Foreign-Trade Zone (FTZ) 33-Pittsburgh, Pennsylvania, Notification of Proposed Production Activity, DNP Imagingcomm America Corporation, Subzone 33E, (Thermal Transfer Ribbon Master Rolls), Mount Pleasant, Pennsylvania, 57785-57786 [2015-24453]

Download as PDF Federal Register / Vol. 80, No. 186 / Friday, September 25, 2015 / Notices before or after the meeting. Written comments and requests for time for oral comments must be sent to Debbie Maneely, RAC Coordiantor, Prescott National Forest Supervisor’s Office, 344 South Cortez Street, Prescott, Arizona 86301; or by email to dmaneely@ fs.fed.us, or via facsimile to 928–443– 8208. Meeting Accommodations: If you are a person requiring reasonable accommodation, please make requests in advance for sign language interpreting, assistive listening devices or other reasonable accommodation for access to the facility or proceedings by contacting the person listed in the section titled FOR FURTHER INFORMATION CONTACT. All reasonable accommodation requests are managed on a case by case basis. Dated: March 11, 2014. Teresa A. Chase, Forest Supervisor. [FR Doc. 2015–24385 Filed 9–24–15; 8:45 am] BILLING CODE 3411–15–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–64–2015] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone (FTZ) 230— Piedmont Triad Area, North Carolina, Notification of Proposed Production Activity, Deere-Hitachi Construction Machinery Corporation, (Hydraulic Excavators), Kernersville, North Carolina The Piedmont Triad Partnership, grantee of FTZ 230, submitted a notification of proposed production activity to the FTZ Board on behalf of Deere-Hitachi Construction Machinery Corporation (Deere-Hitachi), located in Kernersville, North Carolina. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 8, 2015. The Deere-Hitachi facility is located within Site 30 of FTZ 230. The facility is used for the production of hydraulic excavators. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Deere-Hitachi from customs duty payments on the foreignstatus components used in export production. On its domestic sales, VerDate Sep<11>2014 19:58 Sep 24, 2015 Jkt 235001 Deere-Hitachi would be able to choose the duty rate during customs entry procedures that applies to finished and unfinished hydraulic excavators (dutyfree) for the foreign-status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Plastic hoses/o-rings/seals; decals; rubber hoses not reinforced or otherwise combined with other materials with fittings; rubber hoses reinforced or otherwise combined only with textile materials; rubber hoses reinforced or otherwise combined with other material; v-belts; rubber floor mats/o-rings/seals/fittings; steel bolts/screws/nuts/spring washers/ other washers/cotters/cotter pins/pins/ stoppers/springs/tracks; steel parts comprised of pipe clamps, hose clamps, clips, caps and plugs and similar fasteners; steel catches; steel locks; engines; hydraulic cylinders; hydraulic motors; parts for cylinders and motors; pumps; compressors; air conditioner parts; fuel/oil filters; receiver-dryers used in air conditioning systems; air filters; parts of filters; excavator parts comprised of covers, shoes, booms, cabs, counterweights, side frames, brackets, large pins, links, and pipes; control valves; other valves; parts of valves; bushings; pulleys; swing bearings; gaskets made of metal sheeting; horns; alarms; sensors; battery relays; electrical switches; sockets; controllers; wire harnesses; and lighters (duty rates range from duty-free to 5.7%). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is November 4, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: September 18, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24451 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 57785 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–36–2015] Foreign-Trade Zone 122—Corpus Christi, Texas, Authorization of Production Activity, voestalpine Texas, LLC, Subzone 122T, (Hot Briquetted Iron), Portland, Texas On May 22, 2015, the Port of Corpus Christi Authority, grantee of FTZ 122, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of voestalpine Texas, LLC, within Subzone 122T, in Portland, Texas. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (80 FR 32085, 06/05/ 2015). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the Board’s regulations, including Section 400.14. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24447 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–63–2015] Foreign-Trade Zone (FTZ) 33— Pittsburgh, Pennsylvania, Notification of Proposed Production Activity, DNP Imagingcomm America Corporation, Subzone 33E, (Thermal Transfer Ribbon Master Rolls), Mount Pleasant, Pennsylvania DNP Imagingcomm America Corporation (DNP), operator of Subzone 33E, submitted a notification of proposed production activity to the FTZ Board for its facility within Subzone 33E, located in Mount Pleasant, Pennsylvania. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 4, 2015. DNP already has authority to produce thermal transfer ribbon (TTR) and monochrome TTR printer rolls using certain foreign-sourced components within Subzone 33E. The current request would add the production of TTR master rolls using foreign-sourced rolls of polyethylene terephthalate (PET) E:\FR\FM\25SEN1.SGM 25SEN1 57786 Federal Register / Vol. 80, No. 186 / Friday, September 25, 2015 / Notices film to the scope of authority. Pursuant to 15 CFR 400.14(b), the additional FTZ activity would be limited to the specific foreign-status material and specific finished product described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt DNP from customs duty payments on the foreign-status rolls of PET film (4.2% duty rate) used in export (an estimated 40 percent of shipments). On its domestic sales, DNP would be able to choose the duty rate during customs entry procedures that applies to TTR master rolls (duty rate 3.7%) for the foreign-status PET film. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The request notes that DNP’s proposed activity would involve PET film that is subject to antidumping/ countervailing duty (AD/CVD) orders. The FTZ Board’s regulations (15 CFR 400.14(e)) require that merchandise subject to AD/CVD orders be admitted to the zone in privileged foreign status (19 CFR 146.41). DNP’s request indicates that any PET film subject to an AD/CVD order, proceeding, or suspension of liquidation under AD/ CVD procedures would be used only in production for export (no TTR master rolls made from PET film subject to AD/ CVD orders would be shipped for U.S. consumption). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is November 4, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. mstockstill on DSK4VPTVN1PROD with NOTICES FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: September 17, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24453 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P VerDate Sep<11>2014 19:58 Sep 24, 2015 Jkt 235001 DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on October 27, 2015, 9:00 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. amended (5 U.S.C. app. 2 § 10(d)), that the portion of the meeting dealing with matters the premature disclosure of which would be likely to frustrate significantly implementation of a proposed agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a) (1) and 10(a) (3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. Dated: September 21, 2015. Yvette Springer, Committee Liaison Officer . [FR Doc. 2015–24389 Filed 9–24–15; 8:45 am] BILLING CODE 3510–JT–P Agenda DEPARTMENT OF COMMERCE Open Session: 1. Opening remarks and introductions. 2. Presentation of papers and comments by the Public. 3. Discussions on results from last, and proposals from last Wassenaar meeting. 4. Report on proposed and recently issued changes to the Export Administration Regulations. 5. Selection of CY 2016 meeting dates. 6. Other business. Closed Session: 7. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10 (a) (1) and 10 (a) (3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov, no later than October 20, 2015. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate the distribution of public presentation materials to the Committee members, the Committee suggests that presenters forward the public presentation materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on February 20, 2015, pursuant to Section 10(d) of the Federal Advisory Committee Act, as Bureau of Industry and Security PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on October 28 and 29, 2015, 9:00 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to information systems equipment and technology. Wednesday, October 28 Open Session 1. Welcome and Introductions 2. Working Group Reports 3. Old Business 4. Discussion/Workshop: Wassenaar Arrangement 2013 Plenary Agreements Implementation: Intrusion and Surveillance Items— discussion of the scope of products to be controlled pursuant to the definition of ‘‘intrusion software’’ 5. Industry Presentation: Proposals to BIS for Wassenaar 2016 Cycle 6. New Business Thursday, October 29 Closed Session 7. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 sections 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on E:\FR\FM\25SEN1.SGM 25SEN1

