Certain New Chemicals; Receipt and Status Information for July 2015, 55613-55618 [2015-23297]
Download as PDF
<![CDATA[
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
• Email: Rosborough.Evelyn@epa.gov.
• Mail: Ms. Evelyn Rosborough, U.S.
Environmental Protection Agency,
Region 6, 1445 Ross Avenue, Dallas,
Texas 75202–2733.
Administrative Record: The proposed
general permit and other related
documents in the administrative record
are on file and may be inspected any
time between 8:00 a.m. and 4:30 p.m.,
Monday through Friday, excluding legal
holidays, at the addresses listed for
submission of comments. It is
recommended that you write or call to
the contact above for an appointment, so
the record(s) will be available at your
convenience.
FOR FURTHER INFORMATION CONTACT: Ms.
Evelyn Rosborough, U.S. Environmental
Protection Agency, Region 6, 1445 Ross
Avenue, Dallas, Texas 75202–2733.
Telephone: (214) 655–7515. Email
address: Rosborough.Evelyn@epa.gov.
Dated: September 2, 2015.
William K. Honker,
Director, Water Quality Protection Division,
EPA Region 6.
[FR Doc. 2015–23175 Filed 9–15–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2015–0502; FRL–9933–34]
Certain New Chemicals; Receipt and
Status Information for July 2015
SUPPLEMENTARY INFORMATION:
I. General Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
asabaliauskas on DSK7TPTVN1PROD with NOTICES
A. Does this action apply to me?
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from July 1,
2015 to July 30, 2015.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before October
16, 2015.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2015–0502,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
SUMMARY:
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA–Hotline, ABVI–Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the PMNs addressed in this action.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
55613
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
from July 1, 2015 to July 30, 2015, and
consists of the PMNs and TMEs both
pending and/or expired, and the NOCs
to manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic status reports on the new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
For the PMNs received by EPA during
this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
PMN; the date the PMN was received by
EPA; the projected end date for EPA’s
review of the PMN; the submitting
E:\FR\FM\16SEN1.SGM
16SEN1
55614
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
manufacturer/importer; the potential
uses identified by the manufacturer/
importer in the PMN; and the chemical
identity. As used in the table, (S) is used
to indicate that the information
provided in the table is the specific
information provided by the submitter,
and (G) is used to indicate that the
information provided in the table is
generic information because the specific
information provided by the submitter
was claimed as CBI.
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015
Received
date
Case No.
Projected
notice end
date
Manufacturer
importer
Chemical use
(G) Polymer intermediate
used in extrusion and
moulding.
(G) Chemical intermediate.
7/1/2015
9/29/2015
CBI ....................
P–15–0565 .....
7/1/2015
9/29/2015
CBI ....................
P–15–0566 .....
7/1/2015
9/29/2015
Allnex USA, Inc
(S) Thickener for waterborne industrial coatings.
P–15–0567 .....
7/1/2015
9/29/2015
CBI ....................
P–15–0568 .....
7/1/2015
9/29/2015
DIC International
(USA) LLC.
(G) UV cured coatings
and inks.
(G) Adhesives ................
P–15–0569 .....
7/1/2015
9/29/2015
OMG Americas,
Inc.
P–15–0569 .....
7/1/2015
9/29/2015
OMG Americas,
Inc.
P–15–0570 .....
7/1/2015
9/29/2015
OMG Americas,
Inc.
P–15–0571 .....
7/2/2015
9/30/2015
CBI ....................
P–15–0572 .....
7/2/2015
9/30/2015
CBI ....................
P–15–0573 .....
7/6/2015
10/4/2015
XF Technologies
P–15–0574 .....
7/7/2015
10/5/2015
CBI ....................
P–15–0575 .....
7/7/2015
10/5/2015
CBI ....................
P–15–0576 .....
7/7/2015
10/5/2015
CBI ....................
P–15–0580 .....
P–15–0581 .....
7/7/2015
7/7/2015
10/5/2015
10/5/2015
CBI ....................
CBI ....................
P–15–0582 .....
P–15–0583 .....
7/8/2015
7/8/2015
10/6/2015
10/6/2015
CBI ....................
CBI ....................
P–15–0584 .....
asabaliauskas on DSK7TPTVN1PROD with NOTICES
P–15–0564 .....
7/8/2015
10/6/2015
P–15–0585 .....
7/9/2015
10/7/2015
The Lewis
Chemical
Company.
CBI ....................
P–15–0586 .....
P–15–0587 .....
P–15–0588 .....
7/9/2015
7/9/2015
7/10/2015
10/7/2015
10/7/2015
10/8/2015
Bostik, Inc. ........
Bostik, Inc. ........
CBI ...................
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
PO 00000
Frm 00027
(S) Wetting and dispersion additive for paint
and coating industry.
(S) Wetting and Dispersion additive for pigment manufacturers.
(S) Wetting and Dispersion additive for pigment manufacturers.
(S) Raw material used in
the manufacture of lubricants.
(S) Raw material used in
the manufacture of lubricants.
(S) Chemical intermediate for xF production.
(G) Separation membrane.
(G) Monomer for a polymer.
(S) Additive/deflocculant
for water-based decorative and industrial
paints.
(G) Coating .....................
(G) Oilfield chemical additive.
(G) Intermediate .............
(G) Lubricant additive .....
(S) Foaming agent in industrial or hard surface
cleaners.
(S) Additive/deflocculant
for water-based decorative and industrial
paints.
(G) Adhesive ..................
(G) Adhesive ..................
(G) Component of inkjet
ink.
Fmt 4703
Sfmt 4703
Chemical identity
(G) Graft copolymer of polyolefin and polyamide.
(G) Polymeric products of reactions of epoxy with
organic acid and acrylic monomers, partially
neutralized with dimethyl ethanolamine.
(G) Alkanedioic acid, polymer with substituted
carbomonocycles, alkyl substituted alkanediol,
substituted alkanoic acid, and substituted
alkanediamine, substituted alkanamine-blocked,
compds. with alkylamine.
(G) Urethane acrylate.
(G) Alicyclic polycarboxylic acid, polymer with alkyl
methacrylate,
alkyldiol,
alkyldioic
acid,
polyalkyleneoxide, alkoxy methacrylate, aromatic
heterocyclic
diketone,
aromatic
diisocyanate,
heterocyclic
ketone
and
dialkyleneglycol.
