Certain New Chemicals; Receipt and Status Information, 31371-31375 [2015-13418]
Download as PDF
<![CDATA[
Federal Register / Vol. 80, No. 105 / Tuesday, June 2, 2015 / Notices
sites.google.com/site/
epaboardofscientificcounselors/bosccommittees/air-climate-and-energy by
June 11, 2015, and must go through a
metal detector, sign in with the security
desk, and show government-issued
photo identification to enter the
building. Attendees are encouraged to
arrive at least 15 minutes prior to the
start of the meeting to allow sufficient
time for security screening. Proposed
agenda items for the meeting include,
but are not limited to, the following:
Overview of materials provided to the
subcommittee; Overview of ORD;
Overview of ORD’s Air, Climate, and
Energy Research Program; Poster
session; and Subcommittee discussion.
Information on Services for
Individuals with Disabilities: For
information on access or services for
individuals with disabilities, please
contact Tim Benner at (202) 564–6769
or benner.tim@epa.gov. To request
accommodation of a disability, please
contact Tim Benner, preferably at least
ten days prior to the meeting, to give the
EPA as much time as possible to process
your request.
Dated: May 21, 2015.
Fred Hauchman,
Director, Office of Science Policy.
[FR Doc. 2015–13406 Filed 6–1–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2015–0184; FRL–9927–92]
Certain New Chemicals; Receipt and
Status Information
I. General Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from April
1, 2015 to April 29, 2015.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before July 2,
2015.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2015–0184,
and the specific PMN number or TME
asabaliauskas on DSK5VPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:26 Jun 01, 2015
Jkt 235001
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, IMD, 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: 202–564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that may apply to this action.
Although others may be affected, this
action applies directly to the submitter
of the PMNs addressed in this action.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
31371
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. What action is the agency taking?
This document provides receipt and
status reports, which cover the period
from April 1, 2015 to April 29, 2015,
and consists of the PMNs and TMEs
both pending and/or expired, and the
NOCs to manufacture a new chemical
that the Agency has received under
TSCA section 5 during this time period.
III. What is the agency’s authority for
taking this action?
Section 5 of TSCA requires that EPA
periodical publish in the Federal
Register receipt and status reports,
which cover the following EPA
activities required by provisions of
TSCA section 5.
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm. Anyone
who plans to manufacture or import a
new chemical substance for a nonexempt commercial purpose is required
by TSCA section 5 to provide EPA with
a PMN, before initiating the activity.
Section 5(h)(1) of TSCA authorizes EPA
to allow persons, upon application, to
manufacture (includes import) or
process a new chemical substance, or a
chemical substance subject to a
significant new use rule (SNUR) issued
under TSCA section 5(a), for ‘‘test
marketing’’ purposes, which is referred
to as a test marketing exemption, or
TME. For more information about the
requirements applicable to a new
chemical go to: https://www.epa.gov/
oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic status reports on the new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
E:\FR\FM\02JNN1.SGM
02JNN1
31372
Federal Register / Vol. 80, No. 105 / Tuesday, June 2, 2015 / Notices
IV. Receipt and Status Reports
In Table I. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: The EPA case
number assigned to the PMN, the date
the PMN was received by EPA, the
projected end date for EPA’s review of
the PMN, the submitting manufacturer/
importer, the potential uses identified
by the manufacturer/importer in the
PMN, and the chemical identity.
TABLE I—63 PMNS RECEIVED FROM 04/01/2015 TO 04/29/2015
Received
date
Case No.
Projected
notice end
date
Manufacturer/
Importer
Use
Chemical
(G) Material for photosensitive resin.
(S) Plasticizer in automotive parts.
(S) Dual cure/UV cure adhesion/barrier coating
for wood substrates.
(G) Agricultural .................
(G) Industrial .....................
(G) Home care .................
(G) Agricultural .................
(G) Agricultural .................
(G) Industrial .....................
(G) Agricultural .................
(G) Triarylsulfonium salt with haloalkyl
phosphate.
(S) 1,2,4-Benzenetricarboxylic acid,
1,2,4-trionyl ester.
(G)
Alkoxylated
substituted
alkyl
alkenoate polymer with disubstituted
alkane.
(G) Polyitaconic acid.
(G) Polyitaconic acid.
(G) Polyitaconic acid.
(G) Polyitaconic acid, potassium salt.
(G) Polyitaconic acid, ammonium salt.
(G) Polyitaconic acid, sodium zinc salt.
(G)
Polyitaconic
acid,
partially
decarboxylated.
(G) Azo Dyestuff.
(G) Hydrogenated oil.
(S) 2-cyclohexen-1-ol, 2-methyl-5-(1methylethenyl)-, 1-acetate, (1r,5r)-*.
2/23/2015
5/24/2015
CBI ....................................
P–15–0377 ....
4/1/2015
6/30/2015
PCCR USA, Inc ................
P–15–0378 ....
4/3/2015
7/2/2015
Allnex USA, Inc ................
P–15–0379
P–15–0379
P–15–0379
P–15–0380
P–15–0381
P–15–0382
P–15–0383
....
....
....
....
....
....
....
4/3/2015
4/3/2015
4/3/2015
4/3/2015
4/3/2015
4/3/2015
4/3/2015
7/2/2015
7/2/2015
7/202015
7/2/2015
7/2/2015
7/2/2015
7/2/2015
CBI
CBI
CBI
CBI
CBI
CBI
CBI
P–15–0384 ....
P–15–0385 ....
P–15–0386 ....
4/6/2015
4/6/2015
4/6/2015
7/5/2015
7/5/2015
7/5/2015
CBI ....................................
