Foreign-Trade Zone 151-Findlay, Ohio; Application for Reorganization: (Expansion of Service Area) Under Alternative Site Framework, 30660 [2015-13034]
Download as PDF
<![CDATA[
Lhorne on DSK2VPTVN1PROD with NOTICES
30660
Federal Register / Vol. 80, No. 103 / Friday, May 29, 2015 / Notices
LED remote controls; wire; cord sets <
1000 volts; electrical wiring ≤ 80 volts;
quick connectors; electrical insulators;
ring fittings; tube fittings; wall sconces;
chandeliers; suspended chandeliers;
pendant lamps; fixture wall sconces;
electric household lamps; electric table
lamps; electric candelabras; electric
floor standing lamps; wall mount light
fixtures; high intensity discharge lamp
fixtures; halogen lamp fixtures; candle
candelabras; candle lamp fixtures; LED
illuminated paneling; LED illuminated
wall mounts; lamp illuminated
paneling; lamp illuminated wall
mounts; lighted signs; lead crystals;
glass globes; hurricane shades; glass;
glass parts of chandeliers and wall
sconces (beads, bobeches, ball sticks,
drops, pendants, ovals, candle cups,
bowls, bulb covers, columns, scallops,
dishes, disks, finials, glass arms, rods,
cubes, cylinders, scrolls, sickles, spikes,
tulips, prisms, rosettes, lenses, leafs,
and electrical housings); glass parts of
table, floor and desk lamps (beads,
trimsets, bobeches, ball sticks, drops,
pendants, ovals, candle cups, bowls,
bulb covers, columns, scallops, dishes
and disks, finials, glass arms, rods,
cubes, cylinders, scrolls, sickles, spikes,
tulips, trumpets, prisms, rosettes,
lenses, and leafs); plastic lamp parts
(sleeves, trays, covers, trumpets,
electrical housing, silicone shades, and
silicone end caps); brass lamp parts
(scrolls, arms, covers, extenders, sconce
plates, bodies, bases, finials, bobeches,
connectors, hangers, and cups); chrome
ferrules and screw sets; other parts of
lamps (scrolls, arms, covers, extenders,
sconce plates, brass body, bases, finials,
bobeches, connectors, hangers, cups,
rings, and shafts); fixture extensions;
´
decor disk rings; LED repair kits; and,
aluminum reflectors (duty rates range
from free to 14.9%). The request
indicates that foreign textile material
(including netting classified within
HTSUS Subheading 5408.10) will be
admitted to the zone in privileged
foreign status (19 CFR 146.41), thereby
precluding inverted tariff benefits on
this material.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is July 8,
2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
VerDate Sep<11>2014
15:17 May 28, 2015
Jkt 235001
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov or
(202) 482–1367.
Dated: May 22, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015–13035 Filed 5–28–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–33–2015]
Foreign-Trade Zone 151—Findlay,
Ohio; Application for Reorganization:
(Expansion of Service Area) Under
Alternative Site Framework
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Findlay Hancock County Chamber
of Commerce, grantee of Foreign-Trade
Zone 151, requesting authority to
reorganize the zone to expand its service
area under the alternative site
framework (ASF) adopted by the FTZ
Board (15 CFR Sec. 400.2(c)). The ASF
is an option for grantees for the
establishment or reorganization of zones
and can permit significantly greater
flexibility in the designation of new
subzones or ‘‘usage-driven’’ FTZ sites
for operators/users located within a
grantee’s ‘‘service area’’ in the context of
the FTZ Board’s standard 2,000-acre
activation limit for a zone. The
application was submitted pursuant to
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the FTZ Board (15 CFR
part 400). It was formally docketed on
May 21, 2015.
FTZ 151 was approved by the Board
on July 6, 1988 (Board Order 389, 53 FR
27058, 7/18/1988) and reorganized
under the ASF on August 29, 2012
(Board Order 1855, 77 FR 55182–55183,
9/7/2012). The zone currently has a
service area that includes Hardin,
Putnam, Seneca, Allen and Hancock
Counties, Ohio.
