Foreign-Trade Zone (FTZ) 45-Portland, Oregon; Notification of Proposed Production Activity; Lam Research Corporation; Subzone 45H; (Semiconductor Production Equipment, Subassemblies and Related Parts) Tualatin and Sherwood, Oregon, 72412-72414 [2015-29580]
Download as PDF
<![CDATA[
72412
Federal Register / Vol. 80, No. 223 / Thursday, November 19, 2015 / Notices
meeting is published less than 15 days
prior to the meeting because of the
exceptional circumstance of the
technological issues.
Dated: November 16, 2015.
David Mussatt,
Chief, Regional Programs Unit.
[FR Doc. 2015–29522 Filed 11–18–15; 8:45 am]
BILLING CODE 6335–01–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[S–125–2015]
Approval of Expansion of Subzone
77E; Cummins, Inc.; Memphis,
Tennessee
On August 28, 2015, the Executive
Secretary of the Foreign-Trade Zones
(FTZ) Board docketed an application
submitted by the City of Memphis,
grantee of FTZ 77, requesting to expand
Subzone 77E subject to the existing
activation limit of FTZ 77, on behalf of
Cummins, Inc. in Memphis, Tennessee.
The application was processed in
accordance with the FTZ Act and
Regulations, including notice in the
Federal Register inviting public
comment (80 FR 54520–54521,
September 10, 2015). The FTZ staff
examiner reviewed the application and
determined that it meets the criteria for
approval. Pursuant to the authority
delegated to the FTZ Board’s Executive
Secretary (15 CFR Sec. 400.36(f)), the
application to expand Subzone 77E is
approved, subject to the FTZ Act and
the Board’s regulations, including
Section 400.13, and further subject to
FTZ 77’s 2,000-acre activation limit.
Dated: November 13, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015–29581 Filed 11–18–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
mstockstill on DSK4VPTVN1PROD with NOTICES
[B–77–2015]
Foreign-Trade Zone 78—Nashville,
Tennessee; Application for Expansion
of Subzone 78A Nissan North America,
Inc. Smyrna, Tennessee
Smyrna, Tennessee. The application
was submitted pursuant to the
provisions of the Foreign-Trade Zones
Act, as amended (19 U.S.C. 81a–81u),
and the regulations of the FTZ Board (15
CFR part 400). It was formally docketed
on November 12, 2015.
Subzone 78A was approved on April
2, 1982 (Board Order 190, 47 FR 16191,
April 15, 1982) and expanded on March
18, 1993 (Board Order 632, 58 FR 18850,
March 30, 1993). The subzone currently
consists of two sites: Site 1 (1,004 acres)
located at 983 Nissan Drive, Smyrna;
and, Site 2 (958 acres) located at 520
Nissan Powertrain Drive, Decherd.
The applicant is requesting authority
to expand Site 1 of the subzone to
include 22 additional acres adjacent to
the present Site 1. No authorization for
additional production activity has been
requested at this time.
In accordance with the FTZ Board’s
regulations, Kathleen Boyce of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
December 29, 2015. Rebuttal comments
in response to material submitted
during the foregoing period may be
submitted during the subsequent 15-day
period to January 13, 2016.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Kathleen Boyce at Kathleen.Boyce@
trade.gov or (202) 482–1346.
Dated: November 12, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015–29481 Filed 11–18–15; 8:45 am]
BILLING CODE 3510–DS–P
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Metropolitan Government of
Nashville and Davidson County, grantee
of FTZ 78, requesting to expand
Subzone 78A—Site 1 at the facility of
Nissan North America, Inc., located in
VerDate Sep<11>2014
16:00 Nov 18, 2015
Jkt 238001
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–78–2015]
Foreign-Trade Zone (FTZ) 45—
Portland, Oregon; Notification of
Proposed Production Activity; Lam
Research Corporation; Subzone 45H;
(Semiconductor Production
Equipment, Subassemblies and
Related Parts) Tualatin and Sherwood,
Oregon
The Port of Portland, grantee of FTZ
45, submitted a notification of proposed
production activity to the FTZ Board on
behalf of Lam Research Corporation
(Lam), operator of Subzone 45H, at sites
in Tualatin and Sherwood, Oregon. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on November 6, 2015.
