Foreign-Trade Zone (FTZ) 119-Minneapolis-St. Paul, Minnesota; Notification of Proposed Production Activity; CNH Industrial America, LLC (Agricultural Equipment and Related Subassemblies and Attachments); Benson, Minnesota, 56962-56964 [2015-23644]
Download as PDF
<![CDATA[
56962
Federal Register / Vol. 80, No. 182 / Monday, September 21, 2015 / Notices
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE
[9/9/2015 through 9/15/2015]
Firm name
Firm address
Bruckman Rubber Company ..
101 South St., Joseph Avenue, Hastings, NE 68902.
8005 Highway 36 North,
Brenham, TX 77833.
910 Kehrs Mill Road, Suite
112, Ballwin, MO 630111.
11968 Investment Drive,
Shelby Township, MI 48315.
C&P Plastics, Inc ...................
Gateway Shoes, LLC .............
Okubo Gear America, Inc.
and Subsidiary—Avon Gear
Company.
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
71030, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
Dated: September 15, 2015.
Michael S. DeVillo,
Eligibility Examiner.
[FR Doc. 2015–23670 Filed 9–18–15; 8:45 am]
BILLING CODE 3510–WH–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–62–2015]
Foreign-Trade Zone 82—Mobile,
Alabama; Application for Subzone;
Outokumpu Stainless USA, LLC;
Calvert, Alabama
rmajette on DSK7SPTVN1PROD with NOTICES
Date accepted
for investigation
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the City of Mobile, grantee of FTZ 82,
requesting subzone status for the facility
of Outokumpu Stainless USA, LLC
(Outokumpu), located in Calvert,
Alabama. The application was
submitted pursuant to the provisions of
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the FTZ Board (15 CFR
part 400). It was formally docketed on
September 10, 2015.
The proposed subzone (1,998 acres) is
located at 1 ThyssenKrupp Drive in
Calvert (Mobile County). Production
VerDate Sep<11>2014
15:14 Sep 18, 2015
Jkt 235001
9/10/2015
9/11/2015
9/11/2015
9/11/2015
Product(s)
The firm produces industrial rubber products produced by
molding and die cutting custom rubber compounds.
The firm manufactures precision plastic parts for multiple industries.
The firm manufactures formal dress shoes for men and
boys/children- made of rubber, plastic and leather.
The firm manufactures large diameter, tight tolerance, machined parts used in roller bearing assemblies and other
components.
authority has already been approved for
the facility (Doc. B–28–2015, 80 FR
51535, 8/25/2015). The Outokompu
facility is currently designated as
Subzone 82I with authority expiring on
December 20, 2015.
In accordance with the FTZ Board’s
regulations, Camille Evans of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
November 2, 2015. Rebuttal comments
in response to material submitted
during the foregoing period may be
submitted during the subsequent 15-day
period to November 16, 2015.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Camille Evans at Camille.Evans@
trade.gov or (202) 482–2350.
DEPARTMENT OF COMMERCE
Dated: September 10, 2015.
Andrew McGilvray,
Executive Secretary.
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–35–2015]
Foreign-Trade Zone (FTZ) 54—Clinton
County, New York; Authorization of
Production Activity; Swarovski
Lighting, Ltd.; (Lighting Fixtures and
Parts) Plattsburgh, New York
On May 15, 2015, the Clinton County
Area Development Corporation, grantee
of FTZ 54, submitted a notification of
proposed production activity to the FTZ
Board on behalf of Swarovski Lighting,
Ltd., within FTZ 54, in Plattsburgh,
New York.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 30659–30660,
05/29/2015). The FTZ Board has
determined that no further review of the
activity is warranted at this time. The
production activity described in the
notification is authorized, subject to the
FTZ Act and the Board’s regulations,
including Section 400.14.
