Airworthiness Directives; The Boeing Company Airplanes, 27601-27605 [2015-10469]

Download as PDF 27601 Proposed Rules Federal Register Vol. 80, No. 93 Thursday, May 14, 2015 This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. DEPARTMENT OF ENERGY 10 CFR Part 431 [EERE–2013–BT–STD–0006] Commercial Fans and Blowers Working Group: Notice of Open Meeting Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of open meetings. AGENCY: DOE announces a series of meetings of the Fans and Blowers Working Group. The Federal Advisory Committee Act requires that agencies publish notice of an advisory committee meeting in the Federal Register. DATES: See SUPPLEMENTARY INFORMATION section for meeting dates. ADDRESSES: Unless otherwise specified above, the meetings will be held at U.S. Department of Energy, Forrestal Building, 1000 Independence Avenue SW., Washington, DC 20585. Individuals will also have the opportunity to participate by webinar. To register for the webinar and receive call-in information, please register at https://www1.eere.energy.gov/buildings/ appliance_standards/ rulemaking.aspx?ruleid=25. SUMMARY: John Cymbalsky, ASRAC Designated Federal Officer, U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, 950 L’Enfant Plaza SW., Washington, DC 20024. Email: asrac@ee.doe.gov. SUPPLEMENTARY INFORMATION: The meetings will be held: • May 18–19, 2015; • June 3–4, 2015 (950 L’Enfant Plaza, 7th Floor, SW., Washington, DC) • June 22, 2015; • June 23, 2015 (950 L’Enfant Plaza, 7th Floor, SW., Washington, DC) • July 21–22, 2015 (Air Movement and Control Association International, Chicago IL area) and • August 4–5, 2015 tkelley on DSK3SPTVN1PROD with PROPOSALS FOR FURTHER INFORMATION CONTACT: VerDate Sep<11>2014 17:00 May 13, 2015 Jkt 235001 Members of the public are welcome to observe the business of the meeting and, if time allows, may make oral statements during the specified period for public comment. To attend the meeting and/or to make oral statements regarding any of the items on the agenda, email asrac@ee.doe.gov. In the email, please indicate your name, organization (if appropriate), citizenship, and contact information. Please note that foreign nationals participating in the public meeting are subject to advance security screening procedures which require advance notice prior to attendance at the public meeting. If a foreign national wishes to participate in the public meeting, please inform DOE as soon as possible by contacting Ms. Regina Washington at (202) 586–1214 or by email: Regina.Washington@ee.doe.gov so that the necessary procedures can be completed. Anyone attending the meeting will be required to present a government photo identification, such as a passport, driver’s license, or government identification. Due to the required security screening upon entry, individuals attending should arrive early to allow for the extra time needed. Due to the REAL ID Act implemented by the Department of Homeland Security (DHS) recent changes regarding ID requirements for individuals wishing to enter Federal buildings from specific states and U.S. territories. Driver’s licenses from the following states or territory will not be accepted for building entry and one of the alternate forms of ID listed below will be required. DHS has determined that regular driver’s licenses (and ID cards) from the following jurisdictions are not acceptable for entry into DOE facilities: Alaska, Louisiana, New York, American Samoa, Maine, Oklahoma, Arizona, Massachusetts, Washington, and Minnesota. Acceptable alternate forms of PhotoID include: U.S. Passport or Passport Card; an Enhanced Driver’s License or Enhanced ID-Card issued by the states of Minnesota, New York or Washington (Enhanced licenses issued by these states are clearly marked Enhanced or Enhanced Driver’s License); A military ID or other Federal government issued Photo-ID card. Docket: The docket is available for review at www.regulations.gov, PO 00000 Frm 00001 Fmt 4702 Sfmt 4702 including Federal Register notices, public meeting attendee lists and transcripts, comments, and other supporting documents/materials. All documents in the docket are listed in the www.regulations.gov index. However, not all documents listed in the index may be publicly available, such as information that is exempt from public disclosure. Issued in Washington, DC, on May 8, 2015. Kathleen B. Hogan, Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy. [FR Doc. 2015–11663 Filed 5–13–15; 8:45 am] BILLING CODE 6450–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–1273; Directorate Identifier 2014–NM–194–AD] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This proposed AD was prompted by reports of unreliable performance of the fuel scavenge system. This proposed AD would require changing the main fuel tank water scavenge system, center fuel tank fuel scavenge system, certain electrical panels; related investigative actions, and corrective actions if necessary; and for certain airplanes, changing to give redundant control of the center override/jettison fuel pumps and main jettison fuel pumps. We are proposing this AD to prevent fuel exhaustion and subsequent power loss of all engines due to loss of capability to scavenge fuel in the center fuel tank. DATES: We must receive comments on this proposed AD by June 29, 2015. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: SUMMARY: E:\FR\FM\14MYP1.SGM 14MYP1 27602 Federal Register / Vol. 80, No. 93 / Thursday, May 14, 2015 / Proposed Rules • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For Boeing service information identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H–65, Seattle, WA 98124–2207; telephone 206–544–5000, extension 1; fax 206–766–5680; Internet https://www.myboeingfleet.com. For GE Aviation service information identified in this proposed AD, contact GE Aviation Fleet Support, 1 Neumann Way, Cincinnati, OH 45215; telephone 513–552–3272; Email: aviation.fleetsupport@ge.com; Internet https://www.geaviation.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, Washington. For information on the availability of this material at the FAA, call 425–227–1221. Boeing service information is also available on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 1273. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 1273; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (phone: 800–647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. Tak Kobayashi, Aerospace Engineer, Propulsion Branch, ANM–140S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue SW., Renton, WA 98057–3356; phone: 425–917–6499; fax: 425–917–6590; email: Takahisa.Kobayashi@faa.gov. tkelley on DSK3SPTVN1PROD with PROPOSALS FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: VerDate Sep<11>2014 17:00 May 13, 2015 Jkt 235001 Comments Invited We invite you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA– 2015–1273; Directorate Identifier 2014– NM–194–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD because of those comments. We will post all comments we receive, without change, to https:// www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD. Discussion We have received reports of unreliable performance of the fuel scavenge system. During flight, any water in the fuel can sink to the bottom of the fuel tank. This water can enter the fuel scavenge inlets and can then freeze as it travels from the body center fuel tank into the colder fuel scavenge tubes in the left and right cheek center fuel tanks. The flow of scavenge fuel from the center fuel tank to the main fuel tanks can then decrease or stop. When this occurs, as much as 2,600 pounds of fuel can remain unavailable during flight. On airplanes with airplane information management system (AIMS) version 13 or older, this can occur without warning. If the fuel quantity decreases to the quantity of the unavailable fuel, then in-flight shutdown of both engines could occur. Related Service Information Under 1 CFR Part 51 We reviewed Boeing Special Attention Service Bulletin 777–28– 0078, dated September 4, 2014. This service bulletin describes a main fuel tank water scavenge system change and a center fuel tank fuel scavenge system change. We also reviewed Boeing Service Bulletin 777–28A0047, Revision 5, dated September 20, 2010, and Revision 6, dated July 11, 2013, which describe changes to give redundant control of the center override/jettison fuel pumps and main jettison fuel pumps. We also reviewed GE Aviation Service Bulletin 5000ELM–28–075, Revision 1, dated August 5, 2014, and GE Aviation Service Bulletin 6000ELM–28–076, Revision 1, dated August 5, 2014, which PO 00000 Frm 00002 Fmt 4702 Sfmt 4702 describe wiring changes in the P110 and P210 panels, respectively. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section of this NPRM. Concurrent Actions For airplanes in Group 10, Configuration 1, Boeing Special Attention Service Bulletin 777–28– 0078, dated September 4, 2014, specifies prior accomplishment of the actions described in Boeing Service Bulletin 777–28–0060, dated January 30, 2009; Revision 1, dated October 2, 2009; or Revision 2, dated January 08, 2010; which describe single aft auxiliary fuel tank removal and cargo system installation. Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, does not address the configuration of airplanes with the auxiliary fuel tank installed. Group 10 airplanes were delivered with the auxiliary fuel tank installed, and therefore the actions specified in Boeing Special Attention Service Bulletin 777– 28–0078, dated September 4, 2014, cannot be accomplished on those airplanes unless the auxiliary fuel tank is removed. This proposed AD does not require removal of the auxiliary fuel tank from airplanes in Group 10, Configuration 1, in accordance with the actions specified in Boeing Service Bulletin 777–28–0060, dated January 30, 2009; Revision 1, dated October 2, 2009; or Revision 2, dated January 08, 2010. However, if the auxiliary fuel tank is removed, this proposed AD requires accomplishment of the actions specified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, prior to the threshold or concurrent with the auxiliary tank removal, and prohibits re-installation of the auxiliary fuel tank thereafter. Once modifications are developed and approved to address an airplane configuration having an auxiliary fuel tank installed, we might consider additional rulemaking to address the fuel scavenge system in those airplanes. For airplanes in Group 10, Configuration 2, Boeing Special Attention Service Bulletin 777–28– 0078, dated September 4, 2014, specifies prior accomplishment of the actions described in Work Package 2 of the Accomplishment Instructions of Boeing Service Bulletin 777–28–0062, dated June 30, 2009; or Revision 1, dated November 18, 2010; which describes removal of one body auxiliary fuel tank (Work Package 1 describes installation of the auxiliary fuel tank). Boeing E:\FR\FM\14MYP1.SGM 14MYP1 Federal Register / Vol. 80, No. 93 / Thursday, May 14, 2015 / Proposed Rules Special Attention Service Bulletin 777– 28–0078, dated September 4, 2014, does not address the configuration of airplanes with the auxiliary fuel tank installed. Group 10 airplanes are delivered with the auxiliary fuel tank installed, and therefore, the actions specified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, cannot be accomplished on those airplanes unless the auxiliary fuel tank is removed. This proposed AD does not require removal of the auxiliary fuel tank from airplanes in Group 10, Configuration 2, in accordance with the actions specified in Work Package 2 of the Accomplishment Instructions of Boeing Service Bulletin 777–28–0062, dated June 30, 2009; or Revision 1, dated November 18, 2010. However, if the auxiliary fuel tank is removed, this proposed AD requires accomplishment of the actions specified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, prior to the threshold or concurrent with the auxiliary tank removal, and prohibits re-installation of the auxiliary fuel tank thereafter. Once modifications are developed and approved to address an airplane configuration having an auxiliary fuel tank installed, we might consider additional rulemaking to address the fuel scavenge system in those airplanes. Related Rulemaking AD 2011–09–05, Amendment 39– 16667 (77 FR 22305, April 21, 2011), specifies the actions described in Boeing Service Bulletin 777–28A0047, Revision 5, dated September 20, 2010. For certain airplanes, the actions described in this service bulletin must be done prior to the accomplishment of the actions described in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014. FAA’s Determination We are proposing this AD because we evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop in other products of these same type designs. Proposed AD Requirements This proposed AD would require accomplishing the actions specified in the service information described previously, except as discussed under ‘‘Differences Between this Proposed AD and the Service Information.’’ The phrase ‘‘related investigative actions’’ might be used in this proposed AD. ‘‘Related investigative actions’’ are follow-on actions that: (1) Are related to the primary actions, and (2) are actions that further investigate the nature of any condition found. Related investigative actions in an AD could include, for example, inspections. In addition, the phrase ‘‘corrective actions’’ might be used in this proposed AD. ‘‘Corrective actions’’ are actions that correct or address any condition found. Corrective actions in an AD could include, for example, repairs. Explanation of ‘‘RC’’ Steps in Service Information The FAA worked in conjunction with industry, under the Airworthiness 27603 Directive Implementation Aviation Rulemaking Committee (ARC), to enhance the AD system. One enhancement was a new process for annotating which steps in the service information are required for compliance with an AD. Differentiating these steps from other tasks in the service information is expected to improve an owner’s/operator’s understanding of crucial AD requirements and help provide consistent judgment in AD compliance. The steps identified as RC (required for compliance) in any service information identified previously have a direct effect on detecting, preventing, resolving, or eliminating an identified unsafe condition. Steps that are identified as RC in any service information must be done to comply with the proposed AD. However, steps that are not identified as RC are recommended. Those steps that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an alternative method of compliance (AMOC), provided the steps identified as RC can be done and the airplane can be put back in a serviceable condition. Any substitutions or changes to steps identified as RC will require approval of an AMOC. Costs of Compliance We estimate that this proposed AD affects 55 airplanes of U.S. registry. We estimate the following costs to comply with this proposed AD: ESTIMATED COSTS Labor cost Fuel system modification ................................ P110 and P210 panel modification ................. tkelley on DSK3SPTVN1PROD with PROPOSALS Action 200 work-hours × $85 per hour = $17,000 .... 2 work-hours × $85 per hour = $170 ............. We have received no definitive data that would enable us to provide cost estimates for the on-condition actions specified in this proposed AD. According to the manufacturer, some of the costs of this proposed AD may be covered under warranty, thereby reducing the cost impact on affected individuals. We do not control warranty coverage for affected individuals. As a result, we have included all costs in our cost estimate. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, VerDate Sep<11>2014 17:00 May 13, 2015 Jkt 235001 Parts cost section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 $68,535 0 Cost per product $85,535 170 Cost on U.S. operators $4,704,425 9,350 that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: E:\FR\FM\14MYP1.SGM 14MYP1 27604 Federal Register / Vol. 80, No. 93 / Thursday, May 14, 2015 / Proposed Rules (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ The Boeing Company: Docket No. FAA– 2015–1273; Directorate Identifier 2014– NM–194–AD. (a) Comments Due Date We must receive comments by June 29, 2015. (b) Affected ADs None. (c) Applicability This AD applies to The Boeing Company Model 777–200, –200LR, –300, –300ER, and –777F series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014. tkelley on DSK3SPTVN1PROD with PROPOSALS (d) Subject Air Transport Association (ATA) of America Code 28, Fuel. (e) Unsafe Condition This AD was prompted by reports of unreliable performance of the fuel scavenge system. We are issuing this AD to prevent fuel exhaustion and subsequent power loss of all engines due to loss of capability to scavenge fuel in the center fuel tank. (f) Compliance Comply with this AD within the compliance times specified, unless already done. VerDate Sep<11>2014 17:00 May 13, 2015 Jkt 235001 (g) Fuel Scavenge System Changes, Wiring Changes, and Software Changes For airplanes identified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, except for Group 10 airplanes on which the actions specified in Boeing Service Bulletin 777–28–0060; or Work Package 2 of the Accomplishment Instructions of Boeing Service Bulletin 777– 28–0062, have not been accomplished: Within 60 months after the effective date of this AD, do the applicable actions specified in paragraphs (g)(1) through (g)(6) of this AD; and do all applicable related investigative and corrective actions; in accordance with the Accomplishment Instructions of Boeing Special Attention Service Bulletin 777–28– 0078, dated September 4, 2014. Do all applicable related investigative and corrective actions before further flight. (1) Do applicable mechanical changes to the main fuel tank water scavenge system and center fuel tank fuel scavenge system. (2) Install relays and related equipment on the P301 and P302 panels in the main equipment center. (3) Do applicable wiring changes between the P105, P110 and P301 panels, and between the P200, P205, P210 and P302 panels. (4) Do wiring changes in the P105 panel. (5) Install new electrical load management system 2 (ELMS2) software. (6) Do a functional test consisting of operational tests, a leak test, system tests, and a fuel scavenge system functional test. If any of the tests fail, before further flight accomplish corrective actions and repeat the test and applicable corrective actions until the test is passed. (h) Concurrent Actions (1) For Group 13 through 16 airplanes, as identified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, prior to accomplishing the actions required by paragraph (g) of this AD, install a new P301 panel on the left side of the airplane, install a new P302 panel on the right side of the airplane, and change the wiring; or perform bonding resistance measurements and rework the airplane installations; as applicable; in accordance with the Accomplishment Instructions of Boeing Service Bulletin 777–28A0047, Revision 5, dated September 20, 2010; or Boeing Service Bulletin 777–28A0047, Revision 6, dated July 11, 2013. (2) For airplanes identified in Boeing Special Attention Service Bulletin 777–28– 0078, dated September 4, 2014, except for Group 10 airplanes on which the actions described in Boeing Service Bulletin 777–28– 0060; or Work Package 2 of the Accomplishment Instructions of Boeing Service Bulletin 777–28–0062, have not been accomplished: Prior to or concurrently with accomplishing the requirements of paragraph (g) of this AD, do wiring changes in the P110 and P210 panels, in accordance with the applicable Accomplishment Instructions of GE Aviation Service bulletin 5000ELM–28– 075, Revision 1, dated August 5, 2014; and GE Aviation Service Bulletin 6000ELM–28– 076, Revision 1, dated August 5, 2014. PO 00000 Frm 00004 Fmt 4702 Sfmt 4702 (i) Parts Installation Prohibition For Group 10 airplanes, as identified in Boeing Special Attention Service Bulletin 777–28–0078, dated September 4, 2014, after completion of the actions required by paragraph (g) of this AD, no person may install an auxiliary fuel tank on any Group 10 airplane. (j) Credit for Previous Actions This paragraph provides credit for actions required by paragraph (h)(1) of this AD, if those actions were performed before May 26, 2011 (the effective date of AD 2011–09–05, Amendment 39–16667 (77 FR 22305, April 21, 2011)) using a service bulletin identified in paragraph (j)(1) or (j)(2) of this AD, which are not incorporated by reference in this AD. (1) Boeing Service Bulletin 777–28A0047, Revision 3, dated June 11, 2009. (2) Boeing Service Bulletin 777–28A0047, Revision 4, dated May 20, 2010. (k) Alternative Methods of Compliance (AMOCs) (1) The Manager, Seattle Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the ACO, send it to the attention of the person identified in paragraph (k)(1) of this AD. Information may be emailed to: 9-ANM-Seattle-ACO-AMOCRequests@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (3) An AMOC that provides an acceptable level