(G) Polyethylene glycol-,alkyl, amine-functionalized
polyurethane.
(G) Polyethylene glycol-,alkyl, amine-functionalized
polyurethane.
(G) Polyethylene glycol-, fatty acid-, alkyl aminefunctionalised polyurethane.
(G) Potassium salt of organic acid.
(G) Mixed salts of organic acid.
(S) 2-furancarboxyaldehyde, 5-(chloromethyl)(G) 1,3-Isobenzofurandione, 5,5′-[2,2,2-trifluoro-1(trifluoromethyl) ethylidene]bis-, polymer with aromatic amines.
(G) Substituted [1,1′-biphenyl].
(S) Modified acrylic polymer.
(G) Cycloaliphatic epoxy.
(G) L-amino acid, homopolymer, carboxylate.
(G) Doped Zirconium Oxide.
(G) Butanedioic acid, alkyl amine, dimethylbutyl
ester.
(S) Amides, coco, n,n-bis(2-hydroxypropyl).
(S) Modified acrylic polymer.
(G) Polyurethane.
(G) Polyurethane polyol.
(G) Alkenoic acid, polymer with substituted
heteromonocycle, substituted carbomonocycle,
2-alkyl-2-hydroxyalkyl-1,3-alkanediol
1alkylalkenyl carbomonocycle, alkali metal salt.
E:\FR\FM\16SEN1.SGM
16SEN1
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
55615
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015—Continued
Received
date
Case No.
Projected
notice end
date
Manufacturer
importer
Chemical use
Chemical identity
(S)
2-Propenoic
acid,
polymer
with
2(chloromethyl)oxirane, ethenylbenzene, 2-ethyl2-(hydroxymethyl)-1,3-propanediol
and
(1methylethenyl)benzene, potassium sodium salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
2oxiranylmethyl 2-methyl-2-propenoate and 1,2propanediol mono(2-methyl-2-propenoate), tertBu ethaneperoxoate-initiated, reaction products
with dihydroxyalkyl sulfide, carboxylic acid salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
2oxiranylmethyl 2-methyl-2-propenoate and 1,2propanediol mono(2-methyl-2-propenoate), tertBu ethaneperoxoate-initiated, reaction products
with hydroxyalkyl amine, carboxylic acid salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
ethenylbenzene, 2-oxiranylmethyl 2-methyl-2propenoate and 1,2-propanediol mono(2-methyl2-propenoate), tert-Bu ethaneperoxoate-initiated,
reaction products with dihydroxyalkyl sulfide,
carboxylic acid salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
ethenylbenzene, 2-oxiranylmethyl 2-methyl-2propenoate and 1,2-propanediol mono(2-methyl2-propenoate), tert-Bu ethaneperoxoate-initiated,
reaction products with hydroxyalkyl amine, carboxylic acid salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
2oxiranylmethyl 2-methyl-2-propenoate and 1,2propanediol mono(2-methyl-2-propenoate), tertBu ethaneperoxoate-initiated, reaction products
with dihydroxyalkyl sulfide, carboxylic acid salt.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer
with
butyl
2-propenoate,
2oxiranylmethyl 2-methyl-2-propenoate and 1,2propanediol mono(2-methyl-2-propenoate), tertBu ethaneperoxoate-initiated, reaction products
with hydroxyalkyl amine, carboxylic acid salt.
(G) Methyl alkaryl methyl hydrogen cyclosiloxanes.
(G) Polyethylene glycol alkyl ether, sodium salt.
7/10/2015
10/8/2015
CBI ...................
(G) Component of inkjet
ink.
P–15–0590 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0591 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0592 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0593 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0594 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0595 .....
7/10/2015
10/8/2015
CBI ...................
(G) Component in an
electrodeposition coating.
P–15–0596 .....
P–15–0597 .....
7/10/2015
7/10/2015
10/8/2015
10/8/2015
CBI ...................
CBI ...................
P–15–0598 .....
7/13/2015
10/11/2015
Allnex USA, Inc
(G) Intermediate .............
(S) Dispersing agent for
use in paints, pigments, and coatings.
(S) Automotive basecoat.
P–15–0599 .....
P–15–0600 .....
P–15–0601 .....
7/13/2015
7/14/2015
7/14/2015
10/11/2015
10/12/2015
10/12/2015
CBI ...................
CBI ...................
CBI ...................
P–15–0602 .....
7/14/2015
10/12/2015
CBI ...................
(G) Adhesive ..................
(G) Plastics additive .......
(G) Fluid loss control additive.
(G) Conductive material
P–15–0603 .....
7/14/2015
10/12/2015
CBI ...................
(G) Conductive material
P–15–0605 .....
asabaliauskas on DSK7TPTVN1PROD with NOTICES
P–15–0589 .....
7/14/2015
10/12/2015
Sasol Chemicals
(USA) LLC.
P–15–0605 .....
7/14/2015
10/12/2015
Sasol Chemicals
(USA) LLC.
P–15–0606 .....
7/14/2015
10/12/2015
Sasol Chemicals
(USA) LLC.
P–15–0607 .....
7/14/2015
10/12/2015
CBI ...................
(S) Chemical intermediate for pour point
depressant production.
(S) Formulation of
defoamers used in the
production of paper.
(S) Chemical intermediate for pour point
depressant production.
(G) Initiator for polymerization.
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
(G) Substituted alkanoic acid, polymer with substituted
polypropylene,
substituted
carbomonocyle, dialkyl carbonate, alkanediol
and substituted carbopolycycle, compd. with
dialkylamino alkanol.
(G) Hetero substituted alkyl acrylate polymer.
(G) Poly(hydroxyalkanoate).
(G) Acrylic-humic acid-based polymer.
(G)
Copolymer
of
tetrafluoroethene
and
Perfluorosulfonylvinylether.
(G)
Copolymer
of
tetrafluoroethene
and
Perfluorosulfonylvinylether.
(S) Alkenes, C18–22, mixed with polyethylene,
oxidized, hydrolyzed, distn. residues, from C16–
18 alcs. manuf.
(S) Alkenes, C18–22, mixed with polyethylene,
oxidized, hydrolyzed, distn. residues, from C16–
18 alcs. manuf.
(S) Alkenes, C18–22, mixed with polyethylene,
oxidized, hydrolyzed, distn. residues, from C20–
22 alcs. manuf.