Dated: September 11, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–23642 Filed 9–18–15; 8:45 am]
BILLING CODE 3510–DS–P
Foreign-Trade Zones Board
[FR Doc. 2015–23647 Filed 9–18–15; 8:45 am]
[B–61–2015]
BILLING CODE 3510–DS–P
PO 00000
Foreign-Trade Zone (FTZ) 119—
Minneapolis-St. Paul, Minnesota;
Notification of Proposed Production
Activity; CNH Industrial America, LLC
(Agricultural Equipment and Related
Subassemblies and Attachments);
Benson, Minnesota
CNH Industrial America, LLC (CNH)
submitted a notification of proposed
Frm 00003
Fmt 4703
Sfmt 4703
E:\FR\FM\21SEN1.SGM
21SEN1
rmajette on DSK7SPTVN1PROD with NOTICES
Federal Register / Vol. 80, No. 182 / Monday, September 21, 2015 / Notices
production activity to the FTZ Board for
its facilities located in Benson,
Minnesota. The notification conforming
to the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on September 8, 2015.
A separate application for subzone
designation at the CNH facilities will be
submitted and will be processed under
Section 400.31 of the FTZ Board’s
regulations. The facilities are used for
the production of agricultural
equipment, subassemblies and
attachments. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited
to the specific foreign-status materials
and components and specific finished
products described in the submitted
notification (as described below) and
subsequently authorized by the FTZ
Board.
Production under FTZ procedures
could exempt CNH from customs duty
payments on the foreign-status
components used in export production.
On its domestic sales, for the foreignstatus inputs noted below, CNH would
be able to choose the duty rates during
customs entry procedures that apply to:
Sprayers for agricultural chemical or
water application; floaters for
agricultural chemical or water
application; flexair applicators
(attachments for floaters); cotton
harvesters; liquid applicators
(attachments for tractors); cotton drums
(attachments for cotton harvesters);
sprayer axle castings (subassemblies for
sprayers); and, pull-type sprayers
(attachments for tractors) (duty rates are
free or 2.5%). Customs duties also could
possibly be deferred or reduced on
foreign-status production equipment.
The components and materials
sourced from abroad include: Articles of
plastic (hoses, pipes and tubes with
fittings; j-flex/thermoplastic/wire
reinforced tubes, pipes and fittings;
caution decals; caps; steering wheel
knobs; thrust washers; air ducts; plugs;
clamps and seals); silicon hoses and
hose assemblies; articles of rubber
(seals; o-rings; gaskets; elbows;
reinforced hoses and hose assemblies;
reinforced hoses with or without
fittings; hydraulic hoses; transmission
belts; vulcanized belts; v-belts; drive
belts; belt assemblies; drive belt
assemblies; buffers; floor mats; liners;
sealing washers; shock absorbers;
insulators; and blocks); coated
paperboard gaskets; paper mat
protectors; training manuals; drawings;
schematics; catalogs; diamond braid
polyester rope with acrylic core for
sprayers; powder coat anti-skid mats
and strips for steps; carbon and graphite
exhaust gaskets; glass for cabs;
windshield glass; mirrors and mirror
VerDate Sep<11>2014
15:14 Sep 18, 2015
Jkt 235001
assemblies; cold-rolled iron/steel
hollow tubes; galvanized steel tubes;
stainless steel tubes; alloy steel coldrolled tubes; iron/non-alloy steel
fittings, elbows and stems; steel/zincplated steel hydraulic connectors; iron/
non-alloy steel fittings, o-rings and
connectors; zinc-plated steel connector
tees; copper/zinc-plated steel/
galvanized steel cables; cable
assemblies; metal ropes; wire ropes;
iron/steel chains, chain assemblies and
links; zinc-plated steel chains; safety
chains; zinc-plated steel chain kits and
chain assemblies; zinc-plated steel link
and link assemblies; articles of steel
(screws; bolts; pins; fasteners; carriage
bolts; u-bolts; steering column screws;
weld nuts; stud ball pins; washers;
rivets; spring clips, circle pins; hinges;
hitch pins; rod assemblies; springs;
brackets; clamps; retaining straps;
collars and button-plugs); tinned copper
ground straps; ground cables;
aluminum/copper/steel rivets and
springs; hex wrench sets; hammers;
gathering chain tool assemblies; latches;
locks and lock assemblies; door handles
with locks; ignition keys; hinges; gas
struts; angles; brackets; supports;
mounts; dampers; plugs; radiator caps;
covers; dust caps; decals; name plates;
identity plates; emblems; 6-cylinder
engines for sprayers and floaters;
propulsion engines for sprayers and
floaters for agricultural use; air intake