of safety may be used for any repair required by this AD if it is approved by the Boeing Commercial Airplanes Organization Designation Authorization (ODA) that has been authorized by the Manager, Seattle ACO, to make those findings. For a repair method to be approved, the repair must meet the certification basis of the airplane, and the approval must specifically refer to this AD. (4) If any service information contains steps that are identified as RC (Required for Compliance), those steps must be done to comply with this AD; any steps that are not identified as RC are recommended. Those steps that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the steps identified as RC can be done and the airplane can be put back in a serviceable condition. Any substitutions or changes to steps identified as RC require approval of an AMOC. (l) Related Information (1) For more information about this AD, Tak Kobayashi, Aerospace Engineer, Propulsion Branch, ANM–140S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue SW., Renton, WA 98057–3356; phone: 425–917–6499; fax: 425–917–6590; email: Takahisa.Kobayashi@faa.gov. E:\FR\FM\14MYP1.SGM 14MYP1 Federal Register / Vol. 80, No. 93 / Thursday, May 14, 2015 / Proposed Rules (2) For Boeing service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H–65, Seattle, WA 98124–2207; telephone 206–544–5000, extension 1; fax 206–766– 5680; Internet https:// www.myboeingfleet.com. For GE Aviation service information identified in this proposed AD, contact GE Aviation Fleet Support, 1 Neumann Way, Cincinnati, OH 45215; telephone 513–552–3272; Email: aviation.fleetsupport@ge.com; Internet https:// www.geaviation.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, Washington. For information on the availability of this material at the FAA, call 425–227–1221. Issued in Renton, Washington, on April 28, 2015. Michael Kaszycki, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2015–10469 Filed 5–13–15; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–1480; Directorate Identifier 2014–SW–071–AD] RIN 2120–AA64 Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France) Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to supersede airworthiness directive (AD) 2002–13– 11 for Eurocopter France (now Airbus Helicopters) Model EC120B helicopters. AD 2002–13–11 currently requires installing front and side covers on the cabin floor to protect the yaw control at both the pilot and co-pilot stations. Since we issued AD 2002–13–11, we have determined that the required actions should apply only to the cabin’s right-hand pilot station. This proposed AD would retain the requirements of AD 2002–13–11 but for only the pilot station. These proposed actions are intended to prevent an object from sliding between the canopy and the cabin floor, loss of yaw control, and subsequent loss of helicopter control. DATES: We must receive comments on this proposed AD by July 13, 2015. ADDRESSES: You may send comments by any of the following methods: tkelley on DSK3SPTVN1PROD with PROPOSALS SUMMARY: VerDate Sep<11>2014 17:00 May 13, 2015 Jkt 235001 • Federal eRulemaking Docket: Go to https://www.regulations.gov. Follow the online instructions for sending your comments electronically. • Fax: 202–493–2251. • Mail: Send comments to the U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590–0001. • Hand Delivery: Deliver to the ‘‘Mail’’ address between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov or in person at the Docket Operations Office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the Direction Generale De L’Aviation Civile (DGAC) AD, the economic evaluation, and other information. The street address for the Docket Operations Office (telephone 800–647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. For service information identified in this proposed AD, contact Airbus Helicopters, Inc., 2701 N. Forum Drive, Grand Prairie, TX 75052; telephone (972) 641–0000 or (800) 232–0323; fax (972) 641–3775; or at https:// www.airbushelicopters.com/techpub. You may review service information at the FAA, Office of the Regional Counsel, Southwest Region, 2601 Meacham Blvd., Room 663, Fort Worth, Texas 76137. FOR FURTHER INFORMATION CONTACT: Robert Grant, Aviation Safety Engineer, Safety Management Group, FAA, 2601 Meacham Blvd., Fort Worth, Texas 76137; telephone (817) 222–5110; email robert.grant@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to participate in this rulemaking by submitting written comments, data, or views. We also invite comments relating to the economic, environmental, energy, or federalism impacts that might result from adopting the proposals in this document. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are PO 00000 Frm 00005 Fmt 4702 Sfmt 4702 27605 filed electronically, commenters should submit only one time. We will file in the docket all comments that we receive, as well as a report summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before acting on this proposal, we will consider all comments we receive on or before the closing date for comments. We will consider comments filed after the comment period has closed if it is possible to do so without incurring expense or delay. We may change this proposal in light of the comments we receive. Discussion On June 25, 2002, we issued AD 2002–13–11, Amendment 39–12799 (67 FR 45295, July 9, 2002) for certain serial-numbered Eurocopter France (now Airbus Helicopters) Model EC120B helicopters. AD 2002–13–11 requires installing front and side covers to protect the yaw control at the pilot and co-pilot flight control stations. AD 2002–13–11 was prompted by a report of a mobile phone falling between the windshield canopy and the cabin floor, jamming the yaw control pedal. Those actions were intended to prevent an object from sliding between the canopy and the cabin floor, loss of yaw control, and subsequent loss of helicopter control. AD 2002–13–11 was prompted by AD No. 2001–386–007(A), dated September 5, 2001, issued by the DGAC, the airworthiness authority for France, to correct an unsafe condition for the Model EC120B helicopter. The DGAC advises of a yaw-control jamming caused by an object that slid between the canopy and the cabin floor. The DGAC AD required that front and lateral protections be installed no later than December 31, 2001, in compliance with paragraph 2.B of Eurocopter Alert Service Bulletin No. 67A005, Revision 0, dated July 30, 2001. DGAC revised its AD and issued AD 2001–386–007(A) R1, dated February 6, 2002 (AD 2001–386– 007(A)R1), which extended the compliance deadline to February 28, 2002. Actions Since AD 2002–13–11 Was Issued Since we issued AD 2002–13–11 (67 FR 45295, July 9, 2002), we have determined that the front and side protections are required only at the pilot station. Therefore, we are proposing to remove the final sentence in paragraph (a) of the Compliance section of the AD, which requires that if the helicopter has flight controls at both the pilot and copilot stations, the protections must be E:\FR\FM\14MYP1.SGM 14MYP1

