Medical Devices; Ear, Nose, and Throat Devices; Classification of the External Upper Esophageal Sphincter Compression Device, 46192-46194 [2015-19074]
Download as PDF
46192
Federal Register / Vol. 80, No. 149 / Tuesday, August 4, 2015 / Rules and Regulations
510(m) of the FD&C Act provides that
FDA may exempt a class II device from
the premarket notification requirements
under section 510(k) of the FD&C Act if
FDA determines that premarket
notification is not necessary to provide
reasonable assurance of the safety and
effectiveness of the device. For this type
of device, FDA has determined that
premarket notification is necessary to
provide reasonable assurance of the
safety and effectiveness of the device.
Therefore, this type of device is not
exempt from premarket notification
requirements. Persons who intend to
market this type of device must submit
to FDA a premarket notification, prior to
marketing the device, which contains
information about the Trichomonas
vaginalis nucleic acid assay they intend
to market.
II. Environmental Impact
The Agency has determined under 21
CFR 25.34(b) that this action is of type
that does not individually or
cumulatively have a significant effect on
the human environment. Therefore,
neither an environmental assessment
nor an environmental impact statement
is required.
III. Paperwork Reduction Act of 1995
Authority: 21 U.S.C. 351, 360, 360c, 360e,
360j, 371.
2. Add § 866.3860 to subpart D to read
as follows:
■
§ 866.3860 Trichomonas vaginalis nucleic
acid assay.
(a) Identification. A Trichomonas
vaginalis nucleic acid assay is a device
that consists of primers, probes,
enzymes, and controls for the
amplification and detection of
trichomonas nucleic acids in
endocervical swabs, vaginal swabs, and
female urine specimens, from women
symptomatic for vaginitis, cervicitis, or
urethritis and/or to aid in the diagnosis
of trichomoniasis in asymptomatic
women. The detection of trichomonas
nucleic acids, in conjunction with other
laboratory tests, aids in the clinical
laboratory diagnosis of trichomoniasis
caused by Trichomonas vaginalis.
(b) Classification. Class II (special
controls). The special controls are set
forth in FDA’s guideline document
entitled: ‘‘Class II Special Controls
Guideline: Nucleic Acid Amplification
Assays for the Detection of Trichomonas
vaginalis; Guideline for Industry and
Food and Drug Administration Staff.’’
See § 866.1(e) for information on
obtaining this document.
Dated: July 30, 2015.
Leslie Kux,
Associate Commissioner for Policy.
List of Subjects in 21 CFR Part 866
mstockstill on DSK4VPTVN1PROD with RULES
This final administrative order
establishes special controls that refer to
previously approved collections of
information found in other FDA
regulations. These collections of
information are subject to review by the
Office of Management and Budget
(OMB) under the Paperwork Reduction
Act of 1995 (44 U.S.C. 3501–3520). The
collections of information in part 807,
subpart E, regarding premarket
notification submissions have been
approved under OMB control number
0910–0120; the collections of
information in 21 CFR part 820 have
been approved under OMB control
number 0910–0073; and the collections
of information in 21 CFR parts 801 and
809 have been approved under OMB
control number 0910–0485.
HHS.
Biologics, Laboratories, Medical
devices.
Therefore, under the Federal Food,
Drug, and Cosmetic Act and under
authority delegated to the Commissioner
of Food and Drugs, 21 CFR part 866 is
amended as follows:
PART 866—IMMUNOLOGY AND
MICROBIOLOGY DEVICES
1. The authority citation for 21 CFR
part 866 continues to read as follows:
■
VerDate Sep<11>2014
14:47 Aug 03, 2015
Jkt 235001
[FR Doc. 2015–19072 Filed 8–3–15; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
21 CFR Part 874
[Docket No. FDA–2015–N–2525]
Medical Devices; Ear, Nose, and Throat
Devices; Classification of the External
Upper Esophageal Sphincter
Compression Device
AGENCY:
ACTION:
Food and Drug Administration,
Final order.
The Food and Drug
Administration (FDA) is classifying the
external upper esophageal sphincter
(UES) compression device into class II
(special controls). The special controls
that will apply to the device are
identified in this order and will be part
of the codified language for the external
UES compression device’s
classification. The Agency is classifying
the device into class II (special controls)
in order to provide a reasonable
SUMMARY:
PO 00000
Frm 00008
Fmt 4700
Sfmt 4700
assurance of safety and effectiveness of
the device.