CBI ....................................
CBI ....................................
P–15–0389 ....
4/8/2015
7/7/2015
Shin Etsu Silicones of
America.
P–15–0389 ....
4/8/2015
7/7/2015
Shin Etsu Silicones of
America.
P–15–0390 ....
4/8/2015
7/7/2015
CBI ....................................
P–15–0391 ....
4/9/2015
7/8/2015
ICL–IP America, Inc .........
P–15–0392 ....
4/9/2015
7/8/2015
Polynt S.p.A ......................
P–15–0393 ....
4/9/2015
7/8/2015
CBI ....................................
P–15–0394 ....
4/9/2015
7/8/2015
CBI ....................................
P–15–0395 ....
asabaliauskas on DSK5VPTVN1PROD with NOTICES
P–15–0311 ....
4/9/2015
7/8/2015
CBI ....................................
P–15–0396 ....
4/10/2015
7/9/2015
CBI ....................................
VerDate Sep<11>2014
17:26 Jun 01, 2015
Jkt 235001
....................................
....................................
....................................
....................................
....................................
....................................
....................................
PO 00000
Frm 00024
Fmt 4703
(G) Open, non-dispersive
(G) Candle component .....
(G) Ingredient for consumer products. Dispersive use.
(S) Silylating agent ...........
(S) 2-Propenoic acid, 2-ethylhexyl ester,
reaction
products
with
dimethoxymethylsilane.
(S) Additive for silicone
(S) 2-Propenoic acid, 2-ethylhexyl ester,
RTV rubber compounds.
reaction
products
with
dimethoxymethylsilane.
(G) Lens material for use
(G)
Substituted
carbopolycyclic
in electronic applications.
dicarboxylic acid dialkyl ester, polymer with dialkyl carbopolycyclic ester
alkanediol and carbopolycyclic bis
(substituted carbomonocycle).
(G) The major intended
(G) Organic salt.
use of BCA13 is as
electrolytes for energy
storage flow batteries.
The energy storage flow
batteries are for industries use..
(S) Plasticizer for pvc
(S) 1,2,4-Benzenetricarboxylic acid,
powders for car interiors.
mixed decyl and octyl triesters*.
manufacturing; plasticizer
for pvc compounds for
cables.
(G) Adhesive .................... (G) Alkanedioic acid, polymer with
Alkanediol,
.alpha.-hydro-omega.ohydroxypoly[oxy(alkyl)] and alkyl aromatic diisocyanate.
(G) Adhesive .................... (G) Alkanedioic acid, polymer with
Alkanediol,
.alpha.-hydro-omega.hydroxypoly(oxy-alkanediyll,
aromaticfurandione
and
alkylaromaticdiisocy anate.
(G) Adhesive .................... (G) Alkanedioic acid, polymer with
Alkanediol,
.alpha.-hydro-.omega.hydroxypoly(oxyalkanediyl),
aromaticfuranedione
and
alkylaromatic diisocyanate.
(G) Resin for automotive
(G) Alkylmethacrylate, polymer with
coatings.
alkenylbenzene,
branched
alkylmethacrylate,
hydroxyalkylmethacrylate and acrylic
acid, T-butyl alkaneperoxoic acid
ester-initiated.
Sfmt 4703
E:\FR\FM\02JNN1.SGM
02JNN1
31373
Federal Register / Vol. 80, No. 105 / Tuesday, June 2, 2015 / Notices
TABLE I—63 PMNS RECEIVED FROM 04/01/2015 TO 04/29/2015—Continued
Case No.
Received
date
Projected
notice end
date
Manufacturer/
Importer
Use
Chemical
(G) Alkylmethacrylate, polymer with
alkenylbenzene,
branchedalkylmethacrylate
and
hydroxyalkylmethacrylate,
T-butyl
alkaneperoxoic acid ester-initiated.
(G) Cycloalkyl dicarboxylic anhydride,
polymer with tetrahydroxyalkyl, saturated fatty ester, and branched alkyl
glycidyl ester.
(G) Alkylbenzene sulfonic acid salt of n(3-(trialkylamino)alkyl)alkylacrylamide,
polymer with alkyl alkylacrylate and
alkylated bicycloalkyl alkylacrylate.
(G) Alkylbenzene sulfonic acid salt of n(3-(trialkylamino)alkyl)alkylacrylamide,
polymer with alkyl alkylacrylate and
alkylated bicycloalkyl alkylacrylate.
(G) Urethane oligomer.
4/10/2015
7/9/2015
CBI ....................................
(G) Industrial roll coat construction adhesive.
P–15–0398 ....
4/10/2015
7/9/2015
CBI ....................................
(G) Resin for solvent
borne coatings.
P–15–0399 ....
4/10/2015
7/9/2015
CBI ....................................
(G) Paint component ........
P–15–0400 ....
4/10/2015
7/9/2015
CBI ....................................
(G) Paint component ........
P–15–0401 ....
4/10/2015
7/9/2015
Carbon 3D, Inc .................
P–15–0402 ....
4/10/2015
7/9/2015
Carbon 3D, Inc .................
P–15–0403 ....
4/11/2015
7/10/2015
Trinity Manufacturing, Inc
P–15–0404 ....
4/10/2015
7/9/2015
Carbon 3D, Inc .................
P–15–0405 ....
4/13/2015
7/12/2015
Evonik Corporation ...........
(G) Oligomeric component
of 3D printer resin formulations.
(G) Oligomeric component
of 3D printer resin formulations.
(G) Soil fumigant additive
allowing emulsification
of liquid soil fumigants
(dispersive use).