Agencies

[Federal Register Volume 80, Number 93 (Thursday, May 14, 2015)]
[Proposed Rules]
[Pages 27601-27605]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-10469]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2015-1273; Directorate Identifier 2014-NM-194-AD]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
certain The Boeing Company Model 777 airplanes. This proposed AD was 
prompted by reports of unreliable performance of the fuel scavenge 
system. This proposed AD would require changing the main fuel tank 
water scavenge system, center fuel tank fuel scavenge system, certain 
electrical panels; related investigative actions, and corrective 
actions if necessary; and for certain airplanes, changing to give 
redundant control of the center override/jettison fuel pumps and main 
jettison fuel pumps. We are proposing this AD to prevent fuel 
exhaustion and subsequent power loss of all engines due to loss of 
capability to scavenge fuel in the center fuel tank.

DATES: We must receive comments on this proposed AD by June 29, 2015.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:

[[Page 27602]]

     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For Boeing service information identified in this proposed AD, 
contact Boeing Commercial Airplanes, Attention: Data & Services 
Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone 
206-544-5000, extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com.
    For GE Aviation service information identified in this proposed AD, 
contact GE Aviation Fleet Support, 1 Neumann Way, Cincinnati, OH 45215; 
telephone 513-552-3272; Email: aviation.fleetsupport@ge.com; Internet 
https://www.geaviation.com.
    You may view this referenced service information at the FAA, 
Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
Washington. For information on the availability of this material at the 
FAA, call 425-227-1221. Boeing service information is also available on 
the Internet at https://www.regulations.gov by searching for and 
locating Docket No. FAA-2015-1273.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2015-
1273; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Office (phone: 800-647-5527) is in the ADDRESSES section. Comments will 
be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Tak Kobayashi, Aerospace Engineer, 
Propulsion Branch, ANM-140S, FAA, Seattle Aircraft Certification 
Office, 1601 Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-
6499; fax: 425-917-6590; email: Takahisa.Kobayashi@faa.gov.

