Airworthiness Directives; Bombardier Inc. Airplanes, 1586-1588 [2016-00171]

Download as PDF 1586 Federal Register / Vol. 81, No. 8 / Wednesday, January 13, 2016 / Proposed Rules (4) Bombardier Service Bulletin 700–52– 6008, Revision 01, dated February 3, 2015 (for Model BD–700–1A10 airplanes). (h) Credit for Previous Actions This paragraph provides credit for actions required by paragraph (g) of this AD, if those actions were performed before the effective date of this AD using the following service information, as applicable. This service information is not incorporated by reference in this AD. (1) Bombardier Service Bulletin 700– 1A11–52–021, dated November 9, 2012. (2) Bombardier Service Bulletin 700–52– 044, dated November 9, 2012. (3) Bombardier Service Bulletin 700–52– 5008, dated November 9, 2012. (4) Bombardier Service Bulletin 700–52– 6008, dated November 9, 2012. asabaliauskas on DSK5VPTVN1PROD with PROPOSALS (i) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE–170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the ACO, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7300; fax 516–794–5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. The AMOC approval letter must specifically reference this AD. (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO, ANE–170, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.’s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (j) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian Airworthiness Directive CF–2015–03, dated March 25, 2015, for related information. This MCAI may be found in the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA– 2015–8435. (2) For service information identified in ˆ this AD, contact Bombardier, Inc., 400 Cote´ Vertu Road West, Dorval, Quebec H4S 1Y9, Canada; telephone 514–855–5000; fax 514– 855–7401; email thd.crj@ aero.bombardier.com; Internet https:// www.bombardier.com. You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. VerDate Sep<11>2014 16:20 Jan 12, 2016 Jkt 238001 Issued in Renton, Washington, on December 30, 2015. Phil Forde, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2016–00169 Filed 1–12–16; 8:45 am] BILLING CODE 4910–13–P Internet https://www.bombardier.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. Examining the AD Docket DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–8434; Directorate Identifier 2015–NM–082–AD] RIN 2120–AA64 Airworthiness Directives; Bombardier Inc. Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC–8–401 and –402 airplanes. This proposed AD was prompted by a discovery of cracking on two test spoiler power control unit (PCU) manifolds during testing by the manufacturer. This proposed AD would require replacement of affected spoiler PCUs. We are proposing this AD to prevent cracking of the spoiler PCUs that could lead to the loss of multiple flight controls and landing gear systems. DATES: We must receive comments on this proposed AD by February 29, 2016. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416–375– 4000; fax 416–375–4539; email thd.qseries@aero.bombardier.com; SUMMARY: PO 00000 Frm 00024 Fmt 4702 Sfmt 4702 You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 8434; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone 800–647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE–171, FAA, New York Aircraft Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7318; fax 516–794–5531. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2015–8434; Directorate Identifier 2015–NM–082–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD based on those comments. We will post all comments we receive, without change, to https:// www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD. Discussion Transport Canada Civil Aviation, which is the aviation authority for Canada, has issued Canadian Airworthiness Directive CF–2015–07, dated April 28, 2015 (referred to after this as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct an unsafe condition for certain Bombardier, Inc. Model E:\FR\FM\13JAP1.SGM 13JAP1 Federal Register / Vol. 81, No. 8 / Wednesday, January 13, 2016 / Proposed Rules DHC–8–401 and -402 airplanes. The MCAI states: During endurance and impulse testing of the spoiler PCU, cracks were discovered on two test spoiler PCU manifolds. Investigation determined that the crack initiation was due to the heat treat process. A cracked spoiler PCU manifold could cause the loss of one of the two hydraulic systems, resulting in the loss of multiple flight controls and landing gear systems. This condition, if not corrected, could adversely affect the continued safe operation and landing of the aeroplane. This [Canadian] AD mandates the replacement of the affected spoiler PCUs. You may examine the MCAI in the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 8434. Related Service Information Under 1 CFR Part 51 Bombardier, Inc. has issued Bombardier Service Bulletin 84–27–64, dated July 15, 2014. The service information describes procedures for identification and replacement of affected spoiler PCU manifolds. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. asabaliauskas on DSK5VPTVN1PROD with PROPOSALS FAA’s Determination and Requirements of This Proposed AD This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all pertinent information and determined an unsafe condition exists and is likely to exist or develop on other products of the same type design. Costs of Compliance We estimate that this proposed AD affects 82 airplanes of U.S. registry. We also estimate that it would take about 2 work-hours per product to comply with the basic requirements of this proposed AD. The average labor rate is $85 per work-hour. Required parts would cost about $10,000 per product. Based on these figures, we estimate the cost of this proposed AD on U.S. operators to be $833,940, or $10,170 per product. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, VerDate Sep<11>2014 16:20 Jan 12, 2016 Jkt 238001 section 106, describes the authority of the FAA Administrator. ‘‘Subtitle VII: Aviation Programs,’’ describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in ‘‘Subtitle VII, Part A, Subpart III, Section 44701: General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: 1. Is not a ‘‘significant regulatory action’’ under Executive Order 12866; 2. Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ PO 00000 Frm 00025 Fmt 4702 Sfmt 4702 1587 Bombardier, Inc.: Docket No. FAA–2015– 8434; Directorate Identifier 2015–NM– 082–AD. (a) Comments Due Date We must receive comments by February 29, 2016. (b) Affected ADs None. (c) Applicability This AD applies to Bombardier, Inc. Model DHC–8–401 and -402 airplanes, certificated in any category, serial numbers (S/Ns) 4001, and 4003 through 4453 inclusive, equipped with spoiler power control unit (PCU) part numbers (P/Ns) 390700–1007 and 1009, S/Ns 0474 through 1321 and 1394 through 1876 without suffix ‘‘A.’’ (d) Subject Air Transport Association (ATA) of America Code 27, Flight Control System. (e) Reason This AD was prompted by the discovery of cracking on two test spoiler power control unit (PCU) manifolds during testing by the manufacturer. We are issuing this AD to prevent cracking of the spoiler PCUs that could lead to the loss of multiple flight controls and landing gear systems. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Inspection/Replacement Within 12,000 flight hours or 72 months after the effective date of this AD, whichever occurs first: Remove and replace the affected spoiler PCUs in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 84–27–64, dated July 15, 2014. (h) Parts Installation Prohibition After paragraph (g) of this AD has been done, no person may install, on any airplane, a spoiler PCU, part number 390700–1007 or –1009, serial numbers 0474 through 1321 and 1394 through 1876, without suffix ‘‘A.’’ (i) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE–170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the ACO, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7300; fax 516–794–5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. The AMOC E:\FR\FM\13JAP1.SGM 13JAP1 1588 Federal Register / Vol. 81, No. 8 / Wednesday, January 13, 2016 / Proposed Rules approval letter must specifically reference this AD. (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO, ANE–170, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.’s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (j) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian Airworthiness Directive CF–2015–07, dated April 28, 2015, for related information. This MCAI may be found in the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA– 2015–8434. (2) For service information identified in this AD, contact Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416–375–4000; fax 416–375–4539; email thd.qseries@aero.bombardier.com; Internet https://www.bombardier.com. You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. Issued in Renton, Washington, on December 31, 2015. Phil Forde, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2016–00171 Filed 1–12–16; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–8432; Directorate Identifier 2015–NM–100–AD] RIN 2120–AA64 Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). asabaliauskas on DSK5VPTVN1PROD with PROPOSALS AGENCY: We propose to adopt a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This proposed AD was prompted by reports of ruptured horizontal stabilizer de-icing boots. This proposed AD would require a revision of the applicable airplane flight manual (AFM), repetitive inspections of the SUMMARY: VerDate Sep<11>2014 16:20 Jan 12, 2016 Jkt 238001 horizontal stabilizer de-icing boots, and applicable corrective actions. We are proposing this AD to detect and correct damage of the de-icing boot; such damage could lead to a ruptured boot, severe vibrations, and possible reduced control of the airplane. DATES: We must receive comments on this proposed AD by February 29, 2016. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact Saab AB, Saab Aeronautics, SE–581 88, ¨ Linkoping, Sweden; telephone +46 13 18 5591; fax +46 13 18 4874; email saab2000.techsupport@saabgroup.com; Internet https://www.saabgroup.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 8432; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone 800–647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aerospace Engineer, International Branch, ANM– 116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057–3356; telephone (425) 227– 1112; fax (425) 227–1149. SUPPLEMENTARY INFORMATION: PO 00000 Frm 00026 Fmt 4702 Sfmt 4702 Comments Invited We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2015–8432; Directorate Identifier 2015–NM–100–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD based on those comments. We will post all comments we receive, without change, to https:// www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD. Discussion The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Union, has issued EASA Airworthiness Directive 2015–0129, dated July 6, 2015 (referred to after this as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct an unsafe condition for certain Saab AB, Saab Aeronautics Model 340A (SAAB/ SF340A) and SAAB 340B airplanes. The MCAI states: There have been some reported events of ruptured horizontal stabilizer de-icing boots. In-flight rupture of a de-icing boot will result in complete loss of the de-icing function within its associated zone. In addition, in some of these events, the de-icing boot had formed a large open scoop. This condition, if not detected and corrected, could lead to severe vibrations, possibly resulting in reduced control of the aeroplane. To address this potential unsafe condition, SAAB issued Alert Operations Bulletin (AOB) No.12 and AOB No. 23 as a temporary measure, recommending performing a flap 0 landing in the event of a suspected rupture of the de-icing boot on the horizontal stabilizer. In addition, SAAB issued SB 340–30–094 to provide instructions to inspect the affected de-icing boots. For the reasons described above, this [EASA] AD requires an amendment of the applicable Airplane Flight Manual (AFM) and, pending the development of a modification by SAAB, repetitive inspections of the horizontal stabilizer de-icing boots and, depending on findings, accomplishment of applicable corrective action(s). This [EASA] AD is considered to be an interim action and further AD action may follow. You may examine the MCAI in the AD docket on the Internet at https:// www.regulations.gov by searching for E:\FR\FM\13JAP1.SGM 13JAP1