The facilities are used for the
production of semiconductor
production equipment, subassemblies
and related parts. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited
to the specific foreign-status materials
and components and specific finished
products described in the submitted
notification (as described below) and
subsequently authorized by the FTZ
Board.
Production under FTZ procedures
could exempt Lam from customs duty
payments on the foreign-status
components used in export production.
On its domestic sales, Lam would be
able to choose the duty rate during
customs entry procedures that applies to
semiconductor production equipment,
subassemblies and related parts (duty
free) for the foreign-status inputs noted
below. Customs duties also could
possibly be deferred or reduced on
foreign-status production equipment.
The components and materials
sourced from abroad include: Clean
room grease and lubricants; caulking
compounds; petroleum-based greases
and similar lubricants; polymer-based
adhesives; wafers and partial-wafers
principally of silicon or germanium
intended for testing purposes and not
for commercial production of semiconductors; PH buffer solutions and
litmus paper; fluorinated and other
polyether-based lubricants;
polyethylene tubes, pipes and hoses;
polypropylene tubing; PVC tubing;
plastic tubing; flexible tubes, pipes and
hoses of plastics; flexible plastic tubing
with/without fittings; plastic tube
fittings; foam tapes; scotch tapes,
packing tapes, and similar tapes;
electrical tapes; reflective tapes; plastic
labels; plastic signs and similar plates of
E:\FR\FM\19NON1.SGM
19NON1
mstockstill on DSK4VPTVN1PROD with NOTICES
Federal Register / Vol. 80, No. 223 / Thursday, November 19, 2015 / Notices
polymer plastics; polycarbonate
windows; shims of polyester plastics;
Teflon wraps and pads; protection and
insulation pads of polyurethane
plastics; wipes of polyurethane plastics;
plastic templates for facilities layout;
plastic film sheets and foam strips for
packaging; plastic boxes and crates;
reservoirs and tanks of plastics
principally in the form of
polypropylenes and fluoropolymers;
plastic caps; plastic packing materials;
plastic o-rings, gaskets, washers, seals,
and timing belts; plastic clips and
similar attaching devices; plastic tinting
lenses; plastic bushings; plastic hole
plugs; plastic screws, pins, and similar
fasteners; plastic brackets and mounts;
plastic wafer clamps; plastic parts not
otherwise identified in the HTSUS*;
unreinforced rubber tubing with fittings;
reinforced rubber tubing with/without
fittings; transmission belts; rubber
gaskets, washers and seals; rubber caps;
rubber sheets, grommets, bladders,
collars and parts not otherwise
identified in the HTSUS*; wooden
crates for packing; paper labels; gaskets,
washers and other seals of paper;
technical manuals, procedures, and
work instructions; certificates,
brochures, other work documents other
than manuals; duct tape; nonelectrical
components and accessories of graphite
and carbon fiber made predominantly in
the form of fiber plate disks or grafoil
liner ‘‘choke’’ rings*; porcelain or china
ceramic machinery components, rings,
disks, RF ‘‘window’’ disks, plates,
liners, shields, guards, end effectors,
plugs, screws, components and
accessories*; ceramic components,
rings, RF ‘‘window’’ disks, plates,
guards, end effectors, plugs, and
screws*; quartz reactor tubes; fused
silica and fused quartz components,
disks, windows, liners, rings, tubes,
holders, and funnels*; sapphire pins,
balls, shims, windows/viewports, liners,
tubes, components and accessories*;
steel pipes; cast steel fittings; stainless
flanges; stainless steel pipes- sleeves;
stainless steel pipes- elbows; stainless
steel, not cast, fittings for tubes and
pipes; other steel fittings; steel roller
chains; steel link chains; steel chain
links; steel screws- springs; steel socket
head screws; steel grub screws; steel
nuts; other threaded steel fasteners; steel
spring washers; iron or steel washers
other than spring washers; steel
retaining rings; steel fasteners without
threads; steel springs; steel gas springs,
wave springs, and plunger springs;
compression springs; belts and inserts of
steel wire; steel parts, bushings, collars,
blocks, rings, seals, and plates*; bus
bars, ground bars, and rods of copper;
VerDate Sep<11>2014
16:00 Nov 18, 2015
Jkt 238001
copper tubing; copper alloy for tubes
and pipes; copper washers; small brass
