Foreign-Trade Zone (FTZ) 133-Quad-Cities, Iowa/Illinois; Authorization of Production Activity; CNH Industrial America, LLC; Subzone 133E, (Agricultural and Construction Equipment, Subassemblies and Kits), Burlington and West Burlington, Iowa, 1165 [2016-363]
Download as PDF
<![CDATA[
Federal Register / Vol. 81, No. 6 / Monday, January 11, 2016 / Notices
Custom Quality Services, within Site 1,
in Louisville, Kentucky.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 55086,
September 14, 2015). The FTZ Board
has determined that no further review of
the activity is warranted at this time.
The production activity described in the
notification is authorized, subject to the
FTZ Act and the Board’s regulations,
including Section 400.14.
Dated: December 31, 2015.
Andrew McGilvray,
Executive Secretary.
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–63–2015]
mstockstill on DSK4VPTVN1PROD with NOTICES
Foreign-Trade Zone (FTZ) 33—
Pittsburgh, Pennsylvania;
Authorization of Production Activity;
DNP Imagingcomm America
Corporation, Subzone 33E (Thermal
Transfer Ribbon Master Rolls), Mount
Pleasant, Pennsylvania
On September 4, 2015, DNP
Imagingcomm America Corporation
(DNP), operator of Subzone 33E,
submitted a notification of proposed
production activity to the Foreign-Trade
Zones (FTZ) Board for its facility within
Subzone 33E, in Mount Pleasant,
Pennsylvania.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 57785,
September 25, 2015). The FTZ Board
has determined that no further review of
the proposed activity is warranted at
this time. The production activity
described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14, and further subject to a
restriction requiring that all foreignstatus polyethylene terephthalate (PET)
film subject to an antidumping/
countervailing duty (AD/CVD) order,
proceeding, or suspension of liquidation
under AD/CVD procedures admitted for
DNP’s production activity be reexported (entry for U.S. consumption is
not allowed for thermal transfer ribbon
master rolls made from PET film subject
to an AD/CVD order, proceeding, or
suspension of liquidation under AD/
CVD procedures). Activity beyond this
18:17 Jan 08, 2016
Jkt 238001
Dated: January 4, 2016.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016–364 Filed 1–8–16; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–58–2015]
Foreign-Trade Zone (FTZ) 133—QuadCities, Iowa/Illinois; Authorization of
Production Activity; CNH Industrial
America, LLC; Subzone 133E,
(Agricultural and Construction
Equipment, Subassemblies and Kits),
Burlington and West Burlington, Iowa
[FR Doc. 2016–362 Filed 1–8–16; 8:45 am]
VerDate Sep<11>2014
scope of authority would require further
authorization from the FTZ Board.
On September 2, 2015, CNH
Industrial America, LLC, operator of
Subzone 133E, submitted a notification
of proposed production activity to the
Foreign-Trade Zones (FTZ) Board for its
facilities within Subzone 133E, in
Burlington and West Burlington, Iowa.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 54519,
September 10, 2015). The FTZ Board
has determined that no further review of
the activity is warranted at this time.
The production activity described in the
notification is authorized, subject to the
FTZ Act and the Board’s regulations,
including Section 400.14.
Dated: December 31, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016–363 Filed 1–8–16; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–533–820]
Certain Hot-Rolled Carbon Steel Flat
Products From India: Final Results of
Antidumping Duty Administrative
Review; 2013–2014
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: On September 10, 2015, the
Department of Commerce (the
Department) published the preliminary
results of the administrative review of
the antidumping duty (AD) order on
certain hot-rolled carbon steel flat
AGENCY:
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
1165
products (hot-rolled steel) from India.1
We received no comments or requests
for a hearing. Therefore, for the final
results, we continue to find that Ispat
Industries Ltd. (Ispat), JSW Steel Ltd.
(JSW), JSW Ispat Steel Ltd. (JSW Ispat),
and Tata Steel Ltd. (Tata) had no
shipments of the subject merchandise,
and, therefore, no reviewable
transactions, during the period of
review (POR).
DATES: Effective Date: January 11, 2016.
FOR FURTHER INFORMATION CONTACT:
George McMahon or Eric Greynolds,
AD/CVD Operations Office III,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 14th
Street and Constitution Avenue NW.,
Washington, DC 20230; telephone: (202)
482–1167 and (202) 482–6071,
respectively.
Background
On September 10, 2015, the
Department published the Preliminary
Results. The POR is December 1, 2013,
through November 30, 2014. We invited
interested parties to comment on the
Preliminary Results. We received no
comments from any party. The
Department conducted this
administrative review in accordance
with section 751(a)(2) of the Tariff Act
of 1930, as amended (the Act).
Scope of the Order
For purposes of this order, the
products covered are certain hot-rolled
carbon steel flat products of a
rectangular shape, of a width of 0.5 inch
or greater, neither clad, plated, nor
coated with metal and whether or not
painted, varnished, or coated with
plastics or other non-metallic
substances, in coils (whether or not in
successively superimposed layers),
regardless of thickness, and in straight
lengths of a thickness of less than 4.75
mm and of a width measuring at least
10 times the thickness. Universal mill
plate (i.e., flat-rolled products rolled on
four faces or in a closed box pass, of a
width exceeding 150 mm, but not
exceeding 1250 mm, and of a thickness
of not less than 4.0 mm, not in coils and
without patterns in relief) of a thickness
not less than 4.0 mm is not included
within the scope of this order.
Specifically included in the scope of
this order are vacuum-degassed, fully
stabilized (commonly referred to as
interstitial-free (IF)) steels, high-strength
1 See Certain Hot-Rolled Carbon Steel Flat
Products from India: Notice of Preliminary Results
of 2013–2014 Antidumping Duty Administrative
Review, 80 FR 54521 (September 10, 2015)
(Preliminary Results).
E:\FR\FM\11JAN1.SGM
11JAN1
]]>Agencies
[Federal Register Volume 81, Number 6 (Monday, January 11, 2016)]
[Notices]
[Page 1165]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-363]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-58-2015]
Foreign-Trade Zone (FTZ) 133--Quad-Cities, Iowa/Illinois;
Authorization of Production Activity; CNH Industrial America, LLC;
Subzone 133E, (Agricultural and Construction Equipment, Subassemblies
and Kits), Burlington and West Burlington, Iowa
On September 2, 2015, CNH Industrial America, LLC, operator of
Subzone 133E, submitted a notification of proposed production activity
to the Foreign-Trade Zones (FTZ) Board for its facilities within
Subzone 133E, in Burlington and West Burlington, Iowa.
The notification was processed in accordance with the regulations
of the FTZ Board (15 CFR part 400), including notice in the Federal
Register inviting public comment (80 FR 54519, September 10, 2015). The
FTZ Board has determined that no further review of the activity is
warranted at this time. The production activity described in the
notification is authorized, subject to the FTZ Act and the Board's
regulations, including Section 400.14.
Dated: December 31, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2016-363 Filed 1-8-16; 8:45 am]
BILLING CODE 3510-DS-P
