Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters, 6751-6753 [2016-02233]
Download as PDF
Federal Register / Vol. 81, No. 26 / Tuesday, February 9, 2016 / Rules and Regulations
poultry or eggs has entered into a
contract for the growing or care of the
poultry or eggs. The indemnity the
Administrator may pay to such a party
or parties shall be determined as by the
following method:
(1) Divide the value in dollars of the
contract the owner entered into with the
contractor by the duration in days of the
contract as it was signed prior to the
highly pathogenic avian influenza
outbreak;
(2) Multiply this figure by the time in
days between the date the contractor
began to provide services relating to the
destroyed poultry or eggs under the
contract and the date the poultry or eggs
were destroyed due to highly
pathogenic avian influenza.
(b) If a contractor receiving indemnity
under this section has received any
payment under his or her contract from
the owner of the poultry or eggs at the
time the poultry or eggs are destroyed,
the amount of indemnity for which the
contractor is eligible will be reduced by
the amount of the payment the
contractor has already received.
(c) If indemnity is paid to a contractor
under this section, the owner of the
poultry or eggs will be eligible to receive
the difference between the indemnity
paid to the contractors and the total
amount of indemnity that may be paid
for the poultry or eggs.
(d) In the event that determination of
indemnity due a contractor using the
method described in paragraph (a) of
this section is determined to be
impractical or inappropriate, APHIS
may use any other method that the
Administrator deems appropriate to
make that determination.
Done in Washington, DC, this 3rd day of
February 2016.
Gary Woodward,
Deputy Under Secretary for Marketing and
Regulatory Programs.
[FR Doc. 2016–02530 Filed 2–8–16; 8:45 am]
mstockstill on DSK4VPTVN1PROD with RULES
BILLING CODE 3410–34–P
VerDate Sep<11>2014
16:23 Feb 08, 2016
Jkt 238001
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2016–2843; Directorate
Identifier 2015–SW–003–AD; Amendment
39–18392; AD 2016–03–05]
RIN 2120–AA64
Airworthiness Directives; Airbus
Helicopters Deutschland GmbH
Helicopters
Federal Aviation
Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule; request for
comments.
AGENCY:
We are superseding
airworthiness directive (AD) 2014–13–
01 for Airbus Helicopters Deutschland
GmbH (Airbus Helicopters) Model
MBB–BK 117 C–2 helicopters with a
certain Goodrich rescue hoist damper
unit (damper unit) installed. AD 2014–
13–01 required repairing or replacing
the damper unit or deactivating the
rescue hoist. AD 2014–13–01 was
prompted by a report of an
uncommanded detachment of a damper
unit from the cable. This new AD
retains the optional requirement of
deactivating the rescue hoist, expands
the applicability, and requires either
replacing or modifying the damper unit
with a newly developed single-piece
retainer. These actions are intended to
prevent the hoist damper unit detaching
from the cable resulting in loss of an
external load or person from the
helicopter hoist and injury to persons
being lifted by the hoist.
DATES: This AD becomes effective
February 24, 2016.
The Director of the Federal Register
approved the incorporation by reference
of certain documents listed in this AD
as of February 24, 2016.
We must receive comments on this
AD by April 11, 2016.
ADDRESSES: You may send comments by
any of the following methods:
• Federal eRulemaking Docket: Go to
https://www.regulations.gov. Follow the
online instructions for sending your
comments electronically.
• Fax: 202–493–2251.
• Mail: Send comments to the U.S.
Department of Transportation, Docket
Operations, M–30, West Building
Ground Floor, Room W12–140, 1200
New Jersey Avenue SE., Washington,
DC 20590–0001.
• Hand Delivery: Deliver to the
‘‘Mail’’ address between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays.
SUMMARY:
PO 00000
Frm 00007
Fmt 4700
Sfmt 4700
6751
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov by searching for
and locating Docket No. FAA–2016–
2843; or in person at the Docket
Operations Office between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays. The AD docket
contains this AD, the European Aviation
Safety Agency (EASA) AD, any
incorporated by reference service
information, the economic evaluation,
any comments received, and other
information. The street address for the
Docket Operations Office (telephone
800–647–5527) is in the ADDRESSES
section. Comments will be available in
the AD docket shortly after receipt.
