Agency Information Collection Activities; Proposed Collection; Comment Request; Requirements Pertaining to Third Party Conformity Assessment Bodies, 7511-7512 [2016-02939]

Download as PDF Federal Register / Vol. 81, No. 29 / Friday, February 12, 2016 / Notices asabaliauskas on DSK9F6TC42PROD with NOTICES2 agencies employing persons who are blind or have other severe disabilities. The following products are proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products NSN(s)—Product Name(s): MR 874—Potato Masher; MR 867—Cup, Measuring, Angled Mandatory Source(s) of Supply: Cincinnati Association for the Blind, Cincinnati, OH Mandatory Purchase For: Military commissaries and exchanges in accordance with the Code of Federal Regulations, Chapter 51, 51–6.4. Contracting Activity: Defense Commissary Agency Distribution: C-List NSN(s)—Product Name(s): 4330–01–398– 8484—Filter Element, Fluid Mandatory Source(s) of Supply: Crossroads Rehabilitation Center, Inc., Indianapolis, IN Mandatory Purchase For: 100% of the requirement of the Department of Defense Contracting Activity: Defense Logistics Agency Land and Maritime Distribution: C-List NSN(s)—Product Name(s): 6650–00–NIB–0009—Complete Eyeglass CR–39 Single Vision, plastic, clr 6650–00–NIB–0010—Complete Eyeglass CR–39 Flat Top 28 Bifocal, clr 6650–00–NIB–0011—Complete Eyeglass CR–39 Flat Top 35 Bifocal, clr 6650–00–NIB–0012—Complete Eyeglass CR–39 Round 25 & 28, clr 6650–00–NIB–0013—Complete Eyeglass CR–39 Flat Top 7 x 28, clr 6650–00–NIB–0014—Complete Eyeglass CR–39 Flat Top 8 x 35, clr 6650–00–NIB–0015—Complete Eyeglass CR–39 Progressives, clr 6650–00–NIB–0016—Complete Eyeglass CR–39 SV Aspheric Lentic. 6650–00–NIB–0017—Complete Eyeglass CR–39 Flat Top-Round Asph Len 6650–00–NIB–0018—Complete Eyeglass CR–39 Exec. Bifocal, clr 6650–00–NIB–0019—Complete Eyeglass Glass Single Vision, clr 6650–00–NIB–0020—Complete Eyeglass Glass Flat Top 28 Bifocal, clr 6650–00–NIB–0021—Complete Eyeglass Glass Flat Top 35 Bifocal, clr 6650–00–NIB–0022—Complete Eyeglass Glass Flat Top 7 x 28, trifoc, clr 6650–00–NIB–0023—Complete Eyeglass Glass Flat Top 8 x 35, trifoc, clr 6650–00–NIB–0024—Complete Eyeglass Glass Progressives, clr 6650–00–NIB–0025—Complete Eyeglass Glass Executive Bifocal, clr 6650–00–NIB–0026—Complete Eyeglass Polycarb SV = Single Vision, clr 6650–00–NIB–0027—Complete Eyeglass Polycarb Flat Top 28, clr 6650–00–NIB–0028—Complete Eyeglass Polycarb Flat Top 35, clr 6650–00–NIB–0029—Complete Eyeglass Polycarb Flat Top 7 x 28, clr 6650–00–NIB–0030—Complete Eyeglass Polycarb Flat Top 8 x 35, clr VerDate Sep<11>2014 17:38 Feb 11, 2016 Jkt 238001 6650–00–NIB–0031—Complete Eyeglass Polycarb Progressives, clr 6650–00–NIB–0032—Lenses Only, 1 pair CR–39 Single Vision, plastic, clr 6650–00–NIB–0033—Lenses Only, 1 pair CR–39 Flat Top 28 Bifocal, clr 6650–00–NIB–0034—Lenses Only, 1 pair CR–39 Flat Top 35 Bifocal, clr 6650–00–NIB–0035—Lenses Only, 1 pair CR–39 Round 25 & 28, clr 6650–00–NIB–0036—Lenses Only, 1 pair CR–39 Flat Top 7 x 28, clr 6650–00–NIB–0037—Lenses Only, 1 pair CR–39 Flat Top 8 x 35, clr 6650–00–NIB–0038—Lenses Only, 1 pair CR–39 Progressives, clr 6650–00–NIB–0039—Lenses Only, 1 pair CR–39 SV Aspheric Lentic. 6650–00–NIB–0040—Lenses Only, 1 pair CR–39 Flat Top/Round Asph Len 6650–00–NIB–0041—Lenses Only, 1 pair CR–39 Exec. Bifocal, clr 6650–00–NIB–0042—Lenses Only, 1 pair Glass Single Vision, clr 6650–00–NIB–0043—Lenses Only, 1 pair Glass Flat Top 28 Bifocal, clr 6650–00–NIB–0044—Lenses Only, 1 pair Glass Flat Top 35 Bifocal, clr 6650–00–NIB–0045—Lenses Only, 1 pair Glass Flat Top 7 x 28, trifoc, clr 6650–00–NIB–0046—Lenses Only, 1 pair Glass Flat Top 8 x 35, trifoc, clr 6650–00–NIB–0047—Lenses Only, 1 pair Glass Progressives, clr 6650–00–NIB–0048—Lenses Only, 1 pair Glass Executive Bifocal, clr 6650–00–NIB–0049—Lenses Only, 1 pair Polycarb SV = Single Vision, clr 6650–00–NIB–0050—Lenses Only, 1 pair Polycarb Flat Top 28, clr 6650–00–NIB–0051—Lenses Only, 1 pair Polycarb Flat Top 35 clr 6650–00–NIB–0052—Lenses Only, 1 pair Polycarb Flat Top 7 x 28, clr 6650–00–NIB–0053—Lenses Only, 1 pair Polycarb Flat Top 8 x 35, clr 6650–00–NIB–0054—Lenses Only, 1 pair Polycarb Progressives, clr 6650–00–NIB–0055—Photochr/Transition, CR–39 SV or MF (MF = Multi-focal) 6650–00–NIB–0056—Photochr-transition Polycarb SV or MF 6650–00–NIB–0057—Photogrey Glass SV or MF 6650–00–NIB–0058—Hi Index Transitions CR–39 SV or MF 6650–00–NIB–0059—Anti-refl. Coating CR–39—PC SV or MF 6650–00–NIB–0060—UV coating CR39 6650–00–NIB–0061—Polariz. Lens