(G) 1,2,4,5,7,8-Hexoxonane, 3,6,9-trimethyl-,3,6,9tris(alkyl) derivs.
E:\FR\FM\16SEN1.SGM
16SEN1
55616
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015—Continued
Received
date
Case No.
Projected
notice end
date
Manufacturer
importer
Chemical use
(G) Tackifying component of hot melt adhesive and traffic marking formulations.
(G) Industrial Adhesive ..
7/15/2015
10/13/2015
CBI ...................
P–15–0610 .....
7/15/2015
10/13/2015
P–15–0611 .....
7/15/2015
10/13/2015
P–15–0612 .....
7/15/2015
10/13/2015
H.B. Fuller Company.
H.B. Fuller Company.
BrandWatch
Technologies.
P–15–0613 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0614 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0615 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0616 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0617 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0618 .....
7/15/2015
10/13/2015
BrandWatch
Technologies.
P–15–0619 .....
7/16/2015
10/14/2015
CBI ...................
P–15–0620 .....
P–15–0621 .....
P–15–0623 .....
7/17/2015
7/17/2015
7/17/2015
10/15/2015
10/15/2015
10/15/2015
CBI ...................
CBI ...................
CBI ...................
P–15–0624 .....
7/17/2015
10/15/2015
CBI ...................
P–15–0625 .....
7/21/2015
10/19/2015
CBI ...................
(S) Wetting and dispersing additive in industrial and architectural coatings.
(G) Construction material
P–15–0625 .....
7/21/2015
10/19/2015
CBI ...................
(S) Construction fill .........
P–15–0626 .....
7/21/2015
10/19/2015
CBI ...................
(G) Construction material
P–15–0627 .....
7/21/2015
10/19/2015
CBI ...................
(G) Construction material
P–15–0628 .....
asabaliauskas on DSK7TPTVN1PROD with NOTICES
P–15–0608 .....
7/21/2015
10/19/2015
CBI ...................
(G) Construction material
P–15–0630 .....
7/22/2015
10/20/2015
CBI ...................
(S) Epoxy curing agent ..
P–15–0632 .....
P–15–0633 .....
7/22/2015
7/23/2015
10/20/2015
10/21/2015
CBI ...................
Firmenich, Inc ...
P–15–0634 .....
7/23/2015
10/21/2015
Firmenich, Inc. ..
(S) Salt for polymer ........
(G) As part of a fragrance formula (dispersive use).
(G) As part of a fragrance formula.
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
PO 00000
Frm 00029
(G) Industrial Adhesive ..
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Additive for brand
protection and anticounterfeiting inks and
polymers.
(S) Tackifier in traffic
striping preform formulations.
(G) Catalyst ....................
(G) Additive for plastics ..
(G) Epoxy hardener .......
Fmt 4703
Sfmt 4703
Chemical identity
(G) Modified rosin polyol ester.
(G) Aliphatic isocyanate with polyalkylene carbonate diol and 2-hea.
(G) Aliphatic isocyanate with polyalkylene carbonate diol and 4-hba.
(S) Sulfur thulium ytterbium yttrium oxide.
(S) Gadolinium sulfur ytterbium yttrium oxide,
erbium- and thulium-doped.
(S) Neodymium sulfur yttrium oxide.
(S) Erbium gadolinium neodymium sulfur ytterbium
yttrium oxide.
(S) Erbium gadolinium sulfur ytterbium yttrium
oxide.
(S) Erbium gadolinium ytterbium oxide.
(S) Erbium gadolinium sulfur ytterbium oxide.
(G) Modified rosin polyol esters.
(G) Doped zirconium oxide.
(G) Aromatic polyester.
(G) Nutshell liquid, polymer with alkylenediamine
and formaldehyde, reaction products with phenol, 4,4′-(1-methylethylidene)bis-, polymer with
2-(chloromethyl)oxirane and fatty acids, polymers with polyalkylenepolyamine.
(S) Modified urethane polymer.
(G) Naturally occurring minerals, reaction products
with hetero substituted alkyl acrylate polymer.
(G) Naturally occurring minerals, reaction products
with hetero substituted alkyl acrylate polymer.
(G) Naturally occurring minerals, reaction products
with hetero substituted alkyl acrylate polymer.
(G) Naturally occurring minerals, reaction products
with hetero substituted alkyl acrylate polymer.
(G) Naturally occurring minerals, reaction products
with hetero substituted alkyl acrylate polymer.
(G) 2-Ethylhexanoic acid, compound with
alkyamino cyclohexane.
(G) Mixed amine salt.
(S) 1(2H)-Naphthalenone,4-ethyloctahydro-8-methyl.
(S)
Reaction
mass
of
(3E)-4-(2,6,6trimethylcyclohex-1 or 2-en-1-yl)but-3-en-2-one
and
4-(dodecylsulfanyl)-4-(2,6,6trimethylcyclohex-1 or 2 -en-1-yl)butan-2-one.
E:\FR\FM\16SEN1.SGM
16SEN1
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
55617
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015—Continued
Projected
notice end
date
Received
date
Case No.
Manufacturer
importer
Chemical use
Chemical identity
(G) In electronics, adhesives, and coatings
manufacture, or
derivitized for these
applications.
(S) Fragrance in household products.
(S) Fragrance in a fine
fragrance.
(S) Fragrance in consumer products.
(G) 100% Solids Epoxy
hardener for water
borne epoxy coating
formulations.
(G) UV cured coatings
and inks.
(S) Research ..................
(S) Conversion to an
aminofunctional
organosilane at Gelest
for export—subject of
GLS226.
(S) Research ..................
(G) Polymer of an aromatic olefin and one or more
substituted aromatic olefins.
P–15–0635 .....
7/23/2015
10/21/2015
CBI ...................
P–15–0637 .....
7/24/2015
10/22/2015
Takasago ..........
P–15–0637 .....
7/24/2015
10/22/2015
Takasago ..........
P–15–0637 .....
7/24/2015
10/22/2015
Takasago ..........
P–15–0638 .....
7/24/2015
10/22/2015
Cardolite Corporation.
P–15–0645 .....
7/27/2015
10/25/2015
CBI ...................
P–15–0646 .....
P–15–0646 .....
7/27/2015
7/27/2015
10/25/2015
10/25/2015
Gelest ...............
Gelest ...............
