Foreign-Trade Zone (FTZ) 133-Quad-Cities, Iowa/Illinois; Notification of Proposed Production Activity; CNH Industrial America, LLC; Subzone 133E, (Agricultural and Construction Equipment, Subassemblies and Kits), Burlington and West Burlington, Iowa, 54519-54520 [2015-22853]
Download as PDF
Federal Register / Vol. 80, No. 175 / Thursday, September 10, 2015 / Notices
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–58–2015]
mstockstill on DSK4VPTVN1PROD with NOTICES
Foreign-Trade Zone (FTZ) 133—QuadCities, Iowa/Illinois; Notification of
Proposed Production Activity; CNH
Industrial America, LLC; Subzone
133E, (Agricultural and Construction
Equipment, Subassemblies and Kits),
Burlington and West Burlington, Iowa
CNH Industrial America, LLC (CNH),
operator of Subzone 133E, submitted a
notification of proposed production
activity to the FTZ Board for its
facilities located within Subzone 133E
at sites in Burlington and West
Burlington, Iowa. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on September 2,
2015.
The CNH facilities are used for the
production and distribution of
agricultural and construction
equipment, subassemblies and kits.
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status materials and components
and specific finished products described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt CNH from customs duty
payments on the foreign-status
components used in export production.
On its domestic sales, CNH would be
able to choose the duty rates during
customs entry procedures that apply to
decal kits; toolbox kits; air conditioner
kits; air conditioner service kits;
forklifts; crawler dozers; tractor loaders;
tractor loader backhoes; tractor loader
backhoe assemblies and attachments
(shafts, hook assemblies, buckets, shaft
masts); cabs units; forklifts; cab service
kits; valve service kits; engine hoods;
loaders; bucket arms; boom and dipper
assemblies; link assemblies; crawler
dozer frames with tracks; axle
assemblies; cab assemblies; draper,
auger, and corn headers; bucket service
kits; strippers for combine headers;
wheel mount assemblies; combine
header service kits; combine header arm
assemblies, frames, and floors; locking
tabs; reel tine flap kits; header dividers;
hydraulic valve kits; valve part kits;
beacon kits; relay voltage kits; electrical
control kits; programmable controller
kits; electrical service kits; and ignition
wire service kits (duty rates range from
duty-free to 5.8%) for the foreign-status
inputs noted below. Customs duties also
could possibly be deferred or reduced
on foreign-status production equipment.
VerDate Sep<11>2014
17:28 Sep 09, 2015
Jkt 235001
The components and materials
sourced from abroad include: Articles of
plastic (hoses; hose assemblies; shields;
tubes without fittings; non-reinforced
tubes, pipes and hoses with fittings;
reinforced tubes, pipes and hoses with
fittings; caution decals; insulators; fuel
caps; steering wheel knobs; handles;
spacers; tool boxes; joints; insulators;
clamps; clips; retainers; strips; trim;
seals; washers; and gaskets); articles of
rubber (gaskets; insulation; pads;
weather strips and sheets; weather strip
profile shapes; insulation; nonreinforced elbows; tubes; and hoses
without fittings; metal reinforced hose
and hose assemblies without fittings;
metal reinforced hoses; hose assemblies
and tubes with fittings; textile
reinforced rubber hoses; hose
assemblies and sleeves without fittings;
textile reinforced flexible hoses; air
conditioner hoses; hose assemblies with
fittings; reinforced (other materials) air
hoses; flexible hoses; hydraulic hoses;
alternator hoses and hose assemblies
without fittings; reinforced (other
materials) radiator hoses; pipes; flexible
hoses with fittings; textile reinforced
transmission belts; v-belts (60 to 180 cm
outside circumference); textile
reinforced transmission belts and v-belts
(180 to 240 cm outside circumference);
other transmission v-belts; textile