(G) Oligomeric component
of 3D printer resin formulations.
(S) Base polymer for use
in parquet adhesive formulations; base polymer
for use in misc. adhesive formulations.
P–15–0408 ....
4/13/2015
7/12/2015
CBI ....................................
P–15–0409 ....
4/14/2015
7/13/2015
CBI ....................................
P–15–0410 ....
4/14/2015
7/13/2015
CBI ....................................
P–15–0411 ....
4/15/2015
7/14/2015
CBI ....................................
P–15–0412 ....
P–15–0414 ....
4/15/2015
4/17/2015
7/14/2015
7/16/2015
CBI ....................................
Carbon 3D, Inc .................
P–15–0415 ....
4/17/2015
7/16/2015
Carbon 3D, Inc .................
P–15–0416 ....
4/17/2015
7/16/2015
CBI ....................................
(G) Ingredient in industrial
adhesive.
(S) Hydrogen Sulfide
Scavenger.
(G) MDI prepolymer for
Cast Elastomers.
(G) Additive in aqueous
solutions.
(G) Cross Linking Agent ...
(G) Oligomeric component
of 3D printer resin formulations.
(G) Oligomeric component
of 3D printer resin formulations.
(G) Urethane coating ........
P–15–0417 ....
asabaliauskas on DSK5VPTVN1PROD with NOTICES
P–15–0397 ....
4/17/2015
7/16/2015
CBI ....................................
(G) Urethane coating ........
P–15–0418 ....
4/17/2015
7/16/2015
CBI ....................................
P–15–0418 ....
4/17/2015
7/16/2015
CBI ....................................
P–15–0419 ....
4/20/2015
7/19/2015
CBI ....................................
(S) Water clarifying agent,
odor control agent,
bleaching.
agent, and general oxidant
for water treatment.
(G) Destructive use in fuel
production.
(G) Flame retardant material.
VerDate Sep<11>2014
17:26 Jun 01, 2015
Jkt 235001
PO 00000
Frm 00025
Fmt 4703
Sfmt 4703
E:\FR\FM\02JNN1.SGM
(G) Urethane oligomer.
(G) Ethoxylated amine phosphate ester.
(G) Urethane oligomer.
(S) Poly[oxy(methyl-1, 2-ethanediyl)],
.alpha.-hydro-.omega.-hydroxy-, polymer
with
5-isocyanato-1(isocyanatomethyl)-1,3,3trimethylcyclohexane,
n-[3(trimethoxysily)propyl]-1-butanamineblocked*.
(G) Aqueous polyurethane dispersion.
(G) Substituted alkanolamine ether.
(G) MDI Prepolymer.
(G) Fatty acid esters with polyols
polyalkyl ethers.
(G) Perfluorinated alkyl diene.
(G) Urethane oligomer.
(G) Urethane oligomer.
(G) Aromatic isocyanate, polymer with
aromatic
diamine,
alkyloxirane,
alkyloxirane polymer with oxirane
ether with alkyltriol (3:1 ), and
oxirane.
(G) Aromatic isocyanate, polymer with
aromatic
diamine,
alkyloxirane,
alkyloxirane polymer with poly alkylene glycol.
(G) Alkyl peroxide.
(G) Alkyl peroxide.
(G) 2,2-bis[3′,5′-dihaloo-4′-haloalkyloxy
Carbomonocycle] propane.
02JNN1
31374
Federal Register / Vol. 80, No. 105 / Tuesday, June 2, 2015 / Notices
TABLE I—63 PMNS RECEIVED FROM 04/01/2015 TO 04/29/2015—Continued
Case No.
Received
date
Projected
notice end
date
Manufacturer/
Importer
Use
(G) Intermediate ...............
(S) Reactive polymer in 2
part epoxy adhesive.
(G) Oligomeric component
of 3D printer.
(S) Intermediate to make
polymers.
P–15–0421 ....
P–15–0422 ....
4/21/2015
4/21/2015
7/20/2015
7/20/2015
CBI ....................................
CBI ....................................
P–15–0423 ....
4/21/2015
7/20/2015
Carbon 3D, Inc .................
P–15–0424 ....
4/21/2015
....................
Colonial Chemical, Inc ......
P–15–0425 ....
4/21/2015
7/20/2015
Colonial Chemical, Inc ......
P–15–0426 ....
4/21/2015
7/20/2015
Colonial Chemical, Inc ......
P–15–0427 ....
4/22/2015
7/21/2015
CBI ....................................
P–15–0428 ....
4/23/2015
7/22/2015
ICL–IP America, Inc .........
P–15–0429 ....
4/23/2015
7/22/2015
CBI ....................................
P–15–0430 ....
P–15–0431 ....
4/23/2015
4/24/2015
7/22/2015
7/23/2015
CBI ....................................
CBI ....................................
P–15–0433 ....
P–15–0435 ....
4/26/2015
4/27/2015
7/25/2015
7/26/2015
CBI ....................................
CBI ....................................
P–15–0436 ....
4/28/2015
7/27/2015
CBI ....................................
P–15–0437 ....
4/28/2015
7/27/2015
Henkel Corporation ..........
P–15–0438 ....
4/29/2015
7/28/2015
CBI ....................................
P–15–0439 ....
4/29/2015
7/28/2015
Perstorp Polyols, Inc ........
P–15–0440 ....
4/29/2015
7/28/2015
CBI ....................................
P–15–0441 ....
4/29/2015
7/28/2015
CBI ....................................
asabaliauskas on DSK5VPTVN1PROD with NOTICES
In Table II. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Chemical
(S) Intermediate to make
polymers.
