Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting, 43061-43062 [2015-17817]
Download as PDF
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Federal Register / Vol. 80, No. 139 / Tuesday, July 21, 2015 / Notices
they are affiliated with (if any), and an
email address prior to placing callers
into the conference room. Callers can
expect to incur charges for calls they
initiate over wireless lines, and the
Commission will not refund any
incurred charges. Callers will incur no
charge for calls they initiate over landline connections to the toll-free
telephone number. Persons with hearing
impairments may also follow the
proceedings by first calling the Federal
Relay Service at 1–800–977–8339 and
providing the Service with the
conference call number and conference
ID number.
Member of the public are also invited
and welcomed to make statements at the
end of the conference call. In addition,
members of the public may submit
written comments; the comments must
be received in the regional office by
October 8, 2015. Written comments may
be mailed to the Regional Programs
Unit, U.S. Commission on Civil Rights,
55 W. Monroe St., Suite 410, Chicago,
IL 60615. They may also be faxed to the
Commission at (312) 353–8324, or
emailed to Administrative Assistant,
Carolyn Allen at callen@usccr.gov.
Persons who desire additional
information may contact the Regional
Programs Unit at (312) 353–8311.
Records and documents discussed
during the meeting will be available for
public viewing prior to and after the
meeting at https://facadatabase.gov/
committee/meetings.aspx?cid=257 and
clicking on the ‘‘Meeting Details’’ and
‘‘Documents’’ links. Records generated
from this meeting may also be inspected
and reproduced at the Regional
Programs Unit, as they become
available, both before and after the
meeting. Persons interested in the work
of this Committee are directed to the
Commission’s Web site, https://
www.usccr.gov, or may contact the
Regional Programs Unit at the above
email or street address.
Agenda:
Welcome and Introductions
Susan Glisson, Chair
Discussion and Vote on Childcare
Subsidy Advisory Memorandum
Mississippi Advisory Committee
Discussion and Vote on Race and
Prosecutorial Discretion Concept
Paper
Open Comment
Adjournment
DATES: The meeting will be held on
Tuesday, September 8, 2015, at 2:00
p.m. CST.
Public Call Information: Dial: 888–
510–1765; Conference ID: 8100238
FOR FURTHER INFORMATION CONTACT:
Melissa Mojnaroski, DFO, at 312–353–
8311 or mwojnaroski@usccr.gov.
VerDate Sep<11>2014
17:58 Jul 20, 2015
Jkt 235001
Dated: July 15, 2015.
David Mussatt,
Chief, Regional Programs Unit.
43061
Agenda
Public Session
[FR Doc. 2015–17785 Filed 7–20–15; 8:45 am]
BILLING CODE 6335–01–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–17–2015]
Foreign-Trade Zone (FTZ) 127—West
Columbia, South Carolina;
Authorization of Production Activity;
Isola USA Corporation; (Dielectric
Prepreg and Copper-Clad Laminate);
Ridgeway, South Carolina
On March 17, 2015, the RichlandLexington Airport District, Columbia
Metropolitan Airport, grantee of FTZ
127, submitted a notification of
proposed production activity to the
Foreign-Trade Zones (FTZ) Board on
behalf of Isola USA Corporation, located
within Site 4 of FTZ 127, in Ridgeway,
South Carolina.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 18196, 04–03–
2015). The FTZ Board has determined
that no further review of the activity is
warranted at this time. The production
activity described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
Dated: July 15, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–17855 Filed 7–20–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
1. Welcome and Introductions.
2. Remarks from the Bureau of
Industry and Security Management.
3. Industry Presentations.
4. New Business.
Closed Session
5. Discussion of matters determined to
be exempt from the provisions relating
to public meetings found in 5 U.S.C.
app. 2 10(a)(1) and 10(a)(3).
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at Yvette.Springer@
bis.doc.gov no later than August 18,
2015.
A limited number of seats will be
available during the public session of
the meeting. Reservations are not
accepted. To the extent that time
permits, members of the public may
present oral statements to the
Committee. The public may submit
written statements at any time before or
after the meeting. However, to facilitate
distribution of public presentation
materials to the Committee members,
the Committee suggests that the
materials be forwarded before the
meeting to Ms. Springer.
The Assistant Secretary for
Administration, with the concurrence of
the General Counsel, formally
determined on February 25, 2015
pursuant to section 10(d) of the Federal
Advisory Committee Act, as amended (5
U.S.C. app. 2 10(d), that the portion of
this meeting dealing with pre-decisional
changes to the Commerce Control List
and U.S. export control policies shall be
exempt from the provisions relating to
public meetings found in 5 U.S.C. app.
2 10(a)(1) and 10(a)(3). The remaining
portions of the meeting will be open to
the public.
For more information contact Yvette
Springer on (202) 482–2813.
Sensors and Instrumentation
Technical Advisory Committee; Notice
of Partially Closed Meeting
Dated: July 16, 2015.
