Agency Information Collection Activities; Proposed eCollection eComments Requested; Manufacturers of Ammunition, Records and Supporting Data of Ammunition Manufactured and Disposed of, 77022 [2015-31249]
Download as PDF
<![CDATA[
77022
Federal Register / Vol. 80, No. 238 / Friday, December 11, 2015 / Notices
information to be collected can be
enhanced; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
jstallworth on DSK7TPTVN1PROD with NOTICES
Overview of This Information
Collection 1140–0001
1. Type of Information Collection
(check justification or form 83):
Extension of a currently approved
collection.
2. The Title of the Form/Collection:
ATF Distribution Center Contractor
Survey.
3. The agency form number, if any,
and the applicable component of the
Department sponsoring the collection:
Form number (if applicable): ATF F
1370.4.
Component: Bureau of Alcohol,
Tobacco, Firearms and Explosives, U.S.
Department of Justice.
4. Affected public who will be asked
or required to respond, as well as a brief
abstract:
Primary: Businesses or other forprofit.
Other (if applicable): Individuals or
households.
Abstract: The form is used to evaluate
the ATF Distribution Center, and the
services it provides to the users of ATF
forms and publications.
5. An estimate of the total number of
respondents and the amount of time
estimated for an average respondent to
respond: An estimated 240 respondents
will take 1 minute to complete the
survey.
6. An estimate of the total public
burden (in hours) associated with the
collection: The estimated annual public
burden associated with this collection is
4 hours.
If additional information is required
contact: Jerri Murray, Department
Clearance Officer, United States
Department of Justice, Justice
Management Division, Policy and
Planning Staff, Two Constitution
Square, 145 N Street NE., Room 3E–
405B, Washington, DC 20530.
Dated: December 8, 2015.
Jerri Murray,
Department Clearance Officer for PRA, U.S.
Department of Justice.
[FR Doc. 2015–31248 Filed 12–10–15; 8:45 am]
BILLING CODE 4410–FY–P
VerDate Sep<11>2014
14:55 Dec 10, 2015
Jkt 238001
DEPARTMENT OF JUSTICE
[OMB Number 1140–0066]
Agency Information Collection
Activities; Proposed eCollection
eComments Requested; Manufacturers
of Ammunition, Records and
Supporting Data of Ammunition
Manufactured and Disposed of
Bureau of Alcohol, Tobacco,
Firearms and Explosives, Department of
Justice.
ACTION: 60-Day notice.
AGENCY:
The Department of Justice
(DOJ), Bureau of Alcohol, Tobacco,
Firearms and Explosives (ATF), will
submit the following information
collection request to the Office of
Management and Budget (OMB) for
review and approval in accordance with
the Paperwork Reduction Act of 1995.
DATES: Comments are encouraged and
will be accepted for 60 days until
February 9, 2016.
FOR FURTHER INFORMATION CONTACT: If
you have additional comments
especially on the estimated public
burden or associated response time,
suggestions, or need a copy of the
proposed information collection
instrument with instructions or
additional information, please contact
Rinell Lawrence, Firearms Enforcement
Specialist, Firearms Industry Program,
99 New York Avenue NE. 20226 at
email: Fipb-informationcollection@
atf.gov.
SUMMARY:
Written
comments and suggestions from the
public and affected agencies concerning
the proposed collection of information
are encouraged. Your comments should
address one or more of the following
four points:
• Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
• Evaluate whether and if so how the
quality, utility, and clarity of the
information to be collected can be
enhanced; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
SUPPLEMENTARY INFORMATION:
PO 00000
Frm 00097
Fmt 4703
Sfmt 4703
e.g., permitting electronic submission of
responses.
Overview of this information
collection 1140–0066:
1. Type of Information Collection
(check justification or form 83):
Revision of a currently approved
collection.
2. The Title of the Form/Collection:
Manufacturers of Ammunition, Records
and Supporting Data of Ammunition
Manufactured and Disposed of
3. The agency form number, if any,
and the applicable component of the
Department sponsoring the collection:
Form number (if applicable): None.
Component: Bureau of Alcohol,
Tobacco, Firearms and Explosives, U.S.
Department of Justice.
4. Affected public who will be asked
or required to respond, as well as a brief
abstract:
Primary: Business.
Other (if applicable): None.
Abstract: ATF uses manufacturer’s
records information during
investigations, inspections for criminal
activity, or for compliance purposes.