(S) Viscosity control in
hard surface cleaners.
(G) Resin for coatings ......
(G) The major intended
use of BCA13 is as
electrolytes for energy
storage flow batteries.
The energy storage flow
batteries are for industries use.
(G) HAPS free, silicone
based resin for the manufacture of ambient curing.
(G) Papermaking additive
(G) Alkyd polymeric additive for industrial coatings.
(G) Lubricant additive .......
(G) Open, non-dispersive
(G) Alkoxysilane.
(G) Amine modified epoxy resin.
(G) Urethane oligomer.
(S) D-glucopyranose, oligomeric, bu
glycosides,
polymers
with
epichlorohydrin*.
(S) D-glucopyranoside, hexyl, polymer
with 2-(chloromethyl) oxirane*.
(S) Tetradecanoic acid, compd. with
1,1’-iminobid [2-propanol] (1:1) (9ci)*.
(G)
Substituted
alkylene
carbomonocycle, homopolymer, substituted polyol and mono alkyl etherblocked polyol.
(G) Alkyl pyridinium bromide.
(G) Siloxanes and silicones, alkoxy Me,
polymers with Me silsesquioxanes,
alkoxy-terminated industrial coatings,
such as anti-corrosion coatings for
mufflers, ovens, chimneys, oven inserts, barbeques and electric and gas
heaters as well as other large industrial objects and equipment.
(G) Poly(alkyl amine) copolymer.
(G) C16–18 and C18-unsaturated, polymer
with alkyl triol and acid anhydride.
(G) Chlorinated complex ester.
(G) 2,7-Naphthalenedisulfonic acid, 4amino-3-[substituted]-5-hydroxy-6[(1e)-2-phenyldiazenyl]-, lithium salt
(1:3).
(G) Stain block, surfactant, (G) Anionic aqueous fluorochemical disand antiblock agent.
persion.
(S) A curable component
(G) Flexible Polyurethane Methacrylate
of adhesive formulations.
Resin.
(G) A destructive use in
(G) Zinc carboxylate.
the manufacture of coating materials and fuels.
(S) Adhesives for indus(S) 1,4-Dioxane-2,5-dione, 3,6-dimethyltrial packaging applica, (3S,6S)-, polymer with 2-oxepanone.
tions.
(G) Adhesion modifier ...... (G) Hetero substituted alkyl acrylate
polymer.
(G) Intermediate ............... (G) Xanthate reactive hydrophilic polymer.
CBI) on the NOCs received by EPA
during this period: The EPA case
number assigned to the NOC, the date
the NOC was received by EPA, the
projected end date for EPA’s review of
the NOC, and chemical identity.
TABLE II—22 NOCS RECEIVED FROM 04/01/2015 TO 04/29/2015
Case No.
Received date
P–14–0057
P–14–0513
4/7/2015
4/9/2015
VerDate Sep<11>2014
17:26 Jun 01, 2015
Commencement notice
end date
3/10/2015
3/13/2015
Jkt 235001
Chemical
(G) Glycerides, C8-C18 and C18 unsaturated, from algal fermentation.
(G) Bisxylenol diglycidyl ether polymer.
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
E:\FR\FM\02JNN1.SGM
02JNN1
Federal Register / Vol. 80, No. 105 / Tuesday, June 2, 2015 / Notices
31375
TABLE II—22 NOCS RECEIVED FROM 04/01/2015 TO 04/29/2015—Continued
Commencement notice
end date
Case No.
Received date
P–14–0831
4/15/2015
3/19/2015
P–14–0832
4/15/2015
3/19/2015
P–15–0115
P–15–0116
P–15–0131
P–14–0677
P–15–0151
P–14–0571
P–15–0055
4/1/2015
4/1/2015
4/8/2015
4/17/2015
4/3/2015
4/4/2015
4/6/2015
3/25/2015
3/25/2015
3/25/2015
3/25/2015
3/27/2015
3/30/2015
3/31/2015
P–15–0093
P–12–0354
4/20/2015
4/6/2015
4/1/2015
4/2/2015
P–15–0156
P–14–0679
4/10/2015
4/17/2015
4/6/2015
4/6/2015
P–13–0569
P–14–0862
P–15–0108
P–15–0119
P–15–0175
4/14/2015
4/23/2015
4/16/2015
4/16/2015
4/22/2015
4/10/2015
4/10/2015
4/14/2015
4/14/2015
4/14/2015
P–14–0561
J–14–0010
4/24/2015
4/25/2015
4/21/2015
4/15/2015
If you are interested in information
that is not included in these tables, you
may contact EPA as described in Unit
III. to access additional non-CBI
information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: May 27, 2015.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2015–13418 Filed 6–1–15; 8:45 am]
BILLING CODE 6560–50–P
EXPORT-IMPORT BANK OF THE
UNITED STATES
[Public Notice: 2015–0014]
Application for Final Commitment for a
Long-Term Loan or Financial
Guarantee in Excess of $100 Million:
AP088407XX
Export-Import Bank of the
United States.
ACTION: Notice.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
AGENCY:
This Notice is to inform the
public, in accordance with section
3(c)(10) of the Charter of the ExportImport Bank of the United States (‘‘ExIm Bank’’), that Ex-Im Bank has received
an application for final commitment for
a long-term loan or financial guarantee
SUMMARY:
VerDate Sep<11>2014
17:26 Jun 01, 2015
Jkt 235001
Chemical
(G) Fatty acids, polymers with acrylic monomers, bisphenol a, 2-ethoxyethanol, epichlorohydrin
and styrene, alkyl peroxide-initiated, cmpds. with triethylamine.