P–15–0647 .....
7/27/2015
10/25/2015
Gelest ...............
P–15–0647 .....
7/27/2015
10/25/2015
Gelest ...............
P–15–0648 .....
P–15–0649 .....
7/27/2015
7/28/2015
10/25/2015
10/26/2015
CBI ...................
CBI ...................
P–15–0651 .....
7/28/2015
10/26/2015
CBI ...................
P–15–0652
P–15–0653
P–15–0654
P–15–0655
.....
.....
.....
.....
7/28/2015
7/28/2015
7/29/2015
7/29/2015
10/26/2015
10/26/2015
10/27/2015
10/27/2015
CBI
CBI
CBI
CBI
...................
...................
...................
...................
(S) Specialty adhesion
promoter—to be carried out in an Asian
country.
(G) Raw material ............
(G) Additive, open, nondispersive use.
(G) Additive, open, nondispersive use.
(G) Polymer for coatings
(G) Coating .....................
(G) Coating .....................
(S) Epoxy curing agent ..
P–15–0655 .....
7/29/2015
10/27/2015
CBI ...................
(S) Epoxy curing agent ..
P–15–0657 .....
7/30/2015
10/28/2015
CBI ...................
(G) Intermediate .............
For the NOCs received by EPA during
this period, Table 2 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
NOC; the date the NOC was received by
((S) Cyclopropanemethanol, a,1-dimethyl-2-(1phenylethyl)-.
(S)
Cyclopropanemethanol,
a,1-dimethyl-2-(1phenylethyl)-.
(S)
Cyclopropanemethanol,
a,1-dimethyl-2-(1phenylethyl)-.
(G) Cashew nutshell liquid polymer with
epichlorhydrin, formaldehyde, phenol, amines
and glycol.
(G) Urethane acrylate.
(S) Silane, (3-chloropropyl)diethoxymethyl-.
(S) Silane, (3-chloropropyl)diethoxymethyl-.
(S) Propanamine, 3-(diethoxymethylsilyl)-N-[3(diethoxymethylsilyl)propyl]-N-methyl-.
(S) Propanamine, 3-(diethoxymethylsilyl)-N-[3(diethoxymethylsilyl)propyl]-N-methyl-.
(G) Alkylamino alcohol.
(G) Polyether modified epoxy resin.
(G) Siloxanes and silicones, di methyl, polyether
modified.
(G) Amine salted polyurethane.
(G) Cycloaliphatic epoxide.
(G) Cycloaliphatic epoxide.
(G) 2-Ethylhexanoic acid, compound with
alkyamino cyclohexane.
(G) 2-Ethylhexanoic acid, compound with cyclohexylamine.
(G) Allyl triazine oligomer.
EPA; the commencement date provided
by the submitter in the NOC; and the
chemical identity. As used in the table,
(S) is used to indicate that the
information provided in the table is the
specific information provided by the
submitter, and (G) is used to indicate
that the information provided in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
TABLE 2—STATUS OF THE 23 NOCS RECEIVED FROM JULY 1, 2015 TO JULY 10, 2015
Case No.
Received date
Commencement date
asabaliauskas on DSK7TPTVN1PROD with NOTICES
P–07–0621 .....
P–09–0516 .....
7/10/2015
7/30/2015
6/28/2015
7/23/2015
P–12–0414
P–13–0252
P–13–0252
P–13–0752
P–14–0669
P–14–0804
P–15–0189
7/15/2015
7/24/2015
7/24/2015
7/2/2015
7/6/2015
7/10/2015
7/16/2015
7/9/2015
7/9/2015
7/9/2015
7/1/2015
7/1/2015
7/9/2015
6/29/2015
.....
.....
.....
.....
.....
.....
.....
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
PO 00000
Chemical identity
(G) Butanedioic acid, 2,3-dihydroxy-, mixed diesters, (2r, 3r)-rel-.
(G) Fatty acids, c16-18 and c18-unsatd., polymer with alkyldioic acid, cycloalkylamine, aromatic diol, c18-unsatd. fatty acid dimers, epichlorohydrin, aromatic acid and
triethylenetetramine.
(S) 2-Propenoic acid, (2-ethyl-2-methyl-1,3-dioxolan-4-yl)methyl ester.
(S) Mixture of 4,7-methano-1h-inden-5-ol, octahydro-2,4,5-trimethyl-.
(S) Mixture of 4,7-methano-1h-inden-5-ol, octahydro-3,4,5-trimethyl-.
(G) Substituted polyethylene glycol monomethy ether.
(G) Polyamine carboxyalkyl derivatives, sodium salts.
(S) Phosphoric acid, sodium titanium (4+) salt (3:1:2).
(G) Alkane carboxylic acid ester with alkanepolyol.
Frm 00030
Fmt 4703
Sfmt 4703
E:\FR\FM\16SEN1.SGM
16SEN1
55618
Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
TABLE 2—STATUS OF THE 23 NOCS RECEIVED FROM JULY 1, 2015 TO JULY 10, 2015—Continued
Case No.
Received date
Commencement date
P–15–0192 .....
7/7/2015
6/21/2015
P–15–0193 .....
7/7/2015
6/21/2015
P–15–0201 .....
P–15–0204 .....
7/7/2015
7/7/2015
6/21/2015
6/21/2015
P–15–0253 .....
P–15–0263 .....
P–15–0273 .....
7/7/2015
7/14/2015
7/13/2015
6/9/2015
6/22/2015
7/8/2015
P–15–0281 .....
7/13/2015
7/10/2015
P–15–0328
P–15–0330
P–15–0332
P–15–0337
P–15–0338
P–15–0370
7/17/2015
7/30/2015
7/10/2015
7/27/2015
7/22/2015
7/7/2015
6/18/2015
7/18/2015
7/7/2015
7/15/2015
7/14/2015
7/4/2015
.....
.....
.....
.....
.....
.....
Authority: 15 U.S.C. 2601 et seq.
Dated: September 9, 2015.
Chi Tran, Acting,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2015–23297 Filed 9–15–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–RCRA–2015–0605, FRL–9934–18–
OSWER]
Agency Information Collection
Activities; Proposed Collection;
Comment Request; Standardized
Permit for RCRA Hazardous Waste
Management Facilities
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) is planning to submit an
information collection request (ICR),
Standardized Permit for RCRA
Hazardous Waste Management Facilities
(EPA ICR No. 1935.05, OMB Control No.