screws; copper threaded fittings; copper
parts, straps, anodes, sleeves, shields,
gaskets, pins, and screens*; nickel
screws, shims, orifices, washers, straps,
anodes, sleeves, shields, gaskets, pins,
springs, nuts, and screens; nameplates;
rods and rails of aluminum; aluminum
tubing; aluminum alloy tubing;
aluminum fittings for tubes and pipes;
aluminum screws; aluminum fasteners;
aluminum covers, spinners, sleeves and
screens*; zinc fittings, screws, fasteners,
and backshells; titanium pins, screws,
washers, bolts, nuts, inserts, and plates;
saw blades; pliers; knockout punches
and hose cutters; hand-operated
adjustable-flat spanners and torque
wrenches; hand-operated adjustable
spanners and wrenches—other; socket
wrenches; drills; screwdrivers; other
hand tools, extraction tools, debar tools,
and epoxy removal tips, and install
tools; grease guns; metal clamps;
manual drills; drill bits; padlocks; locks
other than padlocks; keys; hinges and
parts; casters; metal fittings of a type for
buildings; metal fittings of a type for
furniture; iron/steel/aluminum/zinc
mountings, fittings, straps, clamps,
brackets, levelers, struts and valves;
base metal brackets; braided steel tubing
and hoses; braided metal tubing; air
cylinders and other pneumatic power
engines; pneumatic power engines other
than linear acting; shock absorbers;
parts for pneumatic engines; diaphragm
pumps for liquids and gases; centrifugal
pumps for liquids and gases; syringe
and other pumps; parts of centrifugal
pumps; vacuum pumps; fans; parts of
fans- metal wires, pump actuators; heat
exchange units; evaporators for use in
semi-conductor manufacturing
equipment; heaters for use in semiconductor manufacturing equipment;
parts of heat exchange units; parts of
heaters; water filters; liquid filtration
devices; air and other gas filtration
devices; filter parts; chemical
applicators; nozzles and orifices; lift and
handling fixtures; housing bearings and
plain shaft bearings; computer laptops;
computers; keyboards and computer
peripherals; hard disk drives and optical
drives; hubs; interface and input/output
cards and similar interface articles;
‘‘dongles’’: Peripheral pieces of
hardware intended to interface with a
computer to enable additional functions
such as copy protection or
authentication; optical readers; printed
circuit assemblies; teaching pendants
and terminals; valves (pressure
reducing, air flow control, check valves,
safety, solenoid, liquid control, electric,
pneumatic, bellows, butterfly, ball and
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
72413
vacuum); other manual valves of steel;
vacuum and other manual valves of
fluorocarbons, polyethers, and
polyvinyl chloride; valve parts; bearings
(ball, roller, bearing rings, transmission
shaft, roller, housing, and plain shaft);
fixed, multiple and variable ration
speed changers, ball or roller screws;
pulleys; shaft couplings; gear parts
made of steel; mechanical gaskets;
mechanical seals; gaskets sets; machines
for the production of semiconductors;
tools and process modules for chemical
vapor deposition/physical vapor
deposition/plasma dry etch/stripping of
photo resist/ultraviolet thermal
processing/wafer cleaning for semiconductor production; conductor
material deposition process modules
and machines for wafer packaging;
transport modules; wafer transport
robots; baffles, bellows, bezels, wafer
chucks and related parts designed
specifically for semiconductor
manufacturing equipment; complex
elements in the form of tubing for
distribution of gases and fluids and
pneumatic harnesses, designed
specifically for semiconductor
manufacturing equipment; radio
frequency and high frequency electrodes
and related parts; drive units for process
modules gap management; structural
elements designed specifically for
semiconductor manufacturing
equipment and transport modules; fluid
and gas distribution modules and
assemblies and structural parts and
components designed for these
modules; printed circuit board
assemblies and control assemblies for
system management or signal interface
and distribution; metal and plastic
(including silicon) parts designed for
semiconductor manufacturing
equipment and transport modules;
plasma sources for semiconductor
manufacturing equipment; silicon rings;
radio frequency and high frequency
coils and electrodes and related parts
designed specifically for semiconductor
manufacturing equipment for plasma
generation; radio frequency generators
and related structural components