For service information identified in
this final rule, contact Airbus
Helicopters, 2701 N. Forum Drive,
Grand Prairie, TX 75052; telephone
(972) 641–0000 or (800) 232–0323; fax
(972) 641–3775; or at https://www.airbus
helicopters.com/techpub. You may
review the referenced service
information at the FAA, Office of the
Regional Counsel, Southwest Region,
10101 Hillwood Pkwy., Room 6N–321,
Fort Worth, TX 76177.
FOR FURTHER INFORMATION CONTACT:
David N. Hatfield, Aviation Safety
Engineer, Safety Management Group,
Rotorcraft Directorate, FAA, 10101
Hillwood Pkwy., Fort Worth, TX 76177;
telephone (817) 222–5110; email
david.hatfield@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
This AD is a final rule that involves
requirements affecting flight safety, and
we did not provide you with notice and
an opportunity to provide your
comments prior to it becoming effective.
However, we invite you to participate in
this rulemaking by submitting written
comments, data, or views. We also
invite comments relating to the
economic, environmental, energy, or
federalism impacts that resulted from
adopting this AD. The most helpful
comments reference a specific portion of
the AD, explain the reason for any
recommended change, and include
supporting data. To ensure the docket
does not contain duplicate comments,
commenters should send only one copy
of written comments, or if comments are
filed electronically, commenters should
submit them only one time. We will file
in the docket all comments that we
receive, as well as a report summarizing
each substantive public contact with
FAA personnel concerning this
rulemaking during the comment period.
We will consider all the comments we
E:\FR\FM\09FER1.SGM
09FER1
6752
Federal Register / Vol. 81, No. 26 / Tuesday, February 9, 2016 / Rules and Regulations
receive and may conduct additional
rulemaking based on those comments.
mstockstill on DSK4VPTVN1PROD with RULES
Discussion
On June 13, 2014, we issued AD
2014–13–01, Amendment 39–17875 (79
FR 36635, June 30, 2014), to correct an
unsafe condition for Airbus Helicopters
Model MBB–BK 117 C–2 helicopters
with certain part-numbered damper
units installed. AD 2014–13–01 required
either repairing the damper unit,
replacing the damper unit with a
repaired damper unit, or deactivating
the rescue hoist system.
AD 2014–13–01 was prompted by AD
No. 2014–0057, dated March 6, 2014,
and corrected March 7, 2014, issued by
EASA, which is the Technical Agent for
the Member States of the European
Union. EASA advised that a damper
unit detached from the cable when the
hoist damper was lifted by hand with no
load attached. According to EASA, the
retaining ring inside the damper unit
was not located in the proper position
because of a maintenance error or as a
result of interference with the bonding
strap unit during normal use. To
address this unsafe condition, EASA AD
No. 2014–0057 required modifying the
bonding strap unit installation with an
improved retaining ring and postmodification repetitive inspection.
Actions Since AD 2014–13–01 Was
Issued
Since we issued AD 2014–13–01, a
damper unit with the improved
retaining ring detached from its strap.
Additionally, this damper unit was
approved for installation on Airbus
Helicopters Model MBB–BK 117 D–2
helicopters. EASA issued Emergency
AD No. 2015–0019–E, dated February 5,
2015, which superseded EASA AD No.
2014–0057, to add Model MBB–BK117
D–2 helicopters to the applicability.
Airbus subsequently introduced a new
single-piece retainer part number (P/N)
B851M2060201 to strengthen the
interconnection of the damper unit and
attached cable.
EASA has revised Emergency AD No.
2015–0019–E by issuing EASA AD No.
2015–0019R1, dated February 13, 2015,
for Model MBB–BK117 C–2 and MBB–
BK117 D–2 helicopters with a Goodrich
external mounted hoist. EASA AD No.
2015–0019R1 introduces installation of
single-piece retainer P/N
B851M2060201 as an option for
compliance and allows installation of
damper units provided if equipped with
the new single-piece retainer.
FAA’s Determination
These helicopters have been approved
by the aviation authority of Germany
VerDate Sep<11>2014
16:23 Feb 08, 2016
Jkt 238001
and are approved for operation in the
United States. Pursuant to our bilateral
agreement with Germany, EASA, its
technical representative, has notified us
of the unsafe condition described in the
EASA AD. We are issuing this AD
because we evaluated all information
provided by EASA and determined the
unsafe condition exists and is likely to
exist or develop on other helicopters of
these same type designs.
