Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting, 57786 [2015-24389]

Download as PDF 57786 Federal Register / Vol. 80, No. 186 / Friday, September 25, 2015 / Notices film to the scope of authority. Pursuant to 15 CFR 400.14(b), the additional FTZ activity would be limited to the specific foreign-status material and specific finished product described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt DNP from customs duty payments on the foreign-status rolls of PET film (4.2% duty rate) used in export (an estimated 40 percent of shipments). On its domestic sales, DNP would be able to choose the duty rate during customs entry procedures that applies to TTR master rolls (duty rate 3.7%) for the foreign-status PET film. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The request notes that DNP’s proposed activity would involve PET film that is subject to antidumping/ countervailing duty (AD/CVD) orders. The FTZ Board’s regulations (15 CFR 400.14(e)) require that merchandise subject to AD/CVD orders be admitted to the zone in privileged foreign status (19 CFR 146.41). DNP’s request indicates that any PET film subject to an AD/CVD order, proceeding, or suspension of liquidation under AD/ CVD procedures would be used only in production for export (no TTR master rolls made from PET film subject to AD/ CVD orders would be shipped for U.S. consumption). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is November 4, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. mstockstill on DSK4VPTVN1PROD with NOTICES FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: September 17, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–24453 Filed 9–24–15; 8:45 am] BILLING CODE 3510–DS–P VerDate Sep<11>2014 19:58 Sep 24, 2015 Jkt 235001 DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on October 27, 2015, 9:00 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. amended (5 U.S.C. app. 2 § 10(d)), that the portion of the meeting dealing with matters the premature disclosure of which would be likely to frustrate significantly implementation of a proposed agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a) (1) and 10(a) (3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. Dated: September 21, 2015. Yvette Springer, Committee Liaison Officer . [FR Doc. 2015–24389 Filed 9–24–15; 8:45 am] BILLING CODE 3510–JT–P Agenda DEPARTMENT OF COMMERCE Open Session: 1. Opening remarks and introductions. 2. Presentation of papers and comments by the Public. 3. Discussions on results from last, and proposals from last Wassenaar meeting. 4. Report on proposed and recently issued changes to the Export Administration Regulations. 5. Selection of CY 2016 meeting dates. 6. Other business. Closed Session: 7. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10 (a) (1) and 10 (a) (3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov, no later than October 20, 2015. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate the distribution of public presentation materials to the Committee members, the Committee suggests that presenters forward the public presentation materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on February 20, 2015, pursuant to Section 10(d) of the Federal Advisory Committee Act, as Bureau of Industry and Security PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on October 28 and 29, 2015, 9:00 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to information systems equipment and technology. Wednesday, October 28 Open Session 1. Welcome and Introductions 2. Working Group Reports 3. Old Business 4. Discussion/Workshop: Wassenaar Arrangement 2013 Plenary Agreements Implementation: Intrusion and Surveillance Items— discussion of the scope of products to be controlled pursuant to the definition of ‘‘intrusion software’’ 5. Industry Presentation: Proposals to BIS for Wassenaar 2016 Cycle 6. New Business Thursday, October 29 Closed Session 7. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 sections 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on E:\FR\FM\25SEN1.SGM 25SEN1

Agencies

[Federal Register Volume 80, Number 186 (Friday, September 25, 2015)]
[Notices]
[Page 57786]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-24389]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security


Materials Processing Equipment Technical Advisory Committee; 
Notice of Partially Closed Meeting

    The Materials Processing Equipment Technical Advisory Committee 
(MPETAC) will meet on October 27, 2015, 9:00 a.m., Room 3884, in the 
Herbert C. Hoover Building, 14th Street between Pennsylvania and 
Constitution Avenues NW., Washington, DC. The Committee advises the 
Office of the Assistant Secretary for Export Administration with 
respect to technical questions that affect the level of export controls 
applicable to materials processing equipment and related technology.

Agenda

    Open Session:
    1. Opening remarks and introductions.
    2. Presentation of papers and comments by the Public.
    3. Discussions on results from last, and proposals from last 
Wassenaar meeting.
    4. Report on proposed and recently issued changes to the Export 
Administration Regulations.
    5. Selection of CY 2016 meeting dates.
    6. Other business.

    Closed Session:
    7. Discussion of matters determined to be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10 (a) (1) and 10 (a) (3).
    The open session will be accessible via teleconference to 20 
participants on a first come, first serve basis. To join the 
conference, submit inquiries to Ms. Yvette Springer at 
Yvette.Springer@bis.doc.gov, no later than October 20, 2015.
    A limited number of seats will be available for the public session. 
Reservations are not accepted. To the extent that time permits, members 
of the public may present oral statements to the Committee. The public 
may submit written statements at any time before or after the meeting. 
However, to facilitate the distribution of public presentation 
materials to the Committee members, the Committee suggests that 
presenters forward the public presentation materials prior to the 
meeting to Ms. Springer via email.
    The Assistant Secretary for Administration, with the concurrence of 
the delegate of the General Counsel, formally determined on February 
20, 2015, pursuant to Section 10(d) of the Federal Advisory Committee 
Act, as amended (5 U.S.C. app. 2 Sec.  10(d)), that the portion of the 
meeting dealing with matters the premature disclosure of which would be 
likely to frustrate significantly implementation of a proposed agency 
action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10(a) (1) and 10(a) (3). The remaining portions of the 
meeting will be open to the public.
    For more information, call Yvette Springer at (202) 482-2813.

    Dated: September 21, 2015.
Yvette Springer,
Committee Liaison Officer .
[FR Doc. 2015-24389 Filed 9-24-15; 8:45 am]
 BILLING CODE 3510-JT-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.