(G) Fatty acids, polymers with acrylic monomers, bisphenol A, modified oil, epichlorohydrin and
styrene, alkyl peroxide-initiated, compounds with triethylamine.
(G) Phenol-biphenyl-formaldehyde polycondensate.
(G) Polymer of phenol, biphenyl and resorcinol.
(S) Acetic acid ethenyl ester, polymer with 1-ethenyl-2-pyrrolidinone, hydrolyzed*.
(G) Polyester acrylate.
(G) Glycidyl ester methacrylate, polymer with alkyl acrylate, and styrene, 2-propenoate.
(G) Hydroxy tetra alkyl esters of trialkyl alkanoic acid with cycloaminoethanol.
(G) Aromatic isocyanate, polxmer with alkyloxirane polymer with oxirane ether with
polyfunctional alcohol, and alkyloxirane polymer with oxirane ether with triol (3:1).
(G) Aromatic polymer salt.
(S) 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with 1,6-diisocyanatohexane and 5isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, 3,5-dimethyl-1h-pyrazole-and 3hydroxy-2,2-dimethylpropanoic acid-blocked, compds with 2-(dimethylamino) ethanol*.
(G) Amine modified epoxy resin.
(G) 2-(Dimethylamino)ethyl methyl-2-propanoate, polymer with alkyl-substituted methyl-2propanoate and aryl-substituted methyl-2-propanoate, salt with phosphorylated caprolactone,
alkyloxoheteromonocycle and polyalkylene polyol alkyl ether.
(S) 5H-cyclopenta[h]quinazoline, 6,6a,7,8,9,9a-hexahydro-7,7,8,9,9-pentamethyl-*.
(G) Furanose ester.
(G) Urethane acrylate.
(G) Ester acrylate.
(G) Carbamic acid, hydroxyalkyl ester, polymer with hydroxyalkyl carbamate and
alkylisocyanate, alkoxyethanol-blocked.
(S) D-glucopyranose, oligomeric, decyl octyl glycosides, polymers with epichlorohydrin*.
(G) Trichoderma reesei 5347, producing beta-glucosidase.
in excess of $100 million (as calculated
in accordance with section 3(c)(10) of
the Charter). Comments received within
the comment period specified below
will be presented to the Ex-Im Bank
Board of Directors prior to final action
on this Transaction.
DATES: Comments must be received on
or before June 29, 2015 to be assured of
consideration before final consideration
of the transaction by the Board of
Directors of Ex-Im Bank.
ADDRESSES: Comments may be
submitted through Regulations.gov at
WWW.REGULATIONS.GOV. To submit
a comment, enter EIB–2015–0014 under
the heading ‘‘Enter Keyword or ID’’ and
select Search. Follow the instructions
provided at the Submit a Comment
screen. Please include your name,
company name (if any) and EIB–2015–
0014 on any attached document.
Reference: AP088407XX.
Purpose And Use:
Brief description of the purpose of the
transaction:
To support the export of U.S.manufactured commercial aircraft to
Angola.
Brief non-proprietary description of
the anticipated use of the items being
exported:
To be used for long-haul air service
between Angola and China, Brazil,
Europe and South Africa.
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
To the extent that Ex-Im Bank is
reasonably aware, the items being
exported are not expected to produce
exports or provide services in
competition with the exportation of
goods or provision of services by a
United States industry.
Parties:
Principal Supplier: The Boeing
Company
Obligor: Linhas Aereas de Angola,
E.P.—TAAG Angola Airlines
Guarantor(s): The Republic of Angola,
acting through the Ministry of
Finance of the Republic of Angola
Description Of Items Being Exported:
The items being exported are Boeing
777 aircraft.
Information on Decision: Information
on the final decision for this transaction
will be available in the ‘‘Summary
Minutes of Meetings of Board of
Directors’’ on https://exim.gov/
newsandevents/boardmeetings/board/.
Confidential Information: Please note
that this notice does not include
confidential or proprietary business
information; information which, if
disclosed, would violate the Trade
Secrets Act; or information which
would jeopardize jobs in the United
States by supplying information that
E:\FR\FM\02JNN1.SGM
02JNN1
]]>Agencies
[Federal Register Volume 80, Number 105 (Tuesday, June 2, 2015)]
[Notices]
[Pages 31371-31375]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-13418]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2015-0184; FRL-9927-92]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from April 1, 2015 to April 29, 2015.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 2, 2015.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0184, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD, 7407M, Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: 202-564-8593; email
address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that may
apply to this action. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the agency taking?
This document provides receipt and status reports, which cover the
period from April 1, 2015 to April 29, 2015, and consists of the PMNs
and TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the agency's authority for taking this action?
Section 5 of TSCA requires that EPA periodical publish in the
Federal Register receipt and status reports, which cover the following
EPA activities required by provisions of TSCA section 5.
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
[[Page 31372]]
IV. Receipt and Status Reports
In Table I. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
Table I--63 PMNs Received From 04/01/2015 to 04/29/2015
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received notice end Manufacturer/ Use Chemical
date date Importer
----------------------------------------------------------------------------------------------------------------
P-15-0311............ 2/23/2015 5/24/2015 CBI................. (G) Material for (G)
photosensitive Triarylsulfonium
resin. salt with
haloalkyl
phosphate.
P-15-0377............ 4/1/2015 6/30/2015 PCCR USA, Inc....... (S) Plasticizer in (S) 1,2,4-
automotive parts. Benzenetricarboxyl
ic acid, 1,2,4-
trionyl ester.