reinforced belts; transmission belts; belt
assemblies; belts; buffers; gaskets; seals;
floor mats; liners; o-rings; packing;
protection caps; glass stops; covers;
shifter control lever boots; grommets;
bellows; bushings; insulator blocks;
mounts; pads; bands; stoppers and
strips); coated paper gaskets and
washers; training manuals; drawings;
schematics; catalogs; rubber canvas
radiator seals; anti-skid mats and strips;
tempered safety glass for cabs of
vehicles of chapter 87; mirrors and
mirror assemblies; cold-rolled steel
hollow tubes; stainless steel tubes;
articles of iron or steel (tubes; couplings;
connectors; fittings; elbows; stems;
adapters; unions; o-rings; tees; cables;
cable assemblies; ropes; wire ropes;
roller chains; roller chain assemblies;
chains; chain kits and assemblies; chain
links and assemblies; screws; bolts;
nuts; plugs; rods; retainers; rings;
latches; washers; shims; pins; pin
assemblies; rivets; springs; clamps;
brackets; supports; racks; tool boxes;
clips; and flanges); copper ground straps
and cables; washers; and rivets; hex
wrench sets; hammers; gathering chain
tool assemblies; wrenches; latches;
locks; catches; handles; lock assemblies;
locks; lock keys; ignition keys; hinges;
supports; iron/steel/aluminum/zinc/
other base metal angles, dampers,
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
54519
brackets, gas struts, shock absorbers,
springs, supports, plates, and mounts;
plugs; radiator caps; covers; dust caps of
base metal; decals; name plates; identity
plates; emblems; engines; belt
tensioners; hydraulic tubes; hydraulic
cylinders; hydraulic motors and
assemblies; fuel pumps; hydraulic fluid
power pumps; hydraulic fluid power
gear pumps; master cylinders; brake
cylinders; pump modules and related
parts (pump cores, covers, diaphragms,
filters, gear sets, housings, impellers,
repair kits, nozzles, pistons and plates);
fans and fan assemblies; blowers and
blower assemblies; turbochargers;
compressors and compressor kits; heater
cores; air conditioners; evaporator core
assemblies; condensers; receiver-dryer
assemblies; water filters; water screens;
water strainers; oil filters; fuel filters;
filter elements; hydraulic filters; filter
receiver dryers; heaters; thermostats;
filter cartridges; filter elements; filter
strainers; air filters; air cleaners and
assemblies; catalytic converters; cab
filters; air dryer assemblies; receiver
dryer assemblies; air cleaner manifolds
and housing; oil and fuel filter elements;
strainer assemblies; sprayer parts (tips,
tubes, nozzles, tanks, supports, sprays,
spindles, spacers, retainers, reservoirs
for sprayers); jacks; lift cylinders;
counterweights; mufflers; valve plates;
buckets and bucket attachments;
channels; wrist rest assemblies; bezels,
brackets, bushings, dippers and arms for
buckets; link blocks; frames; support
brackets; elbows; cabs; shovel brackets;
baffles; shovel discs; mounts; auger floor
troughs; caps; door panels; tank ducts;
fuel tanks; air intake tubes; header
frames; cutterbars; conversion kits;
accumulators; rotary brush attachments;
wipers; straps; wiper blades and
assemblies; hydraulic valves; center
joints; swivel joints; joysticks; copper,
iron or steel check valves; aspirator kits;
breathers; plugs; poppets; copper/iron/
steel shut-off valves, control valves,
drain cocks and assemblies, quick
couplings, valve fittings, and stop
valves; copper/iron/steel connecting
and coupling blocks, cylinder caps,
cartridges, coils, control blocks,
hydraulic manifolds, plugs, pistons,
plug covers, control and hydraulic
valves for non-hand operated valves;
ball bearings; bearings and bearing
assemblies; roller bearings; bearing
cups; shims; spacers; tapered bearings;
thrust washers; balls; collars; rings;
races; transmission shafts; drive shafts
and shaft assemblies; bearing housings;
bearing carriers; bearing supports;
torque converters; transmissions; drive
assemblies; gear reduction units;
reducers; final drive housings; swing