CR–39 SV or MF 6650–00–NIB–0062—Slab-off CR–39 SV or MF 6650–00–NIB–0063—Hi Index High Index SV or MF 6650–00–NIB–0064—Prism CR–39 or PC 6650–00–NIB–0065—Diopter CR–39 + or ¥ 9.0 6650–00–NIB–0066—Roll/polish edge CR– 39, PC SV or MF 6650–00–NIB–0067—Hyper3 drop SV, MF CR–39 SV or MF 6650–00–NIB–0068—Add Powers over 4.0 CR–39 MF Only 6650–00–NIB–0069—Frame Only Plastic or Metal PO 00000 Frm 00015 Fmt 4703 Sfmt 4703 7511 Mandatory Source(s) of Supply: WinstonSalem Industries for the Blind, Inc., Winston-Salem, NC Mandatory Purchase For: Department of Veterans Affairs, Veterans Integrated Service Network (VISN) 6 Medical Centers; Community Based Outpatient Clinics (CBOCs); and Health Care Centers that provide optical services Contracting Activity: Department of Veterans Affairs, Veterans Integrated Service Network (VISN) 6 Distribution: C-List Deletion The following product is proposed for deletion from the Procurement List: Product NSN(s)—Product Name(s): 7520–00–224– 7238—Desk Blotter Pad, 191⁄4″ x 241⁄4″, Buff Mandatory Source(s) of Supply: Life’sWork of Western PA Contracting Activity: General Services Administration Barry S. Lineback, Director, Business Operations. [FR Doc. 2016–02943 Filed 2–11–16; 8:45 am] BILLING CODE 6353–01–P CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC–2012–0026] Agency Information Collection Activities; Proposed Collection; Comment Request; Requirements Pertaining to Third Party Conformity Assessment Bodies Consumer Product Safety Commission. ACTION: Notice. AGENCY: As required by the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (‘‘CPSC’’ or ‘‘Commission’’) requests comments on a proposed extension of approval of a collection of information under the requirements pertaining to third party conformity assessment bodies, approved previously under OMB Control No. 3041–0156. The Commission will consider all comments received in response to this notice before requesting an extension of this collection of information from the Office of Management and Budget (‘‘OMB’’). DATES: Submit written or electronic comments on the collection of information by April 12, 2016. ADDRESSES: You may submit comments, identified by Docket No. CPSC–2012– 0026, by any of the following methods: Electronic Submissions: Submit electronic comments to the Federal SUMMARY: E:\FR\FM\12FEN1.SGM 12FEN1 7512 Federal Register / Vol. 81, No. 29 / Friday, February 12, 2016 / Notices eRulemaking Portal at: https:// www.regulations.gov. Follow the instructions for submitting comments. The Commission does not accept comments submitted by electronic mail (email), except through www.regulations.gov. The Commission encourages you to submit electronic comments by using the Federal eRulemaking Portal, as described above. Written Submissions: Submit written submissions by mail/hand delivery/ courier to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814; telephone (301) 504–7923. Instructions: All submissions received must include the agency name and docket number for this notice. All comments received may be posted without change, including any personal identifiers, contact information, or other personal information provided, to: https://www.regulations.gov. Do not submit confidential business information, trade secret information, or other sensitive or protected information that you do not want to be available to the public. If furnished at all, such information should be submitted in writing. Docket: For access to the docket to read background documents or comments received, go to: https:// www.regulations.gov, and insert the docket number CPSC–2012–0026, into the ‘‘Search’’ box, and follow the prompts. FOR FURTHER INFORMATION CONTACT: Robert H. Squibb, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; (301) 504–7815, or by email to: rsquibb@ cpsc.gov. CPSC seeks to renew the following currently approved collection of information: Title: Requirements Pertaining to Third Party Conformity Assessment Bodies. OMB Number: 3041–0156. Type of Review: Renewal of collection. Frequency of Response: On occasion. Affected Public: Third party conformity assessment bodies seeking acceptance of accreditation or continuing accreditation. Estimated Burden: • New Applications from Third Party Conformity Assessment Bodies. Æ We estimate approximately 40 new applications from independent third party conformity assessment bodies will be submitted per year, taking an estimated 75 minutes to complete the asabaliauskas on DSK9F6TC42PROD with NOTICES2 SUPPLEMENTARY