P-15-0378............ 4/3/2015 7/2/2015 Allnex USA, Inc..... (S) Dual cure/UV (G) Alkoxylated
cure adhesion/ substituted alkyl
barrier coating for alkenoate polymer
wood substrates. with disubstituted
alkane.
P-15-0379............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic
acid.
P-15-0379............ 4/3/2015 7/2/2015 CBI................. (G) Industrial...... (G) Polyitaconic
acid.
P-15-0379............ 4/3/2015 7/202015 CBI................. (G) Home care....... (G) Polyitaconic
acid.
P-15-0380............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic
acid, potassium
salt.
P-15-0381............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic
acid, ammonium
salt.
P-15-0382............ 4/3/2015 7/2/2015 CBI................. (G) Industrial...... (G) Polyitaconic
acid, sodium zinc
salt.
P-15-0383............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic
acid, partially
decarboxylated.
P-15-0384............ 4/6/2015 7/5/2015 CBI................. (G) Open, non- (G) Azo Dyestuff.
dispersive.
P-15-0385............ 4/6/2015 7/5/2015 CBI................. (G) Candle component (G) Hydrogenated
oil.
P-15-0386............ 4/6/2015 7/5/2015 CBI................. (G) Ingredient for (S) 2-cyclohexen-1-
consumer products. ol, 2-methyl-5-(1-
Dispersive use. methylethenyl)-, 1-
acetate, (1r,5r)-
*.
P-15-0389............ 4/8/2015 7/7/2015 Shin Etsu Silicones (S) Silylating agent (S) 2-Propenoic
of America. acid, 2-ethylhexyl
ester, reaction
products with
dimethoxymethylsil
ane.
P-15-0389............ 4/8/2015 7/7/2015 Shin Etsu Silicones (S) Additive for (S) 2-Propenoic
of America. silicone RTV rubber acid, 2-ethylhexyl
compounds. ester, reaction
products with
dimethoxymethylsil
ane.
P-15-0390............ 4/8/2015 7/7/2015 CBI................. (G) Lens material (G) Substituted
for use in carbopolycyclic
electronic dicarboxylic acid
applications. dialkyl ester,
polymer with
dialkyl
carbopolycyclic
ester alkanediol
and
carbopolycyclic
bis (substituted
carbomonocycle).
P-15-0391............ 4/9/2015 7/8/2015 ICL-IP America, Inc. (G) The major (G) Organic salt.
intended use of
BCA13 is as
electrolytes for
energy storage flow
batteries. The
energy storage flow
batteries are for
industries use..
P-15-0392............ 4/9/2015 7/8/2015 Polynt S.p.A........ (S) Plasticizer for (S) 1,2,4-
pvc powders for car Benzenetricarboxyl
interiors. ic acid, mixed
manufacturing; decyl and octyl
plasticizer for pvc triesters*.
compounds for
cables.
P-15-0393............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic
acid, polymer with
Alkanediol,
.alpha.-hydro-
omega.-
ohydroxypoly[oxy(a
lkyl)] and alkyl
aromatic
diisocyanate.
P-15-0394............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic
acid, polymer with
Alkanediol,
.alpha.-hydro-
omega.-
hydroxypoly(oxy-
alkanediyll,
aromaticfurandione
and
alkylaromaticdiiso
cy anate.
P-15-0395............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic
acid, polymer with
Alkanediol,
.alpha.-hydro-
.omega.-
hydroxypoly(oxy-
alkanediyl),
aromaticfuranedion
e and
alkylaromatic
diisocyanate.
P-15-0396............ 4/10/2015 7/9/2015 CBI................. (G) Resin for (G)
automotive coatings. Alkylmethacrylate,
polymer with
alkenylbenzene,
branched
alkylmethacrylate,
hydroxyalkylmethac
rylate and acrylic
acid, T-butyl
alkaneperoxoic
acid ester-
initiated.
[[Page 31373]]
P-15-0397............ 4/10/2015 7/9/2015 CBI................. (G) Industrial roll (G)
coat construction Alkylmethacrylate,
adhesive. polymer with
alkenylbenzene,
branched-
alkylmethacrylate
and
hydroxyalkylmethac
rylate, T-butyl
alkaneperoxoic
acid ester-
initiated.
P-15-0398............ 4/10/2015 7/9/2015 CBI................. (G) Resin for (G) Cycloalkyl
solvent borne dicarboxylic
coatings. anhydride, polymer
with
tetrahydroxyalkyl,
saturated fatty
ester, and
branched alkyl
glycidyl ester.
P-15-0399............ 4/10/2015 7/9/2015 CBI................. (G) Paint component. (G) Alkylbenzene
sulfonic acid salt
of n-(3-
(trialkylamino)alk
yl)alkylacrylamide
, polymer with
alkyl
alkylacrylate and
alkylated
bicycloalkyl
alkylacrylate.
P-15-0400............ 4/10/2015 7/9/2015 CBI................. (G) Paint component. (G) Alkylbenzene
sulfonic acid salt
of n-(3-
(trialkylamino)alk
yl)alkylacrylamide
, polymer with
alkyl
alkylacrylate and
alkylated
bicycloalkyl
alkylacrylate.
P-15-0401............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer resin
formulations.
P-15-0402............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer resin
formulations.
P-15-0403............ 4/11/2015 7/10/2015 Trinity (G) Soil fumigant (G) Ethoxylated
Manufacturing, Inc. additive allowing amine phosphate
emulsification of ester.
liquid soil
fumigants
(dispersive use).
P-15-0404............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer resin
formulations.