E:\FR\FM\10SEN1.SGM
10SEN1
mstockstill on DSK4VPTVN1PROD with NOTICES
54520
Federal Register / Vol. 80, No. 175 / Thursday, September 10, 2015 / Notices
reduction assemblies; gear pump drives;
slewing rings; pulleys and pulley idlers;
flywheels; adapters; bushings; clutches;
couplings and coupling assemblies;
universal joints; gears; gear shifter forks;
sprockets; exhaust seals; engine gaskets
and kits; seal kits; oil seals; seal repair
kits; dust seals; taper fasteners; oil seals;
lube nipples; actuators; electric motors;
wiper motors; DC converters; printed
circuit boards; magnets; magnetic rings;
solenoids; coils; wet batteries; dry
batteries; starter motors; alternators;
visual signaling equipment; working
lights; floodlights; alarms; horns;
buzzers; welding orifices; wire feeders;
cable units; encoder cables; welding
torches; welding power sources;
conductive metals; tip bodies; block
heaters; heater assemblies; heating
elements; fluid heaters; heaters; heater
blocks; wireless network sensors;
speakers; software on CD-Rom; video
cameras; radars; true ground sensors;
radios; radio parts; radio antennas;
beacons; indicator lights; monitors; light
kits; control levers; potentiometers;
sensors; powertrain sensors; resistors;
fuses; electrical timers; relays; switch
assemblies; electrical shift lever buttons;
electrical control units; handle
assemblies; electrical connectors; wire
harnesses; sockets; terminal cables;
clamps; electrical connectors; lugs;
terminal connectors; relay assemblies;
electrical connectors; electrical control
units; switch assemblies; modules;
panel assemblies; electrical connectors;
wire connectors; housing contacts;
lamps; headlamps; bulbs; diodes;
pressure, humidity and shaft speed
sensors; transmitters; cables; ground
cables; electrical wires; wire assemblies;
wire harnesses; electrical cables;
antenna cables; safety belts; buckles;
trim panels and assemblies; air ducts;
head and roof liners; mounts; brake
pipes; gearbox covers; axles; axle
bushings; wheel weights; shock
absorbers; arms, housings and castings
for shock absorbers; radiators; exhaust
system pipes and tubes; ball joints; tie
rods; steering columns and wheels;
track rod assemblies; display mounts;
trailer hitch hammer straps; drawbar
hammer straps; coolant reservoirs;
wiper tank fixing brackets; washers;
temperature sensors; thermostatic
switches; fuel sender units; pressure
gauges; indicators; pressure switches;
hourmeters; instrument clusters;
tachometers; instrument panels; gauge
clusters; cold start units; environmental
control units; and seats (duty rates range
from free to 9.9%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
VerDate Sep<11>2014
17:28 Sep 09, 2015
Jkt 235001
Secretary at the address below. The
closing period for their receipt is
October 20, 2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT:
Diane Finver at Diane.Finver@trade.gov
or (202) 482–1367.
Dated: September 3, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–22853 Filed 9–9–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–57–2015]
Foreign-Trade Zone (FTZ) 265—
Conroe, Texas; Notification of
Proposed Production Activity; Bauer
Manufacturing Inc. (Stationary Oil/Gas
Drilling Rigs), Conroe, Texas
The City of Conroe, Texas, grantee of
FTZ 265, submitted a notification of
proposed production activity to the FTZ
Board on behalf of Bauer Manufacturing
Inc. (Bauer), located in Conroe, Texas.
The notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on August 19, 2015.
Bauer has authority to produce pile
drivers and leads, boring machinery,
foundation construction equipment,
foundation casings, related parts and
sub-assemblies, and tools and
accessories for pile drivers and boring
machinery within Site 1 of FTZ 265.
The current request would add new
finished products (stationary oil/gas
drilling rigs and related subassemblies)
and foreign-status materials and
components to the scope of authority.
