Foreign-Trade Zone (FTZ) 39-Dallas/Fort Worth, Texas; Notification of Proposed Production Activity, KONE, Inc. (Elevator Parts), Allen, Texas, 68836 [2015-28341]

Download as PDF 68836 Federal Register / Vol. 80, No. 215 / Friday, November 6, 2015 / Notices LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE— Continued [10/7/2015 through 10/22/2015 (amended)] Firm name Firm address Hastings Irrigation Pipe Co .... 1801 East South Street, Hastings, ND 68901. 2001 N. 17th Avenue, Melrose Park, IL 60160. Automation Systems, LLC ..... Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 71030, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the requirements set forth in EDA’s regulations at 13 CFR 315.9 for procedures to request a public hearing. The Catalog of Federal Domestic Assistance official number and title for the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance for Firms. Dated: November 2, 2015. Miriam Kearse, Lead Program Analyst. [FR Doc. 2015–28321 Filed 11–5–15; 8:45 am] BILLING CODE 3510–WH–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–70–2015] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone (FTZ) 39—Dallas/ Fort Worth, Texas; Notification of Proposed Production Activity, KONE, Inc. (Elevator Parts), Allen, Texas KONE, Inc. (KONE) submitted a notification of proposed production activity to the FTZ Board for its facility in Allen, Texas. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on October 29, 2015. The KONE facility is located within Site 21 of FTZ 39. The facility is used for the research, testing and manufacturing of elevator logic control enclosure electrification panels and pick-and-pack elevator part kits. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as VerDate Sep<11>2014 17:21 Nov 05, 2015 Jkt 238001 Date accepted for investigation Product(s) 10/22/2015 The firm manufactures alumimun pipe. 10/22/2015 The firm manufactures bolt, screw, and washer assembled components for the automotive and commercial markets. described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt KONE from customs duty payments on the foreign status components used in export production. On its domestic sales, KONE would be able to choose the duty rates during customs entry procedures that apply to elevator logic control enclosure electrification panels and pick-and-pack elevator part kits (duty rate ranges from duty-free to 2.7%) for the foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Adhesives; plastic rods; plastic tubes; plastic bushings; self-adhesive plastic electrical tape; plastic bumper strips in rolls; plastic guides and covers; plastic cover seals; plastic gaskets; plastic insulation; rubber gaskets; rubber pads; rubber isolation parts; paper film displays; paper labels; paper drilling templates; printed product information; galvanized steel sheets; galvanized steel wire; stainless steel sheets; steel profile parts; steel sheet piling; steel tubes; threaded steel elbows; threaded steel fittings; steel pipe fittings; steel chains; steel anchors; steel screws, bolts and nuts; steel spacer studs; steel lock washers; steel washers; steel rivets; steel cotter pins; steel mesh; steel rods; steel brackets; steel cabinets; copper plates; copper screws; copper nuts; copper springs; aluminum spacers; metal cabinet locks; lock parts (latch cam); base metal hinges for metal cabinets; base metal brackets, covers and handles for metal cabinets; base metal conduits and plates; sensors meant for weighing; circuit board parts; gearless motor stub shafts; bushings; roller screws; shaft couplings; clutches; electric motors; electric motor parts; electrical transformers; static converters; power inducers; electrical transformer parts; magnets; electromagnetic braking units; emergency intercoms; adapter modules; intercom/telephone parts; speakers; computerized voice recorders; printed circuit parts; pilot alarms; light PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 indicator panels; pilot lights for printed circuits; resistor assemblies; resistor parts; fuses; automatic circuit breakers; resistor capacitor unit protectors; relay units; circuit breakers; electronic seismic switches; switches; electrical connectors; electrical couplings; main controller CPU with printed circuit boards; electrical boards; box back panels; electronic integrated circuit parts; electrical encoders; electric conductors; LED display counters; and, LED speed-direction indicators (duty rate ranges from duty-free to 12.5%). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is December 16, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: October 30, 2015. Elizabeth Whiteman, Acting Executive Secretary. [FR Doc. 2015–28341 Filed 11–5–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–851] Certain Preserved Mushrooms From the People’s Republic of China: Preliminary Results of Antidumping Duty Administrative Review, and Rescission in Part; 2014/2015 Enforcement and Compliance, International Trade Administration, Department of Commerce. AGENCY: E:\FR\FM\06NON1.SGM 06NON1

