The Commerce Control List, 76629 [2015-31130]
Download as PDF
<![CDATA[
76629
Rules and Regulations
Federal Register
Vol. 80, No. 237
Thursday, December 10, 2015
This section of the FEDERAL REGISTER
contains regulatory documents having general
applicability and legal effect, most of which
are keyed to and codified in the Code of
Federal Regulations, which is published under
50 titles pursuant to 44 U.S.C. 1510.
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 774
The Commerce Control List
The Code of Federal Regulations is sold by
the Superintendent of Documents. Prices of
new books are listed in the first FEDERAL
REGISTER issue of each week.
ACTION:
CFR Correction
In Title 15 of the Code of Federal
Regulations, Parts 300 to 799, revised as
of January 1, 2015, on page 829, in
supplement no. 1 to part 774, make the
following two corrections:
■ 1. In Category 2, ECCN 2B008, in the
List of Items Controlled section, under
‘‘Items’’, correctly revise paragraph a. to
read as follows:
OFFICE OF PERSONNEL
MANAGEMENT
5 CFR Part 531
Pay Under the General Schedule
CFR Correction
In Title 5 of the Code of Federal
Regulations, Parts 1 to 699, revised as of
January 1, 2015, on page 399, in
§ 531.403, in the second column, the
definition of ‘‘Next higher rate within
the grade’’ is removed and replaced by
the revised definition of ‘‘Next higher
rate within the grade’’ from the first
column.
■
[FR Doc. 2015–31128 Filed 12–9–15; 8:45 am]
BILLING CODE 1505–01–D
2B008 Assemblies or Units, Specially
Designed for Machine Tools, or Dimensional
Inspection or Measuring Systems and
Equipment, as Follows (see List of Items
Controlled)
*
*
*
*
*
List of Items Controlled
*
*
*
*
*
Items:
a. Linear position feedback units having an
overall ‘‘accuracy’’ less (better) than (800 +
(600 × L × 10¥3)) nm (L equals the effective
length in mm);
N.B.: For ‘‘laser’’ systems see also
2B006.b.1.c and d.
2. In Category 2, ECCN 2B009, in the
List of Items Controlled section, under
‘‘Items’’, correctly revise paragraph a. to
read ‘‘a. Three or more axes which can
be coordinated simultaneously for
‘‘contouring control’’; and’’
■
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 738
Commerce Control List Overview and
the Country Chart
CFR Correction
In Title 15 of the Code of Federal
Regulations, Parts 300 to 799, revised as
of January 1, 2015, on page 261, in
Supplement No. 1 to Part 738—
Commerce Country Chart, remove
footnote 1 from Congo (Republic of the)
and add footnote 1 to Congo
(Democratic Republic of the).
■
Lhorne on DSK5TPTVN1PROD with RULES
[FR Doc. 2015–31132 Filed 12–9–15; 8:45 am]
BILLING CODE 1505–01–D
[FR Doc. 2015–31130 Filed 12–9–15; 8:45 am]
BILLING CODE 1505–01–D
DEPARTMENT OF HOMELAND
SECURITY
U S. Bureau of Customs and Border
Protection
DEPARTMENT OF THE TREASURY
19 CFR Part 10
Articles Conditionally Free, Subject to
a Reduced Rate, etc.
CFR Correction
In Title 19 of the Code of Federal
Regulations, Parts 0 to 140, revised as of
April 1, 2015, on page 353, § 10.846 is
correctly revised to read as follows:
■
VerDate Sep<11>2014
12:16 Dec 09, 2015
Jkt 238001
PO 00000
Frm 00001
Fmt 4700
Sfmt 4700
§ 10.846
Imported directly.
(a) Textile and apparel articles. To be
eligible for duty-free treatment under
this subpart, textile and apparel articles
described in paragraphs (a) through (j)
of § 10.843 of this subpart must be
imported directly from Haiti or the
Dominican Republic into the customs
territory of the United States. For
purposes of this requirement, the words
‘‘imported directly from Haiti or the
Dominican Republic’’ mean:
(1) Direct shipment from Haiti or the
Dominican Republic to the United
States without passing through the
territory of any intermediate country;
(2) If shipment is from Haiti or the
Dominican Republic to the United
States through the territory of an
intermediate country, the articles in the
shipment do not enter into the
commerce of the intermediate country
and the invoices, bills of lading, and
other shipping documents show the
United States as the final destination; or
(3) If shipment is through an
intermediate country and the invoices
and other documents do not show the
United States as the final destination,
the articles in the shipment are
imported directly only if they:
(i) Remained under the control of the
customs authority in the intermediate
country;
(ii) Did not enter into the commerce
of the intermediate country except for
the purpose of a sale other than at retail;
and
(iii) Have not been subjected to
operations other than loading and
unloading, and other activities
necessary to preserve the articles in
good condition.
(b) Wiring sets. To be eligible for dutyfree treatment under this subpart,
articles described in paragraph (k) of
§ 10.843 of this subpart must be
imported directly from Haiti into the
customs territory of the United States.
For purposes of this requirement, the
words ‘‘imported directly from Haiti’’
mean:
(1) Direct shipment from Haiti to the
United States without passing through
the territory of any intermediate
country;
(2) If shipment is from Haiti to the
United States through the territory of an
intermediate country, the articles in the
shipment do not enter into the
commerce of the intermediate country
and the invoices, bills of lading, and
E:\FR\FM\10DER1.SGM
10DER1
]]>Agencies
[Federal Register Volume 80, Number 237 (Thursday, December 10, 2015)]
[Rules and Regulations]
[Page 76629]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-31130]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 774
The Commerce Control List
ACTION: CFR Correction
-----------------------------------------------------------------------
In Title 15 of the Code of Federal Regulations, Parts 300 to 799,
revised as of January 1, 2015, on page 829, in supplement no. 1 to part
774, make the following two corrections:
0
1. In Category 2, ECCN 2B008, in the List of Items Controlled section,
under ``Items'', correctly revise paragraph a. to read as follows:
2B008 Assemblies or Units, Specially Designed for Machine Tools, or
Dimensional Inspection or Measuring Systems and Equipment, as Follows
(see List of Items Controlled)
* * * * *
List of Items Controlled
* * * * *
Items:
a. Linear position feedback units having an overall ``accuracy''
less (better) than (800 + (600 x L x 10-3)) nm (L equals
the effective length in mm);
N.B.: For ``laser'' systems see also 2B006.b.1.c and d.
0
2. In Category 2, ECCN 2B009, in the List of Items Controlled section,
under ``Items'', correctly revise paragraph a. to read ``a. Three or
more axes which can be coordinated simultaneously for ``contouring
control''; and''
[FR Doc. 2015-31130 Filed 12-9-15; 8:45 am]
BILLING CODE 1505-01-D
