July 7, 2015 – Federal Register Recent Federal Regulation Documents

This document finalizes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation which clarifies that Bureau staff, other than institution-level staff, will recalculate the inmate's sentence in accordance with the terms of the commutation order if a petition for commutation of sentence is granted.

In this document, the Bureau of Prisons (Bureau) streamlines regulations on transferring offenders to foreign countries by eliminating language that constitutes agency guidance to staff. Guidance language will be retained in the relevant Bureau policy.

This document corrects a technical error that appeared in the final rule published in the February 27, 2015 Federal Register (80 FR 10749) entitled ``Patient Protection and Affordable Care Act; HHS Notice of Benefit and Payment Parameters for 2016.''

We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 430 helicopters to require inspecting the tail rotor control tube assembly (control tube) and either repairing or replacing the control tube. This AD was prompted by two reports of failure of the control tube bonded clevis. The actions of this AD are intended to prevent failure of a control tube bonded clevis, which could lead to failure of the control tube and subsequent loss of helicopter control.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by a report of loose bolts that are intended to secure the translating door crank assembly to the outside handle shaft. This AD requires a detailed inspection for loose bolts on the aft translating door crank assembly, and removal and reinstallation of the bolts. We are issuing this AD to prevent loose bolts from falling out. If both bolts become loose or fall out after the door is closed and locked, the door cannot be opened from inside or outside, which could impede evacuation in the event of an emergency.

The Environmental Protection Agency (EPA) is finalizing performance specifications and test procedures for hydrogen chloride (HCl) continuous emission monitoring systems (CEMS) to provide sources and regulatory agencies with criteria and test procedures for evaluating the acceptability of HCl CEMS. The final performance specification (Performance Specification 18) includes requirements for initial acceptance, including instrument accuracy and stability assessments. This action also finalizes quality assurance (QA) procedures for HCl CEMS used for compliance determination at stationary sources. The QA procedures (Procedure 6) specify the minimum QA requirements necessary for the control and assessment of the quality of CEMS data submitted to the EPA. This action establishes consistent requirements for ensuring and assessing the quality of HCl data measured by CEMS. The affected systems are those used for determining compliance with emission standards for HCl on a continuous basis as specified in an applicable permit or regulation. The affected industries and their North American Industry Classification System (NAICS) codes are listed in the SUPPLEMENTARY INFORMATION section of this preamble.

In this document, the Commission implemented allocation changes from the World Radiocommunication Conference (Geneva, 2007) (WRC-07) and updated related service rules. The Commission took this action in order to conform its rules, to the extent practical, to the decisions that the international community made at WRC-07. This action will promote the advancement of new and expanded services and provide significant benefits to the American people. In addition, the Commission revised the International Table of Frequency Allocations within its rules to generally reflect the allocation changes made at the World Radiocommunication Conference (Geneva, 2012) (WRC-12).