2050–0182) to the Office of Management
and Budget (OMB) for review and
approval in accordance with the
Paperwork Reduction Act (PRA) (44
U.S.C. 3501 et seq.). Before doing so, the
EPA is soliciting public comments on
specific aspects of the proposed
information collection as described
below. This is a proposed extension of
the ICR, which is currently approved
through January 31, 2016. An Agency
may not conduct or sponsor and a
person is not required to respond to a
asabaliauskas on DSK7TPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:18 Sep 15, 2015
Jkt 235001
Chemical identity
(G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxysilane and mixed metal oxides.
(G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxysilane and mixed metal oxides.
(G) Methacrylate alkyl trialkoxysilane, reaction products with mixed metal oxides.
(G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxy silane and mixed metal oxides.
(G) Organometallic, reaction product with titanium salt, zirconium metallocene and silica.
(G) Ethylene vinyl acetate polymer.
(S) Glycolipids, sophorose-contg., candida bombicola-fermented, from d-glucose and
mahua madhuca longifolia fats and glyceridic oils.
(G) Alkyl substituted alkanoic acid, polymer with substituted carbomonocycle, alkyl substituted alkenoate, alkanediol mono-alkyl substituted alkenoate and alkenoic acid, substituted alkyl ester, alkylperoxoate-initiated, compds. with alkylamino alkanol.
(G) Aluminum calcium oxide salt.
(G) Diphenylcyclic siloxane.
(G) Linear siloxane.
(G) Amino silane.
(S) Decanedioic acid, 1,10-diisotridecyl ester.
(G) Alcohols, polymers with dicarboxylic acid, alcohols, alkenedioic acid, dicarboxylic
acids, alkanoic acid esters.
collection of information unless it
displays a currently valid OMB control
number.
DATES: Comments must be submitted on
or before November 16, 2015.
ADDRESSES: Submit your comments,
referencing by Docket ID No. EPA–HQ–
RCRA–2015–0605, online using
www.regulations.gov (our preferred
method), by email to rcra-docket@
epa.gov, or by mail to: EPA Docket
Center, Environmental Protection
Agency, Mail Code 28221T, 1200
Pennsylvania Ave. NW., Washington,
DC 20460.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT: Jeff
Gaines, Office of Resource Conservation
and Recovery, (5303P), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460;
telephone number: 703–308–8655; fax
number: 703–308–8617; email address:
gaines.jeff@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents which explain
in detail the information the EPA will
be collecting are available in the public
docket for this ICR. The docket can be
viewed online at www.regulations.gov
or in person at the EPA Docket Center,
WJC West, Room 3334, 1301
Constitution Ave. NW., Washington,
DC. The telephone number for the
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
Docket Center is 202–566–1744. For
additional information about EPA’s
public docket, visit https://www.epa.gov/
dockets.
Pursuant to section 3506(c)(2)(A) of
the PRA, the EPA is soliciting comments
and information to enable it to: (i)
Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the Agency, including
whether the information will have
practical utility; (ii) evaluate the
accuracy of the Agency’s estimate of the
burden of the proposed collection of
information, including the validity of
the methodology and assumptions used;
(iii) enhance the quality, utility, and
clarity of the information to be
collected; and (iv) minimize the burden
of the collection of information on those
who are to respond, including through
the use of appropriate automated
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses. The EPA will consider the
comments received and amend the ICR
as appropriate. The final ICR package
will then be submitted to OMB for
review and approval. At that time, the
EPA will issue another Federal Register
notice to announce the submission of
the ICR to OMB and the opportunity to
submit additional comments to OMB.
Abstract: Under the authority of
sections 3004, 3005, 3008 and 3010 of
the Resource Conservation and
Recovery Act (RCRA), as amended, EPA
revised the RCRA hazardous waste
permitting program to allow a
E:\FR\FM\16SEN1.SGM
16SEN1
]]>Agencies
[Federal Register Volume 80, Number 179 (Wednesday, September 16, 2015)]
[Notices]
[Pages 55613-55618]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-23297]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2015-0502; FRL-9933-34]
Certain New Chemicals; Receipt and Status Information for July
2015
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from July 1, 2015 to July 30, 2015.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before October 16, 2015.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0502, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from July 1, 2015 to July 30, 2015, and consists of the PMNs and
TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
For the PMNs received by EPA during this period, Table 1 provides
the following information (to the extent that such information is not
claimed as CBI): The EPA case number assigned to the PMN; the date the
PMN was received by EPA; the projected end date for EPA's review of the
PMN; the submitting
[[Page 55614]]
manufacturer/importer; the potential uses identified by the
manufacturer/importer in the PMN; and the chemical identity. As used in
the table, (S) is used to indicate that the information provided in the
table is the specific information provided by the submitter, and (G) is
used to indicate that the information provided in the table is generic
information because the specific information provided by the submitter
was claimed as CBI.
Table 1--Status of the 85 PMNs Received From July 1 to July 30, 2015
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received notice end Manufacturer importer Chemical use Chemical identity
date date
----------------------------------------------------------------------------------------------------------------
P-15-0564........... 7/1/2015 9/29/2015 CBI................... (G) Polymer (G) Graft copolymer
intermediate of polyolefin and
used in polyamide.
extrusion and
moulding.
P-15-0565........... 7/1/2015 9/29/2015 CBI................... (G) Chemical (G) Polymeric
intermediate. products of
reactions of epoxy
with organic acid
and acrylic
monomers, partially
neutralized with
dimethyl
ethanolamine.
P-15-0566........... 7/1/2015 9/29/2015 Allnex USA, Inc....... (S) Thickener for (G) Alkanedioic acid,
waterborne polymer with
industrial substituted
coatings. carbomonocycles,
alkyl substituted
alkanediol,
substituted alkanoic
acid, and
substituted
alkanediamine,
substituted
alkanamine-blocked,
compds. with
alkylamine.
P-15-0567........... 7/1/2015 9/29/2015 CBI................... (G) UV cured (G) Urethane
coatings and acrylate.
inks.
P-15-0568........... 7/1/2015 9/29/2015 DIC International (G) Adhesives.... (G) Alicyclic
(USA) LLC. polycarboxylic acid,
polymer with alkyl
methacrylate,
alkyldiol,
alkyldioic acid,
polyalkyleneoxide,
alkoxy methacrylate,
aromatic
heterocyclic
diketone, aromatic
diisocyanate,
heterocyclic ketone
and
dialkyleneglycol.