P-15-0405............ 4/13/2015 7/12/2015 Evonik Corporation.. (S) Base polymer for (S) Poly[oxy(methyl-
use in parquet 1, 2-ethanediyl)],
adhesive .alpha.-hydro-
formulations; base .omega.-hydroxy-,
polymer for use in polymer with 5-
misc. adhesive isocyanato-1-
formulations. (isocyanatomethyl)-
1,3,3-
trimethylcyclohexa
ne, n-[3-
(trimethoxysily)pr
opyl]-1-butanamine-
blocked*.
P-15-0408............ 4/13/2015 7/12/2015 CBI................. (G) Ingredient in (G) Aqueous
industrial adhesive. polyurethane
dispersion.
P-15-0409............ 4/14/2015 7/13/2015 CBI................. (S) Hydrogen Sulfide (G) Substituted
Scavenger. alkanolamine
ether.
P-15-0410............ 4/14/2015 7/13/2015 CBI................. (G) MDI prepolymer (G) MDI Prepolymer.
for Cast Elastomers.
P-15-0411............ 4/15/2015 7/14/2015 CBI................. (G) Additive in (G) Fatty acid
aqueous solutions. esters with
polyols polyalkyl
ethers.
P-15-0412............ 4/15/2015 7/14/2015 CBI................. (G) Cross Linking (G) Perfluorinated
Agent. alkyl diene.
P-15-0414............ 4/17/2015 7/16/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer resin
formulations.
P-15-0415............ 4/17/2015 7/16/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer resin
formulations.
P-15-0416............ 4/17/2015 7/16/2015 CBI................. (G) Urethane coating (G) Aromatic
isocyanate,
polymer with
aromatic diamine,
alkyloxirane,
alkyloxirane
polymer with
oxirane ether with
alkyltriol (3:1 ),
and oxirane.
P-15-0417............ 4/17/2015 7/16/2015 CBI................. (G) Urethane coating (G) Aromatic
isocyanate,
polymer with
aromatic diamine,
alkyloxirane,
alkyloxirane
polymer with poly
alkylene glycol.
P-15-0418............ 4/17/2015 7/16/2015 CBI................. (S) Water clarifying (G) Alkyl peroxide.
agent, odor control
agent, bleaching.
agent, and general
oxidant for water
treatment.
P-15-0418............ 4/17/2015 7/16/2015 CBI................. (G) Destructive use (G) Alkyl peroxide.
in fuel production.
P-15-0419............ 4/20/2015 7/19/2015 CBI................. (G) Flame retardant (G) 2,2-bis[3',5'-
material. dihaloo-4'-
haloalkyloxy
Carbomonocycle]
propane.
[[Page 31374]]
P-15-0421............ 4/21/2015 7/20/2015 CBI................. (G) Intermediate.... (G) Alkoxysilane.
P-15-0422............ 4/21/2015 7/20/2015 CBI................. (S) Reactive polymer (G) Amine modified
in 2 part epoxy epoxy resin.
adhesive.
P-15-0423............ 4/21/2015 7/20/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane
component of 3D oligomer.
printer.
P-15-0424............ 4/21/2015 ........... Colonial Chemical, (S) Intermediate to (S) D-
Inc. make polymers. glucopyranose,
oligomeric, bu
glycosides,
polymers with
epichlorohydrin*.
P-15-0425............ 4/21/2015 7/20/2015 Colonial Chemical, (S) Intermediate to (S) D-
Inc. make polymers. glucopyranoside,
hexyl, polymer
with 2-
(chloromethyl)
oxirane*.
P-15-0426............ 4/21/2015 7/20/2015 Colonial Chemical, (S) Viscosity (S) Tetradecanoic
Inc. control in hard acid, compd. with
surface cleaners. 1,1'-iminobid [2-
propanol] (1:1)
(9ci)*.
P-15-0427............ 4/22/2015 7/21/2015 CBI................. (G) Resin for (G) Substituted
coatings. alkylene
carbomonocycle,
homopolymer,
substituted polyol
and mono alkyl
ether-blocked
polyol.
P-15-0428............ 4/23/2015 7/22/2015 ICL-IP America, Inc. (G) The major (G) Alkyl
intended use of pyridinium
BCA13 is as bromide.
electrolytes for
energy storage flow
batteries. The
energy storage flow
batteries are for
industries use.
P-15-0429............ 4/23/2015 7/22/2015 CBI................. (G) HAPS free, (G) Siloxanes and
silicone based silicones, alkoxy
resin for the Me, polymers with
manufacture of Me
ambient curing. silsesquioxanes,
alkoxy-terminated
industrial
coatings, such as
anti-corrosion
coatings for
mufflers, ovens,
chimneys, oven
inserts, barbeques
and electric and
gas heaters as
well as other
large industrial
objects and
equipment.
P-15-0430............ 4/23/2015 7/22/2015 CBI................. (G) Papermaking (G) Poly(alkyl
additive. amine) copolymer.
P-15-0431............ 4/24/2015 7/23/2015 CBI................. (G) Alkyd polymeric (G) C16 18 and C18-
additive for unsaturated,
industrial coatings. polymer with alkyl
triol and acid
anhydride.
P-15-0433............ 4/26/2015 7/25/2015 CBI................. (G) Lubricant (G) Chlorinated
additive. complex ester.
P-15-0435............ 4/27/2015 7/26/2015 CBI................. (G) Open, non- (G) 2,7-
dispersive. Naphthalenedisulfo
nic acid, 4-amino-
3-[substituted]-5-
hydroxy-6-[(1e)-2-
phenyldiazenyl]-,
lithium salt
(1:3).