DATES: This order is effective August 4,
2015. The classification was applicable
on March 6, 2015.
FOR FURTHER INFORMATION CONTACT:
Sunny Park, Center for Devices and
Radiological Health, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. 2432, Silver Spring,
MD, 20993–0002, 301–796–7059,
sunny.park@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
In accordance with section 513(f)(1) of
the Federal Food, Drug, and Cosmetic
Act (the FD&C Act) (21 U.S.C.
360c(f)(1)), devices that were not in
commercial distribution before May 28,
1976 (the date of enactment of the
Medical Device Amendments of 1976),
generally referred to as postamendments
devices, are classified automatically by
statute into class III without any FDA
rulemaking process. These devices
remain in class III and require
premarket approval, unless and until
the device is classified or reclassified
into class I or II, or FDA issues an order
finding the device to be substantially
equivalent, in accordance with section
513(i), to a predicate device that does
not require premarket approval. The
Agency determines whether new
devices are substantially equivalent to
predicate devices by means of
premarket notification procedures in
section 510(k) of the FD&C Act (21
U.S.C. 360(k)) and part 807 (21 CFR part
807) of the regulations.
Section 513(f)(2) of the FD&C Act, as
amended by section 607 of the Food and
Drug Administration Safety and
Innovation Act (Pub. L. 112–144),
provides two procedures by which a
person may request FDA to classify a
device under the criteria set forth in
section 513(a)(1). Under the first
procedure, the person submits a
premarket notification under section
510(k) of the FD&C Act for a device that
has not previously been classified and,
within 30 days of receiving an order
classifying the device into class III
under section 513(f)(1), the person
requests a classification under section
513(f)(2) of the FD&C Act. Under the
second procedure, rather than first
submitting a premarket notification
under section 510(k) of the FD&C Act
and then a request for classification
under the first procedure, the person
determines that there is no legally
marketed device upon which to base a
determination of substantial
equivalence and requests a classification
under section 513(f)(2) of the FD&C Act.
E:\FR\FM\04AUR1.SGM
04AUR1
mstockstill on DSK4VPTVN1PROD with RULES
Federal Register / Vol. 80, No. 149 / Tuesday, August 4, 2015 / Rules and Regulations
If the person submits a request to
classify the device under this second
procedure, FDA may decline to
undertake the classification request if
FDA identifies a legally marketed device
that could provide a reasonable basis for
review of substantial equivalence with
the device or if FDA determines that the
device submitted is not of ‘‘lowmoderate risk’’ or that general controls
would be inadequate to control the risks
and special controls to mitigate the risks
cannot be developed.
In response to a request to classify a
device under either procedure provided
by section 513(f)(2) of the FD&C Act,
FDA will classify the device by written
order within 120 days. This
classification will be the initial
classification of the device. On
November 22, 2013, Somna
Therapeutics, LLC, submitted a request
for classification of the REZA BAND
UES Assist Device under section
513(f)(2) of the FD&C Act. The
manufacturer recommended that the
device be classified into class II (Ref. 1).
In accordance with section 513(f)(2) of
the FD&C Act, FDA reviewed the
request in order to classify the device
under the criteria for classification set
forth in section 513(a)(1). FDA classifies
devices into class II if general controls
by themselves are insufficient to
provide reasonable assurance of safety
and effectiveness, but there is sufficient
information to establish special controls
to provide reasonable assurance of the
safety and effectiveness of the device for
its intended use. After review of the
information submitted in the request,
FDA determined that the device can be
classified into class II with the
establishment of special controls. FDA
believes these special controls, in
addition to general controls, will
provide reasonable assurance of the
safety and effectiveness of the device.
Therefore, on March 6, 2015, FDA
issued an order to the requestor
classifying the device into class II. FDA
is codifying the classification of the
device by adding 21 CFR 874.5900.
Following the effective date of this
final classification order, any firm
submitting a premarket notification
(510(k)) for an external UES
compression device will need to comply
with the special controls named in this
final order. The device is assigned the
generic name external UES compression
device, and it is identified as a
prescription device used to apply
external pressure on the cricoid
cartilage for the purpose of reducing the
symptoms of laryngopharyngeal reflux
disease.
