Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Chemical Manufacturing Area Sources, 4623 [2016-01636]
Download as PDF
Federal Register / Vol. 81, No. 17 / Wednesday, January 27, 2016 / Notices
burden from the most recently approved
ICR. The increase in respondent labor
hour is caused by a change in
assumption; in this ICR, we assume all
existing sources will take some time
each year to re-familiarize themselves
with the rule requirements. There is also
a small increase in the total O&M cost
due to rounding of all calculated values
to three significant digits.
Courtney Kerwin,
Acting Director, Collection Strategies
Division.
[FR Doc. 2016–01635 Filed 1–26–16; 8:45 am]
BILLING CODE 6560–50–P
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW.,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2012–0525; FRL–9941–
78–OEI]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; NESHAP
for Chemical Manufacturing Area
Sources
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency has submitted an information
collection request (ICR), ‘‘NESHAP for
Chemical Manufacturing Area Sources
(40 CFR part 63, subpart VVVVVV)’’
(EPA ICR No. 2323.06, OMB Control No.
2060–0621) to the Office of Management
and Budget (OMB) for review and
approval in accordance with the
Paperwork Reduction Act (44 U.S.C.
3501 et seq.). This is a proposed
extension of the ICR, which is currently
approved through January 31, 2016.
Public comments were previously
requested via the Federal Register (80
FR 32116) on June 5, 2015 during a 60day comment period. This notice allows
for an additional 30 days for public
comments. A fuller description of the
ICR is given below, including its
estimated burden and cost to the public.
An Agency may not conduct or sponsor
and a person is not required to respond
to a collection of information unless it
displays a currently valid OMB control
number.
DATES: Additional comments may be
submitted on or before February 26,
2016.
ADDRESSES: Submit your comments,
referencing Docket ID Number EPA–
HQ–OECA–2012–0525, to (1) EPA
online using www.regulations.gov (our
preferred method), by email to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center, Environmental
asabaliauskas on DSK5VPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
19:41 Jan 26, 2016
Jkt 238001
Patrick Yellin, Monitoring, Assistance,
and Media Programs Division, Office of
Compliance, Mail Code 2227A,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington,
DC 20460; telephone number: (202)
564–2970; fax number: (202) 564–0050;
email address: yellin.patrick@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents which explain in
detail the information that the EPA will
be collecting are available in the public
docket for this ICR. The docket can be
viewed online at www.regulations.gov
or in person at the EPA Docket Center,
EPA West, Room 3334, 1301
Constitution Ave. NW., Washington,
DC. The telephone number for the
Docket Center is 202–566–1744. For
additional information about EPA’s
public docket, visit https://www.epa.gov/
dockets.
Abstract: These standards apply to the
area source NESHAP for chemical
manufacturing (40 CFR part 63, subpart
VVVVVV). There are nine area source
categories in the chemical
manufacturing sector: Agricultural
Chemicals and Pesticides
Manufacturing, Cyclic Crude and
Intermediate Production, Industrial
Inorganic Chemical Manufacturing,
Industrial Organic Chemical
Manufacturing, Inorganic Pigments
Manufacturing, Miscellaneous Organic
Chemical Manufacturing, Plastic
Materials and Resins Manufacturing,
Pharmaceutical Production, and
Synthetic Rubber Manufacturing. The
requirements apply to process vents,
storage tanks, equipment leaks,
wastewater systems, transfer operations,
and heat exchange systems at affected
sources in each area source category and
are combined in one subpart. The
standards are based on EPA’s
determination of generally available
control technology (GACT) or
management practices for each area
source category.
Form Numbers: None.
PO 00000
Frm 00016
Fmt 4703
Sfmt 4703
4623
Respondents/affected entities:
Chemical manufacturing area source
facilities.
Respondent’s obligation to respond:
Mandatory (40 CFR part 63, subpart
VVVVVV).
Estimated number of respondents:
498 (total).
Frequency of response: Initially and
semiannually.
Total estimated burden: 9,590 hours
(per year). Burden is defined at 5 CFR
1320.3(b).
Total estimated cost: $2,220,000 (per
year), includes $1,250,000 annualized
capital or operation & maintenance
costs.
Changes in the Estimates: There is an
adjustment decrease in the respondent
burden and number of responses from
the most recently approved ICR. The
decrease occurred because the rule has
been in effect for three years, and the
burden associated with initial
compliance (e.g. initial performance
tests and notification reports) differ
from the burden for ongoing compliance
(e.g. submittal of semiannual reports).
However, there is an adjustment
increase in the total capital and O&M
cost. This is primarily due to two
reasons: (1) The previous ICR presented
capital costs as annualized costs over 15
years, rather than one-time costs; and (2)
the total number of sources with O&M
cost (i.e. maintain systems and
monitors) has increased now that the
rule is fully implemented.
Courtney Kerwin,
Acting Director, Collection Strategies
Division.