Related Service Information Under 1
CFR Part 51
We reviewed Airbus Helicopters
Emergency Alert Service Bulletin (ASB)
No. ASB MBB–BK117 C–2–85A–041,
Revision 4, dated February 12, 2015, for
Model MBB–BK 117 C–2 helicopters
and Emergency ASB No. ASB MBB–
BK117 D–2–85A–002, Revision 1, dated
February 12, 2015, for Model MBB–BK
117 D–2 helicopters. These Emergency
ASBs specify replacing the split
retainers with a single-piece retainer
and re-identifying the damper housing.
This service information is reasonably
available because the interested parties
have access to it through their normal
course of business or by the means
identified in the ADDRESSES section.
AD Requirements
This AD requires, before the next
hoist operation, either replacing the
damper unit with a unit that has been
repaired in accordance with the service
information, deactivating the rescue
hoist, or replacing each split retainer
with a single-piece retainer and marking
the damper housing in accordance with
the service information.
Costs of Compliance
We estimate that this AD affects 137
helicopters of U.S. Registry. We estimate
that operators may incur the following
costs in order to comply with this AD.
Labor costs are estimated at $85 per
work-hour. We estimate it takes 1 workhour to replace a damper unit and
$8,715 for the required parts for a total
cost of $8,800 per helicopter. We
estimate it takes 0.5 work-hour to
deactivate a rescue hoist for a total cost
of $43 per helicopter. We estimate it
takes 2 work-hours to replace the split
retainer with a single-piece retainer and
$171 for the required parts for a total
cost of $341 per helicopter.
FAA’s Justification and Determination
of the Effective Date
Providing an opportunity for public
comments prior to adopting these AD
requirements would delay
implementing the safety actions needed
to correct this known unsafe condition.
Therefore, we find that the risk to the
PO 00000
Frm 00008
Fmt 4700
Sfmt 4700
flying public justifies waiving notice
and comment prior to the adoption of
this rule because the required corrective
actions must be completed before the
next hoist operation.
Since an unsafe condition exists that
requires the immediate adoption of this
AD, we determined that notice and
opportunity for public comment before
issuing this AD are impracticable and
contrary to the public interest and that
good cause exists for making this
amendment effective in less than 30
days.
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. ‘‘Subtitle VII:
Aviation Programs,’’ describes in more
detail the scope of the Agency’s
authority.
We are issuing this rulemaking under
the authority described in ‘‘Subtitle VII,
Part A, Subpart III, Section 44701:
General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We determined that this AD will not
have federalism implications under
Executive Order 13132. This AD will
not have a substantial direct effect on
the States, on the relationship between
the national Government and the States,
or on the distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed, I certify
that this AD:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in
Alaska to the extent that it justifies
making a regulatory distinction; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared an economic evaluation
of the estimated costs to comply with
this AD and placed it in the AD docket.
E:\FR\FM\09FER1.SGM
09FER1
Federal Register / Vol. 81, No. 26 / Tuesday, February 9, 2016 / Rules and Regulations
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by
removing Airworthiness Directive (AD)
2014–13–01, Amendment 39–17875 (79
FR 36635, June 30, 2014), and adding
the following new AD:
■
2016–03–05 Airbus Helicopters
Deutschland GmbH: Amendment 39–
18392; Docket No. FAA–2016–2843;
Directorate Identifier 2015–SW–003–AD.
(a) Applicability
This AD applies to Model MBB–BK 117 C–
2 and MBB–BK 117 D–2 helicopters with a
Goodrich hoist damper unit, part number (P/
N) 44307–480, 44307–480–1, or 44307–480–
2 installed, certificated in any category.
(b) Unsafe Condition
This AD defines the unsafe condition as
uncommanded detachment of the external
hoist damper unit, which could result in loss
of an external load or person from the
helicopter hoist, resulting in injury to
persons being lifted by the hoist.
(c) Affected ADs
This AD supersedes AD 2014–13–01,
Amendment 39–17875 (79 FR 36635, June
30, 2014).
(d) Effective Date
This AD becomes effective February 24,
2016.
mstockstill on DSK4VPTVN1PROD with RULES
(e) Compliance
You are responsible for performing each
action required by this AD within the
specified compliance time unless it has
already been accomplished prior to that time.