P-15-0569........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene
dispersion glycol-,alkyl, amine-
additive for functionalized
paint and polyurethane.
coating industry.
P-15-0569........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene
Dispersion glycol-,alkyl, amine-
additive for functionalized
pigment polyurethane.
manufacturers.
P-15-0570........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene
Dispersion glycol-, fatty acid-
additive for , alkyl amine-
pigment functionalised
manufacturers. polyurethane.
P-15-0571........... 7/2/2015 9/30/2015 CBI................... (S) Raw material (G) Potassium salt of
used in the organic acid.
manufacture of
lubricants.
P-15-0572........... 7/2/2015 9/30/2015 CBI................... (S) Raw material (G) Mixed salts of
used in the organic acid.
manufacture of
lubricants.
P-15-0573........... 7/6/2015 10/4/2015 XF Technologies....... (S) Chemical (S) 2-
intermediate for furancarboxyaldehyde
xF production. , 5-(chloromethyl)-
P-15-0574........... 7/7/2015 10/5/2015 CBI................... (G) Separation (G) 1,3-
membrane. Isobenzofurandione,
5,5'-[2,2,2-
trifluoro-1-
(trifluoromethyl)
ethylidene]bis-,
polymer with
aromatic amines.
P-15-0575........... 7/7/2015 10/5/2015 CBI................... (G) Monomer for a (G) Substituted [1,1'-
polymer. biphenyl].
P-15-0576........... 7/7/2015 10/5/2015 CBI................... (S) Additive/ (S) Modified acrylic
deflocculant for polymer.
water-based
decorative and
industrial
paints.
P-15-0580........... 7/7/2015 10/5/2015 CBI................... (G) Coating...... (G) Cycloaliphatic
epoxy.
P-15-0581........... 7/7/2015 10/5/2015 CBI................... (G) Oilfield (G) L-amino acid,
chemical homopolymer,
additive. carboxylate.
P-15-0582........... 7/8/2015 10/6/2015 CBI................... (G) Intermediate. (G) Doped Zirconium
Oxide.
P-15-0583........... 7/8/2015 10/6/2015 CBI................... (G) Lubricant (G) Butanedioic acid,
additive. alkyl amine,
dimethylbutyl ester.
P-15-0584........... 7/8/2015 10/6/2015 The Lewis Chemical (S) Foaming agent (S) Amides, coco, n,n-
Company. in industrial or bis(2-
hard surface hydroxypropyl).
cleaners.
P-15-0585........... 7/9/2015 10/7/2015 CBI................... (S) Additive/ (S) Modified acrylic
deflocculant for polymer.
water-based
decorative and
industrial
paints.
P-15-0586........... 7/9/2015 10/7/2015 Bostik, Inc........... (G) Adhesive..... (G) Polyurethane.
P-15-0587........... 7/9/2015 10/7/2015 Bostik, Inc........... (G) Adhesive..... (G) Polyurethane
polyol.
P-15-0588........... 7/10/2015 10/8/2015 CBI................... (G) Component of (G) Alkenoic acid,
inkjet ink. polymer with
substituted
heteromonocycle,
substituted
carbomonocycle, 2-
alkyl-2-hydroxyalkyl-
1,3-alkanediol 1-
alkylalkenyl
carbomonocycle,
alkali metal salt.
[[Page 55615]]
P-15-0589........... 7/10/2015 10/8/2015 CBI................... (G) Component of (S) 2-Propenoic acid,
inkjet ink. polymer with 2-
(chloromethyl)oxiran
e, ethenylbenzene, 2-
ethyl-2-
(hydroxymethyl)-1,3-
propanediol and (1-
methylethenyl)benzen
e, potassium sodium
salt.
P-15-0590........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
2-oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
dihydroxyalkyl
sulfide, carboxylic
acid salt.
P-15-0591........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
2-oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
hydroxyalkyl amine,
carboxylic acid
salt.
P-15-0592........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
ethenylbenzene, 2-
oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
dihydroxyalkyl
sulfide, carboxylic
acid salt.
P-15-0593........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
ethenylbenzene, 2-
oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
hydroxyalkyl amine,
carboxylic acid
salt.
P-15-0594........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
2-oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
dihydroxyalkyl
sulfide, carboxylic
acid salt.
P-15-0595........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid,
an 2-methyl-, methyl
electrodepositio ester, polymer with
n coating. butyl 2-propenoate,
2-oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-Bu
ethaneperoxoate-
initiated, reaction
products with
hydroxyalkyl amine,
carboxylic acid
salt.
P-15-0596........... 7/10/2015 10/8/2015 CBI................... (G) Intermediate. (G) Methyl alkaryl
methyl hydrogen
cyclosiloxanes.
P-15-0597........... 7/10/2015 10/8/2015 CBI................... (S) Dispersing (G) Polyethylene
agent for use in glycol alkyl ether,
paints, sodium salt.
pigments, and
coatings.
P-15-0598........... 7/13/2015 10/11/2015 Allnex USA, Inc....... (S) Automotive (G) Substituted
basecoat.. alkanoic acid,
polymer with
substituted
polypropylene,
substituted
carbomonocyle,
dialkyl carbonate,
alkanediol and
substituted
carbopolycycle,
compd. with
dialkylamino
alkanol.
P-15-0599........... 7/13/2015 10/11/2015 CBI................... (G) Adhesive..... (G) Hetero
substituted alkyl
acrylate polymer.
P-15-0600........... 7/14/2015 10/12/2015 CBI................... (G) Plastics (G)
additive. Poly(hydroxyalkanoat
e).
P-15-0601........... 7/14/2015 10/12/2015 CBI................... (G) Fluid loss (G) Acrylic-humic
control additive. acid-based polymer.
P-15-0602........... 7/14/2015 10/12/2015 CBI................... (G) Conductive (G) Copolymer of
material. tetrafluoroethene
and
Perfluorosulfonylvin
ylether.
P-15-0603........... 7/14/2015 10/12/2015 CBI................... (G) Conductive (G) Copolymer of
material. tetrafluoroethene
and
Perfluorosulfonylvin
ylether.