Yvette Springer,
Committee Liaison Officer.
The Sensors and Instrumentation
Technical Advisory Committee (SITAC)
will meet on August 25, 2015, 9:30 a.m.,
in the Herbert C. Hoover Building,
Room 3884, 14th Street between
Constitution and Pennsylvania Avenues
NW., Washington, DC. The Committee
advises the Office of the Assistant
Secretary for Export Administration on
technical questions that affect the level
of export controls applicable to sensors
and instrumentation equipment and
technology.
[FR Doc. 2015–17814 Filed 7–20–15; 8:45 am]
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
BILLING CODE P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Materials Processing Equipment
Technical Advisory Committee; Notice
of Partially Closed Meeting
The Materials Processing Equipment
Technical Advisory Committee
E:\FR\FM\21JYN1.SGM
21JYN1
43062
Federal Register / Vol. 80, No. 139 / Tuesday, July 21, 2015 / Notices
(MPETAC) will meet on August 4, 2015,
9:00 a.m., Room 3884, in the Herbert C.
Hoover Building, 14th Street between
Pennsylvania and Constitution Avenues
NW., Washington, DC. The Committee
advises the Office of the Assistant
Secretary for Export Administration
with respect to technical questions that
affect the level of export controls
applicable to materials processing
equipment and related technology.
Open Session
[FR Doc. 2015–17817 Filed 7–20–15; 8:45 am]
BILLING CODE 3510–JT–P
DEPARTMENT OF COMMERCE
[A–570–831]
1. Opening remarks and
introductions.
2. Presentation of papers and
comments by the Public.
3. Discussions on results from last,
and proposals from last Wassenaar
meeting.
4. Report on proposed and recently
issued changes to the Export
Administration Regulations.
5. Other business.
Fresh Garlic from the People’s
Republic of China: Initiation of
Antidumping Duty New Shipper
Review; 2014–2015
6. Discussion of matters determined to
be exempt from the provisions relating
to public meetings found in 5 U.S.C.
app. 2 10 (a) (1) and 10 (a) (3).
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at Yvette.Springer@
bis.doc.gov, no later than July 28, 2015.
A limited number of seats will be
available for the public session.
Reservations are not accepted. To the
extent that time permits, members of the
public may present oral statements to
the Committee. The public may submit
written statements at any time before or
after the meeting. However, to facilitate
the distribution of public presentation
materials to the Committee members,
the Committee suggests that presenters
forward the public presentation
materials prior to the meeting to Ms.
Springer via email.
The Assistant Secretary for
Administration, with the concurrence of
the delegate of the General Counsel,
formally determined on February 20,
2015, pursuant to section 10(d) of the
Federal Advisory Committee Act, as
amended (5 U.S.C. app. 2 10(d)), that
the portion of the meeting dealing with
matters the premature disclosure of
which would be likely to frustrate
significantly implementation of a
proposed agency action as described in
5 U.S.C. 552b(c)(9)(B) shall be exempt
from the provisions relating to public
meetings found in 5 U.S.C. app. 2 10(a)
(1) and 10(a) (3). The remaining portions
of the meeting will be open to the
17:58 Jul 20, 2015
Jkt 235001
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: On May 11, 2015, the
Department received a timely request
for a new shipper review (NSR) from
Jinxiang Huameng Imp & Exp Co.
(Huameng), in accordance with section
751(a)(2)(B)(i) of the Tariff Act of 1930,
as amended (the Act), and 19 CFR
351.214(c). On May 22, 2015
Department issued a letter to Huameng
requesting that it correct certain
deficiencies in its initial request.1 On
July 6, 2015, Huameng submitted a
timely response to the Department’s
request.2 The Department of Commerce
(Department) has determined that the
request for a NSR of the antidumping
duty order on fresh garlic from the
People’s Republic of China (PRC) meets
the statutory and regulatory
requirements for initiation. The period
of review (POR) is November 1, 2014,
through April 30, 2015.
DATES: Effective Date: July 21, 2015.
FOR FURTHER INFORMATION CONTACT:
Andrew Huston, AD/CVD Operations,
Office VII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue NW., Washington, DC 20230;
telephone: (202) 482–4261.
SUPPLEMENTARY INFORMATION:
AGENCY:
Closed Session
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Dated: July 16, 2015.
Yvette Springer,
Committee Liaison Officer.
International Trade Administration
Agenda
VerDate Sep<11>2014
public. For more information, call
Yvette Springer at (202) 482–2813.
Background
The Department published the
antidumping duty order on fresh garlic
from the PRC in the Federal Register on
1 See Letter from Mark Hoadley, ‘‘Opportunity to
Correct Deficiencies,’’ dated May 22, 2015.
2 See Letter from Huameng, ‘‘Deficiency
Corrections for Antidumping New Shipper Review
Request filed on behalf of Jinxiang Huameng Imp
& Exp Co., Ltd.,’’(Deficiency Corrections) dated July
6, 2015.