Pursuant to 15 CFR 400.14(b),
additional FTZ authority would be
limited to the specific foreign-status
materials and components and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt Bauer from customs duty
payments on the foreign status materials
and components used in export
production. On its domestic sales, Bauer
PO 00000
Frm 00010
Fmt 4703
Sfmt 4703
would be able to choose the duty rate
during customs entry procedures that
applies to pile drivers and leads, boring
machinery, foundation construction
equipment, foundation casings, related
parts and sub-assemblies, tools and
accessories for pile drivers and boring
machinery, and stationary oil/gas
drilling rigs and related subassemblies
(duty rates: Free, 2.9%, or 5.0%) for the
foreign status materials and components
noted below and in the existing scope
of authority. Customs duties also could
possibly be deferred or reduced on
foreign status production equipment.
The materials and components
sourced from abroad include:
Subassemblies and components for
stationary drilling rigs; sealing paper for
gaskets; printed materials (protective
covers for keyboards); electric voltage
converters; cotton transport straps
(Subheading 5806.31, 8.8%); antennas;
steel flanges; expansion tanks; and,
metal clamps (duty rate ranges from free
to 8.8%). Inputs included in textile
category 229 (classified within HTSUS
Subheading 5806.31) will be admitted to
the zone in privileged foreign status (19
CFR 146.41), thereby precluding
inverted tariff benefits on such items.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
October 20, 2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact Pierre
Duy at Pierre.Duy@trade.gov or (202)
482–1378.
Dated: August 28, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–22860 Filed 9–9–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[S–125–2015]
Foreign-Trade Zone 77—Memphis,
Tennessee Application for Expansion
of Subzone 77E; Cummins, Inc.,
Memphis, Tennessee
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
E:\FR\FM\10SEN1.SGM
10SEN1
Agencies
[Federal Register Volume 80, Number 175 (Thursday, September 10, 2015)]
[Notices]
[Pages 54519-54520]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-22853]
[[Page 54519]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-58-2015]
Foreign-Trade Zone (FTZ) 133--Quad-Cities, Iowa/Illinois;
Notification of Proposed Production Activity; CNH Industrial America,
LLC; Subzone 133E, (Agricultural and Construction Equipment,
Subassemblies and Kits), Burlington and West Burlington, Iowa
CNH Industrial America, LLC (CNH), operator of Subzone 133E,
submitted a notification of proposed production activity to the FTZ
Board for its facilities located within Subzone 133E at sites in
Burlington and West Burlington, Iowa. The notification conforming to
the requirements of the regulations of the FTZ Board (15 CFR 400.22)
was received on September 2, 2015.
The CNH facilities are used for the production and distribution of
agricultural and construction equipment, subassemblies and kits.
Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the
specific foreign-status materials and components and specific finished
products described in the submitted notification (as described below)
and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt CNH from customs duty
payments on the foreign-status components used in export production. On
its domestic sales, CNH would be able to choose the duty rates during
customs entry procedures that apply to decal kits; toolbox kits; air
conditioner kits; air conditioner service kits; forklifts; crawler
dozers; tractor loaders; tractor loader backhoes; tractor loader
backhoe assemblies and attachments (shafts, hook assemblies, buckets,
shaft masts); cabs units; forklifts; cab service kits; valve service
kits; engine hoods; loaders; bucket arms; boom and dipper assemblies;
link assemblies; crawler dozer frames with tracks; axle assemblies; cab
assemblies; draper, auger, and corn headers; bucket service kits;
strippers for combine headers; wheel mount assemblies; combine header
service kits; combine header arm assemblies, frames, and floors;
locking tabs; reel tine flap kits; header dividers; hydraulic valve
kits; valve part kits; beacon kits; relay voltage kits; electrical
control kits; programmable controller kits; electrical service kits;
and ignition wire service kits (duty rates range from duty-free to
5.8%) for the foreign-status inputs noted below. Customs duties also
could possibly be deferred or reduced on foreign-status production
equipment.