Agencies

[Federal Register Volume 80, Number 186 (Friday, September 25, 2015)]
[Notices]
[Pages 57785-57786]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-24453]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-63-2015]


Foreign-Trade Zone (FTZ) 33--Pittsburgh, Pennsylvania, 
Notification of Proposed Production Activity, DNP Imagingcomm America 
Corporation, Subzone 33E, (Thermal Transfer Ribbon Master Rolls), Mount 
Pleasant, Pennsylvania

    DNP Imagingcomm America Corporation (DNP), operator of Subzone 33E, 
submitted a notification of proposed production activity to the FTZ 
Board for its facility within Subzone 33E, located in Mount Pleasant, 
Pennsylvania. The notification conforming to the requirements of the 
regulations of the FTZ Board (15 CFR 400.22) was received on September 
4, 2015.
    DNP already has authority to produce thermal transfer ribbon (TTR) 
and monochrome TTR printer rolls using certain foreign-sourced 
components within Subzone 33E. The current request would add the 
production of TTR master rolls using foreign-sourced rolls of 
polyethylene terephthalate (PET)

[[Page 57786]]

film to the scope of authority. Pursuant to 15 CFR 400.14(b), the 
additional FTZ activity would be limited to the specific foreign-status 
material and specific finished product described in the submitted 
notification (as described below) and subsequently authorized by the 
FTZ Board.
    Production under FTZ procedures could exempt DNP from customs duty 
payments on the foreign-status rolls of PET film (4.2% duty rate) used 
in export (an estimated 40 percent of shipments). On its domestic 
sales, DNP would be able to choose the duty rate during customs entry 
procedures that applies to TTR master rolls (duty rate 3.7%) for the 
foreign-status PET film. Customs duties also could possibly be deferred 
or reduced on foreign-status production equipment.
    The request notes that DNP's proposed activity would involve PET 
film that is subject to antidumping/countervailing duty (AD/CVD) 
orders. The FTZ Board's regulations (15 CFR 400.14(e)) require that 
merchandise subject to AD/CVD orders be admitted to the zone in 
privileged foreign status (19 CFR 146.41). DNP's request indicates that 
any PET film subject to an AD/CVD order, proceeding, or suspension of 
liquidation under AD/CVD procedures would be used only in production 
for export (no TTR master rolls made from PET film subject to AD/CVD 
orders would be shipped for U.S. consumption).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is November 4, 
2015.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.

FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov 
or (202) 482-1367.

    Dated: September 17, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-24453 Filed 9-24-15; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.