Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 68835-68836 [2015-28321]

Download as PDF Federal Register / Vol. 80, No. 215 / Friday, November 6, 2015 / Notices links. Records generated from this meeting may also be inspected and reproduced at the Rocky Mountain Regional Office, as they become available, both before and after the meeting. Persons interested in the work of this advisory committee are advised to go to the Commission’s Web site, www.usccr.gov, or to contact the Rocky Mountain Regional Office at the above phone number, email or street address. Agenda: Welcome and Introductions Norma Bixby, Chair Discussion of Specific Issues to Consider, Presenters and Setting the Briefing Agenda Montana State Advisory Committee Administrative Matters Malee V. Craft, Regional Director and Designated Federal Official (DFO) DATES: Tuesday, November 17, 2015, at 1:00 p.m. (MDT). ADDRESSES: To be held via teleconference: Conference Call Toll-Free Number: 1– 888–329–8862, Conference ID: 3946131. TDD: Dial Federal Relay Service 1– 800–977–8339 and give the operator the above conference call number and conference ID. FOR FURTHER INFORMATION CONTACT: Malee V. Craft, Regional Director, mcraft@usccr.gov, 303–866–1040. Dated: November 2, 2015. David Mussatt, Chief, Regional Programs Unit. [FR Doc. 2015–28296 Filed 11–5–15; 8:45 am] BILLING CODE 6335–01–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of National Advisory Council on Innovation and Entrepreneurship Meeting Economic Development Administration. ACTION: Notice of an open meeting. AGENCY: The National Advisory Council on Innovation and Entrepreneurship (NACIE) will hold a SUMMARY: public meeting on Thursday, December 3, 2015, 2:00–3:30 p.m. Eastern Time (ET) and Friday, December 4, 2015, 8:45 a.m.–12:00 p.m. ET. During this time, members will continue to work on various Council initiatives which include: innovation, entrepreneurship and workforce talent. DATES: Thursday, December 3, 2015 Time: 2:00–3:30 p.m. ET Friday, December 4, 2015 Time: 8:45 a.m.–12:00 p.m. ET ADDRESSES: Google, Inc., 25 Massachusetts Ave NW., #900, Washington, DC 20001. Teleconference: December 3–4, 2015 Dial-In: 1–800–369–1986 Passcode: 3758910 SUPPLEMENTARY INFORMATION: The Council was chartered on November 10, 2009 to advise the Secretary of Commerce on matters related to innovation and entrepreneurship in the United States. NACIE’s overarching focus is recommending transformational policies to the Secretary that will help U.S. communities, businesses, and the workforce become more globally competitive. The Council operates as an independent entity within the Office of Innovation and Entrepreneurship (OIE), which is housed within the U.S. Commerce Department’s Economic Development Administration. NACIE members are a diverse and dynamic group of successful entrepreneurs, innovators, and investors, as well as leaders from nonprofit organizations and academia. The purpose of this meeting is to discuss the Council’s planned work initiatives in three focus areas: Workforce/talent, entrepreneurship, and innovation. The final agenda will be posted on the NACIE Web site at https://www.eda.gov/oie/nacie/ prior to the meeting. Any member of the public may submit pertinent questions and comments concerning the Council’s affairs at any time before or after the meeting. Comments may be submitted to the Office of Innovation and Entrepreneurship at the contact information below. Those unable to 68835 attend the meetings in person but wishing to listen to the proceedings can do so through a conference call line: 1– 800–369–1986, passcode: 3758910 for both meeting days on December 3rd and December 4th. Copies of the meeting minutes will be available by request within 90 days of the meeting date. FOR FURTHER INFORMATION CONTACT: Julie Lenzer, Director, Office of Innovation and Entrepreneurship, Room 78018, 1401 Constitution Avenue NW., Washington, DC 20230; email: NACIE@ doc.gov; telephone: 202–482–8001; fax: 202–273–4781. Please reference ‘‘NACIE December 3rd–4th Meeting’’ in the subject line of your correspondence. Dated: November 2, 2015. Julie Lenzer, Director, Office of Innovation and Entrepreneurship. [FR Doc. 2015–28320 Filed 11–5–15; 8:45 am] BILLING CODE 3510–WH–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance Economic Development Administration, Department of Commerce. ACTION: Notice and opportunity for public comment. AGENCY: Pursuant to Section 251 of the Trade Act 1974, as amended (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. Accordingly, EDA has initiated investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each of these firms contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE mstockstill on DSK4VPTVN1PROD with NOTICES [10/7/2015 through 10/22/2015 (amended)] Firm name Firm address Bliley Technologies, Inc ......... 2545 West Grandview Boulevard, Erie, PA 16506. 7990 NW 53rd Street, Suite 336, Doral, FL 33166. Bonamar Corporation ............. VerDate Sep<11>2014 17:21 Nov 05, 2015 Jkt 238001 PO 00000 Frm 00002 Date accepted for investigation 10/14/2015 10/22/2015 Fmt 4703 Sfmt 4703 Product(s) The firm manufactures custom quartz crystals and crystal oscillators. The firm manufactures crabmeat using a process that consists of pasteurizing/cooking and packing the crabmeat. E:\FR\FM\06NON1.SGM 06NON1 68836 Federal Register / Vol. 80, No. 215 / Friday, November 6, 2015 / Notices LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE— Continued [10/7/2015 through 10/22/2015 (amended)] Firm name Firm address Hastings Irrigation Pipe Co .... 1801 East South Street, Hastings, ND 68901. 2001 N. 17th Avenue, Melrose Park, IL 60160. Automation Systems, LLC ..... Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 71030, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the requirements set forth in EDA’s regulations at 13 CFR 315.9 for procedures to request a public hearing. The Catalog of Federal Domestic Assistance official number and title for the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance for Firms. Dated: November 2, 2015. Miriam Kearse, Lead Program Analyst. [FR Doc. 2015–28321 Filed 11–5–15; 8:45 am] BILLING CODE 3510–WH–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–70–2015] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone (FTZ) 39—Dallas/ Fort Worth, Texas; Notification of Proposed Production Activity, KONE, Inc. (Elevator Parts), Allen, Texas KONE, Inc. (KONE) submitted a notification of proposed production activity to the FTZ Board for its facility in Allen, Texas. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on October 29, 2015. The KONE facility is located within Site 21 of FTZ 39. The facility is used for the research, testing and manufacturing of elevator logic control enclosure electrification panels and pick-and-pack elevator part kits. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as VerDate Sep<11>2014 17:21 Nov 05, 2015 Jkt 238001 Date accepted for investigation Product(s) 10/22/2015 The firm manufactures alumimun pipe. 10/22/2015 The firm manufactures bolt, screw, and washer assembled components for the automotive and commercial markets. described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt KONE from customs duty payments on the foreign status components used in export production. On its domestic sales, KONE would be able to choose the duty rates during customs entry procedures that apply to elevator logic control enclosure electrification panels and pick-and-pack elevator part kits (duty rate ranges from duty-free to 2.7%) for the foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Adhesives; plastic rods; plastic tubes; plastic bushings; self-adhesive plastic electrical tape; plastic bumper strips in rolls; plastic guides and covers; plastic cover seals; plastic gaskets; plastic insulation; rubber gaskets; rubber pads; rubber isolation parts; paper film displays; paper labels; paper drilling templates; printed product information; galvanized steel sheets; galvanized steel wire; stainless steel sheets; steel profile parts; steel sheet piling; steel tubes; threaded steel elbows; threaded steel fittings; steel pipe fittings; steel chains; steel anchors; steel screws, bolts and nuts; steel spacer studs; steel lock washers; steel washers; steel rivets; steel cotter pins; steel mesh; steel rods; steel brackets; steel cabinets; copper plates; copper screws; copper nuts; copper springs; aluminum spacers; metal cabinet locks; lock parts (latch cam); base metal hinges for metal cabinets; base metal brackets, covers and handles for metal cabinets; base metal conduits and plates; sensors meant for weighing; circuit board parts; gearless motor stub shafts; bushings; roller screws; shaft couplings; clutches; electric motors; electric motor parts; electrical transformers; static converters; power inducers; electrical transformer parts; magnets; electromagnetic braking units; emergency intercoms; adapter modules; intercom/telephone parts; speakers; computerized voice recorders; printed circuit parts; pilot alarms; light PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 indicator panels; pilot lights for printed circuits; resistor assemblies; resistor parts; fuses; automatic circuit breakers; resistor capacitor unit protectors; relay units; circuit breakers; electronic seismic switches; switches; electrical connectors; electrical couplings; main controller CPU with printed circuit boards; electrical boards; box back panels; electronic integrated circuit parts; electrical encoders; electric conductors; LED display counters; and, LED speed-direction indicators (duty rate ranges from duty-free to 12.5%). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is December 16, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: October 30, 2015. Elizabeth Whiteman, Acting Executive Secretary. [FR Doc. 2015–28341 Filed 11–5–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–851] Certain Preserved Mushrooms From the People’s Republic of China: Preliminary Results of Antidumping Duty Administrative Review, and Rescission in Part; 2014/2015 Enforcement and Compliance, International Trade Administration, Department of Commerce. AGENCY: E:\FR\FM\06NON1.SGM 06NON1

Agencies

[Federal Register Volume 80, Number 215 (Friday, November 6, 2015)]
[Notices]
[Pages 68835-68836]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-28321]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act 1974, as amended (19 
U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has 
received petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. Accordingly, EDA has 
initiated investigations to determine whether increased imports into 
the United States of articles like or directly competitive with those 
produced by each of these firms contributed importantly to the total or 
partial separation of the firm's workers, or threat thereof, and to a 
decrease in sales or production of each petitioning firm.

    List of Petitions Received by EDA For Certification Eligibility To Apply for Trade Adjustment Assistance
                                    [10/7/2015 through 10/22/2015 (amended)]
----------------------------------------------------------------------------------------------------------------
                                                                   Date accepted
              Firm name                      Firm address               for                  Product(s)
                                                                   investigation
----------------------------------------------------------------------------------------------------------------
Bliley Technologies, Inc.............  2545 West Grandview             10/14/2015  The firm manufactures custom
                                        Boulevard, Erie, PA                         quartz crystals and crystal
                                        16506.                                      oscillators.
Bonamar Corporation..................  7990 NW 53rd Street,            10/22/2015  The firm manufactures
                                        Suite 336, Doral, FL                        crabmeat using a process
                                        33166.                                      that consists of
                                                                                    pasteurizing/cooking and
                                                                                    packing the crabmeat.

[[Page 68836]]

 
Hastings Irrigation Pipe Co..........  1801 East South Street,         10/22/2015  The firm manufactures
                                        Hastings, ND 68901.                         alumimun pipe.
Automation Systems, LLC..............  2001 N. 17th Avenue,            10/22/2015  The firm manufactures bolt,
                                        Melrose Park, IL 60160.                     screw, and washer assembled
                                                                                    components for the
                                                                                    automotive and commercial
                                                                                    markets.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Trade Adjustment Assistance for Firms 
Division, Room 71030, Economic Development Administration, U.S. 
Department of Commerce, Washington, DC 20230, no later than ten (10) 
calendar days following publication of this notice.
    Please follow the requirements set forth in EDA's regulations at 13 
CFR 315.9 for procedures to request a public hearing. The Catalog of 
Federal Domestic Assistance official number and title for the program 
under which these petitions are submitted is 11.313, Trade Adjustment 
Assistance for Firms.

    Dated: November 2, 2015.
Miriam Kearse,
Lead Program Analyst.
[FR Doc. 2015-28321 Filed 11-5-15; 8:45 am]
BILLING CODE 3510-WH-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.