(f) Required Actions
Before the next hoist operation, comply
with paragraph (f)(1), (f)(2), or (f)(3) of this
AD:
(1) Replace the split retainers and reidentify each hoist damper unit in
accordance with the Accomplishment
Instructions, paragraph 3.B.1, of Airbus
Helicopters Emergency Alert Service Bulletin
(ASB) No. ASB MBB–BK117 C–2–85A–041,
Revision 4, dated February 12, 2015, or
Emergency ASB No. ASB MBB–BK117 D–2–
85A–002, Revision 1, dated February 12,
2015, as applicable to your model helicopter;
or
VerDate Sep<11>2014
16:23 Feb 08, 2016
Jkt 238001
(2) Replace each hoist damper unit with a
unit that has been repaired as required by
paragraph (f)(1) of this AD; or
(3) Deactivate the rescue hoist system.
(g) Alternative Methods of Compliance
(AMOCs)
(1) The Manager, Safety Management
Group, FAA, may approve AMOCs for this
AD. Send your proposal to: David N.
Hatfield, Aviation Safety Engineer, Safety
Management Group, Rotorcraft Directorate,
FAA, 10101 Hillwood Pkwy, Fort Worth, TX
76177; telephone (817) 222–5110; email 9ASW-FTW-AMOC-Requests@faa.gov.
(2) For operations conducted under a 14
CFR part 119 operating certificate or under
14 CFR part 91, subpart K, we suggest that
you notify your principal inspector, or
lacking a principal inspector, the manager of
the local flight standards district office or
certificate holding district office, before
operating any aircraft complying with this
AD through an AMOC.
The subject of this AD is addressed in
European Aviation Safety Agency (EASA) AD
No. 2015–0019R1, dated February 13, 2015.
You may view the EASA AD on the Internet
at https://www.regulations.gov by searching
for and locating it in Docket No. FAA–2016–
2843.
(i) Subject
Joint Aircraft Service Component (JASC)
Code: 2500, Cabin Equipment/Furnishings.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register
approved the incorporation by reference of
the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR
part 51.
(2) You must use this service information
as applicable to do the actions required by
this AD, unless the AD specifies otherwise.
(i) Airbus Helicopters Emergency Alert
Service Bulletin (ASB) No. ASB MBB–BK117
C–2–85A–041, Revision 4, dated February 12,
2015.
(ii) Airbus Helicopters Emergency ASB No.
ASB MBB–BK117 D–2–85A–002, Revision 1,
dated February 12, 2015.
(3) For Airbus Helicopters service
information identified in this final rule,
contact Airbus Helicopters, 2701 N. Forum
Drive, Grand Prairie, TX 75052; telephone
(972) 641–0000 or (800) 232–0323; fax (972)
641–3775; or at https://www.airbus
helicopters.com/techpub.
(4) You may view this service information
at FAA, Office of the Regional Counsel,
Southwest Region, 10101 Hillwood Pkwy,
Room 6N–321, Fort Worth, TX 76177. For
information on the availability of this
material at the FAA, call (817) 222–5110.
(5) You may view this service information
that is incorporated by reference at the
National Archives and Records
Administration (NARA). For information on
the availability of this material at NARA, call
(202) 741–6030, or go to: https://www.
archives.gov/federal-register/cfr/ibrlocations.html.
Frm 00009
Fmt 4700
Sfmt 4700
Issued in Fort Worth, Texas, on January 29,
2016.
Lance T. Gant,
Manager, Rotorcraft Directorate, Aircraft
Certification Service.
[FR Doc. 2016–02233 Filed 2–8–16; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2015–3805; Directorate
Identifier 2015–NE–28–AD; Amendment 39–
18389; AD 2016–03–02]
RIN 2120–AA64
Airworthiness Directives; Turbomeca
S.A. Turboshaft Engines
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
AGENCY:
(h) Additional Information
PO 00000
6753
We are adopting a new
airworthiness directive (AD) for all
Turbomeca S.A. ARRIEL 2C, 2C1, 2C2,
2S1, and 2S2 turboshaft engines with
modification TU34 or TU34A installed.
This AD requires inspecting the torque
conformation box (TCB) for correct
resistance values and removing TCBs
that fail inspection before further flight.
This AD was prompted by TCB failures.
We are issuing this AD to prevent
failure of the TCB, loss of engine thrust
control, and damage to the helicopter.
DATES: This AD becomes effective
March 15, 2016.
The Director of the Federal Register
approved the incorporation by reference
of a certain publication listed in this AD
as of March 15, 2016.