Agencies

[Federal Register Volume 81, Number 8 (Wednesday, January 13, 2016)]
[Proposed Rules]
[Pages 1586-1588]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-00171]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2015-8434; Directorate Identifier 2015-NM-082-AD]
RIN 2120-AA64


Airworthiness Directives; Bombardier Inc. Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
certain Bombardier, Inc. Model DHC-8-401 and -402 airplanes. This 
proposed AD was prompted by a discovery of cracking on two test spoiler 
power control unit (PCU) manifolds during testing by the manufacturer. 
This proposed AD would require replacement of affected spoiler PCUs. We 
are proposing this AD to prevent cracking of the spoiler PCUs that 
could lead to the loss of multiple flight controls and landing gear 
systems.

DATES: We must receive comments on this proposed AD by February 29, 
2016.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday 
through Friday, except Federal holidays.
    For service information identified in this proposed AD, contact 
Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, 
Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax 416-375-
4539; email thd.qseries@aero.bombardier.com; Internet https://www.bombardier.com. You may view this referenced service information at 
the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
WA. For information on the availability of this material at the FAA, 
call 425-227-1221.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2015-
8434; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Operations office (telephone 800-647-5527) is in the ADDRESSES section. 
Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, 
Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft 
Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, 
NY 11590; telephone 516-228-7318; fax 516-794-5531.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposed AD. Send your comments to an address 
listed under the ADDRESSES section. Include ``Docket No. FAA-2015-8434; 
Directorate Identifier 2015-NM-082-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD based on those comments.
    We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We 
will also post a report summarizing each substantive verbal contact we 
receive about this proposed AD.