tubes; hydraulic cylinders; hydraulic
motors; pneumatic engine pistons; fuel
injection pumps for engines; master
cylinders; hydraulic pumps; pumps ;
pump controls; fans; fan assemblies;
blowers; blower assemblies; air
compressors; fan couplings; heater
cores; condensers; condenser
assemblies; water filters; water screens;
water strainers; fuel filters; hydraulic
filters; filter receiver dryers;
thermostats; air filters; air cleaners and
assemblies; catalytic converters; air
cleaner housing assemblies; sprayer
nozzles; jacks; lift cylinders;
counterweights; mufflers; valve plates;
supporting brackets; buckets; bucket
attachments; channels; wrist rest
assemblies; frames with tracks; shovel
brackets; baffles; shovel discs; steering
arms; rear axles; drum drive assemblies;
drums; drum assemblies; air ducts;
headers; pulley housings; link
assemblies; hubs; grain pans;
accumulators; commutator brushes and
straps; wiper brushes; fuel and water
conversion kits; wiper blades and
assemblies; hydraulic valves; copper/
iron/steel non-returnable check valves;
poppet valves; control valves; drain
cocks and assemblies; shut-off valves;
fitting kits; solenoid valves; valve
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
56963
covers; valve manifolds; pistons;
connecting and coupling blocks;
cylinder caps; cartridges; control blocks;
pistons; hydraulic control valves; ball
bearings; bearing sets and assemblies;
bushings; cup bearings; thrust washers;
tapered bearings and assemblies; roller
bearings; cone bearings; shims; spacers;
shafts; bearing housings; bearing
carriers; bearing supports; gearbox
assemblies; gears; gear sets; pulleys;
idlers; belt tensioners; clutches;
dampers; gaskets; engine gaskets and
kits; seal kits; oil seals; seal repair kits;
taper fasteners; ballast assemblies; wiper
motors; starter motors; actuators;
window adjustment motors; instrument
and control motors; motor kits; DC
converters; magnets; magnetic rings;
solenoids; coils; wet and dry batteries;
starter motors; alternators; head/rear/
work lamps; visual signaling equipment;
alarms; horns; buzzers; wiper blades;
heaters; heater blocks; speakers; radars;
true ground sensors; radios; radio parts;
monitors; radio antennas; beacon lights;
electric throttle assemblies;
potentiometers; sensors; fuses; electrical
timers; ignition switches; switch
assemblies; unloading switches;
rectifiers; programmable controllers;
instrument control assemblies; shifter
circuit kits; electrical connectors; wire
connectors; printed circuit boards;
housing contacts; lamps; bulbs; pressure
and humidity sensors; cables; ground
cables; electrical wires; electrical cable;
wire harnesses; antenna cables; sprayer
cabs; monitor tubes, housings,
instrument panels, hoods, covers, and
handles for sprayer and floater cabs;
brake pipes; gearbox covers; axles, hubs,
axle inserts, wheels, shock absorbers,
arms, housings, castings, radiators,
exhaust system pipes, mufflers,
clutches, steering columns, bracket
assemblies, booms, casting supports,
frames, handrails, steering cylinder
mounts and levers for tractor/floater/
sprayer attachments; temperature
sensors; fuel sender units; flow meters;
instrument clusters; tachometers;
instrument panels; seats; and armrests
(duty rates range from duty-free to
9.9%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
November 2, 2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
E:\FR\FM\21SEN1.SGM
21SEN1
56964
Federal Register / Vol. 80, No. 182 / Monday, September 21, 2015 / Notices
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov or
(202) 482–1367.
Dated: September 10, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–23644 Filed 9–18–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
Notice of Federal Consistency Appeal
to the Objection of a Proposed Project
´
in Guanica, Puerto Rico
National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice of appeal.
AGENCY:
This announcement provides
public notice that Louis Charles Rose
(Appellant) has filed an administrative
appeal under the Coastal Zone
Management Act (CZMA), 16 U.S.C.
1451 et seq. asking the Secretary of
Commerce (Secretary) to override an
objection by the Puerto Rico Planning
Board (Board) to the proposed
construction of a private deck in
´
Guanica, Puerto Rico.
DATES: Written comments and requests
for public hearing will be considered if
received no later than October 21, 2015.
ADDRESSES: You may submit written
comments or requests for a public
hearing to NOAA, Office of the General
Counsel for Ocean Services, Attn.