ADDRESSES: For service information
identified in this AD, contact
Turbomeca S.A., 40220 Tarnos, France;
phone: 33 (0)5 59 74 40 00; fax: 33 (0)5
59 74 45 15. You may view this service
information at the FAA, Engine &
Propeller Directorate, 1200 District
Avenue, Burlington, MA. For
information on the availability of this
material at the FAA, call 781–238–7125.
It is also available on the Internet at
https://www.regulations.gov by searching
for and locating Docket No. FAA–2015–
3805.
SUMMARY:
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov by searching for
and locating Docket No. FAA–2015–
3805, or in person at the Docket
Management Facility between 9 a.m.
and 5 p.m., Monday through Friday,
E:\FR\FM\09FER1.SGM
09FER1
Agencies
[Federal Register Volume 81, Number 26 (Tuesday, February 9, 2016)]
[Rules and Regulations]
[Pages 6751-6753]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-02233]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2016-2843; Directorate Identifier 2015-SW-003-AD;
Amendment 39-18392; AD 2016-03-05]
RIN 2120-AA64
Airworthiness Directives; Airbus Helicopters Deutschland GmbH
Helicopters
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: We are superseding airworthiness directive (AD) 2014-13-01 for
Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB-BK
117 C-2 helicopters with a certain Goodrich rescue hoist damper unit
(damper unit) installed. AD 2014-13-01 required repairing or replacing
the damper unit or deactivating the rescue hoist. AD 2014-13-01 was
prompted by a report of an uncommanded detachment of a damper unit from
the cable. This new AD retains the optional requirement of deactivating
the rescue hoist, expands the applicability, and requires either
replacing or modifying the damper unit with a newly developed single-
piece retainer. These actions are intended to prevent the hoist damper
unit detaching from the cable resulting in loss of an external load or
person from the helicopter hoist and injury to persons being lifted by
the hoist.
DATES: This AD becomes effective February 24, 2016.
The Director of the Federal Register approved the incorporation by
reference of certain documents listed in this AD as of February 24,
2016.
We must receive comments on this AD by April 11, 2016.
ADDRESSES: You may send comments by any of the following methods:
Federal eRulemaking Docket: Go to https://www.regulations.gov. Follow the online instructions for sending your
comments electronically.
Fax: 202-493-2251.
Mail: Send comments to the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590-0001.
Hand Delivery: Deliver to the ``Mail'' address between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2016-
2843; or in person at the Docket Operations Office between 9 a.m. and 5
p.m., Monday through Friday, except Federal holidays. The AD docket
contains this AD, the European Aviation Safety Agency (EASA) AD, any
incorporated by reference service information, the economic evaluation,
any comments received, and other information. The street address for
the Docket Operations Office (telephone 800-647-5527) is in the
ADDRESSES section. Comments will be available in the AD docket shortly
after receipt.
For service information identified in this final rule, contact
Airbus Helicopters, 2701 N. Forum Drive, Grand Prairie, TX 75052;
telephone (972) 641-0000 or (800) 232-0323; fax (972) 641-3775; or at
https://www.airbushelicopters.com/techpub. You may review the referenced
service information at the FAA, Office of the Regional Counsel,
Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX
76177.
FOR FURTHER INFORMATION CONTACT: David N. Hatfield, Aviation Safety
Engineer, Safety Management Group, Rotorcraft Directorate, FAA, 10101
Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email
david.hatfield@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
This AD is a final rule that involves requirements affecting flight
safety, and we did not provide you with notice and an opportunity to
provide your comments prior to it becoming effective. However, we
invite you to participate in this rulemaking by submitting written
comments, data, or views. We also invite comments relating to the
economic, environmental, energy, or federalism impacts that resulted
from adopting this AD. The most helpful comments reference a specific
portion of the AD, explain the reason for any recommended change, and
include supporting data. To ensure the docket does not contain
duplicate comments, commenters should send only one copy of written
comments, or if comments are filed electronically, commenters should
submit them only one time. We will file in the docket all comments that
we receive, as well as a report summarizing each substantive public
contact with FAA personnel concerning this rulemaking during the
comment period. We will consider all the comments we
[[Page 6752]]
receive and may conduct additional rulemaking based on those comments.