P-15-0605........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Chemical (S) Alkenes, C18-22,
LLC. intermediate for mixed with
pour point polyethylene,
depressant oxidized,
production. hydrolyzed, distn.
residues, from C16-
18 alcs. manuf.
P-15-0605........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Formulation (S) Alkenes, C18-22,
LLC. of defoamers mixed with
used in the polyethylene,
production of oxidized,
paper. hydrolyzed, distn.
residues, from C16-
18 alcs. manuf.
P-15-0606........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Chemical (S) Alkenes, C18-22,
LLC. intermediate for mixed with
pour point polyethylene,
depressant oxidized,
production. hydrolyzed, distn.
residues, from C20-
22 alcs. manuf.
P-15-0607........... 7/14/2015 10/12/2015 CBI................... (G) Initiator for (G) 1,2,4,5,7,8-
polymerization. Hexoxonane, 3,6,9-
trimethyl-,3,6,9-
tris(alkyl) derivs.
[[Page 55616]]
P-15-0608........... 7/15/2015 10/13/2015 CBI................... (G) Tackifying (G) Modified rosin
component of hot polyol ester.
melt adhesive
and traffic
marking
formulations.
P-15-0610........... 7/15/2015 10/13/2015 H.B. Fuller Company... (G) Industrial (G) Aliphatic
Adhesive. isocyanate with
polyalkylene
carbonate diol and 2-
hea.
P-15-0611........... 7/15/2015 10/13/2015 H.B. Fuller Company... (G) Industrial (G) Aliphatic
Adhesive. isocyanate with
polyalkylene
carbonate diol and 4-
hba.
P-15-0612........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Sulfur thulium
Technologies. brand protection ytterbium yttrium
and anti- oxide.
counterfeiting
inks and
polymers.
P-15-0613........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Gadolinium sulfur
Technologies. brand protection ytterbium yttrium
and anti- oxide, erbium- and
counterfeiting thulium-doped.
inks and
polymers.
P-15-0614........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Neodymium sulfur
Technologies. brand protection yttrium oxide.
and anti-
counterfeiting
inks and
polymers.
P-15-0615........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium
Technologies. brand protection neodymium sulfur
and anti- ytterbium yttrium
counterfeiting oxide.
inks and
polymers.
P-15-0616........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium
Technologies. brand protection sulfur ytterbium
and anti- yttrium oxide.
counterfeiting
inks and
polymers.
P-15-0617........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium
Technologies. brand protection ytterbium oxide.
and anti-
counterfeiting
inks and
polymers.
P-15-0618........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium
Technologies. brand protection sulfur ytterbium
and anti- oxide.
counterfeiting
inks and
polymers.
P-15-0619........... 7/16/2015 10/14/2015 CBI................... (S) Tackifier in (G) Modified rosin
traffic striping polyol esters.
preform
formulations.
P-15-0620........... 7/17/2015 10/15/2015 CBI................... (G) Catalyst..... (G) Doped zirconium
oxide.
P-15-0621........... 7/17/2015 10/15/2015 CBI................... (G) Additive for (G) Aromatic
plastics. polyester.
P-15-0623........... 7/17/2015 10/15/2015 CBI................... (G) Epoxy (G) Nutshell liquid,
hardener. polymer with
alkylenediamine and
formaldehyde,
reaction products
with phenol, 4,4'-(1-
methylethylidene)bis-
, polymer with 2-
(chloromethyl)oxiran
e and fatty acids,
polymers with
polyalkylenepolyamin
e.
P-15-0624........... 7/17/2015 10/15/2015 CBI................... (S) Wetting and (S) Modified urethane
dispersing polymer.
additive in
industrial and
architectural
coatings.
P-15-0625........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally
material. occurring minerals,
reaction products
with hetero
substituted alkyl
acrylate polymer.
P-15-0625........... 7/21/2015 10/19/2015 CBI................... (S) Construction (G) Naturally
fill. occurring minerals,
reaction products
with hetero
substituted alkyl
acrylate polymer.
P-15-0626........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally
material. occurring minerals,
reaction products
with hetero
substituted alkyl
acrylate polymer.
P-15-0627........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally
material. occurring minerals,
reaction products
with hetero
substituted alkyl
acrylate polymer.
P-15-0628........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally
material. occurring minerals,
reaction products
with hetero
substituted alkyl
acrylate polymer.
P-15-0630........... 7/22/2015 10/20/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic
agent. acid, compound with
alkyamino
cyclohexane.
P-15-0632........... 7/22/2015 10/20/2015 CBI................... (S) Salt for (G) Mixed amine salt.
polymer.
P-15-0633........... 7/23/2015 10/21/2015 Firmenich, Inc........ (G) As part of a (S) 1(2H)-
fragrance Naphthalenone,4-
formula ethyloctahydro-8-
(dispersive use). methyl.
P-15-0634........... 7/23/2015 10/21/2015 Firmenich, Inc........ (G) As part of a (S) Reaction mass of
fragrance (3E)-4-(2,6,6-
formula. trimethylcyclohex-1
or 2-en-1-yl)but-3-
en-2-one and 4-
(dodecylsulfanyl)-4-
(2,6,6-
trimethylcyclohex-1
or 2 -en-1-yl)butan-
2-one.
[[Page 55617]]
P-15-0635........... 7/23/2015 10/21/2015 CBI................... (G) In (G) Polymer of an
electronics, aromatic olefin and
adhesives, and one or more
coatings substituted aromatic
manufacture, or olefins.
derivitized for
these
applications.
P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in ((S)
household Cyclopropanemethanol
products. , a,1-dimethyl-2-(1-
phenylethyl)-.
P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in (S)
a fine fragrance. Cyclopropanemethanol
, a,1-dimethyl-2-(1-
phenylethyl)-.
P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in (S)
consumer Cyclopropanemethanol
products. , a,1-dimethyl-2-(1-
phenylethyl)-.
P-15-0638........... 7/24/2015 10/22/2015 Cardolite Corporation. (G) 100% Solids (G) Cashew nutshell
Epoxy hardener liquid polymer with
for water borne epichlorhydrin,
epoxy coating formaldehyde,
formulations. phenol, amines and
glycol.
P-15-0645........... 7/27/2015 10/25/2015 CBI................... (G) UV cured (G) Urethane
coatings and acrylate.
inks.