5. An estimate of the total number of
respondents and the amount of time
estimated for an average respondent to
respond: An estimated 159 respondents
will take two (2) minutes (.033 hours) to
complete the survey.
6. An estimate of the total public
burden (in hours) associated with the
collection: The estimated annual public
burden associated with this collection is
5.25 hours.
If additional information is required
contact: Jerri Murray, Department
Clearance Officer, United States
Department of Justice, Justice
Management Division, Policy and
Planning Staff, Two Constitution
Square, 145 N Street NE., Room 3E–
405B, Washington, DC 20530.
Dated: December 8, 2015.
Jerri Murray,
Department Clearance Officer for PRA, U.S.
Department of Justice.
[FR Doc. 2015–31249 Filed 12–10–15; 8:45 am]
BILLING CODE 4410–FY–P
DEPARTMENT OF JUSTICE
[OMB Number 1121–0339]
Agency Information Collection
Activities; Proposed eCollection
eComments Requested; Extension of a
Currently Approved Collection;
Comments Requested: Generic
Clearance for Cognitive, Pilot and Field
Studies for Bureau of Justice Statistics
Data Collection Activities
Bureau of Justice Statistics,
Department of Justice.
AGENCY:
E:\FR\FM\11DEN1.SGM
11DEN1
]]>Agencies
[Federal Register Volume 80, Number 238 (Friday, December 11, 2015)]
[Notices]
[Page 77022]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-31249]
-----------------------------------------------------------------------
DEPARTMENT OF JUSTICE
[OMB Number 1140-0066]
Agency Information Collection Activities; Proposed eCollection
eComments Requested; Manufacturers of Ammunition, Records and
Supporting Data of Ammunition Manufactured and Disposed of
AGENCY: Bureau of Alcohol, Tobacco, Firearms and Explosives, Department
of Justice.
ACTION: 60-Day notice.
-----------------------------------------------------------------------
SUMMARY: The Department of Justice (DOJ), Bureau of Alcohol, Tobacco,
Firearms and Explosives (ATF), will submit the following information
collection request to the Office of Management and Budget (OMB) for
review and approval in accordance with the Paperwork Reduction Act of
1995.
DATES: Comments are encouraged and will be accepted for 60 days until
February 9, 2016.
FOR FURTHER INFORMATION CONTACT: If you have additional comments
especially on the estimated public burden or associated response time,
suggestions, or need a copy of the proposed information collection
instrument with instructions or additional information, please contact
Rinell Lawrence, Firearms Enforcement Specialist, Firearms Industry
Program, 99 New York Avenue NE. 20226 at email: Fipb-informationcollection@atf.gov.
SUPPLEMENTARY INFORMATION: Written comments and suggestions from the
public and affected agencies concerning the proposed collection of
information are encouraged. Your comments should address one or more of
the following four points:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility;
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used;
Evaluate whether and if so how the quality, utility, and
clarity of the information to be collected can be enhanced; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Overview of this information collection 1140-0066:
1. Type of Information Collection (check justification or form 83):
Revision of a currently approved collection.
2. The Title of the Form/Collection: Manufacturers of Ammunition,
Records and Supporting Data of Ammunition Manufactured and Disposed of
3. The agency form number, if any, and the applicable component of
the Department sponsoring the collection:
Form number (if applicable): None.
Component: Bureau of Alcohol, Tobacco, Firearms and Explosives,
U.S. Department of Justice.
4. Affected public who will be asked or required to respond, as
well as a brief abstract:
Primary: Business.
Other (if applicable): None.
Abstract: ATF uses manufacturer's records information during
investigations, inspections for criminal activity, or for compliance
purposes.
5. An estimate of the total number of respondents and the amount of
time estimated for an average respondent to respond: An estimated 159
respondents will take two (2) minutes (.033 hours) to complete the
survey.
6. An estimate of the total public burden (in hours) associated
with the collection: The estimated annual public burden associated with
this collection is 5.25 hours.
If additional information is required contact: Jerri Murray,
Department Clearance Officer, United States Department of Justice,
Justice Management Division, Policy and Planning Staff, Two
Constitution Square, 145 N Street NE., Room 3E-405B, Washington, DC
20530.
Dated: December 8, 2015.
Jerri Murray,
Department Clearance Officer for PRA, U.S. Department of Justice.
[FR Doc. 2015-31249 Filed 12-10-15; 8:45 am]
BILLING CODE 4410-FY-P