FDA has identified the following risks
to health associated specifically with
VerDate Sep<11>2014
14:47 Aug 03, 2015
Jkt 235001
this type of device, as well as the
mitigation measures required to mitigate
these risks, in table 1.
TABLE 1—EXTERNAL UES COMPRESSION DEVICE RISKS AND MITIGATION
MEASURES
Identified risk
Mitigation method
Adverse tissue Biocompatibility assessment.
reaction.
Risk of overClinical study.
compression. Labeling.
Technical specifications.
Device misuse/ Technical specifications.
incorrect fitClinical study.
ting/malfunc- Labeling.
tions.
Performance testing (mechanical integrity and shelf
life testing).
FDA believes that the following
special controls, in combination with
the general controls, address these risks
to health and provide reasonable
assurance of the safety and
effectiveness:
1. The patient contacting components
must be demonstrated to be
biocompatible.
2. Non-clinical performance testing
must demonstrate that the device
performs as intended under anticipated
conditions of use. The following
performance characteristics must be
demonstrated:
a. Mechanical integrity testing (e.g.,
tensile strength testing, fatigue testing)
and
b. shelf life testing
3. The technical specifications must
include pressure measurement accuracy
to characterize device performance.
4. Clinical performance testing must
document any adverse events observed
during clinical use, and demonstrate
that the device performs as intended
under anticipated conditions of use.
5. Labeling must include the
following:
a. Appropriate warnings and
precautions.
b. A detailed summary of the clinical
testing pertinent to use of the device
including a detailed summary of the
device-related complications or adverse
events.
c. Detailed instructions on how to fit
the device to the patient.
d. Instructions for reprocessing of any
reusable components.
6. Patient labeling must be provided
and must include:
a. Relevant warnings, precautions,
and adverse effects/complications.
b. Information on how to correctly
wear the device.
c. The potential risks and benefits
associated with the use of the device.
PO 00000
Frm 00009
Fmt 4700
Sfmt 4700
46193
d. Alternative treatments.
e. Reprocessing instructions.
The external UES compression device
is a prescription device restricted to
patient use only upon the authorization
of a practitioner licensed by law to
administer or use the device; see 21 CFR
801.109 (Prescription devices).
Section 510(m) of the FD&C Act
provides that FDA may exempt a class
II device from the premarket notification
requirements under section 510(k), if
FDA determines that premarket
notification is not necessary to provide
reasonable assurance of the safety and
effectiveness of the device. For this type
of device, FDA has determined that
premarket notification is necessary to
provide reasonable assurance of the
safety and effectiveness of the device.
Therefore, this device type is not
exempt from premarket notification
requirements. Persons who intend to
market this type of device must submit
to FDA a premarket notification, prior to
marketing the device, which contains
information about the external UES
compression device they intend to
market.
II. Environmental Impact
The Agency has determined under 21
CFR 25.34(b) that this action is of a type
that does not individually or
cumulatively have a significant effect on
the human environment. Therefore,
neither an environmental assessment
nor an environmental impact statement
is required.
III. Paperwork Reduction Act of 1995
This final order establishes special
controls that refer to previously
approved collections of information
found in other FDA regulations. These
collections of information are subject to
review by the Office of Management and
Budget (OMB) under the Paperwork
Reduction Act of 1995 (44 U.S.C. 3501–
3520). The collections of information in
21 CFR part 807, subpart E, regarding
premarket notification submissions,
have been approved under OMB control
number 0910–0120, and the collections
of information in 21 CFR part 801,
regarding labeling, have been approved
under OMB control number 0910–0485.
IV. Reference
The following reference has been
placed on display in the Division of
Dockets Management (HFA–305), Food
and Drug Administration, 5630 Fishers
Lane, Rm. 1061, Rockville, MD 20852,
and may be seen by interested persons
between 9 a.m. and 4 p.m., Monday
through Friday, and is available
electronically at https://
www.regulations.gov.
E:\FR\FM\04AUR1.SGM
04AUR1
46194
Federal Register / Vol. 80, No. 149 / Tuesday, August 4, 2015 / Rules and Regulations
1. DEN130046: De Novo Request per 513(f)(2)
from Somna Therapeutics, LLC, dated
November 11, 2013.