SUPPLEMENTARY INFORMATION: 

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under the ADDRESSES section. Include ``Docket No. FAA-2015-1273; 
Directorate Identifier 2014-NM-194-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD because of those comments.
    We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We 
will also post a report summarizing each substantive verbal contact we 
receive about this proposed AD.

Discussion

    We have received reports of unreliable performance of the fuel 
scavenge system. During flight, any water in the fuel can sink to the 
bottom of the fuel tank. This water can enter the fuel scavenge inlets 
and can then freeze as it travels from the body center fuel tank into 
the colder fuel scavenge tubes in the left and right cheek center fuel 
tanks. The flow of scavenge fuel from the center fuel tank to the main 
fuel tanks can then decrease or stop. When this occurs, as much as 
2,600 pounds of fuel can remain unavailable during flight. On airplanes 
with airplane information management system (AIMS) version 13 or older, 
this can occur without warning. If the fuel quantity decreases to the 
quantity of the unavailable fuel, then in-flight shutdown of both 
engines could occur.

Related Service Information Under 1 CFR Part 51

    We reviewed Boeing Special Attention Service Bulletin 777-28-0078, 
dated September 4, 2014. This service bulletin describes a main fuel 
tank water scavenge system change and a center fuel tank fuel scavenge 
system change.
    We also reviewed Boeing Service Bulletin 777-28A0047, Revision 5, 
dated September 20, 2010, and Revision 6, dated July 11, 2013, which 
describe changes to give redundant control of the center override/
jettison fuel pumps and main jettison fuel pumps.
    We also reviewed GE Aviation Service Bulletin 5000ELM-28-075, 
Revision 1, dated August 5, 2014, and GE Aviation Service Bulletin 
6000ELM-28-076, Revision 1, dated August 5, 2014, which describe wiring 
changes in the P110 and P210 panels, respectively.
    This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section of this 
NPRM.

Concurrent Actions

    For airplanes in Group 10, Configuration 1, Boeing Special 
Attention Service Bulletin 777-28-0078, dated September 4, 2014, 
specifies prior accomplishment of the actions described in Boeing 
Service Bulletin 777-28-0060, dated January 30, 2009; Revision 1, dated 
October 2, 2009; or Revision 2, dated January 08, 2010; which describe 
single aft auxiliary fuel tank removal and cargo system installation. 
Boeing Special Attention Service Bulletin 777-28-0078, dated September 
4, 2014, does not address the configuration of airplanes with the 
auxiliary fuel tank installed. Group 10 airplanes were delivered with 
the auxiliary fuel tank installed, and therefore the actions specified 
in Boeing Special Attention Service Bulletin 777-28-0078, dated 
September 4, 2014, cannot be accomplished on those airplanes unless the 
auxiliary fuel tank is removed. This proposed AD does not require 
removal of the auxiliary fuel tank from airplanes in Group 10, 
Configuration 1, in accordance with the actions specified in Boeing 
Service Bulletin 777-28-0060, dated January 30, 2009; Revision 1, dated 
October 2, 2009; or Revision 2, dated January 08, 2010. However, if the 
auxiliary fuel tank is removed, this proposed AD requires 
accomplishment of the actions specified in Boeing Special Attention 
Service Bulletin 777-28-0078, dated September 4, 2014, prior to the 
threshold or concurrent with the auxiliary tank removal, and prohibits 
re-installation of the auxiliary fuel tank thereafter. Once 
modifications are developed and approved to address an airplane 
configuration having an auxiliary fuel tank installed, we might 
consider additional rulemaking to address the fuel scavenge system in 
those airplanes.
    For airplanes in Group 10, Configuration 2, Boeing Special 
Attention Service Bulletin 777-28-0078, dated September 4, 2014, 
specifies prior accomplishment of the actions described in Work Package 
2 of the Accomplishment Instructions of Boeing Service Bulletin 777-28-
0062, dated June 30, 2009; or Revision 1, dated November 18, 2010; 
which describes removal of one body auxiliary fuel tank (Work Package 1 
describes installation of the auxiliary fuel tank). Boeing

[[Page 27603]]

Special Attention Service Bulletin 777-28-0078, dated September 4, 
2014, does not address the configuration of airplanes with the 
auxiliary fuel tank installed. Group 10 airplanes are delivered with 
the auxiliary fuel tank installed, and therefore, the actions specified 
in Boeing Special Attention Service Bulletin 777-28-0078, dated 
September 4, 2014, cannot be accomplished on those airplanes unless the 
auxiliary fuel tank is removed. This proposed AD does not require 
removal of the auxiliary fuel tank from airplanes in Group 10, 
Configuration 2, in accordance with the actions specified in Work 
Package 2 of the Accomplishment Instructions of Boeing Service Bulletin 
777-28-0062, dated June 30, 2009; or Revision 1, dated November 18, 
2010. However, if the auxiliary fuel tank is removed, this proposed AD 
requires accomplishment of the actions specified in Boeing Special 
Attention Service Bulletin 777-28-0078, dated September 4, 2014, prior 
to the threshold or concurrent with the auxiliary tank removal, and 
prohibits re-installation of the auxiliary fuel tank thereafter. Once 
modifications are developed and approved to address an airplane 
configuration having an auxiliary fuel tank installed, we might 
consider additional rulemaking to address the fuel scavenge system in 
those airplanes.