The components and materials sourced from abroad include: Articles
of plastic (hoses; hose assemblies; shields; tubes without fittings;
non-reinforced tubes, pipes and hoses with fittings; reinforced tubes,
pipes and hoses with fittings; caution decals; insulators; fuel caps;
steering wheel knobs; handles; spacers; tool boxes; joints; insulators;
clamps; clips; retainers; strips; trim; seals; washers; and gaskets);
articles of rubber (gaskets; insulation; pads; weather strips and
sheets; weather strip profile shapes; insulation; non-reinforced
elbows; tubes; and hoses without fittings; metal reinforced hose and
hose assemblies without fittings; metal reinforced hoses; hose
assemblies and tubes with fittings; textile reinforced rubber hoses;
hose assemblies and sleeves without fittings; textile reinforced
flexible hoses; air conditioner hoses; hose assemblies with fittings;
reinforced (other materials) air hoses; flexible hoses; hydraulic
hoses; alternator hoses and hose assemblies without fittings;
reinforced (other materials) radiator hoses; pipes; flexible hoses with
fittings; textile reinforced transmission belts; v-belts (60 to 180 cm
outside circumference); textile reinforced transmission belts and v-
belts (180 to 240 cm outside circumference); other transmission v-
belts; textile reinforced belts; transmission belts; belt assemblies;
belts; buffers; gaskets; seals; floor mats; liners; o-rings; packing;
protection caps; glass stops; covers; shifter control lever boots;
grommets; bellows; bushings; insulator blocks; mounts; pads; bands;
stoppers and strips); coated paper gaskets and washers; training
manuals; drawings; schematics; catalogs; rubber canvas radiator seals;
anti-skid mats and strips; tempered safety glass for cabs of vehicles
of chapter 87; mirrors and mirror assemblies; cold-rolled steel hollow
tubes; stainless steel tubes; articles of iron or steel (tubes;
couplings; connectors; fittings; elbows; stems; adapters; unions; o-
rings; tees; cables; cable assemblies; ropes; wire ropes; roller
chains; roller chain assemblies; chains; chain kits and assemblies;
chain links and assemblies; screws; bolts; nuts; plugs; rods;
retainers; rings; latches; washers; shims; pins; pin assemblies;
rivets; springs; clamps; brackets; supports; racks; tool boxes; clips;
and flanges); copper ground straps and cables; washers; and rivets; hex
wrench sets; hammers; gathering chain tool assemblies; wrenches;
latches; locks; catches; handles; lock assemblies; locks; lock keys;
ignition keys; hinges; supports; iron/steel/aluminum/zinc/other base
metal angles, dampers, brackets, gas struts, shock absorbers, springs,
supports, plates, and mounts; plugs; radiator caps; covers; dust caps
of base metal; decals; name plates; identity plates; emblems; engines;
belt tensioners; hydraulic tubes; hydraulic cylinders; hydraulic motors
and assemblies; fuel pumps; hydraulic fluid power pumps; hydraulic
fluid power gear pumps; master cylinders; brake cylinders; pump modules
and related parts (pump cores, covers, diaphragms, filters, gear sets,
housings, impellers, repair kits, nozzles, pistons and plates); fans
and fan assemblies; blowers and blower assemblies; turbochargers;
compressors and compressor kits; heater cores; air conditioners;
evaporator core assemblies; condensers; receiver-dryer assemblies;
water filters; water screens; water strainers; oil filters; fuel
filters; filter elements; hydraulic filters; filter receiver dryers;
heaters; thermostats; filter cartridges; filter elements; filter
strainers; air filters; air cleaners and assemblies; catalytic
converters; cab filters; air dryer assemblies; receiver dryer
assemblies; air cleaner manifolds and housing; oil and fuel filter
elements; strainer assemblies; sprayer parts (tips, tubes, nozzles,
tanks, supports, sprays, spindles, spacers, retainers, reservoirs for
sprayers); jacks; lift cylinders; counterweights; mufflers; valve
plates; buckets and bucket attachments; channels; wrist rest