List of Subjects in 21 CFR Part 874
Medical devices.
Therefore, under the Federal Food,
Drug, and Cosmetic Act and under
authority delegated to the Commissioner
of Food and Drugs, 21 CFR part 874 is
amended as follows:
PART 874—EAR, NOSE, AND THROAT
DEVICES
1. The authority citation for 21 CFR
part 874 continues to read as follows:
(i) Relevant warnings, precautions,
and adverse effects/complications,
(ii) Information on how to correctly
wear the device,
(iii) The potential risks and benefits
associated with the use of the device,
(iv) Alternative treatments, and
(v) Reprocessing instructions.
Dated: July 30, 2015.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2015–19074 Filed 8–3–15; 8:45 am]
BILLING CODE 4164–01–P
■
Authority: 21 U.S.C. 351, 360, 360c, 360e,
360j, 371.
2. Add § 874.5900 to subpart F to read
as follows:
■
mstockstill on DSK4VPTVN1PROD with RULES
§ 874.5900 External upper esophageal
sphincter compression device.
14:47 Aug 03, 2015
Jkt 235001
Coast Guard
33 CFR Part 165
[Docket Number USCG–2015–0543]
(a) Identification. An external upper
esophageal sphincter compression
device is a prescription device used to
apply external pressure on the cricoid
cartilage for the purpose of reducing the
symptoms of laryngopharyngeal reflux
disease.
(b) Classification. Class II (special
controls). The special controls for this
device are:
(1) The patient contacting
components must be demonstrated to be
biocompatible.
(2) Non-clinical performance testing
must demonstrate that the device
performs as intended under anticipated
conditions of use. The following
performance characteristics must be
demonstrated:
(i) Mechanical integrity testing (e.g.,
tensile strength testing, fatigue testing)
and
(ii) Shelf life testing.
(3) The technical specifications must
include pressure measurement accuracy
to characterize device performance.
(4) Clinical performance testing must
document any adverse events observed
during clinical use, and demonstrate
that the device performs as intended
under anticipated conditions of use.
(5) Labeling must include the
following:
(i) Appropriate warnings and
precautions,
(ii) A detailed summary of the clinical
testing pertinent to use of the device
including a detailed summary of the
device-related complications or adverse
events,
(iii) Detailed instructions on how to
fit the device to the patient, and
(iv) Instructions for reprocessing of
any reusable components.
(6) Patient labeling must be provided
and must include:
VerDate Sep<11>2014
DEPARTMENT OF HOMELAND
SECURITY
RIN 1625–AA00; 1625–AA11
Safety Zones and Regulated
Navigation Area; Shell Arctic Drilling/
Exploration Vessel and Associated
Voluntary First Amendment Area,
Portland, OR
Coast Guard, DHS.
Temporary final rule.
AGENCY:
ACTION:
The Coast Guard is
establishing temporary safety zones
around Royal Dutch Shell’s (Shell)
contracted vessel FENNICA, which is
participating in Shell’s planned Arctic
oil drilling and exploration operations,
while it is located in the U.S. Territorial
and Internal Waters of the Sector
Columbia River Captain of the Port
Zone. In addition, the Coast Guard is
establishing a regulated navigation area
to designate a Voluntary First
Amendment Area for individuals that
desire to exercise their First
Amendment free speech rights with
regards to Shell’s operations. The safety
zones and regulated navigation area
created by this rule are necessary to
ensure the mutual safety of all
waterways users including the
FENNICA and those individuals that
desire to exercise their First
Amendment rights.
DATES: This rule is effective without
actual notice from August 4, 2015 until
August 22, 2015. For the purposes of
enforcement, actual notice will be used
from July 22, 2015 until August 4, 2015.
ADDRESSES: Documents mentioned in
this preamble are part of docket USCG–
2015–0543 to view documents
mentioned in this preamble as being
available in the docket, go to https://
www.regulations.gov, type the docket
SUMMARY:
PO 00000
Frm 00010
Fmt 4700
Sfmt 4700
number in the ‘‘SEARCH’’ box and click
‘‘SEARCH.’’ Click on Open Docket
Folder on the line associated with this
rulemaking. You may also visit the
Docket Management Facility in Room
W12–140 on the ground floor of the
Department of Transportation West
Building, 1200 New Jersey Avenue SE.,
Washington, DC 20590, between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal holidays.
FOR FURTHER INFORMATION CONTACT: If
you have questions on this rule, call or
email Lieutenant Commander Laura
Springer, Waterways Management
Division, Coast Guard Marine Safety
Unit Portland; telephone (503) 240–
2594, email Laura.M.Springer@uscg.mil.
If you have questions on viewing or
submitting material to the docket, call
Barbara Hairston, Program Manager,
Docket Operations, telephone (202)
366–9826.
SUPPLEMENTARY INFORMATION:
Table of Acronyms
DHS Department of Homeland Security
FR Federal Register
NPRM Notice of Proposed Rulemaking
A. Regulatory History and Information
The Coast Guard is issuing this
temporary final rule without prior
notice and opportunity to comment
pursuant to authority under section 4(a)
of the Administrative Procedure Act
(APA) (5 U.S.C. 553(b)). This provision
authorizes an agency to issue a rule
without prior notice and opportunity to
comment when the agency for good
cause finds that those procedures are
‘‘impracticable, unnecessary, or contrary
to the public interest.’’ Under 5 U.S.C.
553(b)(B), the Coast Guard finds that
good cause exists for not publishing a
notice of proposed rulemaking (NPRM)
with respect to this rule because
publishing an NPRM would be
impracticable since the regulation is
immediately necessary to help ensure
the safety of all waterway users
including the Shell contracted vessel
FENNICA and those individuals that
desire to exercise their First
Amendment rights regarding Shell’s
activities and holding a notice and
comment period at this time would
delay regulatory implementation
beyond the arrival of the FENNICA and
expected start of First Amendment
activities regarding Shell’s operations,
thereby increasing the safety risk to all
waterways users.
Under 5 U.S.C. 553(d)(3), the Coast
Guard finds that good cause exists for
making this rule effective less than 30
days after publication in the Federal
Register. For reasons identical to those
described above, delaying the effective
E:\FR\FM\04AUR1.SGM
04AUR1
Agencies
[Federal Register Volume 80, Number 149 (Tuesday, August 4, 2015)]
[Rules and Regulations]
[Pages 46192-46194]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-19074]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
21 CFR Part 874
[Docket No. FDA-2015-N-2525]
Medical Devices; Ear, Nose, and Throat Devices; Classification of
the External Upper Esophageal Sphincter Compression Device
AGENCY: Food and Drug Administration, HHS.
ACTION: Final order.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is classifying the
external upper esophageal sphincter (UES) compression device into class
II (special controls). The special controls that will apply to the
device are identified in this order and will be part of the codified
language for the external UES compression device's classification. The
Agency is classifying the device into class II (special controls) in
order to provide a reasonable assurance of safety and effectiveness of
the device.
DATES: This order is effective August 4, 2015. The classification was
applicable on March 6, 2015.
FOR FURTHER INFORMATION CONTACT: Sunny Park, Center for Devices and
Radiological Health, Food and Drug Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. 2432, Silver Spring, MD, 20993-0002, 301-796-7059,
sunny.park@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
In accordance with section 513(f)(1) of the Federal Food, Drug, and
Cosmetic Act (the FD&C Act) (21 U.S.C. 360c(f)(1)), devices that were
not in commercial distribution before May 28, 1976 (the date of
enactment of the Medical Device Amendments of 1976), generally referred
to as postamendments devices, are classified automatically by statute
into class III without any FDA rulemaking process. These devices remain
in class III and require premarket approval, unless and until the
device is classified or reclassified into class I or II, or FDA issues
an order finding the device to be substantially equivalent, in
accordance with section 513(i), to a predicate device that does not
require premarket approval. The Agency determines whether new devices
are substantially equivalent to predicate devices by means of premarket
notification procedures in section 510(k) of the FD&C Act (21 U.S.C.
360(k)) and part 807 (21 CFR part 807) of the regulations.
Section 513(f)(2) of the FD&C Act, as amended by section 607 of the
Food and Drug Administration Safety and Innovation Act (Pub. L. 112-
144), provides two procedures by which a person may request FDA to
classify a device under the criteria set forth in section 513(a)(1).