The applicant is now requesting
authority to expand the service area of
the zone to include Van Wert County, as
described in the application. If
approved, the grantee would be able to
serve sites throughout the expanded
service area based on companies’ needs
for FTZ designation. The proposed
expanded service area is adjacent to the
Toledo-Sandusky Customs and Border
Protection Port of Entry
In accordance with the FTZ Board’s
regulations, Elizabeth Whiteman of the
PO 00000
Frm 00010
Fmt 4703
Sfmt 4703
FTZ Staff is designated examiner to
evaluate and analyze the facts and
information presented in the application
and case record and to report findings
and recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is July
28, 2015. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
August 12, 2015.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz. For further
information, contact Elizabeth
Whiteman at Elizabeth.Whiteman@
trade.gov or (202) 482–0473.
Dated: May 21, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–13034 Filed 5–28–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–05–2015]
Foreign-Trade Zone (FTZ) 41—
Milwaukee, Wisconsin; Authorization
of Production Activity: CNH Industrial
America, LLC; Subzone 41I (4-Wheel
Drive Axle Subassemblies), Racine,
Wisconsin
On January 20, 2015, CNH Industrial
America, LLC, submitted a notification
of proposed production activity to the
Foreign-Trade Zones (FTZ) Board for its
facility within Subzone 41I, in Racine,
Wisconsin.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (80 FR 6040, 02–04–
2015). The FTZ Board has determined
that no further review of the activity is
warranted at this time. The production
activity described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
E:\FR\FM\29MYN1.SGM
29MYN1
]]>Agencies
[Federal Register Volume 80, Number 103 (Friday, May 29, 2015)]
[Notices]
[Page 30660]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-13034]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-33-2015]
Foreign-Trade Zone 151--Findlay, Ohio; Application for
Reorganization: (Expansion of Service Area) Under Alternative Site
Framework
An application has been submitted to the Foreign-Trade Zones (FTZ)
Board by the Findlay Hancock County Chamber of Commerce, grantee of
Foreign-Trade Zone 151, requesting authority to reorganize the zone to
expand its service area under the alternative site framework (ASF)
adopted by the FTZ Board (15 CFR Sec. 400.2(c)). The ASF is an option
for grantees for the establishment or reorganization of zones and can
permit significantly greater flexibility in the designation of new
subzones or ``usage-driven'' FTZ sites for operators/users located
within a grantee's ``service area'' in the context of the FTZ Board's
standard 2,000-acre activation limit for a zone. The application was
submitted pursuant to the Foreign-Trade Zones Act, as amended (19
U.S.C. 81a-81u), and the regulations of the FTZ Board (15 CFR part
400). It was formally docketed on May 21, 2015.
FTZ 151 was approved by the Board on July 6, 1988 (Board Order 389,
53 FR 27058, 7/18/1988) and reorganized under the ASF on August 29,
2012 (Board Order 1855, 77 FR 55182-55183, 9/7/2012). The zone
currently has a service area that includes Hardin, Putnam, Seneca,
Allen and Hancock Counties, Ohio.
The applicant is now requesting authority to expand the service
area of the zone to include Van Wert County, as described in the
application. If approved, the grantee would be able to serve sites
throughout the expanded service area based on companies' needs for FTZ
designation. The proposed expanded service area is adjacent to the
Toledo-Sandusky Customs and Border Protection Port of Entry
In accordance with the FTZ Board's regulations, Elizabeth Whiteman
of the FTZ Staff is designated examiner to evaluate and analyze the
facts and information presented in the application and case record and
to report findings and recommendations to the FTZ Board.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is July 28, 2015.
Rebuttal comments in response to material submitted during the
foregoing period may be submitted during the subsequent 15-day period
to August 12, 2015.
A copy of the application will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz. For
further information, contact Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202) 482-0473.
Dated: May 21, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-13034 Filed 5-28-15; 8:45 am]
BILLING CODE 3510-DS-P
