November 30, 2015 – Federal Register Recent Federal Regulation Documents

Results 101 - 122 of 122
Airworthiness Directives; Embraer S.A. Airplanes
Document Number: 2015-30224
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Embraer S.A. Model ERJ 170 airplanes; and all Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. This proposed AD was prompted by reports of cracks in certain engine low-stage bleed check valves. This proposed AD would require replacing the air management system (AMS) controller operation program of the AMS controller processor boards, and replacement of the current low-stage bleed check valve and associated seals. We are proposing this AD to prevent failure of the low-stage bleed check valve, which could result in dual engine in-flight shutdown.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-30223
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by reports of a manufacturing oversight, in which a supplier omitted the required protective finish on certain bushings installed in the rear spar upper chord on horizontal stabilizers, which could lead to galvanic corrosion and consequent cracking of the rear spar upper chord. This proposed AD would require an inspection or records check to determine if affected horizontal stabilizers are installed, related investigative actions, and for affected horizontal stabilizers, repetitive inspections for any crack of the horizontal stabilizer rear spar upper chord, and corrective action if necessary. We are proposing this AD to detect and correct cracking of the rear spar upper chord, which can result in the failure of the upper chord and consequent departure of the horizontal stabilizer from the airplane, which can lead to loss of continued safe flight and landing.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-30218
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, A320, and A321 series airplanes. This proposed AD was prompted by reports of cracking of the aft fixed fairing (AFF) of the pylons due to fatigue damage of the structure. This proposed AD would require repetitive inspections for damage and cracking of the AFF of the pylons, and repair if necessary. We are proposing this AD to detect and correct damage and cracking of the AFF of the pylons, which could result in detachment of a pylon and consequent reduced structural integrity of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-30217
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the bulkhead is subject to widespread fatigue damage (WFD). This proposed AD would require repetitive inspections of the aft pressure bulkhead web for any cracking, incorrectly drilled fastener holes, and elongated fastener holes, and related investigative and corrective actions if necessary. We are proposing this AD to detect and correct fatigue cracking of the aft pressure bulkhead web at the ``Y''-chord, which could result in reduced structural integrity of the airplane and rapid decompression of the fuselage.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-30216
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; Model A319-111, -112, -113, - 114, and -115 airplanes; Model A320-211, -212, and -214 airplanes; and Model A321-111, -112, -211, -212, and -213 airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the forward engine mounts are subject to widespread fatigue damage (WFD). This proposed AD would require repetitive detailed inspections of the right and left forward engine mounts, and corrective action if necessary. These inspections are required by AD 2015-05-02. This proposed AD would reduce the compliance times for those inspections. We are proposing this AD to detect and correct fatigue cracking in the forward engine mounts, which could result in reduced structural integrity of the airplane and could lead to in- flight loss of an engine, possibly resulting in reduced controllability of the airplane.
Notice of Information Collection
Document Number: 2015-30215
Type: Notice
Date: 2015-11-30
Agency: National Aeronautics and Space Administration, Agencies and Commissions
The National Aeronautics and Space Administration, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995 (Pub. L. 104-13, 44 U.S.C. 3506(c)(2)(A)). This is a request to reinstate OMB control number 2700-0092 with changes to include all NASA financial assistance awards, not just awards to commercial firms.
Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Shrimp Fishery of the Gulf of Mexico; Amendment 15
Document Number: 2015-30214
Type: Rule
Date: 2015-11-30
Agency: Department of Commerce, National Oceanic and Atmospheric Administration
NMFS issues regulations to implement Amendment 15 to the Fishery Management Plan for the Shrimp Fishery of the Gulf of Mexico (FMP), as prepared and submitted by the Gulf of Mexico (Gulf) Fishery Management Council (Council). This final rule revises the FMP framework procedures to streamline the process for changing certain regulations affecting the shrimp fishery. Additionally, Amendment 15 implements changes to the FMP that revise the maximum sustainable yield (MSY), overfishing threshold, and overfished threshold definitions and values for three species of penaeid shrimp. The purpose of this rule and Amendment 15 is to streamline the management process for Gulf shrimp stocks and to revise criteria for determining the overfished and overfishing status of each penaeid shrimp stock using the best available science.
Pipeline Safety: Notice of Gas Pipeline Advisory Committee Meeting
Document Number: 2015-30208
Type: Proposed Rule
Date: 2015-11-30
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
This document announces a public meeting of the Gas Pipeline Advisory Committee (GPAC). The committee will meet to consider and vote on the proposed rule, ``Pipeline Safety: Expanding the Use of Excess Flow Valves in Gas Distribution Systems to Applications Other Than Single-Family Residences'' published in the Federal Register on July 15, 2015.
Publication of a General License Related to the Foreign Narcotics Kingpin Sanctions Program
Document Number: 2015-30206
Type: Notice
Date: 2015-11-30
Agency: Department of the Treasury, Office of Foreign Assets Control
The Department of the Treasury's Office of Foreign Assets Control (OFAC) is publishing a general license issued in the Foreign Narcotics Kingpin sanctions program.