Under the first procedure, the person submits a premarket notification
under section 510(k) of the FD&C Act for a device that has not
previously been classified and, within 30 days of receiving an order
classifying the device into class III under section 513(f)(1), the
person requests a classification under section 513(f)(2) of the FD&C
Act. Under the second procedure, rather than first submitting a
premarket notification under section 510(k) of the FD&C Act and then a
request for classification under the first procedure, the person
determines that there is no legally marketed device upon which to base
a determination of substantial equivalence and requests a
classification under section 513(f)(2) of the FD&C Act.
[[Page 46193]]
If the person submits a request to classify the device under this
second procedure, FDA may decline to undertake the classification
request if FDA identifies a legally marketed device that could provide
a reasonable basis for review of substantial equivalence with the
device or if FDA determines that the device submitted is not of ``low-
moderate risk'' or that general controls would be inadequate to control
the risks and special controls to mitigate the risks cannot be
developed.
In response to a request to classify a device under either
procedure provided by section 513(f)(2) of the FD&C Act, FDA will
classify the device by written order within 120 days. This
classification will be the initial classification of the device. On
November 22, 2013, Somna Therapeutics, LLC, submitted a request for
classification of the REZA BAND UES Assist Device under section
513(f)(2) of the FD&C Act. The manufacturer recommended that the device
be classified into class II (Ref. 1).
In accordance with section 513(f)(2) of the FD&C Act, FDA reviewed
the request in order to classify the device under the criteria for
classification set forth in section 513(a)(1). FDA classifies devices
into class II if general controls by themselves are insufficient to
provide reasonable assurance of safety and effectiveness, but there is
sufficient information to establish special controls to provide
reasonable assurance of the safety and effectiveness of the device for
its intended use. After review of the information submitted in the
request, FDA determined that the device can be classified into class II
with the establishment of special controls. FDA believes these special
controls, in addition to general controls, will provide reasonable
assurance of the safety and effectiveness of the device.
Therefore, on March 6, 2015, FDA issued an order to the requestor
classifying the device into class II. FDA is codifying the
classification of the device by adding 21 CFR 874.5900.
Following the effective date of this final classification order,
any firm submitting a premarket notification (510(k)) for an external
UES compression device will need to comply with the special controls
named in this final order. The device is assigned the generic name
external UES compression device, and it is identified as a prescription
device used to apply external pressure on the cricoid cartilage for the
purpose of reducing the symptoms of laryngopharyngeal reflux disease.
FDA has identified the following risks to health associated
specifically with this type of device, as well as the mitigation
measures required to mitigate these risks, in table 1.
Table 1--External UES Compression Device Risks and Mitigation Measures
------------------------------------------------------------------------
Identified risk Mitigation method
------------------------------------------------------------------------
Adverse tissue reaction................ Biocompatibility assessment.
Risk of overcompression................ Clinical study.
Labeling.
Technical specifications.
Device misuse/incorrect fitting/ Technical specifications.
malfunctions. Clinical study.
Labeling.
Performance testing (mechanical
integrity and shelf life
testing).
------------------------------------------------------------------------
FDA believes that the following special controls, in combination
with the general controls, address these risks to health and provide
reasonable assurance of the safety and effectiveness:
1. The patient contacting components must be demonstrated to be
biocompatible.
2. Non-clinical performance testing must demonstrate that the
device performs as intended under anticipated conditions of use. The
following performance characteristics must be demonstrated:
a. Mechanical integrity testing (e.g., tensile strength testing,
fatigue testing) and
b. shelf life testing
3. The technical specifications must include pressure measurement
accuracy to characterize device performance.
4. Clinical performance testing must document any adverse events
observed during clinical use, and demonstrate that the device performs
as intended under anticipated conditions of use.
5. Labeling must include the following:
a. Appropriate warnings and precautions.
b. A detailed summary of the clinical testing pertinent to use of
the device including a detailed summary of the device-related
complications or adverse events.
c. Detailed instructions on how to fit the device to the patient.
d. Instructions for reprocessing of any reusable components.
6. Patient labeling must be provided and must include:
a. Relevant warnings, precautions, and adverse effects/
complications.
b. Information on how to correctly wear the device.
c. The potential risks and benefits associated with the use of the
device.
d. Alternative treatments.
e. Reprocessing instructions.
