Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 35302 [2015-15113]
Download as PDF
<![CDATA[
35302
Federal Register / Vol. 80, No. 118 / Friday, June 19, 2015 / Notices
If you wish to file a Civil Rights
program complaint of discrimination,
complete the USDA Program
Discrimination Complaint Form (PDF),
found online at https://
www.ascr.usda.gov/complaint_filing_
cust.html, or at any USDA office, or call
(866) 632–9992 to request the form. You
may also write a letter containing all of
the information requested in the form.
Send your completed complaint form or
letter to us by mail at U.S. Department
of Agriculture, Director, Office of
Adjudication, 1400 Independence
Avenue SW., Washington, DC 20250–
9410, by fax (202) 690–7442, or email at
program.intake@usda.gov.
Individuals who are deaf, hard of
hearing, or have speech disabilities and
who wish to file either an EEO or
program complaint, please contact
USDA through the Federal Relay
Service at (800) 877–8339 or (800) 845–
6136 (in Spanish).
Persons with disabilities, who wish to
file a program complaint, please see
information above on how to contact us
by mail directly or by email. If you
require alternative means of
communication for program information
(e.g., Braille, large print, audiotape,
etc.), please contact USDA’s TARGET
Center at (202) 720–2600 (voice and
TDD).
Dated: June 10, 2015.
Lillian E. Salerno,
Administrator, Rural Business-Cooperative
Service.
[FR Doc. 2015–15193 Filed 6–18–15; 8:45 am]
BILLING CODE 3410–XY–P
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
Notice and Opportunity for
Public Comment.
ACTION:
Pursuant to Section 251 of the Trade
Act 1974, as amended (19 U.S.C. 2341
et seq.), the Economic Development
Administration (EDA) has received
petitions for certification of eligibility to
apply for Trade Adjustment Assistance
from the firms listed below.
Accordingly, EDA has initiated
investigations to determine whether
increased imports into the United States
of articles like or directly competitive
with those produced by each of these
firms contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
Economic Development
Administration, Department of
Commerce.
AGENCY:
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE
6/12/2015 THROUGH 6/15/2015
Firm name
Firm address
Joval Machine Company, Inc
515 Main Street, Yalesville,
CT 06492.
502 East Industrial Drive,
Mountain View, MO 65548.
Custom Metal Finishers, Inc.
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
71030, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Date accepted
for investigation
Dated: June 15, 2015.
Michael S. DeVillo,
Eligibility Examiner.
[FR Doc. 2015–15113 Filed 6–18–15; 8:45 am]
BILLING CODE 3510–WH–P
VerDate Sep<11>2014
19:33 Jun 18, 2015
Jkt 235001
6/15/2015
6/15/2015
Product(s)
The firm manufactures sheet metal and fiberglass heat
shielding insulating products.
The firm manufactures various metal valves components
used in gas appliance.
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–41–2015]
Notification of Proposed Production
Activity, BMW Manufacturing Co., LLC,
Subzone 38A, (Motor Vehicles),
Spartanburg, South Carolina
BMW Manufacturing Co., LLC
(BMWMC), operator of Subzone 38A,
submitted a notification of proposed
production activity to the FTZ Board for
its facility in Spartanburg, South
Carolina. The notification conforming to
the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on June 3, 2015.
BMWMC already has authority to
produce passenger sedans, coupes, and
sport utility vehicles. The current
request would add a new finished
product (passenger vehicle bodies) and
foreign-status materials and components
to the scope of authority. Pursuant to 15
CFR 400.14(b), additional FTZ authority
would be limited to the specific foreignstatus materials and components and
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
specific finished products described in
the submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt BMWMC from customs
duty payments on the foreign status
materials and components used in
export production. On its domestic
sales, BMWMC would be able to choose
the duty rate during customs entry
procedures that applies to passenger
motor vehicles and related bodies (duty
rate 2.5%) for the foreign status
materials and components noted below
and in the existing scope of authority.
Customs duties also could possibly be
deferred or reduced on foreign status
production equipment.
The materials and components
sourced from abroad include: first-aid
kits; acrylic/vinyl paints; trunk lid
adhesives; acoustic absorber foams; tire
sealants; rubber assembly gaskets; tires;
felt strips (HTSUS Subheadings
5602.10, 5602.90); damping strips
(Subheading 5602.90); tufted floor
coverings; carpet sets; velcro straps;
glass; windshields; steel flanges; iron/
E:\FR\FM\19JNN1.SGM
19JNN1
]]>Agencies
[Federal Register Volume 80, Number 118 (Friday, June 19, 2015)]
[Notices]
[Page 35302]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-15113]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for Determination of Eligibility To
Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration, Department of Commerce.
ACTION: Notice and Opportunity for Public Comment.
-----------------------------------------------------------------------
Pursuant to Section 251 of the Trade Act 1974, as amended (19
U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has
received petitions for certification of eligibility to apply for Trade
Adjustment Assistance from the firms listed below. Accordingly, EDA has
initiated investigations to determine whether increased imports into
the United States of articles like or directly competitive with those
produced by each of these firms contributed importantly to the total or
partial separation of the firm's workers, or threat thereof, and to a
decrease in sales or production of each petitioning firm.
List of Petitions Received by EDA for Certification Eligibility To Apply for Trade Adjustment Assistance 6/12/
2015 Through 6/15/2015
----------------------------------------------------------------------------------------------------------------
Date accepted
Firm name Firm address for Product(s)
investigation
----------------------------------------------------------------------------------------------------------------
Joval Machine Company, Inc... 515 Main Street, 6/15/2015 The firm manufactures sheet metal and
Yalesville, CT 06492. fiberglass heat shielding insulating
products.
Custom Metal Finishers, Inc.. 502 East Industrial 6/15/2015 The firm manufactures various metal
Drive, Mountain valves components used in gas
View, MO 65548. appliance.
----------------------------------------------------------------------------------------------------------------
Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Trade Adjustment Assistance for Firms
Division, Room 71030, Economic Development Administration, U.S.
Department of Commerce, Washington, DC 20230, no later than ten (10)
calendar days following publication of this notice.
Please follow the requirements set forth in EDA's regulations at 13
CFR 315.9 for procedures to request a public hearing. The Catalog of
Federal Domestic Assistance official number and title for the program
under which these petitions are submitted is 11.313, Trade Adjustment
Assistance for Firms.
Dated: June 15, 2015.
Michael S. DeVillo,
Eligibility Examiner.
[FR Doc. 2015-15113 Filed 6-18-15; 8:45 am]
BILLING CODE 3510-WH-P