designed specifically for semiconductor
manufacturing equipment; radio
frequency matching networks and
related structural; metal and plastic
(including silicon) parts designed for
semiconductor transport equipment;
fluid management tanks; mechanical
brakes; electric motors; universal AC/DC
motors; lamp ballasts; electrical
transformers; power suppliers; static
converters; inductors; parts of power
supplies; magnets; magnetic brakes;
manganese dioxide batteries; lithium
batteries; portable electric lamps;
E:\FR\FM\19NON1.SGM
19NON1
mstockstill on DSK4VPTVN1PROD with NOTICES
72414
Federal Register / Vol. 80, No. 223 / Thursday, November 19, 2015 / Notices
resistive heating elements; network
equipment; training videos on tape;
unrecorded magnetic media; software
on CD–ROM or similar optical storage
units; video cameras; LCD computer;
general use motors; LED indicators;
electric sound or visual signaling
apparatus; tantalum fixed capacitors;
single layer ceramic dielectric fixed
capacitors; multi-layer ceramic
dielectric fixed capacitors; fixed
electrical capacitors; variable or
adjustable capacitors; composition or
film type fixed carbon resistors and
attenuators; other resistors; other fixed
carbon resistors and attenuators;
potentiometers; electrical variable
resistors other than other
potentiometers; raw circuit boards; ion
bars; fuses made of glass and other
materials with both high and low amps;
circuit breakers; electromechanical
relays; switches; lamp holders and
contactors; terminals and connectors;
connectors—assemblies, converters,
receptacle panels, interlock converters,
electrical ducts and lock-outs; electrical
terminals and terminal blocks; conduit
assemblies, backshells, buses, and
similar connectors; control apparatusassemblies, couplers, cards, valve cards,
drivers, load ports, terminal boards,
programmable controllers, and motion
controllers; connector sockets; tungsten
lamps; fluorescent lamps; arc lamps;
ultra violet lamps; parts of electrical
filament or discharge lamps; magnetrons
and magnetron tubes; diodes;
transistors; LED lamps, oscillators,
photo sensors and fiber optic sensors;
processor and logic controller integrated
circuits; memory cards; integrated
circuit amplifiers; other non-processor,
non-memory integrated circuits;
equipment for performing electrolysis;
insulated electrical cable wire; coax
cables; USB, ethernet, and similar cables
with connectors; cables with
connectors; insulated wire cable
without connectors; fiber optic cables;
ceramic insulators; electrical insulators;
insulating fittings—ceramic; insulating
fittings of plastic; quartz rings; electric
filter devices; dollies; optic fibers;
optical lenses and mirrors; optical filters
and windows; mounted windows and
lenses; prisms; flat panel displays;
optical amplifiers; non-electric levels;
calipers and linear gauges; hand
instruments for measuring length; linear
gauge clamps and heads; caliper clamps
and heads; face shields with respirators;
electrical temperature, thermocouples
and temperature gauges; flow meters,
level gauges and similar fluid
measurement equipment; electrical
pressure checking and measurement
equipment; mechanical pressure
VerDate Sep<11>2014
16:00 Nov 18, 2015
Jkt 238001
checking and measurement equipment;
leak sensors; interferometers and
hydrogen sensors; gas analysis systems;
spectrometers; optical temperature
sensors; PH analysis sensors,
controllers, probes and complete
systems; parts of gas analysis systems;
speedometers and tachometers; power
analyzers principally in the form of
voltage detectors, probes, monitors and
measurement cards; test fixtures and
similar electrical analysis systems;
wafer measurement equipment; leak
detectors; parts of equipment used for
checking electrical quantities;
equipment for inspecting semiconductor
wafers; optical inspection equipment;
measuring equipment associated with
semiconductor production; panels,
frames, boards, blocks, doors, jigs,
shafts, sides, and structural bases for
test fixtures and electrical analysis
systems; automatic thermostats and
temperature control equipment;
automatic manostats; vapor on demand
injectors; process control equipment,
(temperature controllers, pressure
controllers, liquid controllers, mass flow
controllers, pump controllers, and
similar process control equipment);
temperature controller parts; time
switches, time relays and other timers;
carts and racks for servers; and brushes
(duty rates range from free to 10.7%).