[FR Doc. 2016–01636 Filed 1–26–16; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2014–0643; FRL–9941–32]
Sulfoxaflor; Receipt of Application for
Emergency Exemption, Solicitation of
Public Comment
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA has received a specific
exemption request from the Texas
Department of Agriculture to use the
insecticide sulfoxaflor (CAS No.
946578–00–3) to treat up to 3,000,000
acres of sorghum to control sugarcane
aphid. The applicant proposes a use of
a pesticide, sulfoxaflor, which is now
considered to be unregistered under the
Federal Insecticide, Fungicide, and
Rodenticide Act (FIFRA) owing to the
SUMMARY:
E:\FR\FM\27JAN1.SGM
27JAN1
Agencies
[Federal Register Volume 81, Number 17 (Wednesday, January 27, 2016)]
[Notices]
[Page 4623]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-01636]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OECA-2012-0525; FRL-9941-78-OEI]
Information Collection Request Submitted to OMB for Review and
Approval; Comment Request; NESHAP for Chemical Manufacturing Area
Sources
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency has submitted an
information collection request (ICR), ``NESHAP for Chemical
Manufacturing Area Sources (40 CFR part 63, subpart VVVVVV)'' (EPA ICR
No. 2323.06, OMB Control No. 2060-0621) to the Office of Management and
Budget (OMB) for review and approval in accordance with the Paperwork
Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of
the ICR, which is currently approved through January 31, 2016. Public
comments were previously requested via the Federal Register (80 FR
32116) on June 5, 2015 during a 60-day comment period. This notice
allows for an additional 30 days for public comments. A fuller
description of the ICR is given below, including its estimated burden
and cost to the public. An Agency may not conduct or sponsor and a
person is not required to respond to a collection of information unless
it displays a currently valid OMB control number.
DATES: Additional comments may be submitted on or before February 26,
2016.
ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2012-0525, to (1) EPA online using www.regulations.gov (our
preferred method), by email to docket.oeca@epa.gov, or by mail to: EPA
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200
Pennsylvania Ave. NW., Washington, DC 20460, and (2) OMB via email to
oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for
EPA.
EPA's policy is that all comments received will be included in the
public docket without change including any personal information
provided, unless the comment includes profanity, threats, information
claimed to be Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute.
FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring,
Assistance, and Media Programs Division, Office of Compliance, Mail
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave.
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax
number: (202) 564-0050; email address: yellin.patrick@epa.gov.
SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail
the information that the EPA will be collecting are available in the
public docket for this ICR. The docket can be viewed online at
www.regulations.gov or in person at the EPA Docket Center, EPA West,
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone
number for the Docket Center is 202-566-1744. For additional
information about EPA's public docket, visit https://www.epa.gov/dockets.
Abstract: These standards apply to the area source NESHAP for
chemical manufacturing (40 CFR part 63, subpart VVVVVV). There are nine
area source categories in the chemical manufacturing sector:
Agricultural Chemicals and Pesticides Manufacturing, Cyclic Crude and
Intermediate Production, Industrial Inorganic Chemical Manufacturing,
Industrial Organic Chemical Manufacturing, Inorganic Pigments
Manufacturing, Miscellaneous Organic Chemical Manufacturing, Plastic
Materials and Resins Manufacturing, Pharmaceutical Production, and
Synthetic Rubber Manufacturing. The requirements apply to process
vents, storage tanks, equipment leaks, wastewater systems, transfer
operations, and heat exchange systems at affected sources in each area
source category and are combined in one subpart. The standards are
based on EPA's determination of generally available control technology
(GACT) or management practices for each area source category.
Form Numbers: None.
Respondents/affected entities: Chemical manufacturing area source
facilities.
Respondent's obligation to respond: Mandatory (40 CFR part 63,
subpart VVVVVV).
Estimated number of respondents: 498 (total).
Frequency of response: Initially and semiannually.
Total estimated burden: 9,590 hours (per year). Burden is defined
at 5 CFR 1320.3(b).
Total estimated cost: $2,220,000 (per year), includes $1,250,000
annualized capital or operation & maintenance costs.
Changes in the Estimates: There is an adjustment decrease in the
respondent burden and number of responses from the most recently
approved ICR. The decrease occurred because the rule has been in effect
for three years, and the burden associated with initial compliance
(e.g. initial performance tests and notification reports) differ from
the burden for ongoing compliance (e.g. submittal of semiannual
reports). However, there is an adjustment increase in the total capital
and O&M cost. This is primarily due to two reasons: (1) The previous
ICR presented capital costs as annualized costs over 15 years, rather
than one-time costs; and (2) the total number of sources with O&M cost
(i.e. maintain systems and monitors) has increased now that the rule is
fully implemented.
Courtney Kerwin,
Acting Director, Collection Strategies Division.
[FR Doc. 2016-01636 Filed 1-26-16; 8:45 am]
BILLING CODE 6560-50-P