assemblies; bezels, brackets, bushings, dippers and arms for buckets;
link blocks; frames; support brackets; elbows; cabs; shovel brackets;
baffles; shovel discs; mounts; auger floor troughs; caps; door panels;
tank ducts; fuel tanks; air intake tubes; header frames; cutterbars;
conversion kits; accumulators; rotary brush attachments; wipers;
straps; wiper blades and assemblies; hydraulic valves; center joints;
swivel joints; joysticks; copper, iron or steel check valves; aspirator
kits; breathers; plugs; poppets; copper/iron/steel shut-off valves,
control valves, drain cocks and assemblies, quick couplings, valve
fittings, and stop valves; copper/iron/steel connecting and coupling
blocks, cylinder caps, cartridges, coils, control blocks, hydraulic
manifolds, plugs, pistons, plug covers, control and hydraulic valves
for non-hand operated valves; ball bearings; bearings and bearing
assemblies; roller bearings; bearing cups; shims; spacers; tapered
bearings; thrust washers; balls; collars; rings; races; transmission
shafts; drive shafts and shaft assemblies; bearing housings; bearing
carriers; bearing supports; torque converters; transmissions; drive
assemblies; gear reduction units; reducers; final drive housings; swing
[[Page 54520]]
reduction assemblies; gear pump drives; slewing rings; pulleys and
pulley idlers; flywheels; adapters; bushings; clutches; couplings and
coupling assemblies; universal joints; gears; gear shifter forks;
sprockets; exhaust seals; engine gaskets and kits; seal kits; oil
seals; seal repair kits; dust seals; taper fasteners; oil seals; lube
nipples; actuators; electric motors; wiper motors; DC converters;
printed circuit boards; magnets; magnetic rings; solenoids; coils; wet
batteries; dry batteries; starter motors; alternators; visual signaling
equipment; working lights; floodlights; alarms; horns; buzzers; welding
orifices; wire feeders; cable units; encoder cables; welding torches;
welding power sources; conductive metals; tip bodies; block heaters;
heater assemblies; heating elements; fluid heaters; heaters; heater
blocks; wireless network sensors; speakers; software on CD-Rom; video
cameras; radars; true ground sensors; radios; radio parts; radio
antennas; beacons; indicator lights; monitors; light kits; control
levers; potentiometers; sensors; powertrain sensors; resistors; fuses;
electrical timers; relays; switch assemblies; electrical shift lever
buttons; electrical control units; handle assemblies; electrical
connectors; wire harnesses; sockets; terminal cables; clamps;
electrical connectors; lugs; terminal connectors; relay assemblies;
electrical connectors; electrical control units; switch assemblies;
modules; panel assemblies; electrical connectors; wire connectors;
housing contacts; lamps; headlamps; bulbs; diodes; pressure, humidity
and shaft speed sensors; transmitters; cables; ground cables;
electrical wires; wire assemblies; wire harnesses; electrical cables;
antenna cables; safety belts; buckles; trim panels and assemblies; air
ducts; head and roof liners; mounts; brake pipes; gearbox covers;
axles; axle bushings; wheel weights; shock absorbers; arms, housings
and castings for shock absorbers; radiators; exhaust system pipes and
tubes; ball joints; tie rods; steering columns and wheels; track rod
assemblies; display mounts; trailer hitch hammer straps; drawbar hammer
straps; coolant reservoirs; wiper tank fixing brackets; washers;
temperature sensors; thermostatic switches; fuel sender units; pressure
gauges; indicators; pressure switches; hourmeters; instrument clusters;
tachometers; instrument panels; gauge clusters; cold start units;
environmental control units; and seats (duty rates range from free to
9.9%).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is October 20,
2015.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT: Diane Finver at Diane.Finver@trade.gov
or (202) 482-1367.
Dated: September 3, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-22853 Filed 9-9-15; 8:45 am]
BILLING CODE 3510-DS-P