
ACTION: Notice and request for comments.
-----------------------------------------------------------------------
SUMMARY: The Department of the Treasury, as part of its continuing
effort to reduce paperwork and respondent burden, invites the general
public and other Federal agencies to take this opportunity to comment
on a proposed and/or continuing information collection, as required by
the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C.
3506(c)(2)(A). Currently the Bureau of the Fiscal Service within the
Department of the Treasury is soliciting comments concerning the
Release.
DATES: Written comments should be received on or before July 5, 2016 to
be assured of consideration.
ADDRESSES: Direct all written comments and requests for further
information to Bureau of the Fiscal Service, Bruce A. Sharp, 200 Third
Street A4-A, Parkersburg, WV 26106-1328, or
bruce.sharp@fiscal.treasury.gov.
FOR FURTHER INFORMATION CONTACT: Requests for additional information or
copies of the form(s) and instructions should be directed to Ron Lewis;
200 Third Street Room 515, Parkersburg, WV 26106-1328, or
ron.lewis@fiscal.treasury.gov.
SUPPLEMENTARY INFORMATION:
Form Number and Titles: FS Form 2001--Release.
OMB Number: 1530-0053. (Previously approved as 1535-0114 as a
collection conducted by Department of the Treasury/Bureau of the Public
Debt.) Transfer of OMB Control Number: The Bureau of Public Debt (BPD)
and the Financial Management Service (FMS) have consolidated to become
the Bureau of the Fiscal Service (Fiscal Service). Information
collection requests previously held separately by BPD and FMS will now
be identified by a 1530 prefix, designating Fiscal Service.
Abstract: The information is requested to ratify payment of savings
bonds/notes and release the United States of America from any
liability.
Current Actions: Revision of a currently approved collection.
Type of Review: Regular.
Affected Public: Individuals or Households.
Estimated Number of Respondents: 25.
Estimated Time per Respondent: 6 minutes.
Estimated Total Annual Burden Hours: 2.5.
Request for Comments: Comments submitted in response to this notice
will be summarized and/or included in the request for OMB approval. All
comments will become a matter of public record. Comments are invited
on: (a) Whether the collection of information is necessary for the
proper performance of the functions of the agency, including whether
the information shall have practical utility; (b) the accuracy of the
agency's estimate of the burden of the collection of information; (c)
ways to enhance the quality, utility, and clarity of the information to
be collected; (d) ways to minimize the burden of the collection of
information on respondents, including through the use of automated
collection techniques or other forms of information technology; and (e)
estimates of capital or start-up costs and costs of operation,
maintenance, and purchase of services to provide information.
Dated: April 28, 2016.
Bruce A. Sharp,
Bureau Clearance Officer.
[FR Doc. 2016-10358 Filed 5-3-16; 8:45 am]
BILLING CODE 4810-AS-P
