Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting, 1619 [2016-00513]
Download as PDF
<![CDATA[
Federal Register / Vol. 81, No. 8 / Wednesday, January 13, 2016 / Notices
the delegate of the General Counsel,
formally determined on January 8, 2016,
pursuant to section 10(d) of the Federal
Advisory Committee Act, as amended (5
U.S.C. app. 2 section (10)(d))), that the
portion of the meeting concerning trade
secrets and commercial or financial
information deemed privileged or
confidential as described in 5 U.S.C.
552b(c)(4) and the portion of the
meeting concerning matters the
disclosure of which would be likely to
frustrate significantly implementation of
an agency action as described in 5
U.S.C. 552b(c)(9)(B) shall be exempt
from the provisions relating to public
meetings found in 5 U.S.C. app. 2
sections 10(a)(1) and 10(a)(3). The
remaining portions of the meeting will
be open to the public.
For more information, call Yvette
Springer at (202) 482–2813.
Dated: January 8, 2016.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2016–00509 Filed 1–12–16; 8:45 am]
BILLING CODE 3510–JT–P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Technical Advisory Committees;
Notice of Recruitment of Private-Sector
Members
Seven Technical Advisory
Committees (TACs) advise the
Department of Commerce on the
technical parameters for export controls
applicable to dual-use commodities and
technology and on the administration of
those controls. The TACs are composed
of representatives from industry
representatives, academic leaders and
U.S. Government representing diverse
points of view on the concerns of the
exporting community. Industry
representatives are selected from firms
producing a broad range of goods,
technologies, and software presently
controlled for national security, nonproliferation, foreign policy, and short
supply reasons or that are proposed for
such controls, balanced to the extent
possible among large and small firms.
TAC members are appointed by the
Secretary of Commerce and serve terms
of not more than four consecutive years.
The membership reflects the
Department’s commitment to attaining
balance and diversity. TAC members
must obtain secret-level clearances prior
to appointment. These clearances are
necessary so that members may be
permitted access to the classified
information needed to formulate
recommendations to the Department of
asabaliauskas on DSK5VPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
16:59 Jan 12, 2016
Jkt 238001
Commerce. Each TAC meets
approximately four times per year.
Members of the Committees will not be
compensated for their services.
The seven TACs are responsible for
advising the Department of Commerce
on the technical parameters for export
controls and the administration of those
controls within the following areas:
Information Systems TAC: Control List
Categories 3 (electronics), 4 (computers),
and 5 (telecommunications and
information security); Materials TAC:
Control List Category 1 (materials,
chemicals, microorganisms, and toxins);
Materials Processing Equipment TAC:
Control List Category 2 (materials
processing); Regulations and Procedures
TAC: The Export Administration
Regulations (EAR) and Procedures for
implementing the EAR; Sensors and
Instrumentation TAC: Control List
Category 6 (sensors and lasers);
Transportation and Related Equipment
TAC: Control List Categories 7
(navigation and avionics), 8 (marine),
and 9 (propulsion systems, space
vehicles, and related equipment) and
the Emerging Technology and Research
Advisory Committee: (1) The
identification of emerging technologies
and research and development activities
that may be of interest from a dual-use
perspective; (2) the prioritization of new
and existing controls to determine
which are of greatest consequence to
national security; (3) the potential
impact of dual-use export control
requirements on research activities; and
(4) the threat to national security posed
by the unauthorized exports of
technologies.
To respond to this recruitment notice,
please send a copy of your resume to
Ms. Yvette Springer at Yvette.Springer@
bis.doc.gov.
Deadline: This Notice of Recruitment
will be open for one year from its date
of publication in the Federal Register.
FOR FURTHER INFORMATION CONTACT: Ms.
Yvette Springer on (202) 482–2813.
Dated: January 7, 2016.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2016–00510 Filed 1–12–16; 8:45 am]
BILLING CODE 3510–JT–P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Sensors and Instrumentation
Technical Advisory Committee; Notice
of Partially Closed Meeting
The Sensors and Instrumentation
Technical Advisory Committee (SITAC)
will meet on January 26, 2016, 9:30
PO 00000
Frm 00022
Fmt 4703
Sfmt 9990
1619
a.m., in the Herbert C. Hoover Building,
Room 3884, 14th Street between
Constitution and Pennsylvania Avenues
NW., Washington, DC. The Committee
advises the Office of the Assistant
Secretary for Export Administration on
technical questions that affect the level
of export controls applicable to sensors
and instrumentation equipment and
technology.