P-15-0646........... 7/27/2015 10/25/2015 Gelest................ (S) Research..... (S) Silane, (3-
chloropropyl)diethox
ymethyl-.
P-15-0646........... 7/27/2015 10/25/2015 Gelest................ (S) Conversion to (S) Silane, (3-
an chloropropyl)diethox
aminofunctional ymethyl-.
organosilane at
Gelest for
export--subject
of GLS226.
P-15-0647........... 7/27/2015 10/25/2015 Gelest................ (S) Research..... (S) Propanamine, 3-
(diethoxymethylsilyl
)-N-[3-
(diethoxymethylsilyl
)propyl]-N-methyl-.
P-15-0647........... 7/27/2015 10/25/2015 Gelest................ (S) Specialty (S) Propanamine, 3-
adhesion (diethoxymethylsilyl
promoter--to be )-N-[3-
carried out in (diethoxymethylsilyl
an Asian country. )propyl]-N-methyl-.
P-15-0648........... 7/27/2015 10/25/2015 CBI................... (G) Raw material. (G) Alkylamino
alcohol.
P-15-0649........... 7/28/2015 10/26/2015 CBI................... (G) Additive, (G) Polyether
open, non- modified epoxy
dispersive use. resin.
P-15-0651........... 7/28/2015 10/26/2015 CBI................... (G) Additive, (G) Siloxanes and
open, non- silicones, di
dispersive use. methyl, polyether
modified.
P-15-0652........... 7/28/2015 10/26/2015 CBI................... (G) Polymer for (G) Amine salted
coatings. polyurethane.
P-15-0653........... 7/28/2015 10/26/2015 CBI................... (G) Coating...... (G) Cycloaliphatic
epoxide.
P-15-0654........... 7/29/2015 10/27/2015 CBI................... (G) Coating...... (G) Cycloaliphatic
epoxide.
P-15-0655........... 7/29/2015 10/27/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic
agent. acid, compound with
alkyamino
cyclohexane.
P-15-0655........... 7/29/2015 10/27/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic
agent. acid, compound with
cyclohexylamine.
P-15-0657........... 7/30/2015 10/28/2015 CBI................... (G) Intermediate. (G) Allyl triazine
oligomer.
----------------------------------------------------------------------------------------------------------------
For the NOCs received by EPA during this period, Table 2 provides
the following information (to the extent that such information is not
claimed as CBI): The EPA case number assigned to the NOC; the date the
NOC was received by EPA; the commencement date provided by the
submitter in the NOC; and the chemical identity. As used in the table,
(S) is used to indicate that the information provided in the table is
the specific information provided by the submitter, and (G) is used to
indicate that the information provided in the table is generic
information because the specific information provided by the submitter
was claimed as CBI.
Table 2--Status of the 23 NOCs Received From July 1, 2015 to July 10, 2015
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date Chemical identity
----------------------------------------------------------------------------------------------------------------
P-07-0621............................ 7/10/2015 6/28/2015 (G) Butanedioic acid, 2,3-dihydroxy-,
mixed diesters, (2r, 3r)-rel-.
P-09-0516............................ 7/30/2015 7/23/2015 (G) Fatty acids, c16-18 and c18-
unsatd., polymer with alkyldioic acid,
cycloalkylamine, aromatic diol, c18-
unsatd. fatty acid dimers,
epichlorohydrin, aromatic acid and
triethylenetetramine.
P-12-0414............................ 7/15/2015 7/9/2015 (S) 2-Propenoic acid, (2-ethyl-2-methyl-
1,3-dioxolan-4-yl)methyl ester.
P-13-0252............................ 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5-
ol, octahydro-2,4,5-trimethyl-.
P-13-0252............................ 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5-
ol, octahydro-3,4,5-trimethyl-.
P-13-0752............................ 7/2/2015 7/1/2015 (G) Substituted polyethylene glycol
monomethy ether.
P-14-0669............................ 7/6/2015 7/1/2015 (G) Polyamine carboxyalkyl derivatives,
sodium salts.
P-14-0804............................ 7/10/2015 7/9/2015 (S) Phosphoric acid, sodium titanium
(4+) salt (3:1:2).
P-15-0189............................ 7/16/2015 6/29/2015 (G) Alkane carboxylic acid ester with
alkanepolyol.
[[Page 55618]]
P-15-0192............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane and mixed
metal oxides.
P-15-0193............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxysilane and mixed
metal oxides.
P-15-0201............................ 7/7/2015 6/21/2015 (G) Methacrylate alkyl trialkoxysilane,
reaction products with mixed metal
oxides.
P-15-0204............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane,
reaction products with epoxy modified
cyclohexyl trialkoxy silane and mixed
metal oxides.
P-15-0253............................ 7/7/2015 6/9/2015 (G) Organometallic, reaction product
with titanium salt, zirconium
metallocene and silica.
P-15-0263............................ 7/14/2015 6/22/2015 (G) Ethylene vinyl acetate polymer.
P-15-0273............................ 7/13/2015 7/8/2015 (S) Glycolipids, sophorose-contg.,
candida bombicola-fermented, from d-
glucose and mahua madhuca longifolia
fats and glyceridic oils.
P-15-0281............................ 7/13/2015 7/10/2015 (G) Alkyl substituted alkanoic acid,
polymer with substituted
carbomonocycle, alkyl substituted
alkenoate, alkanediol mono-alkyl
substituted alkenoate and alkenoic
acid, substituted alkyl ester,
alkylperoxoate-initiated, compds. with
alkylamino alkanol.
P-15-0328............................ 7/17/2015 6/18/2015 (G) Aluminum calcium oxide salt.
P-15-0330............................ 7/30/2015 7/18/2015 (G) Diphenylcyclic siloxane.
P-15-0332............................ 7/10/2015 7/7/2015 (G) Linear siloxane.
P-15-0337............................ 7/27/2015 7/15/2015 (G) Amino silane.
P-15-0338............................ 7/22/2015 7/14/2015 (S) Decanedioic acid, 1,10-
diisotridecyl ester.
P-15-0370............................ 7/7/2015 7/4/2015 (G) Alcohols, polymers with
dicarboxylic acid, alcohols,
alkenedioic acid, dicarboxylic acids,
alkanoic acid esters.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: September 9, 2015.
Chi Tran, Acting,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2015-23297 Filed 9-15-15; 8:45 am]
BILLING CODE 6560-50-P