Related Rulemaking

    AD 2011-09-05, Amendment 39-16667 (77 FR 22305, April 21, 2011), 
specifies the actions described in Boeing Service Bulletin 777-28A0047, 
Revision 5, dated September 20, 2010. For certain airplanes, the 
actions described in this service bulletin must be done prior to the 
accomplishment of the actions described in Boeing Special Attention 
Service Bulletin 777-28-0078, dated September 4, 2014.

FAA's Determination

    We are proposing this AD because we evaluated all the relevant 
information and determined the unsafe condition described previously is 
likely to exist or develop in other products of these same type 
designs.

Proposed AD Requirements

    This proposed AD would require accomplishing the actions specified 
in the service information described previously, except as discussed 
under ``Differences Between this Proposed AD and the Service 
Information.''
    The phrase ``related investigative actions'' might be used in this 
proposed AD. ``Related investigative actions'' are follow-on actions 
that: (1) Are related to the primary actions, and (2) are actions that 
further investigate the nature of any condition found. Related 
investigative actions in an AD could include, for example, inspections.
    In addition, the phrase ``corrective actions'' might be used in 
this proposed AD. ``Corrective actions'' are actions that correct or 
address any condition found. Corrective actions in an AD could include, 
for example, repairs.

Explanation of ``RC'' Steps in Service Information

    The FAA worked in conjunction with industry, under the 
Airworthiness Directive Implementation Aviation Rulemaking Committee 
(ARC), to enhance the AD system. One enhancement was a new process for 
annotating which steps in the service information are required for 
compliance with an AD. Differentiating these steps from other tasks in 
the service information is expected to improve an owner's/operator's 
understanding of crucial AD requirements and help provide consistent 
judgment in AD compliance. The steps identified as RC (required for 
compliance) in any service information identified previously have a 
direct effect on detecting, preventing, resolving, or eliminating an 
identified unsafe condition.
    Steps that are identified as RC in any service information must be 
done to comply with the proposed AD. However, steps that are not 
identified as RC are recommended. Those steps that are not identified 
as RC may be deviated from using accepted methods in accordance with 
the operator's maintenance or inspection program without obtaining 
approval of an alternative method of compliance (AMOC), provided the 
steps identified as RC can be done and the airplane can be put back in 
a serviceable condition. Any substitutions or changes to steps 
identified as RC will require approval of an AMOC.

Costs of Compliance

    We estimate that this proposed AD affects 55 airplanes of U.S. 
registry.
    We estimate the following costs to comply with this proposed AD:

                                                 Estimated costs
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
                Action                         Labor cost           Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
Fuel system modification..............  200 work-hours x $85 per         $68,535         $85,535      $4,704,425
                                         hour = $17,000.
P110 and P210 panel modification......  2 work-hours x $85 per                 0             170           9,350
                                         hour = $170.
----------------------------------------------------------------------------------------------------------------

    We have received no definitive data that would enable us to provide 
cost estimates for the on-condition actions specified in this proposed 
AD.
    According to the manufacturer, some of the costs of this proposed 
AD may be covered under warranty, thereby reducing the cost impact on 
affected individuals. We do not control warranty coverage for affected 
individuals. As a result, we have included all costs in our cost 
estimate.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:

[[Page 27604]]

    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

The Boeing Company: Docket No. FAA-2015-1273; Directorate Identifier 
2014-NM-194-AD.

(a) Comments Due Date

    We must receive comments by June 29, 2015.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to The Boeing Company Model 777-200, -200LR, -
300, -300ER, and -777F series airplanes, certificated in any 
category, as identified in Boeing Special Attention Service Bulletin 
777-28-0078, dated September 4, 2014.

(d) Subject

    Air Transport Association (ATA) of America Code 28, Fuel.

(e) Unsafe Condition

    This AD was prompted by reports of unreliable performance of the 
fuel scavenge system. We are issuing this AD to prevent fuel 
exhaustion and subsequent power loss of all engines due to loss of 
capability to scavenge fuel in the center fuel tank.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Fuel Scavenge System Changes, Wiring Changes, and Software Changes

    For airplanes identified in Boeing Special Attention Service 
Bulletin 777-28-0078, dated September 4, 2014, except for Group 10 
airplanes on which the actions specified in Boeing Service Bulletin 
777-28-0060; or Work Package 2 of the Accomplishment Instructions of 
Boeing Service Bulletin 777-28-0062, have not been accomplished: 
Within 60 months after the effective date of this AD, do the 
applicable actions specified in paragraphs (g)(1) through (g)(6) of 
this AD; and do all applicable related investigative and corrective 
actions; in accordance with the Accomplishment Instructions of 
Boeing Special Attention Service Bulletin 777-28-0078, dated 
September 4, 2014. Do all applicable related investigative and 
corrective actions before further flight.
    (1) Do applicable mechanical changes to the main fuel tank water 
scavenge system and center fuel tank fuel scavenge system.
    (2) Install relays and related equipment on the P301 and P302 
panels in the main equipment center.
    (3) Do applicable wiring changes between the P105, P110 and P301 
panels, and between the P200, P205, P210 and P302 panels.
    (4) Do wiring changes in the P105 panel.
    (5) Install new electrical load management system 2 (ELMS2) 
software.
    (6) Do a functional test consisting of operational tests, a leak 
test, system tests, and a fuel scavenge system functional test. If 
any of the tests fail, before further flight accomplish corrective 
actions and repeat the test and applicable corrective actions until 
the test is passed.