(*See Lam’s production notification for
additional descriptions of these
products.)
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
December 29, 2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov or
(202) 482–1367.
Dated: November 13, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015–29580 Filed 11–18–15; 8:45 am]
BILLING CODE 3510–DS–P
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XE324
Mid-Atlantic Fishery Management
Council (MAFMC); Public Meeting
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice of a public meeting.
AGENCY:
The Mid-Atlantic Fishery
Management Council (Council) will
hold a four-day meeting.
DATES: The meeting will be held on
Monday, Tuesday, Wednesday, and
Thursday, December 7–10, 2015,
starting at 9:30 a.m. on Monday, 8:30
a.m. on Tuesday, 9 a.m. on Wednesday,
and 8 a.m. on Thursday.
ADDRESSES: On Monday, December 7,
the meeting will be held at O’Callaghan
Hotel, 174 West Street, Annapolis, MD
21401; telephone: (410) 263–7700 and
on Tuesday, Wednesday, and Thursday,
December 8–10 at the Westin
Annapolis, 100 Westgate Circle,
Annapolis, MD 21401; telephone: (410)
972–4300.
Council address: Mid-Atlantic Fishery
Management Council, 800 N. State
Street, Suite 201, Dover, DE 19901;
telephone: (302) 674–2331 or on their
Web site at www.mafmc.org.
FOR FURTHER INFORMATION CONTACT:
Christopher M. Moore, Ph.D., Executive
Director, Mid-Atlantic Fishery
Management Council; telephone: (302)
526–5255.
SUPPLEMENTARY INFORMATION:
SUMMARY:
Agenda
Monday, December 7, 2015
In the morning session the Executive
Committee will meet in closed session
to review nominees for the Ricks E
Savage Award and other awards. The
Council will review and approve the
Comprehensive 5-year Research Priority
Plan. The Council will also review and
approve policies regarding non-fishing
activities that impact fish habitat.
During the afternoon session, Golden
Tilefish Framework 2 will be discussed.
The Council will review the public
hearing document for Blueline Tilefish.
The Council will review the findings
from the Scientific and Statistical
Committee and adjust specification
recommendations for Spiny Dogfish
Committee Meeting as a committee of
the whole.
E:\FR\FM\19NON1.SGM
19NON1
]]>Agencies
[Federal Register Volume 80, Number 223 (Thursday, November 19, 2015)]
[Notices]
[Pages 72412-72414]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-29580]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-78-2015]
Foreign-Trade Zone (FTZ) 45--Portland, Oregon; Notification of
Proposed Production Activity; Lam Research Corporation; Subzone 45H;
(Semiconductor Production Equipment, Subassemblies and Related Parts)
Tualatin and Sherwood, Oregon
The Port of Portland, grantee of FTZ 45, submitted a notification
of proposed production activity to the FTZ Board on behalf of Lam
Research Corporation (Lam), operator of Subzone 45H, at sites in
Tualatin and Sherwood, Oregon. The notification conforming to the
requirements of the regulations of the FTZ Board (15 CFR 400.22) was
received on November 6, 2015.