Agenda
Public Session:
1. Welcome and Introductions.
2. Remarks from the Bureau of
Industry and Security Management.
3. Industry Presentations.
4. New Business.
Closed Session:
5. Discussion of matters determined to
be exempt from the provisions relating
to public meetings found in 5 U.S.C.
app. 2 sections 10(a)(1) and 10(a)(3).
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at Yvette.Springer@
bis.doc.gov no later than January 19,
2016.
A limited number of seats will be
available during the public session of
the meeting. Reservations are not
accepted. To the extent that time
permits, members of the public may
present oral statements to the
Committee. The public may submit
written statements at any time before or
after the meeting. However, to facilitate
distribution of public presentation
materials to the Committee members,
the Committee suggests that the
materials be forwarded before the
meeting to Ms. Springer.
The Assistant Secretary for
Administration, with the concurrence of
the General Counsel, formally
determined on November 5, 2015
pursuant to section 10(d) of the Federal
Advisory Committee Act, as amended (5
U.S.C. app. 2 section 10(d), that the
portion of this meeting dealing with predecisional changes to the Commerce
Control List and U.S. export control
policies shall be exempt from the
provisions relating to public meetings
found in 5 U.S.C. app. 2 sections
10(a)(1) and 10(a)(3). The remaining
portions of the meeting will be open to
the public.
For more information contact Yvette
Springer on (202) 482–2813.
Dated: January 7, 2016.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2016–00513 Filed 1–12–16; 8:45 am]
BILLING CODE P
E:\FR\FM\13JAN1.SGM
13JAN1
]]>Agencies
[Federal Register Volume 81, Number 8 (Wednesday, January 13, 2016)]
[Notices]
[Page 1619]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-00513]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Sensors and Instrumentation Technical Advisory Committee; Notice
of Partially Closed Meeting
The Sensors and Instrumentation Technical Advisory Committee
(SITAC) will meet on January 26, 2016, 9:30 a.m., in the Herbert C.
Hoover Building, Room 3884, 14th Street between Constitution and
Pennsylvania Avenues NW., Washington, DC. The Committee advises the
Office of the Assistant Secretary for Export Administration on
technical questions that affect the level of export controls applicable
to sensors and instrumentation equipment and technology.
Agenda
Public Session:
1. Welcome and Introductions.
2. Remarks from the Bureau of Industry and Security Management.
3. Industry Presentations.
4. New Business.
Closed Session:
5. Discussion of matters determined to be exempt from the
provisions relating to public meetings found in 5 U.S.C. app. 2
sections 10(a)(1) and 10(a)(3).
The open session will be accessible via teleconference to 20
participants on a first come, first serve basis. To join the
conference, submit inquiries to Ms. Yvette Springer at
Yvette.Springer@bis.doc.gov no later than January 19, 2016.
A limited number of seats will be available during the public
session of the meeting. Reservations are not accepted. To the extent
that time permits, members of the public may present oral statements to
the Committee. The public may submit written statements at any time
before or after the meeting. However, to facilitate distribution of
public presentation materials to the Committee members, the Committee
suggests that the materials be forwarded before the meeting to Ms.
Springer.
The Assistant Secretary for Administration, with the concurrence of
the General Counsel, formally determined on November 5, 2015 pursuant
to section 10(d) of the Federal Advisory Committee Act, as amended (5
U.S.C. app. 2 section 10(d), that the portion of this meeting dealing
with pre-decisional changes to the Commerce Control List and U.S.
export control policies shall be exempt from the provisions relating to
public meetings found in 5 U.S.C. app. 2 sections 10(a)(1) and
10(a)(3). The remaining portions of the meeting will be open to the
public.
For more information contact Yvette Springer on (202) 482-2813.
Dated: January 7, 2016.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2016-00513 Filed 1-12-16; 8:45 am]
BILLING CODE P
