July 17, 2015 – Federal Register Recent Federal Regulation Documents

The Consumer Product Safety Commission (``Commission'' or ``CPSC'') is proposing to determine that unfinished and untreated trunk wood does not contain heavy elements that would exceed the limits specified in the Commission's toy standard, ASTM F963-11. Based on this proposed determination, unfinished and untreated trunk wood in toys would not require third party testing. In the ``Rules and Regulations'' section of this Federal Register, the Commission is issuing this determination as a direct final rule. If we receive no significant adverse comment in response to the direct final rule, we will not take further action on this proposed rule.

We, the Office of Surface Mining Reclamation and Enforcement (OSMRE), are announcing that the Draft Environmental Impact Statement (DEIS) for the proposed stream protection rule is available for public review and comment.

This Notice identifies unutilized, underutilized, excess, and surplus Federal property reviewed by HUD for suitability for possible use to assist the homeless.

The U.S. Department of Energy (DOE) is amending its energy conservation standards for small three-phase commercial air-cooled air conditioners (single package only) and heat pumps (single package and split system) less than 65,000 Btu/h; water-source heat pumps; and commercial oil-fired storage water heaters. Pursuant to the Energy Policy and Conservation Act of 1975 (EPCA), as amended, DOE must assess whether the uniform national standards for these covered equipment need to be updated each time the corresponding industry standardthe American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE)/ Illuminating Engineering Society of North America (IESNA) Standard 90.1 (ASHRAE Standard 90.1)is amended, which most recently occurred on October 9, 2013. Under EPCA, DOE may only adopt more stringent standards if there is clear and convincing evidence showing that more stringent amended standards would be technologically feasible and economically justified, and would save a significant additional amount of energy. The levels DOE is adopting are the same as the efficiency levels specified in ASHRAE Standard 90.1-2013. DOE has determined that the ASHRAE Standard 90.1-2013 efficiency levels for the equipment types listed above are more stringent than existing Federal energy conservation standards and will result in economic and energy savings compared existing energy conservation standards. Furthermore, DOE has concluded that clear and convincing evidence does not exist that would justify more-stringent standard levels than the efficiency levels in ASHRAE Standard 90.1-2013 for any of the equipment classes. DOE has also determined that the standards for small three-phase commercial air-cooled air conditioners (split system) do not need to be amended. DOE is also updating the current Federal test procedure for commercial warm-air furnaces to incorporate by reference the most current version of the American National Standards Institute (ANSI) Z21.47, Gas-fired central furnaces, specified in ASHRAE Standard 90.1, and the most current version of ASHRAE 103, Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers.