Advisory Committee Meeting, 60879 [2015-25650]
Download as PDF
<![CDATA[
Federal Register / Vol. 80, No. 195 / Thursday, October 8, 2015 / Notices
project fail, the applicant cannot
substitute an alternative site.
e. The grant recipient must comply
with the requirements in section § 230.8
in the final rule before funds will be
released.
f. After the project has closed, as a
requirement of the grant, grant
recipients will be required to provide
the Forest Service with a Geographic
Information System (GIS) shapefile: A
digital, vector-based storage format for
storing geometric location and
associated attribute information, of CFP
project tracts and cost share tracts, as
applicable.
g. Any funds not expended within the
grant period must be de-obligated and
returned to the Forest Service.
h. All media, press, signage, and other
documents discussing the creation of
the community forest must reference the
partnership and financial assistance by
the Forest Service through the CFP.
Additional information may be found
in section § 230.9 of the final rule.
Dated: October 2, 2015.
Patricia F. Hirami,
Associate Deputy Chief, State and Private
Forestry.
[FR Doc. 2015–25725 Filed 10–7–15; 8:45 am]
BILLING CODE 3411–15–P
DEPARTMENT OF AGRICULTURE
Grain Inspection, Packers and
Stockyards Administration
Advisory Committee Meeting
Grain Inspection, Packers and
Stockyards Administration, USDA.
ACTION: Notice of advisory committee
meeting.
AGENCY:
Pursuant to the Federal
Advisory Committee Act, this
constitutes notice of the upcoming
meeting of the Grain Inspection, Packers
and Stockyards Administration (GIPSA)
Grain Inspection Advisory Committee
(Advisory Committee). The Advisory
Committee meets annually to advise the
GIPSA Administrator on the programs
and services that GIPSA delivers under
the U.S. Grain Standards Act.
Recommendations by the Advisory
Committee help GIPSA better meet the
needs of its customers who operate in a
dynamic and changing marketplace.
DATES: October 27, 2015, 8:00 a.m. to
4:30 p.m.; and October 28, 2015, 8:00
a.m. to Noon.
ADDRESSES: The Advisory Committee
meeting will take place at GIPSA’s
National Grain Center, 10383 N.
Ambassador Drive, Kansas City,
Missouri 64153.
mstockstill on DSK4VPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
16:41 Oct 07, 2015
Jkt 238001
Requests to orally address the
Advisory Committee during the meeting
or written comments may be sent to:
Administrator, GIPSA, U.S. Department
of Agriculture, 1400 Independence
Avenue SW., STOP 3601, Washington,
DC 20250–3601. Requests and
comments may also be faxed to
(202) 690–2173.
FOR FURTHER INFORMATION CONTACT:
Terri L. Henry by phone at (202) 205–
8281 or by email at Terri.L.Henry@
usda.gov.
The
purpose of the Advisory Committee is to
provide advice to the GIPSA
Administrator with respect to the
implementation of the U.S. Grain
Standards Act (7 U.S.C. 71–87k).
Information about the Advisory
Committee is available on the GIPSA
Web site at https://www.gipsa.usda.gov/
fgis/adcommit.html.
The agenda will include service
delivery overview, quality updates, field
management overview, international
program updates, and technology and
science initiatives.
For a copy of the agenda please
contact Terri L. Henry by phone at
(202) 205–8281 or by email at
Terri.L.Henry@usda.gov.
Public participation will be limited to
written statements unless permission is
received from the Committee
Chairperson to orally address the
Advisory Committee. The meeting will
be open to the public.
Persons with disabilities who require
alternative means of communication of
program information or related
accommodations should contact Terri L.
Henry at the telephone number listed
above.
SUPPLEMENTARY INFORMATION:
Larry Mitchell,
Administrator, Grain Inspection, Packers and
Stockyards Administration.
[FR Doc. 2015–25650 Filed 10–7–15; 8:45 am]
BILLING CODE 3410–KD–P
DEPARTMENT OF COMMERCE
International Trade Administration
Meeting of the United States
Manufacturing Council
International Trade
Administration, Commerce.
ACTION: Notice of an open meeting.
AGENCY:
The United States
Manufacturing Council (Council) will
hold an open meeting on Friday,
October 23, 2015. The Council was
established in April 2004 to advise the
Secretary of Commerce on matters
SUMMARY:
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
60879
relating to the U.S. manufacturing
industry. The purpose of the meeting is
for Council members to review and
deliberate on recommendations
developed by the Workforce
Development subcommittee looking at
issues of shifting the image of
manufacturing and high school
educational approach enhancements for
consideration by the Manufacturing
Council. The agenda may change to
accommodate Council business. The
final agenda will be posted on the
Department of Commerce Web site for
the Council at https://trade.gov/
manufacturingcouncil, at least one week
in advance of the meeting.
DATES: Friday, October 23, 2015, 8:00
a.m.–2:00 p.m. The deadline for
members of the public to register,
including requests to make comments
during the meetings and for auxiliary
aids, or to submit written comments for
dissemination prior to the meeting, is 5
p.m. EDT on October 13, 2015.
ADDRESSES: The meeting will be held at
1651 Wilkening Road in Schaumburg,
Ilinois. Requests to register (including to
speak or for auxiliary aids) and any
written comments should be submitted
to: U.S. Manufacturing Council, U.S.
Department of Commerce, Room 4043,
1401 Constitution Avenue NW.,
Washington, DC 20230,
archana.sahgal@trade.gov. Members of
the public are encouraged to submit
registration requests and written
comments via email to ensure timely
receipt.
FOR FURTHER INFORMATION CONTACT:
Archana Sahgal, the United States
Manufacturing Council, Room 4043,
1401 Constitution Avenue NW.,
Washington, DC 20230, telephone: 202–
482–4501, email: archana.sahgal@
trade.gov.
SUPPLEMENTARY INFORMATION:
Background: The Council advises the
Secretary of Commerce on matters
relating to the U.S. manufacturing
industry.
Public Participation: The meeting will
be open to the public and will be
accessible to people with disabilities.
All guests are required to register in
advance by the deadline identified
under the DATES caption. Seating is
limited and will be on a first come, first
served basis. Requests for sign language
interpretation or other auxiliary aids
must be submitted by the registration
deadline. Last minute requests will be
accepted, but may be impossible to fill.
There will be fifteen (15) minutes
allotted for oral comments from
members of the public. To accommodate
as many speakers as possible, the time
E:\FR\FM\08OCN1.SGM
08OCN1
]]>Agencies
[Federal Register Volume 80, Number 195 (Thursday, October 8, 2015)]
[Notices]
[Page 60879]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-25650]
-----------------------------------------------------------------------
DEPARTMENT OF AGRICULTURE
Grain Inspection, Packers and Stockyards Administration
Advisory Committee Meeting
AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA.
ACTION: Notice of advisory committee meeting.
-----------------------------------------------------------------------
SUMMARY: Pursuant to the Federal Advisory Committee Act, this
constitutes notice of the upcoming meeting of the Grain Inspection,
Packers and Stockyards Administration (GIPSA) Grain Inspection Advisory
Committee (Advisory Committee). The Advisory Committee meets annually
to advise the GIPSA Administrator on the programs and services that
GIPSA delivers under the U.S. Grain Standards Act. Recommendations by
the Advisory Committee help GIPSA better meet the needs of its
customers who operate in a dynamic and changing marketplace.
DATES: October 27, 2015, 8:00 a.m. to 4:30 p.m.; and October 28, 2015,
8:00 a.m. to Noon.
ADDRESSES: The Advisory Committee meeting will take place at GIPSA's
National Grain Center, 10383 N. Ambassador Drive, Kansas City, Missouri
64153.
Requests to orally address the Advisory Committee during the
meeting or written comments may be sent to: Administrator, GIPSA, U.S.
Department of Agriculture, 1400 Independence Avenue SW., STOP 3601,
Washington, DC 20250-3601. Requests and comments may also be faxed to
(202) 690-2173.
FOR FURTHER INFORMATION CONTACT: Terri L. Henry by phone at (202) 205-
8281 or by email at Terri.L.Henry@usda.gov.
SUPPLEMENTARY INFORMATION: The purpose of the Advisory Committee is to
provide advice to the GIPSA Administrator with respect to the
implementation of the U.S. Grain Standards Act (7 U.S.C. 71-87k).
Information about the Advisory Committee is available on the GIPSA Web
site at https://www.gipsa.usda.gov/fgis/adcommit.html.
The agenda will include service delivery overview, quality updates,
field management overview, international program updates, and
technology and science initiatives.
For a copy of the agenda please contact Terri L. Henry by phone at
(202) 205-8281 or by email at Terri.L.Henry@usda.gov.
Public participation will be limited to written statements unless
permission is received from the Committee Chairperson to orally address
the Advisory Committee. The meeting will be open to the public.
Persons with disabilities who require alternative means of
communication of program information or related accommodations should
contact Terri L. Henry at the telephone number listed above.
Larry Mitchell,
Administrator, Grain Inspection, Packers and Stockyards Administration.
[FR Doc. 2015-25650 Filed 10-7-15; 8:45 am]
BILLING CODE 3410-KD-P