Discussion
On June 13, 2014, we issued AD 2014-13-01, Amendment 39-17875 (79
FR 36635, June 30, 2014), to correct an unsafe condition for Airbus
Helicopters Model MBB-BK 117 C-2 helicopters with certain part-numbered
damper units installed. AD 2014-13-01 required either repairing the
damper unit, replacing the damper unit with a repaired damper unit, or
deactivating the rescue hoist system.
AD 2014-13-01 was prompted by AD No. 2014-0057, dated March 6,
2014, and corrected March 7, 2014, issued by EASA, which is the
Technical Agent for the Member States of the European Union. EASA
advised that a damper unit detached from the cable when the hoist
damper was lifted by hand with no load attached. According to EASA, the
retaining ring inside the damper unit was not located in the proper
position because of a maintenance error or as a result of interference
with the bonding strap unit during normal use. To address this unsafe
condition, EASA AD No. 2014-0057 required modifying the bonding strap
unit installation with an improved retaining ring and post-modification
repetitive inspection.
Actions Since AD 2014-13-01 Was Issued
Since we issued AD 2014-13-01, a damper unit with the improved
retaining ring detached from its strap. Additionally, this damper unit
was approved for installation on Airbus Helicopters Model MBB-BK 117 D-
2 helicopters. EASA issued Emergency AD No. 2015-0019-E, dated February
5, 2015, which superseded EASA AD No. 2014-0057, to add Model MBB-BK117
D-2 helicopters to the applicability. Airbus subsequently introduced a
new single-piece retainer part number (P/N) B851M2060201 to strengthen
the interconnection of the damper unit and attached cable.
EASA has revised Emergency AD No. 2015-0019-E by issuing EASA AD
No. 2015-0019R1, dated February 13, 2015, for Model MBB-BK117 C-2 and
MBB-BK117 D-2 helicopters with a Goodrich external mounted hoist. EASA
AD No. 2015-0019R1 introduces installation of single-piece retainer P/N
B851M2060201 as an option for compliance and allows installation of
damper units provided if equipped with the new single-piece retainer.
FAA's Determination
These helicopters have been approved by the aviation authority of
Germany and are approved for operation in the United States. Pursuant
to our bilateral agreement with Germany, EASA, its technical
representative, has notified us of the unsafe condition described in
the EASA AD. We are issuing this AD because we evaluated all
information provided by EASA and determined the unsafe condition exists
and is likely to exist or develop on other helicopters of these same
type designs.
Related Service Information Under 1 CFR Part 51
We reviewed Airbus Helicopters Emergency Alert Service Bulletin
(ASB) No. ASB MBB-BK117 C-2-85A-041, Revision 4, dated February 12,
2015, for Model MBB-BK 117 C-2 helicopters and Emergency ASB No. ASB
MBB-BK117 D-2-85A-002, Revision 1, dated February 12, 2015, for Model
MBB-BK 117 D-2 helicopters. These Emergency ASBs specify replacing the
split retainers with a single-piece retainer and re-identifying the
damper housing.
This service information is reasonably available because the
interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
AD Requirements
This AD requires, before the next hoist operation, either replacing
the damper unit with a unit that has been repaired in accordance with
the service information, deactivating the rescue hoist, or replacing
each split retainer with a single-piece retainer and marking the damper
housing in accordance with the service information.
Costs of Compliance
We estimate that this AD affects 137 helicopters of U.S. Registry.
We estimate that operators may incur the following costs in order to
comply with this AD. Labor costs are estimated at $85 per work-hour. We
estimate it takes 1 work-hour to replace a damper unit and $8,715 for
the required parts for a total cost of $8,800 per helicopter. We
estimate it takes 0.5 work-hour to deactivate a rescue hoist for a
total cost of $43 per helicopter. We estimate it takes 2 work-hours to
replace the split retainer with a single-piece retainer and $171 for
the required parts for a total cost of $341 per helicopter.
FAA's Justification and Determination of the Effective Date
Providing an opportunity for public comments prior to adopting
these AD requirements would delay implementing the safety actions
needed to correct this known unsafe condition. Therefore, we find that
the risk to the flying public justifies waiving notice and comment
prior to the adoption of this rule because the required corrective
actions must be completed before the next hoist operation.
Since an unsafe condition exists that requires the immediate
adoption of this AD, we determined that notice and opportunity for
public comment before issuing this AD are impracticable and contrary to
the public interest and that good cause exists for making this
amendment effective in less than 30 days.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
Government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska to the extent that
it justifies making a regulatory distinction; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared an economic evaluation of the estimated costs to comply
with this AD and placed it in the AD docket.