Agencies

[Federal Register Volume 80, Number 215 (Friday, November 6, 2015)]
[Notices]
[Page 68836]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-28341]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-70-2015]


Foreign-Trade Zone (FTZ) 39--Dallas/Fort Worth, Texas; 
Notification of Proposed Production Activity, KONE, Inc. (Elevator 
Parts), Allen, Texas

    KONE, Inc. (KONE) submitted a notification of proposed production 
activity to the FTZ Board for its facility in Allen, Texas. The 
notification conforming to the requirements of the regulations of the 
FTZ Board (15 CFR 400.22) was received on October 29, 2015.
    The KONE facility is located within Site 21 of FTZ 39. The facility 
is used for the research, testing and manufacturing of elevator logic 
control enclosure electrification panels and pick-and-pack elevator 
part kits. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited 
to the specific foreign-status materials and components and specific 
finished products described in the submitted notification (as described 
below) and subsequently authorized by the FTZ Board.
    Production under FTZ procedures could exempt KONE from customs duty 
payments on the foreign status components used in export production. On 
its domestic sales, KONE would be able to choose the duty rates during 
customs entry procedures that apply to elevator logic control enclosure 
electrification panels and pick-and-pack elevator part kits (duty rate 
ranges from duty-free to 2.7%) for the foreign status inputs noted 
below. Customs duties also could possibly be deferred or reduced on 
foreign status production equipment.
    The components and materials sourced from abroad include: 
Adhesives; plastic rods; plastic tubes; plastic bushings; self-adhesive 
plastic electrical tape; plastic bumper strips in rolls; plastic guides 
and covers; plastic cover seals; plastic gaskets; plastic insulation; 
rubber gaskets; rubber pads; rubber isolation parts; paper film 
displays; paper labels; paper drilling templates; printed product 
information; galvanized steel sheets; galvanized steel wire; stainless 
steel sheets; steel profile parts; steel sheet piling; steel tubes; 
threaded steel elbows; threaded steel fittings; steel pipe fittings; 
steel chains; steel anchors; steel screws, bolts and nuts; steel spacer 
studs; steel lock washers; steel washers; steel rivets; steel cotter 
pins; steel mesh; steel rods; steel brackets; steel cabinets; copper 
plates; copper screws; copper nuts; copper springs; aluminum spacers; 
metal cabinet locks; lock parts (latch cam); base metal hinges for 
metal cabinets; base metal brackets, covers and handles for metal 
cabinets; base metal conduits and plates; sensors meant for weighing; 
circuit board parts; gearless motor stub shafts; bushings; roller 
screws; shaft couplings; clutches; electric motors; electric motor 
parts; electrical transformers; static converters; power inducers; 
electrical transformer parts; magnets; electromagnetic braking units; 
emergency intercoms; adapter modules; intercom/telephone parts; 
speakers; computerized voice recorders; printed circuit parts; pilot 
alarms; light indicator panels; pilot lights for printed circuits; 
resistor assemblies; resistor parts; fuses; automatic circuit breakers; 
resistor capacitor unit protectors; relay units; circuit breakers; 
electronic seismic switches; switches; electrical connectors; 
electrical couplings; main controller CPU with printed circuit boards; 
electrical boards; box back panels; electronic integrated circuit 
parts; electrical encoders; electric conductors; LED display counters; 
and, LED speed-direction indicators (duty rate ranges from duty-free to 
12.5%).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary at the address 
below. The closing period for their receipt is December 16, 2015.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
Board's Web site, which is accessible via www.trade.gov/ftz.
    For further information, contact Elizabeth Whiteman at 
Elizabeth.Whiteman@trade.gov or (202) 482-0473.

    Dated: October 30, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015-28341 Filed 11-5-15; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.