The external UES compression device is a prescription device
restricted to patient use only upon the authorization of a practitioner
licensed by law to administer or use the device; see 21 CFR 801.109
(Prescription devices).
Section 510(m) of the FD&C Act provides that FDA may exempt a class
II device from the premarket notification requirements under section
510(k), if FDA determines that premarket notification is not necessary
to provide reasonable assurance of the safety and effectiveness of the
device. For this type of device, FDA has determined that premarket
notification is necessary to provide reasonable assurance of the safety
and effectiveness of the device. Therefore, this device type is not
exempt from premarket notification requirements. Persons who intend to
market this type of device must submit to FDA a premarket notification,
prior to marketing the device, which contains information about the
external UES compression device they intend to market.
II. Environmental Impact
The Agency has determined under 21 CFR 25.34(b) that this action is
of a type that does not individually or cumulatively have a significant
effect on the human environment. Therefore, neither an environmental
assessment nor an environmental impact statement is required.
III. Paperwork Reduction Act of 1995
This final order establishes special controls that refer to
previously approved collections of information found in other FDA
regulations. These collections of information are subject to review by
the Office of Management and Budget (OMB) under the Paperwork Reduction
Act of 1995 (44 U.S.C. 3501-3520). The collections of information in 21
CFR part 807, subpart E, regarding premarket notification submissions,
have been approved under OMB control number 0910-0120, and the
collections of information in 21 CFR part 801, regarding labeling, have
been approved under OMB control number 0910-0485.
IV. Reference
The following reference has been placed on display in the Division
of Dockets Management (HFA-305), Food and Drug Administration, 5630
Fishers Lane, Rm. 1061, Rockville, MD 20852, and may be seen by
interested persons between 9 a.m. and 4 p.m., Monday through Friday,
and is available electronically at https://www.regulations.gov.
[[Page 46194]]
1. DEN130046: De Novo Request per 513(f)(2) from Somna Therapeutics,
LLC, dated November 11, 2013.
List of Subjects in 21 CFR Part 874
Medical devices.
Therefore, under the Federal Food, Drug, and Cosmetic Act and under
authority delegated to the Commissioner of Food and Drugs, 21 CFR part
874 is amended as follows:
PART 874--EAR, NOSE, AND THROAT DEVICES
0
1. The authority citation for 21 CFR part 874 continues to read as
follows:
Authority: 21 U.S.C. 351, 360, 360c, 360e, 360j, 371.
0
2. Add Sec. 874.5900 to subpart F to read as follows:
Sec. 874.5900 External upper esophageal sphincter compression device.
(a) Identification. An external upper esophageal sphincter
compression device is a prescription device used to apply external
pressure on the cricoid cartilage for the purpose of reducing the
symptoms of laryngopharyngeal reflux disease.
(b) Classification. Class II (special controls). The special
controls for this device are:
(1) The patient contacting components must be demonstrated to be
biocompatible.
(2) Non-clinical performance testing must demonstrate that the
device performs as intended under anticipated conditions of use. The
following performance characteristics must be demonstrated:
(i) Mechanical integrity testing (e.g., tensile strength testing,
fatigue testing) and
(ii) Shelf life testing.
(3) The technical specifications must include pressure measurement
accuracy to characterize device performance.
(4) Clinical performance testing must document any adverse events
observed during clinical use, and demonstrate that the device performs
as intended under anticipated conditions of use.
(5) Labeling must include the following:
(i) Appropriate warnings and precautions,
(ii) A detailed summary of the clinical testing pertinent to use of
the device including a detailed summary of the device-related
complications or adverse events,
(iii) Detailed instructions on how to fit the device to the
patient, and
(iv) Instructions for reprocessing of any reusable components.
(6) Patient labeling must be provided and must include:
(i) Relevant warnings, precautions, and adverse effects/
complications,
(ii) Information on how to correctly wear the device,
(iii) The potential risks and benefits associated with the use of
the device,
(iv) Alternative treatments, and
(v) Reprocessing instructions.
Dated: July 30, 2015.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2015-19074 Filed 8-3-15; 8:45 am]
BILLING CODE 4164-01-P