Gladys Miles, 1305 East-West Highway,
Room 6111, Silver Spring, MD 20910, or
via email to gcos.comments@noaa.gov.
SUPPLEMENTARY INFORMATION:
rmajette on DSK7SPTVN1PROD with NOTICES
SUMMARY:
I. Background
On August 20, 2015, Louis Charles
Rose filed notice of an appeal with the
Secretary pursuant to the Coastal Zone
Management Act (CZMA), 16 U.S.C.
1451 et seq., and regulations at 15 CFR
part 930, subpart H. Appellant appealed
an objection by the Puerto Rico
Planning Board (Board) to a consistency
certification for a U.S. Army Corps of
Engineers permit necessary for the
proposed construction of a private deck
´
off the coast of Guanica, Puerto Rico.
Under the CZMA, the Secretary may
override the Board’s objection on
grounds that the project is consistent
with the objectives or purposes of the
CZMA or otherwise necessary in the
interest of national security. To make
the determination that the proposed
VerDate Sep<11>2014
15:14 Sep 18, 2015
Jkt 235001
activity is ‘‘consistent with the
objectives or purposes of the CZMA,’’
the Secretary must find that: (1) The
proposed activity furthers the national
interest as articulated in sections 302 or
303 of the CZMA, in a significant or
substantial manner; (2) the adverse
effects of the proposed activity do not
outweigh its contribution to the national
interest, when those effects are
considered separately or cumulatively;
and (3) no reasonable alternative is
available that would permit the activity
to be conducted in a manner consistent
with enforceable policies of the
applicable coastal management
program. 15 CFR 930.121. To make the
determination that the proposed activity
is ‘‘necessary in the interest of national
security,’’ the Secretary must find that a
national defense or other national
security interest would be significantly
impaired if the activity is not permitted
to go forward as proposed. 15 CFR
930.122.
II. Request for Public and Federal
Agency Comments
Pursuant to Department of Commerce
regulations, the public and interested
federal agencies may submit written
comments on this appeal. All comments
received will be made part of the public
record. All personal identifying
information (e.g., name, address, etc.),
confidential business information, or
otherwise sensitive information
submitted voluntarily by the sender will
be publicly accessible.
III. Opportunity for Public Hearing
Pursuant to Department of Commerce
regulations, the Secretary may hold a
public hearing on this appeal, either in
response to a written request for a
public hearing or upon his/her own
initiative. A written request for a public
hearing must include an explanation
why you believe a public hearing would
be beneficial and aid the decisionmaker. If a hearing is held, advance
notice of the time, date, and location
will be published in the Federal
Register. The Secretary will also reopen
the public and Federal agency comment
period for a 10-day period following the
hearing to allow for additional input.
IV. Public Availability of Appeal
Documents and Decisions
Materials and related documents
comprising the appeal record will be
publicly available during business
hours, at the NOAA, Office of the
General Counsel in the location
specified in the ADDRESSES section of
this notice. Past CZMA consistency
appeal decisions may also be viewed by
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
visiting: https://coast.noaa.gov/czm/
consistency/appeals/fcappealdecisions/.
[Federal Domestic Assistance Catalog No.
11.419 Coastal Zone Management Program
Assistance.]
Dated: September 14, 2015.
Jeffrey S. Dillen,
Acting Chief, Oceans & Coasts Section, NOAA
Office of the General Counsel.
[FR Doc. 2015–23610 Filed 9–18–15; 8:45 am]
BILLING CODE 3510–22–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XE200
Fisheries of the U.S. Caribbean;
Southeast Data, Assessment, and
Review (SEDAR); Public Meeting
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice of SEDAR 46 preworkshop webinar for Caribbean Datalimited Species.
AGENCY:
The SEDAR 46 assessment of
Caribbean Data-limited Species will
consist of one in-person workshop and
a series of webinars. See SUPPLEMENTARY
INFORMATION.
DATES: The SEDAR 46 pre-Workshop
webinar will be held October 6, 2015,
from 10 a.m. to 12 p.m. Eastern Time.