Notice of Intent To Grant a Buy America Waiver To the Illinois Department of Transportation for the Use of Sure Close Self-Closing Force Adjustable Gate Hinges
Document Number: 2015-30205
Type: Notice
Date: 2015-11-30
Agency: Federal Railroad Administration, Department of Transportation
FRA is issuing this notice to advise the public that it intends to grant the Illinois Department of Transportation (IDOT) a waiver from FRA's Buy America requirement for the use of 250 Sure Close gate hinges, which are manufactured in Italy. FRA believes a waiver is appropriate because, despite IDOT's best efforts to develop a domestic source for these hinges, domestically-produced gate hinges for pedestrian crossings meeting IDOT's safety specifications and schedule needs remain unavailable in the United States.
Proposed Establishment of Class E Airspace; Clinton, AR
Document Number: 2015-30188
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Clinton, AR. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures developed at Clinton Municipal Airport, for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Amendment of Class E Airspace for the Following New York Towns: Elmira, NY; Ithaca, NY; Poughkeepsie, NY
Document Number: 2015-30187
Type: Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class E Airspace at Elmira/Corning Regional Airport, Elmira, NY; Ithaca Tompkins Regional Airport, Ithaca, NY; and Duchess County Airport, Poughkeepsie, NY, by eliminating the Notice to Airmen (NOTAM) part time status of the Class E surface airspace designated as an extension at each airport. This action also updates the geographic coordinates of each airport to coincide with the FAA's database, and recognizes the airport name for Ithaca Tompkins Regional Airport. This is an administrative change to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace; West Dover, VT
Document Number: 2015-30184
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E Airspace at West Dover, VT as the Mt. Snow Non-Directional Beacon (NDB) has been decommissioned, requiring airspace redesign at Deerfield Valley Regional Airport. This action would enhance the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also would recognize the airport's name change.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-30182
Type: Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, CL-600-2D15 (Regional Jet Series 705) airplanes, CL-600-2D24 (Regional Jet Series 900) airplanes, and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD requires repetitive detailed inspections of the cage assembly, window louver panel assemblies (WLPAs), and blowout panels (BOPs), and corrective action if necessary. This AD was prompted by reports of several cases of damaged or detached decompression WLPAs and BOPs. We are issuing this AD to detect and correct damaged and detached WLPAs and BOPs. A detached WLPA or BOP could delay smoke detection in the cargo compartment, and in the event of a cargo compartment fire, this could lead to an uncontrolled cargo compartment fire.
Proximity Detection Systems for Mobile Machines in Underground Mines
Document Number: 2015-30181
Type: Proposed Rule
Date: 2015-11-30
Agency: Department of Labor, Mine Safety and Health Administration
In response to a request, the Mine Safety and Health Administration (MSHA) is extending the comment period on the Agency's proposed rule on Proximity Detection Systems for Mobile Machines in Underground Mines. This extension gives stakeholders additional time to evaluate the comments and testimony received thus far and provide meaningful input.
Intent To Prepare a Draft Table Rock Lake Shoreline Management Plan Report and Environmental Impact Statement To Investigate Potential Significant Impacts, Either Positive or Negative, to Table Rock Lakes' Authorized Purposes of Flood Risk Management, Hydropower, Water Supply, Recreation, and Fish and Wildlife
Document Number: 2015-30155
Type: Notice
Date: 2015-11-30
Agency: Department of Defense, Department of the Army, Corps of Engineers
The Environmental Impact Statement (EIS) is being prepared pursuant to the National Environmental Policy Act (NEPA), Council on Environmental Quality (CEQ) regulations (40 CFR, 1500-1517), and the USACE implementing regulation, Policy and Procedures for Implementing NEPA, Engineer Regulation (ER) 200-2-2 (1988). The study is being conducted in accordance with the requirements of 36 CFR 327.30, dated 27 July 1990 and ER 1130-2-406, dated 31 October 1990. The EIS will evaluate potential impacts (beneficial and adverse) to socioeconomic conditions, cultural and ecological resources, public access and safety, impacts to lake use, public parks and recreation, aesthetics, infrastructure, lake water quality, terrestrial and aquatic fish and wildlife habitats, federally-listed threatened and endangered species, and cumulative impacts associated with past, current, and reasonably foreseeable future actions at Table Rock Lake.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines
Document Number: 2015-30010
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Aviation Administration, Department of Transportation
The FAA is withdrawing a notice of proposed rulemaking (NPRM). The NPRM proposed a new airworthiness directive (AD) that had applied to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay 650-15 and Tay 651-54 turbofan engines. The proposed action would have required reducing the cyclic life limits for certain high-pressure turbine (HPT) disks. Accordingly, we withdraw the proposed rule.