The facilities are used for the production of semiconductor
production equipment, subassemblies and related parts. Pursuant to 15
CFR 400.14(b), FTZ activity would be limited to the specific foreign-
status materials and components and specific finished products
described in the submitted notification (as described below) and
subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt Lam from customs duty
payments on the foreign-status components used in export production. On
its domestic sales, Lam would be able to choose the duty rate during
customs entry procedures that applies to semiconductor production
equipment, subassemblies and related parts (duty free) for the foreign-
status inputs noted below. Customs duties also could possibly be
deferred or reduced on foreign-status production equipment.
The components and materials sourced from abroad include: Clean
room grease and lubricants; caulking compounds; petroleum-based greases
and similar lubricants; polymer-based adhesives; wafers and partial-
wafers principally of silicon or germanium intended for testing
purposes and not for commercial production of semi-conductors; PH
buffer solutions and litmus paper; fluorinated and other polyether-
based lubricants; polyethylene tubes, pipes and hoses; polypropylene
tubing; PVC tubing; plastic tubing; flexible tubes, pipes and hoses of
plastics; flexible plastic tubing with/without fittings; plastic tube
fittings; foam tapes; scotch tapes, packing tapes, and similar tapes;
electrical tapes; reflective tapes; plastic labels; plastic signs and
similar plates of
[[Page 72413]]
polymer plastics; polycarbonate windows; shims of polyester plastics;
Teflon wraps and pads; protection and insulation pads of polyurethane
plastics; wipes of polyurethane plastics; plastic templates for
facilities layout; plastic film sheets and foam strips for packaging;
plastic boxes and crates; reservoirs and tanks of plastics principally
in the form of polypropylenes and fluoropolymers; plastic caps; plastic
packing materials; plastic o-rings, gaskets, washers, seals, and timing
belts; plastic clips and similar attaching devices; plastic tinting
lenses; plastic bushings; plastic hole plugs; plastic screws, pins, and
similar fasteners; plastic brackets and mounts; plastic wafer clamps;
plastic parts not otherwise identified in the HTSUS*; unreinforced
rubber tubing with fittings; reinforced rubber tubing with/without
fittings; transmission belts; rubber gaskets, washers and seals; rubber
caps; rubber sheets, grommets, bladders, collars and parts not
otherwise identified in the HTSUS*; wooden crates for packing; paper
labels; gaskets, washers and other seals of paper; technical manuals,
procedures, and work instructions; certificates, brochures, other work
documents other than manuals; duct tape; nonelectrical components and
accessories of graphite and carbon fiber made predominantly in the form
of fiber plate disks or grafoil liner ``choke'' rings*; porcelain or
china ceramic machinery components, rings, disks, RF ``window'' disks,
plates, liners, shields, guards, end effectors, plugs, screws,
components and accessories*; ceramic components, rings, RF ``window''
disks, plates, guards, end effectors, plugs, and screws*; quartz
reactor tubes; fused silica and fused quartz components, disks,
windows, liners, rings, tubes, holders, and funnels*; sapphire pins,
balls, shims, windows/viewports, liners, tubes, components and
accessories*; steel pipes; cast steel fittings; stainless flanges;
stainless steel pipes- sleeves; stainless steel pipes- elbows;
stainless steel, not cast, fittings for tubes and pipes; other steel
fittings; steel roller chains; steel link chains; steel chain links;
steel screws- springs; steel socket head screws; steel grub screws;
steel nuts; other threaded steel fasteners; steel spring washers; iron
or steel washers other than spring washers; steel retaining rings;
steel fasteners without threads; steel springs; steel gas springs, wave
springs, and plunger springs; compression springs; belts and inserts of
steel wire; steel parts, bushings, collars, blocks, rings, seals, and
plates*; bus bars, ground bars, and rods of copper; copper tubing;
copper alloy for tubes and pipes; copper washers; small brass screws;
copper threaded fittings; copper parts, straps, anodes, sleeves,
shields, gaskets, pins, and screens*; nickel screws, shims, orifices,
washers, straps, anodes, sleeves, shields, gaskets, pins, springs,