INFORMATION: VerDate Sep<11>2014 17:38 Feb 11, 2016 Jkt 238001 initial application materials, with an estimated burden of 50 hours per year. Æ We estimate approximately 3 firewalled third party conformity assessment bodies will apply per year, taking an estimated 8.4 hours to complete the initial application materials, with an estimated burden of 25.2 hours per year. Æ We estimate approximately 4 governmental third party conformity assessment bodies will apply per year, taking an estimated 3 hours to complete the initial application materials, with an estimated burden of 12 hours per year. • Third party conformity assessment bodies updating information. Æ We estimate that approximately 5 third party conformity assessment bodies will take 15 minutes to update information for only those elements of information that need updating, with an estimated burden of 1.35 hours per year. • Third party conformity assessment bodies that subcontracts out tests. Æ We estimate that approximately 27 third party conformity assessment bodies will take 7 minutes to comply with the subcontracting recordkeeping requirement for an estimated 68,769 subcontract test, with an estimated of approximately 8,023 hours per year. • Third party conformity assessment bodies that voluntarily withdraw. Æ We estimate approximately 8 third party conformity assessment bodies will withdraw yearly, taking an estimated 30 minutes to create and submit the required documentation, with an estimated burden of 4 hours per year. • Third party conformity assessment bodies that are audited. Æ We estimate that approximately 228 independent third party conformity assessment bodies each year will be audited, taking approximately 4 minutes to resubmit their Form 223 and accreditation certificate, with an estimated burden of 15.2 hours per year. Æ We estimate that approximately 18 firewalled third party conformity assessment bodies will spend 226 minutes collecting and preparing the documentation to submit for an audit, with estimated burden of about 68 hours per year. Æ We estimate approximately 25 governmental third party conformity assessment bodies will spend 1 hour collecting and preparing the documentation to submit for an audit, with estimated burden of 25 hours per year. • Total Annual Burden. Adding all of the annual estimated burden hours results in a total of 8,224 hours for third party conformity assessment bodies per year. At $38.78 per hour, the total cost of the PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 recordkeeping associated with the Requirements Pertaining to Third Party Conformity Assessment Bodies is approximately $318,927 (8,224 hours × $38.78 = $318,927). General Description of Collection: On March 12, 2013, the Commission issued a rule Pertaining to Third Party Conformity Assessment Bodies (78 FR 15836). The rule established the general requirements concerning third party conformity assessment bodies, such as the requirements and procedures for CPSC acceptance of the accreditation of a third party conformity assessment body, and prescribed adverse actions that may be imposed against CPSCaccepted third party conformity assessment bodies. The rule also amended the audit requirements for third party conformity assessment bodies and amends the Commission’s regulation on inspections. Request for Comments The Commission solicits written comments from all interested persons about the proposed collection of information. The Commission specifically solicits information relevant to the following topics: —Whether the collection of information described above is necessary for the proper performance of the Commission’s functions, including whether the information would have practical utility; —Whether the estimated burden of the proposed collection of information is accurate; —Whether the quality, utility, and clarity of the information to be collected could be enhanced; and —Whether the burden imposed by the collection of information could be minimized by use of automated, electronic or other technological collection techniques, or other forms of information technology. Dated: February 9, 2016. Todd A. Stevenson, Secretary, Consumer Product Safety Commission. [FR Doc. 2016–02939 Filed 2–11–16; 8:45 am] BILLING CODE 6355–01–P CORPORATION FOR NATIONAL AND COMMUNITY SERVICE Proposed Information Collection; Comment Request CNCS. Notice. AGENCY: ACTION: The Corporation for National and Community Service (CNCS), as part of its continuing effort to reduce SUMMARY: E:\FR\FM\12FEN1.SGM 12FEN1