P-15-0436............ 4/28/2015 7/27/2015 CBI................. (G) Stain block, (G) Anionic aqueous
surfactant, and fluorochemical
antiblock agent. dispersion.
P-15-0437............ 4/28/2015 7/27/2015 Henkel Corporation.. (S) A curable (G) Flexible
component of Polyurethane
adhesive Methacrylate
formulations. Resin.
P-15-0438............ 4/29/2015 7/28/2015 CBI................. (G) A destructive (G) Zinc
use in the carboxylate.
manufacture of
coating materials
and fuels.
P-15-0439............ 4/29/2015 7/28/2015 Perstorp Polyols, (S) Adhesives for (S) 1,4-Dioxane-2,5-
Inc. industrial dione, 3,6-
packaging dimethyl-, (3S,6S)-
applications. , polymer with 2-
oxepanone.
P-15-0440............ 4/29/2015 7/28/2015 CBI................. (G) Adhesion (G) Hetero
modifier. substituted alkyl
acrylate polymer.
P-15-0441............ 4/29/2015 7/28/2015 CBI................. (G) Intermediate.... (G) Xanthate
reactive
hydrophilic
polymer.
----------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
Table II--22 NOCs Received From 04/01/2015 to 04/29/2015
------------------------------------------------------------------------
Commencement
Case No. Received date notice end Chemical
date
------------------------------------------------------------------------
P-14-0057........ 4/7/2015 3/10/2015 (G) Glycerides, C8-
C18 and C18
unsaturated, from
algal fermentation.
P-14-0513........ 4/9/2015 3/13/2015 (G) Bisxylenol
diglycidyl ether
polymer.
[[Page 31375]]
P-14-0831........ 4/15/2015 3/19/2015 (G) Fatty acids,
polymers with
acrylic monomers,
bisphenol a, 2-
ethoxyethanol,
epichlorohydrin and
styrene, alkyl
peroxide-initiated,
cmpds. with
triethylamine.
P-14-0832........ 4/15/2015 3/19/2015 (G) Fatty acids,
polymers with
acrylic monomers,
bisphenol A,
modified oil,
epichlorohydrin and
styrene, alkyl
peroxide-initiated,
compounds with
triethylamine.
P-15-0115........ 4/1/2015 3/25/2015 (G) Phenol-biphenyl-
formaldehyde
polycondensate.
P-15-0116........ 4/1/2015 3/25/2015 (G) Polymer of
phenol, biphenyl and
resorcinol.
P-15-0131........ 4/8/2015 3/25/2015 (S) Acetic acid
ethenyl ester,
polymer with 1-
ethenyl-2-
pyrrolidinone,
hydrolyzed*.
P-14-0677........ 4/17/2015 3/25/2015 (G) Polyester
acrylate.
P-15-0151........ 4/3/2015 3/27/2015 (G) Glycidyl ester
methacrylate,
polymer with alkyl
acrylate, and
styrene, 2-
propenoate.
P-14-0571........ 4/4/2015 3/30/2015 (G) Hydroxy tetra
alkyl esters of
trialkyl alkanoic
acid with
cycloaminoethanol.
P-15-0055........ 4/6/2015 3/31/2015 (G) Aromatic
isocyanate, polxmer
with alkyloxirane
polymer with oxirane
ether with
polyfunctional
alcohol, and
alkyloxirane polymer
with oxirane ether
with triol (3:1).
P-15-0093........ 4/20/2015 4/1/2015 (G) Aromatic polymer
salt.
P-12-0354........ 4/6/2015 4/2/2015 (S) 1,3-Propanediol,
2-ethyl-2-
(hydroxymethyl)-,
polymer with 1,6-
diisocyanatohexane
and 5-isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
, 3,5-dimethyl-1h-
pyrazole-and 3-
hydroxy-2,2-
dimethylpropanoic
acid-blocked, compds
with 2-
(dimethylamino)
ethanol*.
P-15-0156........ 4/10/2015 4/6/2015 (G) Amine modified
epoxy resin.
P-14-0679........ 4/17/2015 4/6/2015 (G) 2-
(Dimethylamino)ethyl
methyl-2-propanoate,
polymer with alkyl-
substituted methyl-2-
propanoate and aryl-
substituted methyl-2-
propanoate, salt
with phosphorylated
caprolactone,
alkyloxoheteromonocy
cle and polyalkylene
polyol alkyl ether.
P-13-0569........ 4/14/2015 4/10/2015 (S) 5H-
cyclopenta[h]quinazo
line, 6,6a,7,8,9,9a-
hexahydro-7,7,8,9,9-
pentamethyl-*.
P-14-0862........ 4/23/2015 4/10/2015 (G) Furanose ester.
P-15-0108........ 4/16/2015 4/14/2015 (G) Urethane
acrylate.
P-15-0119........ 4/16/2015 4/14/2015 (G) Ester acrylate.
P-15-0175........ 4/22/2015 4/14/2015 (G) Carbamic acid,
hydroxyalkyl ester,
polymer with
hydroxyalkyl
carbamate and
alkylisocyanate,
alkoxyethanol-
blocked.
P-14-0561........ 4/24/2015 4/21/2015 (S) D-glucopyranose,
oligomeric, decyl
octyl glycosides,
polymers with
epichlorohydrin*.
J-14-0010........ 4/25/2015 4/15/2015 (G) Trichoderma
reesei 5347,
producing beta-
glucosidase.
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit III. to access
additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: May 27, 2015.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2015-13418 Filed 6-1-15; 8:45 am]
BILLING CODE 6560-50-P