nuts, and screens; nameplates; rods and rails of aluminum; aluminum
tubing; aluminum alloy tubing; aluminum fittings for tubes and pipes;
aluminum screws; aluminum fasteners; aluminum covers, spinners, sleeves
and screens*; zinc fittings, screws, fasteners, and backshells;
titanium pins, screws, washers, bolts, nuts, inserts, and plates; saw
blades; pliers; knockout punches and hose cutters; hand-operated
adjustable-flat spanners and torque wrenches; hand-operated adjustable
spanners and wrenches--other; socket wrenches; drills; screwdrivers;
other hand tools, extraction tools, debar tools, and epoxy removal
tips, and install tools; grease guns; metal clamps; manual drills;
drill bits; padlocks; locks other than padlocks; keys; hinges and
parts; casters; metal fittings of a type for buildings; metal fittings
of a type for furniture; iron/steel/aluminum/zinc mountings, fittings,
straps, clamps, brackets, levelers, struts and valves; base metal
brackets; braided steel tubing and hoses; braided metal tubing; air
cylinders and other pneumatic power engines; pneumatic power engines
other than linear acting; shock absorbers; parts for pneumatic engines;
diaphragm pumps for liquids and gases; centrifugal pumps for liquids
and gases; syringe and other pumps; parts of centrifugal pumps; vacuum
pumps; fans; parts of fans- metal wires, pump actuators; heat exchange
units; evaporators for use in semi-conductor manufacturing equipment;
heaters for use in semi-conductor manufacturing equipment; parts of
heat exchange units; parts of heaters; water filters; liquid filtration
devices; air and other gas filtration devices; filter parts; chemical
applicators; nozzles and orifices; lift and handling fixtures; housing
bearings and plain shaft bearings; computer laptops; computers;
keyboards and computer peripherals; hard disk drives and optical
drives; hubs; interface and input/output cards and similar interface
articles; ``dongles'': Peripheral pieces of hardware intended to
interface with a computer to enable additional functions such as copy
protection or authentication; optical readers; printed circuit
assemblies; teaching pendants and terminals; valves (pressure reducing,
air flow control, check valves, safety, solenoid, liquid control,
electric, pneumatic, bellows, butterfly, ball and vacuum); other manual
valves of steel; vacuum and other manual valves of fluorocarbons,
polyethers, and polyvinyl chloride; valve parts; bearings (ball,
roller, bearing rings, transmission shaft, roller, housing, and plain
shaft); fixed, multiple and variable ration speed changers, ball or
roller screws; pulleys; shaft couplings; gear parts made of steel;
mechanical gaskets; mechanical seals; gaskets sets; machines for the
production of semiconductors; tools and process modules for chemical
vapor deposition/physical vapor deposition/plasma dry etch/stripping of
photo resist/ultraviolet thermal processing/wafer cleaning for semi-
conductor production; conductor material deposition process modules and
machines for wafer packaging; transport modules; wafer transport
robots; baffles, bellows, bezels, wafer chucks and related parts
designed specifically for semiconductor manufacturing equipment;
complex elements in the form of tubing for distribution of gases and
fluids and pneumatic harnesses, designed specifically for semiconductor
manufacturing equipment; radio frequency and high frequency electrodes
and related parts; drive units for process modules gap management;
structural elements designed specifically for semiconductor
manufacturing equipment and transport modules; fluid and gas
distribution modules and assemblies and structural parts and components
designed for these modules; printed circuit board assemblies and
control assemblies for system management or signal interface and
distribution; metal and plastic (including silicon) parts designed for
semiconductor manufacturing equipment and transport modules; plasma
sources for semiconductor manufacturing equipment; silicon rings; radio
frequency and high frequency coils and electrodes and related parts
designed specifically for semiconductor manufacturing equipment for
plasma generation; radio frequency generators and related structural
components designed specifically for semiconductor manufacturing
equipment; radio frequency matching networks and related structural;
metal and plastic (including silicon) parts designed for semiconductor
transport equipment; fluid management tanks; mechanical brakes;