Discussion

    Transport Canada Civil Aviation, which is the aviation authority 
for Canada, has issued Canadian Airworthiness Directive CF-2015-07, 
dated April 28, 2015 (referred to after this as the Mandatory 
Continuing Airworthiness Information, or ``the MCAI''), to correct an 
unsafe condition for certain Bombardier, Inc. Model

[[Page 1587]]

DHC-8-401 and -402 airplanes. The MCAI states:

    During endurance and impulse testing of the spoiler PCU, cracks 
were discovered on two test spoiler PCU manifolds. Investigation 
determined that the crack initiation was due to the heat treat 
process. A cracked spoiler PCU manifold could cause the loss of one 
of the two hydraulic systems, resulting in the loss of multiple 
flight controls and landing gear systems. This condition, if not 
corrected, could adversely affect the continued safe operation and 
landing of the aeroplane.
    This [Canadian] AD mandates the replacement of the affected 
spoiler PCUs.

    You may examine the MCAI in the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2015-
8434.

Related Service Information Under 1 CFR Part 51

    Bombardier, Inc. has issued Bombardier Service Bulletin 84-27-64, 
dated July 15, 2014. The service information describes procedures for 
identification and replacement of affected spoiler PCU manifolds. This 
service information is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in the ADDRESSES section.

FAA's Determination and Requirements of This Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to our bilateral agreement with the State of Design Authority, we have 
been notified of the unsafe condition described in the MCAI and service 
information referenced above. We are proposing this AD because we 
evaluated all pertinent information and determined an unsafe condition 
exists and is likely to exist or develop on other products of the same 
type design.

Costs of Compliance

    We estimate that this proposed AD affects 82 airplanes of U.S. 
registry.
    We also estimate that it would take about 2 work-hours per product 
to comply with the basic requirements of this proposed AD. The average 
labor rate is $85 per work-hour. Required parts would cost about 
$10,000 per product. Based on these figures, we estimate the cost of 
this proposed AD on U.S. operators to be $833,940, or $10,170 per 
product.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979);
    3. Will not affect intrastate aviation in Alaska; and
    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

Bombardier, Inc.: Docket No. FAA-2015-8434; Directorate Identifier 
2015-NM-082-AD.

(a) Comments Due Date

    We must receive comments by February 29, 2016.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Bombardier, Inc. Model DHC-8-401 and -402 
airplanes, certificated in any category, serial numbers (S/Ns) 4001, 
and 4003 through 4453 inclusive, equipped with spoiler power control 
unit (PCU) part numbers (P/Ns) 390700-1007 and 1009, S/Ns 0474 
through 1321 and 1394 through 1876 without suffix ``A.''

(d) Subject

    Air Transport Association (ATA) of America Code 27, Flight 
Control System.

(e) Reason

    This AD was prompted by the discovery of cracking on two test 
spoiler power control unit (PCU) manifolds during testing by the 
manufacturer. We are issuing this AD to prevent cracking of the 
spoiler PCUs that could lead to the loss of multiple flight controls 
and landing gear systems.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Inspection/Replacement

    Within 12,000 flight hours or 72 months after the effective date 
of this AD, whichever occurs first: Remove and replace the affected 
spoiler PCUs in accordance with the Accomplishment Instructions of 
Bombardier Service Bulletin 84-27-64, dated July 15, 2014.

(h) Parts Installation Prohibition

    After paragraph (g) of this AD has been done, no person may 
install, on any airplane, a spoiler PCU, part number 390700-1007 or 
-1009, serial numbers 0474 through 1321 and 1394 through 1876, 
without suffix ``A.''

(i) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York Aircraft Certification Office (ACO), ANE-170, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the ACO, send it to ATTN: Program Manager, Continuing 
Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 
410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. 
Before using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
local flight standards district office/certificate holding district 
office. The AMOC

[[Page 1588]]

approval letter must specifically reference this AD.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO, 
ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

(j) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian Airworthiness Directive CF-2015-07, dated April 28, 
2015, for related information. This MCAI may be found in the AD 
docket on the Internet at https://www.regulations.gov by searching 
for and locating Docket No. FAA-2015-8434.
    (2) For service information identified in this AD, contact 
Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt 
Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; 
fax 416-375-4539; email thd.qseries@aero.bombardier.com; Internet 
https://www.bombardier.com. You may view this service information at 
the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., 
Renton, WA. For information on the availability of this material at 
the FAA, call 425-227-1221.

    Issued in Renton, Washington, on December 31, 2015.
Phil Forde,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2016-00171 Filed 1-12-16; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.