Agencies

Consumer Product Safety Commission

[Federal Register Volume 81, Number 29 (Friday, February 12, 2016)]
[Notices]
[Pages 7511-7512]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-02939]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

[Docket No. CPSC-2012-0026]


Agency Information Collection Activities; Proposed Collection; 
Comment Request; Requirements Pertaining to Third Party Conformity 
Assessment Bodies

AGENCY: Consumer Product Safety Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 
Chapter 35), the Consumer Product Safety Commission (``CPSC'' or 
``Commission'') requests comments on a proposed extension of approval 
of a collection of information under the requirements pertaining to 
third party conformity assessment bodies, approved previously under OMB 
Control No. 3041-0156. The Commission will consider all comments 
received in response to this notice before requesting an extension of 
this collection of information from the Office of Management and Budget 
(``OMB'').

DATES: Submit written or electronic comments on the collection of 
information by April 12, 2016.

ADDRESSES: You may submit comments, identified by Docket No. CPSC-2012-
0026, by any of the following methods:
    Electronic Submissions: Submit electronic comments to the Federal

[[Page 7512]]

eRulemaking Portal at: https://www.regulations.gov. Follow the 
instructions for submitting comments. The Commission does not accept 
comments submitted by electronic mail (email), except through 
www.regulations.gov. The Commission encourages you to submit electronic 
comments by using the Federal eRulemaking Portal, as described above.
    Written Submissions: Submit written submissions by mail/hand 
delivery/courier to: Office of the Secretary, Consumer Product Safety 
Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814; 
telephone (301) 504-7923.
    Instructions: All submissions received must include the agency name 
and docket number for this notice. All comments received may be posted 
without change, including any personal identifiers, contact 
information, or other personal information provided, to: https://www.regulations.gov. Do not submit confidential business information, 
trade secret information, or other sensitive or protected information 
that you do not want to be available to the public. If furnished at 
all, such information should be submitted in writing.
    Docket: For access to the docket to read background documents or 
comments received, go to: https://www.regulations.gov, and insert the 
docket number CPSC-2012-0026, into the ``Search'' box, and follow the 
prompts.

FOR FURTHER INFORMATION CONTACT: Robert H. Squibb, Consumer Product 
Safety Commission, 4330 East West Highway, Bethesda, MD 20814; (301) 
504-7815, or by email to: rsquibb@cpsc.gov.