ADDRESSES: Meeting address: The
meeting will be held via webinar. The
webinar is open to members of the
public. Those interested in participating
should contact Julie A. Neer at SEDAR
(see FOR FURTHER INFORMATION CONTACT:
to request an invitation providing
webinar access information. Please
request webinar invitations at least 24
hours in advance of each webinar.
SEDAR address: 4055 Faber Place
Drive, Suite 201, North Charleston, SC
29405.
FOR FURTHER INFORMATION CONTACT: Julie
A. Neer, SEDAR Coordinator; phone:
(843) 571–4366; email: Julie.neer@
safmc.net.
SUMMARY:
The Gulf
of Mexico, South Atlantic, and
Caribbean Fishery Management
Councils, in conjunction with NOAA
Fisheries and the Atlantic and Gulf
States Marine Fisheries Commissions
have implemented the Southeast Data,
Assessment and Review (SEDAR)
process, a multi-step method for
determining the status of fish stocks in
the Southeast Region. SEDAR is a multi-
SUPPLEMENTARY INFORMATION:
E:\FR\FM\21SEN1.SGM
21SEN1
]]>Agencies
[Federal Register Volume 80, Number 182 (Monday, September 21, 2015)]
[Notices]
[Pages 56962-56964]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-23644]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-61-2015]
Foreign-Trade Zone (FTZ) 119--Minneapolis-St. Paul, Minnesota;
Notification of Proposed Production Activity; CNH Industrial America,
LLC (Agricultural Equipment and Related Subassemblies and Attachments);
Benson, Minnesota
CNH Industrial America, LLC (CNH) submitted a notification of
proposed
[[Page 56963]]
production activity to the FTZ Board for its facilities located in
Benson, Minnesota. The notification conforming to the requirements of
the regulations of the FTZ Board (15 CFR 400.22) was received on
September 8, 2015.
A separate application for subzone designation at the CNH
facilities will be submitted and will be processed under Section 400.31
of the FTZ Board's regulations. The facilities are used for the
production of agricultural equipment, subassemblies and attachments.
Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the
specific foreign-status materials and components and specific finished
products described in the submitted notification (as described below)
and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt CNH from customs duty
payments on the foreign-status components used in export production. On
its domestic sales, for the foreign-status inputs noted below, CNH
would be able to choose the duty rates during customs entry procedures
that apply to: Sprayers for agricultural chemical or water application;
floaters for agricultural chemical or water application; flexair
applicators (attachments for floaters); cotton harvesters; liquid
applicators (attachments for tractors); cotton drums (attachments for
cotton harvesters); sprayer axle castings (subassemblies for sprayers);
and, pull-type sprayers (attachments for tractors) (duty rates are free
or 2.5%). Customs duties also could possibly be deferred or reduced on
foreign-status production equipment.
The components and materials sourced from abroad include: Articles
of plastic (hoses, pipes and tubes with fittings; j-flex/thermoplastic/
wire reinforced tubes, pipes and fittings; caution decals; caps;
steering wheel knobs; thrust washers; air ducts; plugs; clamps and
seals); silicon hoses and hose assemblies; articles of rubber (seals;
o-rings; gaskets; elbows; reinforced hoses and hose assemblies;
reinforced hoses with or without fittings; hydraulic hoses;
transmission belts; vulcanized belts; v-belts; drive belts; belt
assemblies; drive belt assemblies; buffers; floor mats; liners; sealing
washers; shock absorbers; insulators; and blocks); coated paperboard
gaskets; paper mat protectors; training manuals; drawings; schematics;
catalogs; diamond braid polyester rope with acrylic core for sprayers;
powder coat anti-skid mats and strips for steps; carbon and graphite
exhaust gaskets; glass for cabs; windshield glass; mirrors and mirror
assemblies; cold-rolled iron/steel hollow tubes; galvanized steel
tubes; stainless steel tubes; alloy steel cold-rolled tubes; iron/non-
alloy steel fittings, elbows and stems; steel/zinc-plated steel
hydraulic connectors; iron/non-alloy steel fittings, o-rings and
connectors; zinc-plated steel connector tees; copper/zinc-plated steel/
galvanized steel cables; cable assemblies; metal ropes; wire ropes;
iron/steel chains, chain assemblies and links; zinc-plated steel