[[Page 6753]]
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by removing Airworthiness Directive (AD)
2014-13-01, Amendment 39-17875 (79 FR 36635, June 30, 2014), and adding
the following new AD:
2016-03-05 Airbus Helicopters Deutschland GmbH: Amendment 39-18392;
Docket No. FAA-2016-2843; Directorate Identifier 2015-SW-003-AD.
(a) Applicability
This AD applies to Model MBB-BK 117 C-2 and MBB-BK 117 D-2
helicopters with a Goodrich hoist damper unit, part number (P/N)
44307-480, 44307-480-1, or 44307-480-2 installed, certificated in
any category.
(b) Unsafe Condition
This AD defines the unsafe condition as uncommanded detachment
of the external hoist damper unit, which could result in loss of an
external load or person from the helicopter hoist, resulting in
injury to persons being lifted by the hoist.
(c) Affected ADs
This AD supersedes AD 2014-13-01, Amendment 39-17875 (79 FR
36635, June 30, 2014).
(d) Effective Date
This AD becomes effective February 24, 2016.
(e) Compliance
You are responsible for performing each action required by this
AD within the specified compliance time unless it has already been
accomplished prior to that time.
(f) Required Actions
Before the next hoist operation, comply with paragraph (f)(1),
(f)(2), or (f)(3) of this AD:
(1) Replace the split retainers and re-identify each hoist
damper unit in accordance with the Accomplishment Instructions,
paragraph 3.B.1, of Airbus Helicopters Emergency Alert Service
Bulletin (ASB) No. ASB MBB-BK117 C-2-85A-041, Revision 4, dated
February 12, 2015, or Emergency ASB No. ASB MBB-BK117 D-2-85A-002,
Revision 1, dated February 12, 2015, as applicable to your model
helicopter; or
(2) Replace each hoist damper unit with a unit that has been
repaired as required by paragraph (f)(1) of this AD; or
(3) Deactivate the rescue hoist system.
(g) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Safety Management Group, FAA, may approve AMOCs
for this AD. Send your proposal to: David N. Hatfield, Aviation
Safety Engineer, Safety Management Group, Rotorcraft Directorate,
FAA, 10101 Hillwood Pkwy, Fort Worth, TX 76177; telephone (817) 222-
5110; email 9-ASW-FTW-AMOC-Requests@faa.gov.
(2) For operations conducted under a 14 CFR part 119 operating
certificate or under 14 CFR part 91, subpart K, we suggest that you
notify your principal inspector, or lacking a principal inspector,
the manager of the local flight standards district office or
certificate holding district office, before operating any aircraft
complying with this AD through an AMOC.
(h) Additional Information
The subject of this AD is addressed in European Aviation Safety
Agency (EASA) AD No. 2015-0019R1, dated February 13, 2015. You may
view the EASA AD on the Internet at https://www.regulations.gov by
searching for and locating it in Docket No. FAA-2016-2843.
(i) Subject
Joint Aircraft Service Component (JASC) Code: 2500, Cabin
Equipment/Furnishings.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) Airbus Helicopters Emergency Alert Service Bulletin (ASB)
No. ASB MBB-BK117 C-2-85A-041, Revision 4, dated February 12, 2015.
(ii) Airbus Helicopters Emergency ASB No. ASB MBB-BK117 D-2-85A-
002, Revision 1, dated February 12, 2015.
(3) For Airbus Helicopters service information identified in
this final rule, contact Airbus Helicopters, 2701 N. Forum Drive,
Grand Prairie, TX 75052; telephone (972) 641-0000 or (800) 232-0323;
fax (972) 641-3775; or at https://www.airbushelicopters.com/techpub.
(4) You may view this service information at FAA, Office of the
Regional Counsel, Southwest Region, 10101 Hillwood Pkwy, Room 6N-
321, Fort Worth, TX 76177. For information on the availability of
this material at the FAA, call (817) 222-5110.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call (202) 741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Fort Worth, Texas, on January 29, 2016.
Lance T. Gant,
Manager, Rotorcraft Directorate, Aircraft Certification Service.
[FR Doc. 2016-02233 Filed 2-8-16; 8:45 am]
BILLING CODE 4910-13-P