(h) Concurrent Actions

    (1) For Group 13 through 16 airplanes, as identified in Boeing 
Special Attention Service Bulletin 777-28-0078, dated September 4, 
2014, prior to accomplishing the actions required by paragraph (g) 
of this AD, install a new P301 panel on the left side of the 
airplane, install a new P302 panel on the right side of the 
airplane, and change the wiring; or perform bonding resistance 
measurements and rework the airplane installations; as applicable; 
in accordance with the Accomplishment Instructions of Boeing Service 
Bulletin 777-28A0047, Revision 5, dated September 20, 2010; or 
Boeing Service Bulletin 777-28A0047, Revision 6, dated July 11, 
2013.
    (2) For airplanes identified in Boeing Special Attention Service 
Bulletin 777-28-0078, dated September 4, 2014, except for Group 10 
airplanes on which the actions described in Boeing Service Bulletin 
777-28-0060; or Work Package 2 of the Accomplishment Instructions of 
Boeing Service Bulletin 777-28-0062, have not been accomplished: 
Prior to or concurrently with accomplishing the requirements of 
paragraph (g) of this AD, do wiring changes in the P110 and P210 
panels, in accordance with the applicable Accomplishment 
Instructions of GE Aviation Service bulletin 5000ELM-28-075, 
Revision 1, dated August 5, 2014; and GE Aviation Service Bulletin 
6000ELM-28-076, Revision 1, dated August 5, 2014.

(i) Parts Installation Prohibition

    For Group 10 airplanes, as identified in Boeing Special 
Attention Service Bulletin 777-28-0078, dated September 4, 2014, 
after completion of the actions required by paragraph (g) of this 
AD, no person may install an auxiliary fuel tank on any Group 10 
airplane.

(j) Credit for Previous Actions

    This paragraph provides credit for actions required by paragraph 
(h)(1) of this AD, if those actions were performed before May 26, 
2011 (the effective date of AD 2011-09-05, Amendment 39-16667 (77 FR 
22305, April 21, 2011)) using a service bulletin identified in 
paragraph (j)(1) or (j)(2) of this AD, which are not incorporated by 
reference in this AD.
    (1) Boeing Service Bulletin 777-28A0047, Revision 3, dated June 
11, 2009.
    (2) Boeing Service Bulletin 777-28A0047, Revision 4, dated May 
20, 2010.

(k) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Seattle Aircraft Certification Office (ACO), 
FAA, has the authority to approve AMOCs for this AD, if requested 
using the procedures found in 14 CFR 39.19. In accordance with 14 
CFR 39.19, send your request to your principal inspector or local 
Flight Standards District Office, as appropriate. If sending 
information directly to the manager of the ACO, send it to the 
attention of the person identified in paragraph (k)(1) of this AD. 
Information may be emailed to: 9-ANM-Seattle-ACO-AMOC-Requests@faa.gov.
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair required by this AD if it is approved by the 
Boeing Commercial Airplanes Organization Designation Authorization 
(ODA) that has been authorized by the Manager, Seattle ACO, to make 
those findings. For a repair method to be approved, the repair must 
meet the certification basis of the airplane, and the approval must 
specifically refer to this AD.
    (4) If any service information contains steps that are 
identified as RC (Required for Compliance), those steps must be done 
to comply with this AD; any steps that are not identified as RC are 
recommended. Those steps that are not identified as RC may be 
deviated from using accepted methods in accordance with the 
operator's maintenance or inspection program without obtaining 
approval of an AMOC, provided the steps identified as RC can be done 
and the airplane can be put back in a serviceable condition. Any 
substitutions or changes to steps identified as RC require approval 
of an AMOC.

(l) Related Information

    (1) For more information about this AD, Tak Kobayashi, Aerospace 
Engineer, Propulsion Branch, ANM-140S, FAA, Seattle Aircraft 
Certification Office, 1601 Lind Avenue SW., Renton, WA 98057-3356; 
phone: 425-917-6499; fax: 425-917-6590; email: 
Takahisa.Kobayashi@faa.gov.

[[Page 27605]]

    (2) For Boeing service information identified in this AD, 
contact Boeing Commercial Airplanes, Attention: Data & Services 
Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; 
telephone 206-544-5000, extension 1; fax 206-766-5680; Internet 
https://www.myboeingfleet.com. For GE Aviation service information 
identified in this proposed AD, contact GE Aviation Fleet Support, 1 
Neumann Way, Cincinnati, OH 45215; telephone 513-552-3272; Email: 
aviation.fleetsupport@ge.com; Internet https://www.geaviation.com. 
You may view this referenced service information at the FAA, 
Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
Washington. For information on the availability of this material at 
the FAA, call 425-227-1221.

    Issued in Renton, Washington, on April 28, 2015.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2015-10469 Filed 5-13-15; 8:45 am]
 BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.