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
November 16, 1994.3 On May 11, 2015,
the Department received a timely
request for a NSR from Huameng.
Huameng certified that it is the exporter
and producer of the fresh garlic upon
which the request for a NSR is based.
Pursuant to section 751(a)(2)(B)(i)(I) of
the Act and 19 CFR 351.214(b)(2)(i),
Huameng certified that it did not export
fresh garlic for sale to the United States
during the period of investigation
(POI).4 Moreover, pursuant to section
751(a)(2)(B)(i)(II) of the Act and 19 CFR
351.214(b)(2)(iii)(A), Huameng certified
that, since the investigation was
initiated, it never has been affiliated
with any exporter or producer who
exported the subject merchandise to the
United States during the POI, including
those not individually examined during
the investigation.5 Further, as required
by 19 CFR 351.214(b)(2)(iii)(B), it
certified that its export activities are not
controlled by the central government of
the PRC.6 Huameng also certified it had
no subsequent shipments of subject
merchandise.7
In addition to the certifications
described above, pursuant to 19 CFR
351.214(b)(2)(iv), Huameng submitted
documentation establishing the
following: (1) the date of its first sale to
an unaffiliated customer in the United
States; (2) the date on which the fresh
garlic was first entered; (3) the volume
of that shipment.8
The Department queried the database
of U.S. Customs and Border Protection
(CBP) in an attempt to confirm that the
shipment reported by Huameng had
entered the United States for
consumption and that liquidation had
been properly suspended for
antidumping duties. The information
which the Department examined was
consistent with that provided by
Huameng in its request.9
Period of Review
Pursuant to 19 CFR 351.214(c), an
exporter or producer may request a NSR
within one year of the date on which its
subject merchandise was first entered.
Moreover, 19 CFR 351.214(d)(1) states
that if the request for the review is made
during the six-month period ending
3 See Antidumping Duty Order: Fresh Garlic From
the People’s Republic of China, 59 FR 59209
(November16, 1994).
4 See Huameng’s request for a NSR dated May 11,
2015, at Exhibit 2.
5 Id.
6 Id.
7 See Deficiency Corrections at page 4.
8 Id. at Exhibit 1.
9 See Memorandum to the File from Andrew
Huston, ‘‘New Shipper Reviews of the Antidumping
Duty Order on Fresh Garlic from the People’s
Republic of China: Customs Entries from November
1, 2014, to April 30, 2015,’’ dated July 9, 2015.
E:\FR\FM\21JYN1.SGM
21JYN1
Agencies
[Federal Register Volume 80, Number 139 (Tuesday, July 21, 2015)]
[Notices]
[Pages 43061-43062]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-17817]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Materials Processing Equipment Technical Advisory Committee;
Notice of Partially Closed Meeting
The Materials Processing Equipment Technical Advisory Committee
[[Page 43062]]
(MPETAC) will meet on August 4, 2015, 9:00 a.m., Room 3884, in the
Herbert C. Hoover Building, 14th Street between Pennsylvania and
Constitution Avenues NW., Washington, DC. The Committee advises the
Office of the Assistant Secretary for Export Administration with
respect to technical questions that affect the level of export controls
applicable to materials processing equipment and related technology.
Agenda
Open Session
1. Opening remarks and introductions.
2. Presentation of papers and comments by the Public.
3. Discussions on results from last, and proposals from last
Wassenaar meeting.
4. Report on proposed and recently issued changes to the Export
Administration Regulations.
5. Other business.
Closed Session
6. Discussion of matters determined to be exempt from the
provisions relating to public meetings found in 5 U.S.C. app. 2 10 (a)
(1) and 10 (a) (3).
The open session will be accessible via teleconference to 20
participants on a first come, first serve basis. To join the
conference, submit inquiries to Ms. Yvette Springer at
Yvette.Springer@bis.doc.gov, no later than July 28, 2015.
A limited number of seats will be available for the public session.
Reservations are not accepted. To the extent that time permits, members
of the public may present oral statements to the Committee. The public
may submit written statements at any time before or after the meeting.
However, to facilitate the distribution of public presentation
materials to the Committee members, the Committee suggests that
presenters forward the public presentation materials prior to the
meeting to Ms. Springer via email.
The Assistant Secretary for Administration, with the concurrence of
the delegate of the General Counsel, formally determined on February
20, 2015, pursuant to section 10(d) of the Federal Advisory Committee
Act, as amended (5 U.S.C. app. 2 10(d)), that the portion of the
meeting dealing with matters the premature disclosure of which would be
likely to frustrate significantly implementation of a proposed agency
action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the
provisions relating to public meetings found in 5 U.S.C. app. 2 10(a)
(1) and 10(a) (3). The remaining portions of the meeting will be open
to the public. For more information, call Yvette Springer at (202) 482-
2813.
Dated: July 16, 2015.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2015-17817 Filed 7-20-15; 8:45 am]
BILLING CODE 3510-JT-P