Agency Information Collection Activities Under OMB Review; Renewal of a Currently Approved Information Collection
Document Number: 2015-29871
Type: Notice
Date: 2015-11-30
Agency: Department of the Interior, Bureau of Reclamation
The Bureau of Reclamation has forwarded the following Information Collection Request to the Office of Management and Budget (OMB) for review and approval: Diversions, Return Flows, and Consumptive Use of Colorado River Water in the Lower Colorado River Basin (OMB Control Number 1006-0015).
Total Loss-Absorbing Capacity, Long-Term Debt, and Clean Holding Company Requirements for Systemically Important U.S. Bank Holding Companies and Intermediate Holding Companies of Systemically Important Foreign Banking Organizations; Regulatory Capital Deduction for Investments in Certain Unsecured Debt of Systemically Important U.S. Bank Holding Companies
Document Number: 2015-29740
Type: Proposed Rule
Date: 2015-11-30
Agency: Federal Reserve System, Agencies and Commissions
The Board is inviting comment on a proposed rule to promote financial stability by improving the resolvability and resiliency of large, interconnected U.S. bank holding companies and the U.S. operations of large, interconnected foreign banking organizations pursuant to section 165 of the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act) and related deduction requirements for all banking organizations subject to the Board's capital rules. Under the proposed rule, a U.S. top-tier bank holding company identified by the Board as a global systemically important banking organization (covered BHC) would be required to maintain outstanding a minimum amount of loss-absorbing instruments, including a minimum amount of unsecured long-term debt, and related buffer. Similarly, the proposed rule would require the top-tier U.S. intermediate holding company of a global systemically important foreign banking organization with $50 billion or more in U.S. non-branch assets (covered IHC) to maintain outstanding a minimum amount of intra-group loss-absorbing instruments, including a minimum amount of unsecured long-term debt, and related buffer. The proposed rule would also impose restrictions on the other liabilities that a covered BHC or covered IHC may have outstanding. Finally, the proposed rule would require state member banks, bank holding companies, and savings and loan holding companies that are subject to the Board's capital rules to apply a regulatory capital deduction treatment to their investments in unsecured debt issued by covered BHCs.
Media Bureau Finalizes Reimbursement Form for Submission to OMB and Adopts Catalog of Expenses
Document Number: 2015-29483
Type: Rule
Date: 2015-11-30
Agency: Federal Communications Commission, Agencies and Commissions
In this document, the Media Bureau adopts the following a final catalog of expenses; a procedure whereby reimbursement payments will be disbursed via the agency's internal vendor payment system; a procedural requirement that the Reimbursement Form, with supporting cost documentation, must be submitted each time an entity makes a request for reimbursement from the Fund; and a decision that cost documentation, as well as the name, address, and other identifying information pertaining to vendors, will not be made publicly available.
Margin and Capital Requirements for Covered Swap Entities
Document Number: 2015-28671
Type: Rule
Date: 2015-11-30
Agency: Farm Credit Administration, Agencies and Commissions, Federal Deposit Insurance Corporation, Federal Reserve System, Office of the Comptroller of the Currency, Department of Treasury, Department of the Treasury, Federal Housing Finance Agency
The OCC, Board, FDIC, FCA, and FHFA (each an ``Agency'' and, collectively, the ``Agencies'') are adopting a joint rule to establish minimum margin and capital requirements for registered swap dealers, major swap participants, security-based swap dealers, and major security-based swap participants for which one of the Agencies is the prudential regulator. This final rule implements sections 731 and 764 of the Dodd-Frank Wall Street Reform and Consumer Protection Act, as amended by the Terrorism Risk Insurance Program Reauthorization Act of 2015 (``TRIPRA''). Sections 731 and 764 require the Agencies to adopt rules jointly to establish capital requirements and initial and variation margin requirements for such entities on all non-cleared swaps and non-cleared security-based swaps in order to offset the greater risk to such entities and the financial system arising from the use of swaps and security-based swaps that are not cleared.
Margin and Capital Requirements for Covered Swap Entities
Document Number: 2015-28670
Type: Rule
Date: 2015-11-30
Agency: Farm Credit Administration, Agencies and Commissions, Federal Deposit Insurance Corporation, Federal Reserve System, Office of the Comptroller of the Currency, Department of Treasury, Department of the Treasury, Federal Housing Finance Agency
The OCC, Board, FDIC, FCA, and FHFA (each an ``Agency'' and, collectively, the ``Agencies'') are adopting and invite comment on an interim final rule that will exempt certain non-cleared swaps and non- cleared security-based swaps with certain counterparties that qualify for an exception or exemption from clearing from the initial and variation margin requirements promulgated under sections 731 and 764 of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the ``Dodd-Frank Act'' or the ``Act''). This interim final rule implements Title III of the Terrorism Risk Insurance Program Reauthorization Act of 2015 (``TRIPRA''), which exempts from the Agencies' swap margin rules non-cleared swaps and non-cleared security-based swaps in which a counterparty qualifies for an exemption or exception from clearing under the Dodd-Frank Act. This interim final rule is a companion rule to the final rules adopted by the Agencies to implement section 731 and 764 of the Dodd-Frank Act.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.