Foreign-Trade Zone (FTZ) 230-Piedmont Triad Area, North Carolina, Notification of Proposed Production Activity, Deere-Hitachi Construction Machinery Corporation, (Hydraulic Excavators), Kernersville, North Carolina, 57785 [2015-24451]

Download as PDF Federal Register / Vol. 80, No. 186 / Friday, September 25, 2015 / Notices before or after the meeting. Written comments and requests for time for oral comments must be sent to Debbie Maneely, RAC Coordiantor, Prescott National Forest Supervisor’s Office, 344 South Cortez Street, Prescott, Arizona 86301; or by email to dmaneely@ fs.fed.us, or via facsimile to 928–443– 8208. Meeting Accommodations: If you are a person requiring reasonable accommodation, please make requests in advance for sign language interpreting, assistive listening devices or other reasonable accommodation for access to the facility or proceedings by contacting the person listed in the section titled FOR FURTHER INFORMATION CONTACT. All reasonable accommodation requests are managed on a case by case basis. Dated: March 11, 2014. Teresa A. Chase, Forest Supervisor. [FR Doc. 2015–24385 Filed 9–24–15; 8:45 am] BILLING CODE 3411–15–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–64–2015] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone (FTZ) 230— Piedmont Triad Area, North Carolina, Notification of Proposed Production Activity, Deere-Hitachi Construction Machinery Corporation, (Hydraulic Excavators), Kernersville, North Carolina The Piedmont Triad Partnership, grantee of FTZ 230, submitted a notification of proposed production activity to the FTZ Board on behalf of Deere-Hitachi Construction Machinery Corporation (Deere-Hitachi), located in Kernersville, North Carolina. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 8, 2015. The Deere-Hitachi facility is located within Site 30 of FTZ 230. The facility is used for the production of hydraulic excavators. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Deere-Hitachi from customs duty payments on the foreignstatus components used in export production. On its domestic sales, VerDate Sep<11>2014 19:58 Sep 24, 2015 Jkt 235001 Deere-Hitachi would be able to choose the duty rate during customs entry procedures that applies to finished and unfinished hydraulic excavators (dutyfree) for the foreign-status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Plastic hoses/o-rings/seals; decals; rubber hoses not reinforced or otherwise combined with other materials with fittings; rubber hoses reinforced or otherwise combined only with textile materials; rubber hoses reinforced or otherwise combined with other material; v-belts; rubber floor mats/o-rings/seals/fittings; steel bolts/screws/nuts/spring washers/ other washers/cotters/cotter pins/pins/ stoppers/springs/tracks; steel parts comprised of pipe clamps, hose clamps, clips, caps and plugs and similar fasteners; steel catches; steel locks; engines; hydraulic cylinders; hydraulic motors; parts for cylinders and motors; pumps; compressors; air conditioner parts; fuel/oil filters; receiver-dryers used in air conditioning systems; air filters; parts of filters; excavator parts comprised of covers, shoes, booms, cabs, counterweights, side frames, brackets, large pins, links, and pipes; control valves; other valves; parts of valves; bushings; pulleys; swing bearings; gaskets made of metal sheeting; horns; alarms; sensors; battery relays; electrical switches; sockets; controllers; wire harnesses; and lighters (duty rates range from duty-free to 5.7%). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is November 4, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: September 18, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24451 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 57785 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–36–2015] Foreign-Trade Zone 122—Corpus Christi, Texas, Authorization of Production Activity, voestalpine Texas, LLC, Subzone 122T, (Hot Briquetted Iron), Portland, Texas On May 22, 2015, the Port of Corpus Christi Authority, grantee of FTZ 122, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of voestalpine Texas, LLC, within Subzone 122T, in Portland, Texas. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (80 FR 32085, 06/05/ 2015). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the Board’s regulations, including Section 400.14. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24447 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–63–2015] Foreign-Trade Zone (FTZ) 33— Pittsburgh, Pennsylvania, Notification of Proposed Production Activity, DNP Imagingcomm America Corporation, Subzone 33E, (Thermal Transfer Ribbon Master Rolls), Mount Pleasant, Pennsylvania DNP Imagingcomm America Corporation (DNP), operator of Subzone 33E, submitted a notification of proposed production activity to the FTZ Board for its facility within Subzone 33E, located in Mount Pleasant, Pennsylvania. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 4, 2015. DNP already has authority to produce thermal transfer ribbon (TTR) and monochrome TTR printer rolls using certain foreign-sourced components within Subzone 33E. The current request would add the production of TTR master rolls using foreign-sourced rolls of polyethylene terephthalate (PET) E:\FR\FM\25SEN1.SGM 25SEN1

Agencies

[Federal Register Volume 80, Number 186 (Friday, September 25, 2015)]
[Notices]
[Page 57785]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-24451]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-64-2015]


Foreign-Trade Zone (FTZ) 230--Piedmont Triad Area, North 
Carolina, Notification of Proposed Production Activity, Deere-Hitachi 
Construction Machinery Corporation, (Hydraulic Excavators), 
Kernersville, North Carolina

    The Piedmont Triad Partnership, grantee of FTZ 230, submitted a 
notification of proposed production activity to the FTZ Board on behalf 
of Deere-Hitachi Construction Machinery Corporation (Deere-Hitachi), 
located in Kernersville, North Carolina. The notification conforming to 
the requirements of the regulations of the FTZ Board (15 CFR 400.22) 
was received on September 8, 2015.
    The Deere-Hitachi facility is located within Site 30 of FTZ 230. 
The facility is used for the production of hydraulic excavators. 
Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the 
specific foreign-status materials and components and specific finished 
products described in the submitted notification (as described below) 
and subsequently authorized by the FTZ Board.
    Production under FTZ procedures could exempt Deere-Hitachi from 
customs duty payments on the foreign-status components used in export 
production. On its domestic sales, Deere-Hitachi would be able to 
choose the duty rate during customs entry procedures that applies to 
finished and unfinished hydraulic excavators (duty-free) for the 
foreign-status inputs noted below. Customs duties also could possibly 
be deferred or reduced on foreign-status production equipment.
    The components and materials sourced from abroad include: Plastic 
hoses/o-rings/seals; decals; rubber hoses not reinforced or otherwise 
combined with other materials with fittings; rubber hoses reinforced or 
otherwise combined only with textile materials; rubber hoses reinforced 
or otherwise combined with other material; v-belts; rubber floor mats/
o-rings/seals/fittings; steel bolts/screws/nuts/spring washers/other 
washers/cotters/cotter pins/pins/stoppers/springs/tracks; steel parts 
comprised of pipe clamps, hose clamps, clips, caps and plugs and 
similar fasteners; steel catches; steel locks; engines; hydraulic 
cylinders; hydraulic motors; parts for cylinders and motors; pumps; 
compressors; air conditioner parts; fuel/oil filters; receiver-dryers 
used in air conditioning systems; air filters; parts of filters; 
excavator parts comprised of covers, shoes, booms, cabs, 
counterweights, side frames, brackets, large pins, links, and pipes; 
control valves; other valves; parts of valves; bushings; pulleys; swing 
bearings; gaskets made of metal sheeting; horns; alarms; sensors; 
battery relays; electrical switches; sockets; controllers; wire 
harnesses; and lighters (duty rates range from duty-free to 5.7%).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is November 4, 
2015.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.

FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov 
or (202) 482-1367.

    Dated: September 18, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-24451 Filed 9-24-15; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.