electric motors; universal AC/DC motors; lamp ballasts; electrical
transformers; power suppliers; static converters; inductors; parts of
power supplies; magnets; magnetic brakes; manganese dioxide batteries;
lithium batteries; portable electric lamps;
[[Page 72414]]
resistive heating elements; network equipment; training videos on tape;
unrecorded magnetic media; software on CD-ROM or similar optical
storage units; video cameras; LCD computer; general use motors; LED
indicators; electric sound or visual signaling apparatus; tantalum
fixed capacitors; single layer ceramic dielectric fixed capacitors;
multi-layer ceramic dielectric fixed capacitors; fixed electrical
capacitors; variable or adjustable capacitors; composition or film type
fixed carbon resistors and attenuators; other resistors; other fixed
carbon resistors and attenuators; potentiometers; electrical variable
resistors other than other potentiometers; raw circuit boards; ion
bars; fuses made of glass and other materials with both high and low
amps; circuit breakers; electromechanical relays; switches; lamp
holders and contactors; terminals and connectors; connectors--
assemblies, converters, receptacle panels, interlock converters,
electrical ducts and lock-outs; electrical terminals and terminal
blocks; conduit assemblies, backshells, buses, and similar connectors;
control apparatus- assemblies, couplers, cards, valve cards, drivers,
load ports, terminal boards, programmable controllers, and motion
controllers; connector sockets; tungsten lamps; fluorescent lamps; arc
lamps; ultra violet lamps; parts of electrical filament or discharge
lamps; magnetrons and magnetron tubes; diodes; transistors; LED lamps,
oscillators, photo sensors and fiber optic sensors; processor and logic
controller integrated circuits; memory cards; integrated circuit
amplifiers; other non-processor, non-memory integrated circuits;
equipment for performing electrolysis; insulated electrical cable wire;
coax cables; USB, ethernet, and similar cables with connectors; cables
with connectors; insulated wire cable without connectors; fiber optic
cables; ceramic insulators; electrical insulators; insulating
fittings--ceramic; insulating fittings of plastic; quartz rings;
electric filter devices; dollies; optic fibers; optical lenses and
mirrors; optical filters and windows; mounted windows and lenses;
prisms; flat panel displays; optical amplifiers; non-electric levels;
calipers and linear gauges; hand instruments for measuring length;
linear gauge clamps and heads; caliper clamps and heads; face shields
with respirators; electrical temperature, thermocouples and temperature
gauges; flow meters, level gauges and similar fluid measurement
equipment; electrical pressure checking and measurement equipment;
mechanical pressure checking and measurement equipment; leak sensors;
interferometers and hydrogen sensors; gas analysis systems;
spectrometers; optical temperature sensors; PH analysis sensors,
controllers, probes and complete systems; parts of gas analysis
systems; speedometers and tachometers; power analyzers principally in
the form of voltage detectors, probes, monitors and measurement cards;
test fixtures and similar electrical analysis systems; wafer
measurement equipment; leak detectors; parts of equipment used for
checking electrical quantities; equipment for inspecting semiconductor
wafers; optical inspection equipment; measuring equipment associated
with semiconductor production; panels, frames, boards, blocks, doors,
jigs, shafts, sides, and structural bases for test fixtures and
electrical analysis systems; automatic thermostats and temperature
control equipment; automatic manostats; vapor on demand injectors;
process control equipment, (temperature controllers, pressure
controllers, liquid controllers, mass flow controllers, pump
controllers, and similar process control equipment); temperature
controller parts; time switches, time relays and other timers; carts
and racks for servers; and brushes (duty rates range from free to
10.7%). (*See Lam's production notification for additional descriptions
of these products.)
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is December 29,
2015.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Diane Finver at
Diane.Finver@trade.gov or (202) 482-1367.
Dated: November 13, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015-29580 Filed 11-18-15; 8:45 am]
BILLING CODE 3510-DS-P
