Foreign-Trade Zone (FTZ) 141-Monroe County, New York; Notification of Proposed Production Activity; Xerox Corporation; Subzone 141B (Bulk Toner, Toner Cartridges and Photoreceptors); Webster, New York, 14834 [2016-06173]

Download as PDF 14834 Federal Register / Vol. 81, No. 53 / Friday, March 18, 2016 / Notices as described in the application and Federal Register notice, subject to the FTZ Act and the Board’s regulations, including Section 400.13. Signed at Washington, DC, this 22nd day of February 2016. Paul Piquado, Assistant Secretary of Commerce for Enforcement and Compliance, Alternate Chairman, Foreign-Trade Zones Board. [FR Doc. 2016–06175 Filed 3–17–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–12–2016] Foreign-Trade Zone (FTZ) 168—Dallas/ Fort Worth, Texas; Notification of Proposed Production Activity; Gulfstream Aerospace Corporation (Passenger Jet Aircraft); Dallas, Texas Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is April 27, 2016. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Pierre Duy at Pierre.Duy@trade.gov or (202) 482–1378. Dated: March 9, 2016. Andrew McGilvray, Executive Secretary. [FR Doc. 2016–06174 Filed 3–17–16; 8:45 am] asabaliauskas on DSK3SPTVN1PROD with NOTICES BILLING CODE 3510–DS–P The Metroplex International Trade Development Corporation, grantee of FTZ 168, submitted a notification of proposed production activity to the FTZ Board on behalf of Gulfstream Aerospace Corporation (Gulfstream), located in Dallas, Texas. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on March 8, 2016. The Gulfstream facility is located within Site 10 of FTZ 168. The facility is used for the production of passenger jet aircraft. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Gulfstream from customs duty payments on the foreign status components used in export production. On its domestic sales, Gulfstream would be able to choose the duty rate during customs entry procedures that applies to passenger jet aircraft (free) for the foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Flight data recorders; wire harnesses; aircraft parts; fuselage panels; fuselage panel covers; aircraft assemblies; upholstery leather; upholstery suede; sheepskin seat covers; metal placards; power supplies; regulators; magnets; landing lights; headsets/headphones; and, antennas (duty rate ranges free to 4.9%). VerDate Sep<11>2014 19:50 Mar 17, 2016 Jkt 238001 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–13–2016] Foreign-Trade Zone (FTZ) 141— Monroe County, New York; Notification of Proposed Production Activity; Xerox Corporation; Subzone 141B (Bulk Toner, Toner Cartridges and Photoreceptors); Webster, New York The County of Monroe, New York, grantee of FTZ 141, submitted a notification of proposed production activity to the FTZ Board on behalf of Xerox Corporation (Xerox) located within Subzone 141B in Webster, New York. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on March 7, 2016. The Xerox facility is used for the production of bulk toner, toner cartridges and photoreceptors. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Xerox from customs duty payments on the foreign-status materials/components used in export production. On its domestic sales, Xerox would be able to choose the duty rates during customs entry procedures that apply to bulk toner, toner cartridges and photoreceptors (duty rates range from free to 6.5%) for the foreign-status PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 inputs noted below. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Strontium titanate; zinc stearate; titanium dioxide; silicon dioxide; polytetrafluoroethylene (PTFE); polymethylmethacrylate; bulk toner; polycarbonate resin; and tri-aryl amine (duty rates range from 3.7% to 6.5%). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is April 27, 2016. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: March 10, 2016. Andrew McGilvray, Executive Secretary. [FR Doc. 2016–06173 Filed 3–17–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–76–2015] Authorization of Production Activity; Foreign-Trade Subzone 238B; CEIRoanoke, LLC (Cosmetics and Personal Care Products Bottling); Roanoke, Virginia On November 6, 2015, the New River Valley Economic Development Alliance, grantee of FTZ 238, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of CEI-Roanoke, LLC, operator of Subzone 238B in Roanoke, Virginia. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (80 FR 71771–71772, November 17, 2015). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. E:\FR\FM\18MRN1.SGM 18MRN1

Agencies

[Federal Register Volume 81, Number 53 (Friday, March 18, 2016)]
[Notices]
[Page 14834]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-06173]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-13-2016]


Foreign-Trade Zone (FTZ) 141--Monroe County, New York; 
Notification of Proposed Production Activity; Xerox Corporation; 
Subzone 141B (Bulk Toner, Toner Cartridges and Photoreceptors); 
Webster, New York

    The County of Monroe, New York, grantee of FTZ 141, submitted a 
notification of proposed production activity to the FTZ Board on behalf 
of Xerox Corporation (Xerox) located within Subzone 141B in Webster, 
New York. The notification conforming to the requirements of the 
regulations of the FTZ Board (15 CFR 400.22) was received on March 7, 
2016.
    The Xerox facility is used for the production of bulk toner, toner 
cartridges and photoreceptors. Pursuant to 15 CFR 400.14(b), FTZ 
activity would be limited to the specific foreign-status materials and 
components and specific finished products described in the submitted 
notification (as described below) and subsequently authorized by the 
FTZ Board.
    Production under FTZ procedures could exempt Xerox from customs 
duty payments on the foreign-status materials/components used in export 
production. On its domestic sales, Xerox would be able to choose the 
duty rates during customs entry procedures that apply to bulk toner, 
toner cartridges and photoreceptors (duty rates range from free to 
6.5%) for the foreign-status inputs noted below. Customs duties also 
could possibly be deferred or reduced on foreign-status production 
equipment.
    The components and materials sourced from abroad include: Strontium 
titanate; zinc stearate; titanium dioxide; silicon dioxide; 
polytetrafluoroethylene (PTFE); polymethylmethacrylate; bulk toner; 
polycarbonate resin; and tri-aryl amine (duty rates range from 3.7% to 
6.5%).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is April 27, 2016.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
    For further information, contact Diane Finver at 
Diane.Finver@trade.gov or (202) 482-1367.

    Dated: March 10, 2016.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016-06173 Filed 3-17-16; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.