SUPPLEMENTARY INFORMATION: CPSC seeks to renew the following currently 
approved collection of information:
    Title: Requirements Pertaining to Third Party Conformity Assessment 
Bodies.
    OMB Number: 3041-0156.
    Type of Review: Renewal of collection.
    Frequency of Response: On occasion.
    Affected Public: Third party conformity assessment bodies seeking 
acceptance of accreditation or continuing accreditation.
    Estimated Burden:
     New Applications from Third Party Conformity Assessment 
Bodies.
    [cir] We estimate approximately 40 new applications from 
independent third party conformity assessment bodies will be submitted 
per year, taking an estimated 75 minutes to complete the initial 
application materials, with an estimated burden of 50 hours per year.
    [cir] We estimate approximately 3 firewalled third party conformity 
assessment bodies will apply per year, taking an estimated 8.4 hours to 
complete the initial application materials, with an estimated burden of 
25.2 hours per year.
    [cir] We estimate approximately 4 governmental third party 
conformity assessment bodies will apply per year, taking an estimated 3 
hours to complete the initial application materials, with an estimated 
burden of 12 hours per year.
     Third party conformity assessment bodies updating 
information.
    [cir] We estimate that approximately 5 third party conformity 
assessment bodies will take 15 minutes to update information for only 
those elements of information that need updating, with an estimated 
burden of 1.35 hours per year.
     Third party conformity assessment bodies that subcontracts 
out tests.
    [cir] We estimate that approximately 27 third party conformity 
assessment bodies will take 7 minutes to comply with the subcontracting 
recordkeeping requirement for an estimated 68,769 subcontract test, 
with an estimated of approximately 8,023 hours per year.
     Third party conformity assessment bodies that voluntarily 
withdraw.
    [cir] We estimate approximately 8 third party conformity assessment 
bodies will withdraw yearly, taking an estimated 30 minutes to create 
and submit the required documentation, with an estimated burden of 4 
hours per year.
     Third party conformity assessment bodies that are audited.
    [cir] We estimate that approximately 228 independent third party 
conformity assessment bodies each year will be audited, taking 
approximately 4 minutes to resubmit their Form 223 and accreditation 
certificate, with an estimated burden of 15.2 hours per year.
    [cir] We estimate that approximately 18 firewalled third party 
conformity assessment bodies will spend 226 minutes collecting and 
preparing the documentation to submit for an audit, with estimated 
burden of about 68 hours per year.
    [cir] We estimate approximately 25 governmental third party 
conformity assessment bodies will spend 1 hour collecting and preparing 
the documentation to submit for an audit, with estimated burden of 25 
hours per year.
     Total Annual Burden.
    Adding all of the annual estimated burden hours results in a total 
of 8,224 hours for third party conformity assessment bodies per year. 
At $38.78 per hour, the total cost of the recordkeeping associated with 
the Requirements Pertaining to Third Party Conformity Assessment Bodies 
is approximately $318,927 (8,224 hours x $38.78 = $318,927).
    General Description of Collection: On March 12, 2013, the 
Commission issued a rule Pertaining to Third Party Conformity 
Assessment Bodies (78 FR 15836). The rule established the general 
requirements concerning third party conformity assessment bodies, such 
as the requirements and procedures for CPSC acceptance of the 
accreditation of a third party conformity assessment body, and 
prescribed adverse actions that may be imposed against CPSC-accepted 
third party conformity assessment bodies. The rule also amended the 
audit requirements for third party conformity assessment bodies and 
amends the Commission's regulation on inspections.

Request for Comments

    The Commission solicits written comments from all interested 
persons about the proposed collection of information. The Commission 
specifically solicits information relevant to the following topics:
--Whether the collection of information described above is necessary 
for the proper performance of the Commission's functions, including 
whether the information would have practical utility;
--Whether the estimated burden of the proposed collection of 
information is accurate;
--Whether the quality, utility, and clarity of the information to be 
collected could be enhanced; and
--Whether the burden imposed by the collection of information could be 
minimized by use of automated, electronic or other technological 
collection techniques, or other forms of information technology.

    Dated: February 9, 2016.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 2016-02939 Filed 2-11-16; 8:45 am]
BILLING CODE 6355-01-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.