chains; safety chains; zinc-plated steel chain kits and chain
assemblies; zinc-plated steel link and link assemblies; articles of
steel (screws; bolts; pins; fasteners; carriage bolts; u-bolts;
steering column screws; weld nuts; stud ball pins; washers; rivets;
spring clips, circle pins; hinges; hitch pins; rod assemblies; springs;
brackets; clamps; retaining straps; collars and button-plugs); tinned
copper ground straps; ground cables; aluminum/copper/steel rivets and
springs; hex wrench sets; hammers; gathering chain tool assemblies;
latches; locks and lock assemblies; door handles with locks; ignition
keys; hinges; gas struts; angles; brackets; supports; mounts; dampers;
plugs; radiator caps; covers; dust caps; decals; name plates; identity
plates; emblems; 6-cylinder engines for sprayers and floaters;
propulsion engines for sprayers and floaters for agricultural use; air
intake tubes; hydraulic cylinders; hydraulic motors; pneumatic engine
pistons; fuel injection pumps for engines; master cylinders; hydraulic
pumps; pumps ; pump controls; fans; fan assemblies; blowers; blower
assemblies; air compressors; fan couplings; heater cores; condensers;
condenser assemblies; water filters; water screens; water strainers;
fuel filters; hydraulic filters; filter receiver dryers; thermostats;
air filters; air cleaners and assemblies; catalytic converters; air
cleaner housing assemblies; sprayer nozzles; jacks; lift cylinders;
counterweights; mufflers; valve plates; supporting brackets; buckets;
bucket attachments; channels; wrist rest assemblies; frames with
tracks; shovel brackets; baffles; shovel discs; steering arms; rear
axles; drum drive assemblies; drums; drum assemblies; air ducts;
headers; pulley housings; link assemblies; hubs; grain pans;
accumulators; commutator brushes and straps; wiper brushes; fuel and
water conversion kits; wiper blades and assemblies; hydraulic valves;
copper/iron/steel non-returnable check valves; poppet valves; control
valves; drain cocks and assemblies; shut-off valves; fitting kits;
solenoid valves; valve covers; valve manifolds; pistons; connecting and
coupling blocks; cylinder caps; cartridges; control blocks; pistons;
hydraulic control valves; ball bearings; bearing sets and assemblies;
bushings; cup bearings; thrust washers; tapered bearings and
assemblies; roller bearings; cone bearings; shims; spacers; shafts;
bearing housings; bearing carriers; bearing supports; gearbox
assemblies; gears; gear sets; pulleys; idlers; belt tensioners;
clutches; dampers; gaskets; engine gaskets and kits; seal kits; oil
seals; seal repair kits; taper fasteners; ballast assemblies; wiper
motors; starter motors; actuators; window adjustment motors; instrument
and control motors; motor kits; DC converters; magnets; magnetic rings;
solenoids; coils; wet and dry batteries; starter motors; alternators;
head/rear/work lamps; visual signaling equipment; alarms; horns;
buzzers; wiper blades; heaters; heater blocks; speakers; radars; true
ground sensors; radios; radio parts; monitors; radio antennas; beacon
lights; electric throttle assemblies; potentiometers; sensors; fuses;
electrical timers; ignition switches; switch assemblies; unloading
switches; rectifiers; programmable controllers; instrument control
assemblies; shifter circuit kits; electrical connectors; wire
connectors; printed circuit boards; housing contacts; lamps; bulbs;
pressure and humidity sensors; cables; ground cables; electrical wires;
electrical cable; wire harnesses; antenna cables; sprayer cabs; monitor
tubes, housings, instrument panels, hoods, covers, and handles for
sprayer and floater cabs; brake pipes; gearbox covers; axles, hubs,
axle inserts, wheels, shock absorbers, arms, housings, castings,
radiators, exhaust system pipes, mufflers, clutches, steering columns,
bracket assemblies, booms, casting supports, frames, handrails,
steering cylinder mounts and levers for tractor/floater/sprayer
attachments; temperature sensors; fuel sender units; flow meters;
instrument clusters; tachometers; instrument panels; seats; and
armrests (duty rates range from duty-free to 9.9%).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is November 2,
2015.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ
[[Page 56964]]
Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Diane Finver at
Diane.Finver@trade.gov or (202) 482-1367.
Dated: September 10, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-23644 Filed 9-18-15; 8:45 am]
BILLING CODE 3510-DS-P
